Coordination polyhedron and chemical vapor deposition of Cu(hfacac)2(t-BuNH2)

A new pentacoordinate Cu(II) complex, Cu(hfacac)(2)(t-BuNH(2)) [hfacac = CF(3)C(O)CHC(O)CF(3)(-), t-BuNH(2) = tert-butylamine], has been synthesized and structurally characterized. Interestingly, the structure of a single crystal occurred as square pyramidal with one O atom at the apical position and one N and three O atoms at the basal positions, showing a serious degree of distortion. This contrasts with the square-pyramidal structure of Cu(hfacac)(2)L (L = H(2)O and pyrazine), which has the L ligand at the axial position. In the Cu(hfacac)(2)(t-BuNH(2)) complex, the t-BuNH(2) ligand is placed at an equatorial position with a lowered angle by 19.9(2) degrees from the basal plane. This distortion seems to reduce sigma influence and steric hindrance and so stabilizes the square-pyramidal geometry. This precursor has a lower melting point and superior stability to air, moisture, and heat than the Cu(hfacac)(2)(xH(2)O) precursor. The deposition rate of copper oxide film on a Pt layer above 450 degrees C was nearly constant with increasing temperature, indicating a mass transport limited reaction. Therefore it would be a useful metal organic chemical vapor deposition precursor for the fabrication of copper oxide film or superconducting materials. Crystal data for Cu(hfacac)(2)(t-BuNH(2)): 293(2) K, a = 9.6699(4) A, b = 18.0831(10) A, c = 12.8864(11) A, beta = 111.839(5) degrees, monoclinic, space group P2(1)/c, Z = 4.     

Proton-induced cis-trans conversion of a platinum(II) center coordinated by L-cysteinatocobalt(III) metalloligands

Treatment of LambdaL-[Co(L-cys-N,S)(en)2]+ (l-H2cys = L-cysteine) with [PtCl4]2- in water, followed by the addition of acid, gave an S-bridged CoIII2PtII trinuclear complex ([1]4+), which was reversibly converted to its deprotonated complex ([2]2+) in an aqueous solution. While [1]4+ formed only a trans isomer, [2]2+ existed as a mixture of trans and cis isomers. The selective formation of a cis isomer was achieved by treatment of [1]4+ or [2]2+ with phthalic acid in water, which afforded a unique CoIII4PtII2 hexanuclear complex ([3]4+). Complex [3]4+ was reverted back to [1]4+ by treatment with aqueous HCl, accompanied by the complete cis-to-trans conversion.     

Switching of molecular insertion in a cyclic molecule via photo- and thermal isomerization

Two new cyclic ligands were synthesized: a ligand with two trans-azobenzene moieties and one bipyridine moiety, trans(2)-oAB-O13, and a ligand with two trans-azobenzene moieties and two bipyridine moieties, trans(2)-oAB-bpy. Both ligands underwent reversible trans-cis isomerization at the azobenzene moieties. The mole ratios of the trans(2) form:trans-cis form:cis(2) form, evaluated by (1)H NMR spectroscopy of the photostationary states prepared by 1 h illumination, were 0.13:0.27:0.60 (365 nm irradiation) and 0.41:0.47:0.12 (436 nm irradiation) for oAB-O13, and 0.18:0.12:0.70 (365 nm irradiation) and 0.36:0.43:0.21 (436 nm irradiation) for oAB-bpy. When trans(2)-oAB-O13 was mixed with Cu(I), both the bipyridine units and the polyether chains coordinated to the copper center. Addition of a noncyclic bipyridine ligand, trans(2)-oAB-2OH, afforded a bis(bipyridine)copper(I) complex, [Cu(trans(2)-oAB-O13)(trans(2)-oAB-2OH)]BF(4). The bis(bipyridine) ligand, trans(2)-oAB-bpy, formed a 1:1 complex with Cu(I), [Cu(trans(2)-oAB-bpy)]BF(4). [Cu(cis(2)-oAB-bpy)]BF(4) did not undergo the ligand substitution reaction with a noncyclic ligand with two azobenzene moieties and one bipyridine moiety, oAB, whereas its thermal isomerization in the presence of oAB caused the formation of [Cu(trans(2)-oAB-bpy)(trans(2)-oAB)]BF(4), indicating that the isomerization and ligand exchange reactions synchronized via a conformational change of the cyclic ligand.     

