极性/非极性接枝共聚物PVIPA-g-PIB的合成研究

通过自由基共聚合方法,以AIBN为引发剂引发醋酸乙烯酯(VAc)和醋酸异丙烯酯(IPA)共聚,得到两者的无规共聚物聚(PVIPA).再以PVIPA作为大分子引发剂,以四氯化钛(TiCl4)为共引发剂,引发异丁烯进行正离子接枝共聚反应,分别考察了PVIPA/TiCl4/IB体系中TiCl4浓度、大分子引发剂浓度、陈化温度、陈化时间以及外加含氮亲核试剂2,6-二甲基吡啶(DMP)对异丁烯聚合转化率和PVIPA引发效率的影响,并采用GPC表征方法研究了聚合体系中两种引发活性中心(A)和(B)的引发竞争.实验结果表明,在没有外加亲核试剂的情况下,PVIPA与微量水均可参与与TiCl4的络合竞争,分别形成活性中心(A)和(B),并产生竞争引发异丁烯正离子聚合,生成相应的接枝共聚物PVIPA-g-PIB和均聚物PIB.TiCl4和PVIPA用量以及两者的络合作用温度与时间对异丁烯正离子接枝共聚起着重要作用.合适的TiCl4浓度与PVIPA浓度、低的微量水浓度以及在较低温度下使PVIPA与TiCl4充分络合,都有利于提高大分子引发剂PVIPA的引发效率.引发效率可以达到90%左右,并可制备出极性主链与非极性支链的接枝共聚物PVIPA-g-PIB,其GPC谱图呈现单峰分布,分子量分布(Mw/Mn)可达到2.17.此外,在聚合体系中加入适量含氮亲核试剂DMP,一定程度上可以提高PVIPA的引发效率.     

H_2O/TiCl_4/Py体系引发苯乙烯正离子聚合

研究了在少量吡啶(Py)存在下由水(H2O)四氯化钛(TiCl4)体系引发苯乙烯于二氯甲烷正己烷中进行碳正离子聚合,分别考察[Py]、[H2O]和[TiCl4]对聚合速率、产物分子量与分子量分布的影响.实验结果表明,少量亲核试剂吡啶(Py)对聚合反应起着重要作用,可有效地降低聚合速率和使分子量分布变窄;随着[H2O]和[Py]降低或[TiCl4]增加,聚合产物的分子量增加,而分子量分布指数(Mw Mn)基本维持在1.8左右;随着[Py]增加,聚合速率降低;随着[H2O]和[TiCl4]增加,聚合速率提高.聚合速率对单体浓度呈一级动力学关系,对Py、H2O和TiCl4的反应级数分别为-0.72、0.72和1.86.聚合速率对TiCl4浓度呈接近二级动力学关系,这可能与体系中TiCl4主要以二聚体形式存在有关.聚合转化率和产物分子量均随着反应时间延长而逐渐增大,PS的数均分子量与转化率呈线性增加关系.     

吡啶类试剂调节H_2O/TiCl_4引发苯乙烯正离子聚合研究

1988年,Kennedy等[1~3]首先实现了由BCl3共引发的苯乙烯(St)及其衍生物活性正离子聚合,但所得到聚合产物的分子量分布宽(Mw/Mn=5~6).苯乙烯活性正离子聚合的共引发剂由BCl3扩展到SnCl4、TiCl4[4~7]和TiCl3(OiPr).对于TiCl4共引发的St活性正离子聚合,所用引发剂为2,4,4-三甲基-2     

硫氰基/有机铜锂体系引发MMA阴离子聚合研究

采用有机锂为引发剂,以甲基丙烯酸酯（MMA）类为单体进行阴离子聚合,其副反应较严重,因为在此类单体分子中存在卢碳和羰基碳两个亲核点,引发剂进攻羰基碳则会使链终止,在聚合过程中发生各种副反应,以碱金属（Li,Na,K）为反离子的有机碳负离子化合物,其亲核性较强,倾向于进攻羰基碳,因此甲基丙烯酸酯类单体的阴离子聚合除了采用较大立体阻碍引发剂外。     

