Cross-Coupling of Diarylborinic Acids and Anhydrides with Arylhalides Catalyzed by a Phosphite/N-Heterocyclic Carbene Co-supported Palladium Catalyst System

A highly efficient cross-coupling of diarylborinic acids and anhydrides with aryl chlorides and bromides has been effected by using a palladium catalyst system co-supported by a strong σ-donor N-heterocyclic carbene (NHC), N,N'-bis(2,6-diisopropylphenyl) imidazol-2-ylidene, and a strong π-acceptor phosphite, triphenylphosphite, in tert-BuOH in the present of K(3)PO(4)·3H(2)O. Unsymmetrical biaryls with a variety of functional groups could be obtained in good to excellent yields using as low as 0.01, 0.2-0.5, and 1 mol % palladium loadings for aryl bromides and activated and deactivated aryl chlorides, respectively, under mild conditions. A ligand synergy between the σ-donor NHC and the π-acceptor phosphite in the Pd/NHC/P(OPh)(3) catalytic system has been proposed to be responsible for the high efficacy to arylchlorides in the cross-coupling. A scalable and economical process has therefore been developed for synthesis of Sartan biphenyl from the Pd/NHC/P(OPh)(3) catalyzed cross-coupling of di(4-methylphenyl)borinic acid with 2-chlorobenzonitrile.     

Palladium-catalyzed highly stereoselective synthesis of N-aryl-3-arylmethylisoxazolidines via tandem arylation of O-homoallylhydroxylamines

The palladium-catalyzed tandem arylation of O-homoallylhydroxylamines with 2 equiv of aryl bromides was examined. With Pd2(dba)3 (1 mol %) as the catalyst, Xantphos (2 mol %) as the ligand, and NaOt-Bu as the base, the reactions of O-homoallylhydroxylamines with aryl bromides via sequential N-arylation/cyclization/C-arylation in toluene afforded the corresponding N-aryl-3-arylmethylisoxazolidines in good yields with excellent diastereoselectivity.     

Cross‐Electrophile Coupling of Vinyl Halides with Alkyl Halides

An improved method for the reductive coupling of aryl and vinyl bromides with alkyl halides that gave high yields for a variety of substrates at room temperature with a low (2.5 to 0.5 mol %) catalyst loading is presented. Under the optimized conditions, difficult substrates, such as unhindered alkenyl bromides, can be coupled to give the desired olefins with minimal diene formation and good stereoretention. These improved conditions also worked well for aryl bromides. For example, a gram‐scale reaction was demonstrated with 0.5 mol % catalyst loading, whereas reactions at 10 mol % catalyst loading completed in as little as 20 minutes. Finally, a low‐cost single‐component pre‐catalyst, (bpy)NiI₂ (bpy=2,2′‐bipyridine) that is both air‐ and moisture‐stable over a period of months was introduced.     

Efficient copper-catalyzed S-vinylation of thiols with vinyl halides

The synthesis of vinyl sulfides through the coupling reaction of thiols with vinyl iodides, bromides, and chlorides is described. The thiols can couple with aryl iodides in the presence of only 0.5 mol % Cu(2)O without the need for an ancillary ligand. In the presence of 5 mol % of Cu(2)O and 10 mol % 1,10-phenanthroline as the ligand, the more challenging alkyl vinyl bromides can also be coupled with thiols, giving the vinyl sulfides in good to excellent yields.     

Improved synthesis of aryltriethoxysilanes via palladium(0)-catalyzed silylation of aryl iodides and bromides with triethoxysilane.

The scope of the palladium-catalyzed silylation of aryl halides with triethoxysilane has been expanded to include aryl bromides. A more general Pd(0) catalyst/ligand system has been developed that activates bromides and iodides: palladium(0) dibenzylideneacetone (Pd(dba)(2)) is activated with 2-(di-tert-butylphosphino)biphenyl (Buchwald's ligand) (1:2 mol ratio of Pd/phosphine). Electron-rich para- and meta-substituted aryl halides (including unprotected aniline and phenol derivatives) undergo silylation to form the corresponding aryltriethoxysilane in fair to excellent yield; however, ortho-substituted aryl halides failed to be silylated.     