Mechanistic Intricacies of Gold‐Catalyzed Intermolecular Cycloadditions between Allenamides and Dienes

The mechanism of the gold‐catalyzed intermolecular cycloaddition between allenamides and 1,3‐dienes has been explored by means of a combined experimental and computational approach. The formation of the major [4+2] cycloaddition products can be explained by invoking different pathways, the preferred ones being determined by the nature of the diene (electron neutral vs. electron rich) and the type of the gold catalyst (AuCl vs. [IPrAu]⁺, IPr=1,3‐bis(2,6‐diisopropylphenyl)imidazole‐2‐ylidene). Therefore, in reactions catalyzed by AuCl, electron‐neutral dienes favor a concerted [4+3] cycloaddition followed by a ring contraction event, whereas electron‐rich dienes prefer a stepwise cationic pathway to give the same type of formal [4+2] products. On the other hand, the theoretical data suggest that by using a cationic gold catalyst, such as [IPrAuCl]/AgSbF₆, the mechanism involves a direct [4+2] cycloaddition between the diene and the gold‐activated allenamide. The theoretical data are also consistent with the observed regioselectivity as well as with the high selectivity towards the formation of the enamide products with a Z configuration. Finally, our data also explain the formation of the minor [2+2] products that are obtained in certain cases.     

Intramolecular [2 + 2] photocycloaddition of alkenes incorporated in a carbohydrate template. Synthesis of enantiopure bicyclo[3.2.0]heptanes and -[6.3.0]undecanes

Intramolecular [2 + 2] photocycloaddition of alkenes with a furano sugar placed between them have been investigated under both copper(I)-catalyzed and sensitized conditions. The copper(I)-catalyzed photocycloaddition of the dienes 4a, 4b, and 4c led to unexpected formation of the thermodynamically less stable cis-syn-cis 4-5-5 tricyclic adducts 5a, 5b, and 5c, respectively. The sensitized photocycloaddition of the diene 14 also gave the cis-syn-cis adduct 15 showing that the copper(I) catalyst does not have any influence on the stereochemical course through coordination with the anomeric ring oxygen of the furano sugar. The identical stereochemical course observed under both catalyzed and sensitized photoaddition reactions have been attributed to be of steric origin. Bis(dienes) 25a and 25b, which gave an intractable mixture on copper(I)-catalyzed irradiation, underwent smooth photocycloaddition in the presence of benzophenone, and the resulting 1,2-divinyl cyclobutanes underwent spontaneous [3.3]-rearrangement at room temperature to produce bicyclo[6.3.0]undecanes 30a and 30b, respectively. This investigation provides an approach for the construction of enantiopure bicyclo[3.2.0]heptanes and -[6.3.0]undecanes.     

Stereochemistry of the [4 + 2] cycloadditions of trans,trans- and cis,trans-2,4-hexadiene to C(60)

The [4 + 2] cycloaddition of trans,trans-2,4-hexadiene with C(60) proceeds via a concerted mechanism with retention of stereochemistry in the cycloadduct 1a. However, when cis,trans-2,4-hexadiene reacts with C(60), isomerization of the cis,trans to the thermodynamically more stable trans,trans isomer occurs. Subsequently, the cis,trans diene isomerized to the trans,trans isomer and cycloadds to C(60), to form adduct 1a. When the reaction is carried out at higher temperatures, the formation of cycloadduct 1b is also obtained. This result is consistent with a concerted cycloaddition of cis,trans-2,4-hexadiene with C(60), which is more reactive at elevated temperatures and leads to the formation of the Diels-Alder adduct 1b.     