亲核试剂在正离子聚合反应中的作用及其作用机理的研究

研究了亲核试剂对IB 1 ,3 二 (2 氯异丙基 )苯 (DiCumCl) TiCl4体系正离子聚合反应的规律 ,亲核试剂与增长的碳正离子作用的紫外光谱图 ;采用分子模拟 ,利用量子力学半经验方法计算了亲核试剂与质子反应的活化能 ,确定了不同亲核试剂与质子的作用能力 ;利用分子力学方法计算了在增长碳正离子末端的不同位置亲核试剂与之络合的稳定化能 ,根据能量最低原则确定了亲核试剂在碳正离子链端的作用位置 ;利用分子力学方法进行构象优化后 ,借助QEq方法得到了聚异丁烯碳正离子和聚苯乙烯碳正离子的电荷数值 .综合以上实验结果提出了亲核试剂在正离子聚合反应中的作用及其作用机理     

哌啶氧铵盐对醇氧化反应的活性和选择性

系统地研究了12种具有不同4-位取代基(R=H、CH~3O、Cl)及反离子(X=Cl、BF~4、ClO~4、Br或Br~3)的2, 2, 6, 6-四甲基哌啶氧铵盐对醇的氧化反应, 发现这些氧铵盐都能以很高的由率将一级醇氧化为醛, 二级醇氧化为酮。氧化反应的活性与4-位取代基及反离子有关。当反离子相同时, 反应活性的顺序为Cl>CH~3O>H;当4-位取代基相同时, 反应活性的顺序为Cl^-》BF~4^->ClO~4^->Br^-。氧化反应的选择性主要与反离子有关, 当反离子为Cl^-时, 主要氧化一级醇; 当反离子为BF~4^-、ClO~4^-、Br^-或Br~3^-时, 主要氧化二级醇。     

TiCl4共引发异丁烯正离子聚合合成反应活性聚异丁烯

由H2O/TiCl4/甲醇或乙醚体系引发异丁烯在二氯甲烷与己烷混合溶剂中进行正离子聚合,探讨甲醇用量、聚合时间等因素对正离子聚合以及产物分子量、分子量分布和末端基结构的影响,并在此基础上探讨TiCl4共引发混合C4馏分中异丁烯选择性正离子聚合以制备活性聚异丁烯的可行性.结果表明,含氧试剂对聚合反应起到明显的调节作用,可适当稳定碳正离子活性中心,降低链增长速率,降低聚合产物的分子量(Mn=1600~4600),使分子量分布明显变窄(Mw/Mn=1.35~2.05),并可调节大分子链末端基结构及其含量.降低聚合体系中微量单体浓度以及适当延长聚合反应时间,均有利于提高聚异丁烯大分子链末端α-双键结构含量.通过TiCl4共引发异丁烯正离子聚合制备出末端α-双键含量可以达到70%以上的低分子量高反应活性聚异丁烯.此外,该引发体系还可引发混合C4馏分原料中异丁烯进行高选择性正离子聚合,得到Mn=2000、Mw/Mn=2.59、端基α-双键含量为38.9%的聚异丁烯.     

聚醋酸乙烯酯和共聚物大分子引发剂引发异丁烯正离子接枝共聚合反应

以AIBN为引发剂,通过自由基聚合方法先合成一定分子量(Mn=1.9×104g mol)和分子量分布(MWD,Mw Mn<2.5)的聚醋酸乙烯酯(PVAc)和醋酸乙烯酯(VAc)与醋酸异丙烯酯(IPAc)的无规共聚物聚(PVIPA).再以PVAc或PVIPA作为大分子引发剂,与共引发剂TiCl4配合,引发异丁烯进行正离子接枝共聚反应,并分别考察大分子引发剂用量、TiCl4浓度以及添加剂2,6二叔丁基吡啶(DtBP)或2甲基吡啶(MPY)对异丁烯聚合转化率和PVIPA或PVAc引发效率的影响,并进一步表征接枝共聚物的微观结构与组成含量.实验结果表明,PVIPA和PVAc可引发异丁烯进行正离子接枝共聚反应,前者的引发效率高于后者.加入适量DtBP或MPY时,可不同程度地提高引发效率.DtBP对减少聚合体系中微量水的引发和提高PVAc引发效率的作用更为明显,引发效率可达90%以上,加入适量添加剂MPY时,PVIPA引发效率可达60%左右.适当增加大分子引发剂用量和TiCl4浓度,也可提高PVIPA的引发效率至接近70%.在合适的实验条件下,可以得到极性主链为PVIPA与非极性支链为聚异丁烯(35.2%mol)的接枝共聚物PVIPA g PIB,该接枝共聚物的Mn为3.7×104g mol,分布指数MWD为2.52,且PIB支链平均分子量约为5.4×103g mol.     