Palladium-catalyzed alpha-arylation of esters and amides under more neutral conditions

Two procedures for the alpha-arylation of carbonyl compounds under conditions that are more neutral than those of reactions of aryl halides with alkali metal enolates are reported. The first procedure rests upon the development of catalysts bearing the hindered pentaphenylferrocenyl di-tert-butylphosphine (Q-phos) and the highly reactive dimeric Pd(I) complex {P(t-Bu)3]PdBr}2. By this procedure, zinc enolates prepared from alpha-bromo esters and amides react with aryl halides to form alpha-aryl esters and amides in high yields under mild conditions with 1-2 mol % catalyst and with remarkable functional group tolerance. By the second procedure, silyl ketene and silyl ketimine acetals react with aryl bromides in the presence of substoichiometric zinc fluoride, 1 mol % Pd(dba)2, and 2 mol % P(t-Bu)3 in DMF solvent at 80 degrees C. Reactions of zinc tert-butyl acetate and propionate enolates and trimethylsilyl ketene acetals of tert-butyl propionate and methyl isobutyrate with aryl bromides bearing electron-donating and potentially reactive, base-sensitive electron-withdrawing groups and with pyridyl bromides are reported. In addition, the diastereoselective coupling of phenyl bromide with an imide enolate bearing the Evans auxiliary is reported, and this study shows that racemization of base-sensitive stereocenters does not occur during the coupling process under these more neutral conditions.     

Synthesis of unsymmetrical aroyl acyl imides by aminocarbonylation of aryl bromides.

Aroyl imides were prepared by a palladium-catalyzed aminocarbonylation reaction of aryl bromides with carbon monoxide and primary amides in good yields (58-72%). The reactions were carried out under mild conditions (5 bar, 120 degrees C) using 1 mol % of a palladium phosphine complex. Several aryl bromides were reacted with formamide, acetamide, benzamide, and benzenesulfonamide, respectively. For activated aryl bromides, a phosphine-to-palladium ratio of 2:1 was sufficient, but less reactive aryl bromides required a ligand-to-palladium ratio of 6:1 in order to stabilize the catalyst and achieve full conversion. The imides were very sensitive to aqueous basic conditions and were easily converted to aroyl amides or benzoic acids.     

3-（Diphenylphosphino）propanoic acid： An efficient ligand for the Cu-catalyzed N-arylation of imidazoles and 1H-pyrazole with aryl halides

3-(Diphenylphosphino)propanoic acid(L2) has proved to be an efficient ligand for the copper-catalyzed C–N coupling reactions.N-arylation of imidazoles with aryl iodides catalyzed by CuCl/L2 was smoothly carried out in DMSO at 100 8C with a yield up to 98%.N-arylation of 1H-pyrazole with aryl iodides and bromides catalyzed by Cu(OAc)2/L2 in 1 4-dioxane also gave the corresponding products with yields of40%–98%.     

Homogeneous catalysts supported on soluble polymers: biphasic Sonogashira coupling of aryl halides and acetylenes using MeOPEG-bound phosphine-palladium catalysts for efficient catalyst recycling

The Sonogashira coupling of various aryl bromides and iodides with different acetylenes was studied under biphasic conditions with soluble, polymer-modified catalysts to allow the efficient recycling of the homogeneous catalyst. For this purpose, several sterically demanding and electron-rich phosphines of the type R(P)PR(2) were synthesised. They are covalently linked to a monomethyl polyethylene glycol ether with a mass of 2000 Dalton (R(P)=MeOPEG(2000)) R(P)PR(2): -PR(2)= -CH(2)C(6)H(4)CH(2)P(1-Ad)(2), -C(6)H(4)-P(1-Ad)(2), -C(6)H(4)-PPh(2). To couple aryl iodides and acetylenes, the catalyst [(MeCN)(2)PdCl(2)]/2 R(P)-C(6)H(4)-PPh(2) was used in CH(3)CN/Et(3)N/n-heptane (5/2/5). The combined yields of coupling product over five reaction cycles are between 80-95 percent. There is no apparent leaching of the catalyst into n-heptane, as evidenced by (1)H NMR spectroscopy. The new catalyst [(MeCN)(2)PdCl(2)]/2 (1-Ad)(2)PBn can be used for room-temperature coupling of various aryl bromides and acetylenes in THF with HNiPr(2) as a base. A closely related catalyst Na(2)[PdCl(4)]/2 R(P)-CH(2)C(6)H(4)CH(2)P(1-Ad)(2) linked to the polymer was used to couple aryl bromides and acetylenes in DMSO or DMSO/n-heptane at 60 degrees C with 0.5 mol percent Na(2)[PdCl(4)], 1 mol percent R(P)PR(2) and 0.33 mol percent CuI. The combined yield of coupling products over five cycles is always greater than 90 percent, except for sterically hindered aryl bromides. The determination of the turnover frequency (TOF) of the catalyst indicates only a small decrease in activity over five cycles. Leaching of the catalyst into the product containing n-heptane solution could not be detected by means of (1)H NMR and TXRF; this is indicative of >99.995 percent catalyst retention in the DMSO solvent.     