New metal-organic frameworks with large cavities: selective sorption and desorption of solvent molecules

Five novel transition metal complexes [Cd(II) (3)(tpba-2)(2)(SCN)(6)].6 THF.3 H(2)O (1), [Cu(II) (3)(tpba-2)(2)(SCN)(6)].6 THF.3 H(2)O (2), [Ni(II) (3)(tpba-2)(2)(SCN)(6)].6 THF.3 H(2)O (3), [Cd(II) (2)(tpba-2)(SCN)(3)]ClO(4) (4), [Cu(I) (3)(SCN)(6)(H(3)tpba-2)] (5) [TPBA-2 = N',N',N'-tris(pyrid-2-ylmethyl)-1,3,5-benzenetricarboxamide, THF=tetrahydrofuran] were obtained by reactions of the corresponding transition metal salts with TPBA-2 ligand in the presence of NH(4)SCN using layering or solvothermal method, respectively. The results of X-ray crystallographic analysis showed that complexes 1, 2 and 3 are isostructural and have the same 2D honeycomb network structure with Kagomé lattice, in which all the M(II) (M = Cd, Cu, Ni) atoms are six-coordinated, and the TPBA-2 ligands adopt cis,cis,cis conformation while the thiocyanate anions act as terminal ligands. Capsule-like motifs are found in 1, 2 and 3, in which six THF molecules are hosted, and the results of XPRD and solid-state (13)C NMR spectral measurements showed that the compound 1 can selectively desorb and adsorb THF molecules occurring along with the re-establishment of its crystallinity. In contrast to 1, 2 and 3, complex 4 has different 2D network structure, resulting from TPBA-2 ligands with cis,trans,trans conformation, thiocyanate anions serving as end-to-end bridging ligands, and the incomplete replacement of perchlorate anions, which further link the 2D layers into 3D framework by the hydrogen bonds. In complex 5, the Cu(II) atoms are reduced to Cu(I) during the process of solvothermal reaction, and the Cu(I) atoms are connected by thiocyanate anions to form a 3D porous framework, in which the protonated TPBA-2 ligands are hosted in the cavities as templates.     

Au(CN)4]- as both an intramolecular and intermolecular bidentate ligand with [(tmeda)Cu(mu-OH)] dimers: from antiferro- to ferromagnetic coupling in polymorphs

Two polymorphic products, [[Cu(tmeda)(mu-OH)}2Au(CN)4][Au(CN)4] (1) and [Cu(tmeda)(mu-OH)Au(CN)4]2 (2), were synthesized from {Cu(tmeda)(mu-OH)}(2)X(2) (tmeda = N,N,N',N'-tetramethylethylenediamine, X = ClO4-, BF4-) and 2 equiv of K[Au(CN)4], and their X-ray structures were determined. Both compounds have [Cu(tmeda)(mu-OH)}2(2+) dimers with [Au(CN)4]- units bound in the axial positions. However, in 1, two trans N-donor cyanides of each [Au(CN)4]- unit bind to adjacent copper(II) dimers, forming a 1-D chain, whereas complex 2 is molecular, with two mono-coordinated [Au(CN)4]- units. The 1-D polymorph 1 is formed from aqueous solution, while the molecular polymorph 2 is obtained with X = BF4- in methanol. The polymorphs have slightly different Cu-O-Cu angles, a key magnetostructural parameter, such that the 1-D chain 1, with an angle of 96.6(2) degrees, shows ferromagnetic interactions with 2J = +57.5 cm(-1) and g = 2.097, whereas the molecular complex 2, with an angle of 98.92(17) degrees, shows antiferromagnetic interactions with 2J = -143.6 cm(-1) and g = 2.047. A similar Cu(II) complex, [[Cu(tmeda)(mu-OH)]2Au(CN)4][ClO4].MeOH (3), was synthesized in methanol when X = ClO4-, in which the [Au(CN)4]- unit bridges the two Cu(II) centers within the dimer in an intramolecular fashion via cis N-donor cyanides. The average Cu-O-Cu angle of 98.4(2) degrees in 3 generates antiferromagnetic interactions with 2J = -64.8 cm(-1) and g = 2.214. Complexes 1-3 represent the first examples of [Cu(tmeda)(mu-OH)]2(2+) dimers with Cu-O-Cu angles under 100 degrees, thereby extending the range of 2J coupling constants for this moiety from 149 to 566 cm(-1). The switch to ferromagnetic interactions in 1 as a result of the coordinating, bridging [Au(CN)4]- anion suggests that cationic, dinuclear moieties that are typically antiferromagnetically coupled may, with an appropriate coordinating counterion, become ferromagnetic units.     