活性正离子聚合与原子转移自由基聚合转换合成聚β-蒎烯接枝共聚物

通过活性正离子聚合与原子转移自由基聚合(ATRP)转换合成了β-蒎烯与甲基丙烯酸甲酯(MMA)、丙烯酸丁酯(BA)、苯乙烯(St)的新型接枝共聚物.首先以α-氯代乙苯/TiCl4/Ti(OiPr)4/nBu4NCl体系引发β-蒎烯活性正离子聚合,合成预定分子量大小和窄分子量分布的聚β-蒎烯,然后经N-溴代琥珀酰亚胺(NBS)定量溴化,得到溴化聚β-蒎烯大分子引发剂(Br/β-蒎烯链节摩尔比为0.5).然后将该大分子引发剂与溴化亚铜(CuBr)/2,2′-联吡啶(bpy)复合,引发MMA、BA、St进行ATRP接枝聚合.接枝反应显示一级动力学特征,且产物的分子量及分子量分布可控,表明上述ATRP接枝聚合反应具有可控聚合特征.接枝产物的结构经1H-NMR分析得到进一步证实.     

EHP引发AM/DMMC反相微乳液聚合的研究

以油酸失水山梨醇酯Span80和壬基酚聚氧乙烯醚OP-10为乳化剂，白油为连续介质，过氧化二碳酸（2-乙基已酯）（EHP）为引发剂，进行丙烯酰胺/（2-甲基丙烯酰氧乙基）三甲基氯化铵（AM/DMMC）反相微乳液共聚合反应。研究了ωM=0.25-0.50范围内单体总浓度[M]、引发剂浓度[I]、乳化剂浓度[E]对聚合速率Rp和共聚物分子量M^-V的影响，得到Rp∝[M]^2.47[I]^0.76[E]^0.19,M^-v∝[M]^2.05[I]^-0.37[E]^-0.47。测定了AM/DMMC反相微乳液共聚合中单体的竞聚率，得到rAM=0.44,rDMMC=1.31。     

HES/TiCl4体系引发异丁烯可控正离子聚合

由六官能团引发剂环氧化角鲨烯(HES)与TiCl4组成引发体系,引发异丁烯(IB)在CH2Cl2/n-Hex(40/60,V/V)混合溶剂中进行正离子聚合,分别探讨了HES和2,6-二甲基吡啶(DMP)用量对IB正离子聚合转化率、产物分子量及其分布的影响.结果表明HES和微量水均可与TiCl4发生络合,并分别形成碳正离子和质子两种引发活性中心,导致聚合产物GPC谱图呈明显双峰分布.增加引发剂HES用量([HES]=2.64mmol/L),可以减少聚合体系中微量水的不可控引发,提高HES引发效率;在聚合体系中引入少量DMP时,可明显地减少微量水的不可控引发和提高HES的引发效率,使得即使在较低HES用量下([HES]=0.084mmol/L),也可达到主要由HES引发IB正离子聚合,制备出官能叔氯末端的六臂星形支化遥爪聚异丁烯,GPC谱图呈现单峰分子量分布,分布指数为1.5左右.     

活性正离子聚合制备聚(异丁烯-b-α-甲基苯乙烯)嵌段共聚物

以2-氯-2,4,4-三甲基戊烷(TMPCl)/TiCl4/质子捕捉剂(DtBP)为引发剂体系,引发异丁烯聚合,随后加入1,1-二(4-甲基苯基)乙烯作为封端剂稳定末端碳正离子,再引入四异丙醇钛(Ti(OiPr)4),降低Lewis酸性,继续引发α-甲基苯乙烯聚合,实现活性正离子聚合制备聚(异丁烯-b-α-甲基苯乙烯)嵌段共聚物.考察了α-甲基苯乙烯聚合时间对单体转化率、产物的dn/dc值、分子量及其分布的影响以及四异丙醇钛对聚合速率的影响.并通过体积排斥色谱法/紫外检测器/示差折光指数/多角激光光散射、1H-NMR以及DSC以对产物进行表征.实验结果表明,嵌段共聚物分子量分布窄(MWD≤1.2),单体转化率与分子量呈线性关系,聚合速率对单体浓度呈一级动力学关系,具有活性聚合的特征.Ti(OiPr)4能有效稳定活性中心,降低聚合速率.聚(异丁烯-b-α-甲基苯乙烯)嵌段共聚物的DSC测试发现明显的两个Tg,表明存在微相分离结构.     