Palladium-catalyzed cross-coupling reactions between dihydropyranylindium reagents and aryl halides. synthesis of C-aryl glycals

[reaction: see text] Palladium(0)-catalyzed cross-coupling reactions between tris(dihydropyranyl)indium 1 and aryl halides 2 have been investigated. Aryl iodides and electron-deficient aryl bromides couple efficiently with the in situ-generated indium reagents in the presence of 1-5 mol % Cl(2)Pd(PPh(3))(2) to produce substituted dihydropyrans 3 with minimal (<10%) dimer (4) formation. Organoindium reagents derived from D-glucal also undergo cross couplings with aryl iodides to produce C-aryl glycals.     

An Alternative Approach to PEPPSI Catalysts: From Palladium Isonitriles to Highly Active Unsymmetrically Substituted PEPPSI Catalysts

A series of new pyridine‐enhanced precatalyst preparation, stabilization, and initiation (PEPPSI)‐type complexes bearing different types of carbene ligands was prepared by the modular and convergent template synthesis strategy. Nitrogen acyclic carbenes, saturated and unsaturated five‐membered NHC, saturated six‐membered NHCs, and five‐membered N‐heterocyclic oxo‐carbene (NHOC) ligands on palladium were prepared this way. These new organometallic compounds then were tested in Suzuki and Negishi cross‐coupling reactions by using substrates with one or two substituents in ortho‐position of the new C?C bond being formed. Both aryl chlorides and bromides were tested as coupling partners. In some cases, the new ligands gave results similar to Organ’s successful IPr‐based and IPent‐based PEPPSI derivatives, with aryl bromides 0.05 mol % catalyst load still gave satisfactory results, with aryl chlorides 0.5 mol % were needed.     

Improvements in cross coupling reactions of hypervalent siloxane derivatives

[formula: see text] The scope of the palladium-catalyzed cross coupling reaction of aryl halides with phenyltrimethoxysilane has been expanded to include aryl bromides, heteroaryl bromides, and aryl chlorides. A more general Pd(0)-catalyst/ligand system has been developed to activate bromides: palladium(II) acetate (Pd(OAc)2) is activated with triphenylphosphine (PPh3) or tri-o-tolylphosphine (P(o-tol)3) (1:2 molar ratio of Pd:phosphine). Coupling of aryl chloride derivatives required addition of 2-(dicyclohexylphosphino)biphenyl (Buchwald's ligand) to Pd2dba3 (tris-(dibenzylideneacetone)dipalladium(0)) (1:1.5 molar ratio of Pd:phosphine).     

Facile synthesis of 2-bromo-3-fluorobenzonitrile: an application and study of the halodeboronation of aryl boronic acids

A scaleable synthesis of 2-bromo-3-fluorobenzonitrile via the NaOMe-catalyzed bromodeboronation of 2-cyano-6-fluorophenylboronic acid was developed. The generality of this transformation was demonstrated through the halodeboronation of a series of aryl boronic acids. Both aryl bromides and aryl chlorides were formed in good to excellent yields when the corresponding aryl boronic acid was treated with 1,3-dihalo-5,5-dimethylhydantoin and 5 mol % NaOMe.     

A facile one-pot preparation of potassium hydroxyaryl- and (hydroxyalkyl)aryltrifluoroborates

Potassium hydroxyaryl- and (hydroxyalkyl)aryltrifluoroborates have been prepared in a simple one-pot process from the corresponding hydroxy-substituted aryl halides in 51-98% yields through an in situ protection of the free hydroxyl group with t-BuLi. Also, we successfully performed a microwave-promoted Suzuki-Miyaura cross-coupling reaction of these substrates with aryl- and alkenyl bromides in the presence of 0.5 mol % of Pd(OAc)2 catalyst without ligands.     