Factors influencing the autoxidation of fatty acids: effect of olefin geometry of the nonconjugated diene

Autoxidations of cis,cis, cis,trans, and trans,trans nonconjugated octadecadienoates and pentadecadienes were carried out in the presence of alpha-tocopherol to investigate the effect of olefin geometry on this oxidation process and provide insight into the factors that influence the autoxidation of fatty acids. We have found that as the trans character of the diene increases, the amount of O(2) trapping at the central (bis-allylic) position of the pentadienyl radical also increases. In addition, the rate constant for beta-fragmentation (k(beta) approximately 10(6) s(-1)) of the bis-allylic peroxyl radical decreased on going from the cis,cis to the trans,trans diene. We have also found that for the cis,trans nonconjugated dienes, there is a preference for trapping of the pentadienyl radical by O(2) at the transoid end, generating the cis,trans conjugated hydroperoxide as the major product.     

EPR study on ligand-exchange reaction between bis(diethyldiselenocarbamato)copper(II) and some bis(acetylacetonato)copper(II) complexes

The paper is a study on the formation and properties of mixed-chelate copper(II) complexes, in which one ligand is strongly covalently bound diselenocarbamate (dsc), and the other belongs to a series of differently substituted acetylacetonates (acac), all forming weak covalent bonds. Thenoyltrifluoro- and trifluoro- substituted acetylacetonates only partly form mixed-chelate complexes, stable in toluene, benzene or dichloromethane, but gradually decomposing in chloroform or carbontetrachloride by analogy with Cu(Et(2)dsc)(2) behavior in these solvents. Hexafluoro-acetylacetonato copper(II) completely turns into a mixed-chelate Cu(dsc)(hfacac), which remains unchanged for more than 8 months of monitoring in all solvents used. The stability of Cu(dsc)(hfacac) is attributed to the reduced remaining negative charge on selenium atom embarrassing the formation of weak D-A complex with haloalkanes. The obtained EPR parameters suggest significant lowering of the contribution of the 4s AO of copper(II) in the mixed-chelate complexes. It is shown that Cu(acac)(2) does not react with Cu(Et(2)dsc)(2).     

Photoinitiated ambient temperature copper-catalyzed atom transfer radical addition (ATRA) and cyclization (ATRC) reactions in the presence of free-radical diazo initiator (AIBN)

The use of UV light in copper-catalyzed atom transfer radical addition (ATRA) and cyclization (ATRC) reactions of various (poly)halogenated compounds to highly active alkenes in the presence of AIBN is reported. Radicals generated from photodecomposition of AIBN efficiently regenerated the copper(I) complex at ambient temperature enabling ATRA of CCl(4) and CBr(4) with catalyst loadings as low as 0.05 mol-%. The desired monoadduct was obtained in lower yields in the ATRA of less active halogenated compounds, which was mostly due to incomplete alkene conversions. Ambient temperature ATRA of CCl(4) to various 1,6-dienes followed by sequential ATRC was also performed in the presence of UV light using [Cu(II)(TPMA)Cl][Cl] complex and AIBN. High yields of the 5-exo-trig cyclic product were obtained for all dienes with preferential formation of the cis isomer.     