A combined experimental and theoretical study of the kinetics and mechanism of the addition of alcohols to electronically stabilized silenes: a new mechanism for the addition of alcohols to the Si=C bond

The stabilized silene 1,1-bis(trimethylsilyl)-2-adamantylidenesilane (4) has been generated by photolysis of a novel trisilacyclobutane derivative in various solvents and studied directly by kinetic UV spectrophotometry. Silene 4 decays with second-order kinetics in degassed hexane solution at 23 degrees C (k/epsilon = 8.6 x 10(-6) cm s(-1)) due to head-to-head dimerization. It reacts rapidly with oxygen [k(25 degrees C) approximately 3 x 10(5) M(-1) s(-1)] but approximately 10 orders of magnitude more slowly with methanol (MeOH) than other silenes that have been studied previously. The data are consistent with a mechanism involving reaction with the hydrogen-bonded dimer of the alcohol, (MeOH)(2) (k = 40 +/- 3 M(-1) s(-1); k(H)/k(D) = 1.7 +/- 0.2). The stable analogue of silene 4, 1-tert-butyldimethylsilyl-1-trimethylsilyl-2-adamantylidenesilane (5), reacts approximately 50 times more slowly, but via the same mechanism. The mechanism for addition of water and methanol (ROH; R = H, Me) to 4, 5, and the model compound 1,1-bis(silyl)-2,2-dimethylsilene (3a) has been studied computationally at the B3LYP/6-31G(d) and MP2/6-31G(d) levels of theory. Hydrogen-bonded complexes with monomeric and dimeric methanol, in which the Si=C bond plays the role of nucleophile, have been located computationally for all three silenes. Reaction pathways have been characterized for reaction of the three silenes with monomeric and dimeric ROH and reveal significantly lower barriers for reaction with the dimeric form of the alcohol in each case. The calculations indicate that 5 should be approximately 40-fold less reactive toward dimeric MeOH than 4, in excellent agreement with the approximately 50-fold difference in the experimental rate constants for reaction in hexane solution.     

STUDIES ON TiCI4/Mg (OEt)_2/EB SUPPORTED CATALYSTS FOR PROPYLENE POLYMERIZATION

The supported catalysts for propylene polymerization were prepared by milling Mg (OEt)_2 with EB (ethylbenzoate) and treating with TiCl_4 solution. When TiCl_4/(Mg(OEt)_2/EB) (mol.) ratio was increased, decrease in contents of-OEt and Ti of the catalysts was observed, while the content of EB increased. It is proved by analyses of IR, X-ray and XPS that during co-milling Mg(OEt)_2 with EB no reactions have taken place. But after treatment with TiCl_4 solution, Mg(OEt)_2 converts into MgCl_2 and EB coordinates on the resulting MgCl_2 carrier, a surface complex forms.The activity of catalysts,isotacticity and vicosimetric molecular weight of polypropylene increase with the decrease of the content of ethoxyl group. The kinetic curves of propene polymerization obtained with present catalysts system display decay curves. It is found from the triad tacticity calculated from the expanded spectra of methyl carbon region that, ethoxyl group in catalyst has an effect on the configuration of polymer chain.     

The deoxygenation kinetics of new oxovanadium(IV) complexes

Summary The deoxygenation reaction kinetics of some monomeric, dimeric and polymeric oxovanadium(IV) complexes with SOCl₂ have been studied by the stopped-flow technique in DMF. The reaction is bimolecular and obeys second-order kinetics; first-order in both SOCl₂ and complex. The polymeric halogeno product decays with time, but at a rate much slower compared to the rate of its formation. The correlation observed between the structure of these complexes and their reactivities is discussed.     

Dimerization and protonation reactions of nitrosonitrobenzenes radical anions

The electrochemical behavior of 2-, 3-, and 4-nitrosonitrobenzenes (NNB) in DMF (with Bu₄NClO₄ suppoting salt) in the presence and in the absence of different proton donors (water, phenol, benzoic, acetic, chloroacetic, and sulfuric acids) is studied by the methods of cyclic voltammetry, chronoamperometry and also by electrolysis at the controlled potential. The electrochemical reduction of these compounds is shown to preferentially afford either monomeric (N-nitrophenylhydroxylamines) or dimeric (azoxy compounds) products, which is determined by the interplay between reactions of protonation and dimerization of NNB radical anions. The dimerization reactions proceed fast and reversibly to afford the corresponding dimeric dianions with the basicity much higher as compared with NNB radical anions as the result of which the monomeric products are formed in the presence of “strong” proton donors and the dimeric products form in the presence of “weak” proton donors. Like the effective rate of formation of dimeric products, the basicity of radical anions increases in the row 4- < 3- < 2-NNB.