Palladium-catalyzed direct arylation of heteroaromatic compounds: improved conditions utilizing controlled microwave heating

A versatile and rapid microwave-assisted procedure for the palladium-catalyzed direct arylation of heterocycles by aryl bromides and heteroaryl bromides is described. This novel protocol features short coupling times (10-60 min) and low catalyst loadings (1 mol %) and allows the successful arylation of previously unreactive heterocyclic substrates.     

Palladium-catalyzed direct arylation of thiophenes bearing SO2R substituents

The palladium-catalyzed direct arylation of SO(2)R-substituted thiophene derivatives was found to proceed regioselectively at C5 and in high yields using a variety of aryl bromides and as low as 0.5-0.1 mol % of phosphine-free Pd(OAc)(2) as the catalyst. For these reactions, sulfonyls, sulfonamides, or even a sulfonic ester as the thiophene substituents were successfully employed.     

Reduction of Aryl Thiocyanates with SmI(2) and Pd-Catalyzed Coupling with Aryl Halides as a Route to Mixed Aryl Sulfides

A series of aryl iodides, with a range of substituents, has been successfully coupled using 10 mol % Pd catalyst with samarium thiolates, derived from the corresponding aryl thiocyanates upon reductive cleavage with SmI(2). Reactions proceed in THF at 65 degrees C in yields ranging from good to excellent and are compatible with both electron-donating and electron-withdrawing substituents, except NO(2). The reactions may also be conducted with aryl bromides although with somewhat lower yields.     

铋系超导体组成分析

本文首次提出了一种离子交换柱分离——滴定法测定Bi系超导体中Bi、Pb、Cu、Ca和Sr含量的方法。研究了进样条件和淋洗方法,特别是Bi~(3+)在微酸性溶液中的亚稳态进样。测定合成样品时,Bi、Pb、Cu、Ca和Sr的相对标准偏差分别为0.7％、1.6％、0.5％、0.4％和0.2％。分析了超导体样品,并测定了其中Cu~(3+)。     

A general and efficient copper catalyst for the amidation of aryl halides

An experimentally simple and inexpensive catalyst system was developed for the amidation of aryl halides by using 0.2-10 mol % of CuI, 5-20 mol % of a 1,2-diamine ligand, and K(3)PO(4), K(2)CO(3), or Cs(2)CO(3) as base. Catalyst systems based on N,N'-dimethylethylenediamine or trans-N,N'-dimethyl-1,2-cyclohexanediamine were found to be the most active even though several other 1,2-diamine ligands could be used in the easiest cases. Aryl iodides, bromides, and in some cases even aryl chlorides can be efficiently amidated. A variety of functional groups are tolerated in the reaction, including many that are not compatible with Pd-catalyzed amidation or amination methodology.     

Efficient palladium-catalyzed homocoupling reaction and Sonogashira cross-coupling reaction of terminal alkynes under aerobic conditions

An efficient method for palladium-catalyzed homocoupling reaction of terminal alkynes in the synthesis of symmetric diynes is presented. The results showed that both Pd(OAc)(2) and CuI played crucial roles in the reaction. In the presence of 2 mol % Pd(OAc)(2), 2 mol % CuI, 3 equiv of Dabco, and air, homocoupling of various terminal alkynes afforded the corresponding symmetrical diynes in moderate to excellent yields, whereas low yields were obtained without either Pd(OAc)(2) or CuI. Moreover, high TONs (turnover numbers; up to 940 000 for the reaction of phenylacetylene) for the homocoupling reaction were observed. Under similar reaction conditions, cross-coupling of 1-iodo-4-nitrobenzene with phenylacetylene was also carried out smoothly in quantitative yield. However, the presence of CuI disfavored the palladium-catalyzed Sonogashira cross-coupling reactions of the less active aryl iodides and bromides. In the presence of 0.01-2 mol % Pd(OAc)(2), a number of aryl iodides and bromides were coupled with terminal alkynes in good to excellent yields. It is noteworthy that this protocol employs mild, efficient, aerobic, copper-free, and ligand-free conditions.