Stepwise assembly of unsymmetrical supramolecular arrays containing porphyrins and coordination compounds

The stepwise coordination of meso-4'-pyridyl/phenyl porphyrins (4'-PyPs) to different metal centers proved to be an efficient synthetic approach leading to unsymmetrical arrays containing porphyrins and coordination compounds. The first step of this process, treatment of 4'-PyPs with a less than stoichiometric amount of cis,fac-RuCl2(Me2-SO)3(CO) (1), leads to the selective coordination of [cis,cis,cis-RuCl2(Me2SO)2(CO)] fragments ([Ru]) to some of the peripheral 4'-N sites of the 4'-PyPs. Column separation afforded four partially ruthenated 4'-PyPs in pure form: 4'-cis-DPyP[Ru] (2), 4'-trans-DPyP[Ru] (3), (4'-TPyP)[Ru] (4), and (4'-TPyP)[Ru]3 (5). These compounds, which have residual unbound peripheral 4'-N(py) sites (either one or three), were allowed to react with other metal centers that may belong either to a metalloporphyrin or to a coordination compound. When building blocks 2-5 were treated with [Ru(TPP)(CO)(EtOH)] (TPP = meso-tetraphenylporphyrin) in chloroform at room temperature, axial coordination of Ru(TPP)(CO) units ((Ru)) to the available 4'-N(py) sites readily occurred, generating the following arrays containing both perpendicular porphyrins and coordination compounds: (Ru)-(mu-4'-cis-DPyP)[Ru], (Ru)(mu-4'-trans-DPyP)[Ru], (Ru)3(mu-4'-TPyP)[Ru], and (Ru)(mu-4'-TPyP)[Ru]3. Furthermore, building blocks 2, 3, and 5 were treated with a series of coordination compounds capable of binding two pyridylporphyrins either cis to each other (trans-RuCl2(Me2SO)4 and trans,cis,cis-RuCl2(Me2SO)2(CO)2) or trans to each other (trans-PdCl2(C6H5CN)2). Homo- (Ru) and heterobimetallic (Ru-Pd) arrays with as many as seven metal atoms (six Ru and one Pd) and two 4'-PyPs were obtained as follows: trans,cis,cis-RuCl2(Me2SO)2(4'-cis-DPyP[Ru])2, trans,cis,cis-RuCl2(Me2SO)2(4'-trans-DPyP[Ru])2, trans,cis,cis-RuCl2(CO)2(4'-cis-DPyP[Ru])2, and trans-PdCl2(4'-TPyP[Ru]3)2. All the products were thoroughly characterized by 1H NMR spectroscopy. Since the [Ru] fragment is chiral, diastereomers are formed when two or more [Ru] units are bound to a porphyrin. We found that when two 4'-cis-DPyP[Ru] (2) units are coordinated cis to each other on the same metal center, the mutual anisotropic effect of the cis porphyrins differentiates the sulfoxide methyl resonances for the two forms. These and other results indicate that the pyridyl units react independently of the presence or absence of a substituent on the other py rings. Thus, the synthetic strategy should be a general method for linking diverse metal centers through pyridylporphyrins.     

Synthesis of acetimino complexes of Pt(II) and Pt(IV) and the first heteronuclear mu-acetimido complexes

The reactions of [Ag(NH=CMe2)2]ClO4 with cis-[PtCl2L2] in a 1:1 molar ratio give cis-[PtCl(NH=CMe2)(PPh3)2]ClO4 (1cis) or cis-[PtCl(NH=CMe2)2(dmso)]ClO4 (2), and in 2:1 molar ratio, they produce [Pt(NH=CMe2)2L2](ClO4)2 [L = PPh3 (3), L2= tbbpy = 4,4'-di-tert-butyl-2,2'-dipyridyl (4)]. Complex 2 reacts with PPh3 (1:2) to give trans-[PtCl(NH=CMe2)(PPh3)2]ClO(4) (1trans). The two-step reaction of cis-[PtCl2(dmso)2], [Au(NH=CMe2)(PPh3)]ClO4, and PPh3 (1:1:1) gives [SP-4-3]-[PtCl(NH=CMe2)(dmso)(PPh3)]ClO4 (5). The reactions of complexes 2 and 4 with PhICl2 give the Pt(IV) derivatives [OC-6-13]-[PtCl3(NH=CMe2)(2)(dmso)]ClO4 (6) and [OC-6-13]-[PtCl2(NH=CMe2)2(dtbbpy)](ClO4)2 (7), respectively. Complexes 1cis and 1trans react with NaH and [AuCl(PPh3)] (1:10:1.2) to give cis- and trans-[PtCl{mu-N(AuPPh3)=CMe2}(PPh3)2]ClO4 (8cis and 8trans), respectively. The crystal structures of 4.0.5Et2O.0.5Me2CO and 6 have been determined; both exhibit pseudosymmetry.     

Conversion of [Pt(SRf)2(PPh2 -n(C6F5)n+ 1)2]( n = 0 or 1, Rf=C6HF4-4) through carbon-fluorine bond activation to [Pt(SRf)2(1,2-C6F4(SRf)-(PPh2))] and chiral [Pt(SRf)2(1,2-C6F4(SRf)(PPh(C6F5)))

Treatment of trans-[PtCl(2)(PPh(2 - n)(C(6)F(5))(n + 1))(2)](n = 0 or 1) with Pb(SC(6)HF(4)-4)(2) yields a mixture of monometallic cis/trans [Pt(SC(6)HF(4)-4)(2)(PPh(2 - n)(C(6)F(5))(n + 1))(2)], thiolate-bridged bimetallic cis/trans [Pt(2)(mu-SC(6)HF(4)-4)(2)(SC(6)HF(4)-4)(2)(PPh(2 - n)(C(6)F(5))(n + 1))(2)] and [Pt(SC(6)HF(4)-4)(2)(1,2-C(6)F(4)(SC(6)HF(4)-4)(PPh(2 - n)(C(6)F(5))(n))].     

Diastereocontrolled synthesis of trans- and cis-meso-cyclopentene aziridines

[reaction: see text] The synthesis of novel substituted meso-aziridines is described: aziridination of 4-tert-butyldiphenylsilyloxy-cyclopent-1-ene is trans selective using Cu(I)/PhI=NSO(2)Ar and cis selective using PhNMe(3)(+)Br(3)(-)/Chloramine-T.     

Guanine-containing copper(II) complexes: synthesis, X-ray structures and magnetic properties

Three new compounds of formula {[Cu(gua)(H(2)O)(3)](BF(4))(SiF(6))(1/2)}(n) (1), {[Cu(gua)(H(2)O)(3)](CF(3)SO(3))(2).H(2)O}(n) (2) and [Cu(gua)(2)(H(2)O)(HCOO)]ClO(4).H(2)O.1/2HCOOH] (3) [gua = 2-amino-1H-purin-6(9H)-one] showing the unprecedented coordination of neutral guanine, have been synthesised and structurally characterized. The structures of the compounds 1 and 2 contain uniform copper(II) chains of formula [Cu(gua)(H(2)O)(3)](n)(2n+), where the copper atoms are bridged by guanine ligands coordinated via N(3) and N(7). The electroneutrality is achieved by uncoordinated tetrafluoroborate and hexafluorosilicate (1) and triflate (2). Each copper atom in 1 and 2 is five-coordinated in a distorted square pyramidal environment: two water molecules in trans positions and the N(3) and N(7a) nitrogen atoms of two guanine ligands build the basal plane whereas a water molecule fills the axial position. The values of the copper-copper separation across the bridging guanine ligand are 7.183(1) (1) and 7.123(1) A (2). is an ionic salt whose structure is made up of mononuclear [Cu(gua)(2)(H(2)O)(HCOO)](+) cations and perchlorate anions plus water and formic acid as crystallization molecules. The two guanine ligands in the cation are coordinated to the copper centre through the N(9) atom. The copper atom in 3 is four-coordinated with two monodentate guanine molecules in the trans position, a water molecule and a monodenate formate ligand building a quasi square planar surrounding. Magnetic susceptibility measurements for 1 and 2 in the temperature range 1.9-300 K show the occurrence of significant intrachain antiferromagnetic interactions between the copper(ii) ions across the guanine bridge [J = -9.6(1) (1) and -10.3(1) cm(-1) (2) with H = -J summation operator(i)S(i).S(i+1)].     

Synthesis, crystal structures and magnetic properties of single and double cyanide-bridged bimetallic Fe2(III)Cu(II) zigzag chains

The bimetallic complexes [[Fe(III)(phen)(CN)4]2Cu(II)(H2O)2].4H2O (1), [[Fe(III)(phen)(CN)4]2Cu(II)].H2O (2) and [[Fe(III)(bipy)(CN)4]2Cu(II)].2H2O (3) and [[Fe(III)(bipy)(CN)4]2Cu(II)(H2O)2].4H2O (4) (phen = 1,10-phenanthroline and bipy = 2,2'-bipyridine) have been prepared and the structures of 1-3 determined by X-ray diffraction. The structure of 1 is made up of neutral cyanide-bridged Fe(III)-Cu(II) zigzag chains of formula [[Fe(III)(phen)(CN)4]2Cu(II)(H2O)2] and uncoordinated water molecules with the [Fe(phen)(CN)4]- entity acting as a bis-monodentate bridging ligand toward two trans-diaquacopper(II) units through two of its four cyanide groups in cis positions. The structure of 2 can be viewed as the condensation of two chains of 1 connected through single cyanide-bridged Fe(III)-Cu(II) pairs after removal of the two axially coordinated water molecules of the copper atom. The structure of 3 is like that of 2, the main differences being the occurrence of bipy (phen in 2) and two (one in 2) crystallization water molecules. The crystals of 4 diffract poorly but the analysis of the limited set of diffraction data shows a chain structure like that of 1 the most important difference being the fact that elongation axis at the copper atom is defined by the two trans coordinated water molecules. 1 behaves as a ferromagnetic Fe(III)2Cu(II) trinuclear system. A metamagnetic-like behavior is observed for 2 and 3, the value of the critical field (Hc) being ca. 1100 (2) and 900 Oe (3). For H > Hc the ferromagnetic Fe(III)2Cu(II) chains exhibit frequency dependence of the out-of-phase ac susceptibility signal at T < 4.0 K. The magnetic behavior of 4 corresponds to that of a ferromagnetically coupled chain of low spin iron(III) and copper(II) ions with frequency dependence of the out-of-phase susceptibility at T < 3.0 K. Theoretical calculations using methods based on density functional theory (DFT) have been employed to analyze and substantiate the exchange pathways in this family of complexes.     

A mixed-ligand coordination polymer from the in situ,Cu(I)-mediated isomerization of bis(4-pyridyl)ethylene

Reaction of [Cu(PPh(3))(2)(MeCN)(2)]PF(6) and trans-1,2-bis(4-pyridyl)ethylene (bpe) results in the trans-cis isomerization of the bpe and subsequent formation of a mixed-isomer linear coordination polymer over the course of several days or weeks depending on solvent. The one unique copper atom in the structure is coordinated to two bridging cis-bpe ligands, one bridging trans-bpe ligand, and one terminal triphenylphoshine ligand to create [Cu(trans-bpe)(0.5)(cis-bpe)(PPh(3))](+)( infinity ) zigzag chains. The reaction requires both visible light and Cu(I), and the crystallization of this particular coordination polymer is insensitive to the ratio of trans:cis isomers in solution, occurring both from trans-rich and cis-rich solutions.     

Synthesis, characterization, and reactivity of ruthenium diene/diamine complexes including catalytic hydrogenation of ketones

Thermal reactions between [RuCl2(diene)]n (diene = 2,5-norbornadiene, nbd; 1,5-cyclooctadiene, cod) with an excess of N,N,N',N'-tetramethylethylene diamine (tmeda) afforded derivatives [RuCl2(diene)(tmeda)] (diene = nbd, 1; cod, 2) as a mixture of cis and trans isomers. When thermolysis was performed under H2 mixtures of hydride species [RuCl(H)(diene)(tmeda)] (diene = nbd, 3; cod, 4) and the bis-tmeda adduct trans-[RuCl2(tmeda)2] (5) were obtained in different ratios depending upon the reaction conditions and reaction times. Heating polymeric Ru(II) precursors in toluene in the presence of a 5-fold excess of the bulkier N,N,N',N'-tetraethylethylene diamine (teeda) resulted in a rare diamine dealkylation process with formation of trans-[RuCl2(nbd)(Et2NCH2CH2NHEt)] (6) and trans-[RuCl2(cod)(EtHNCH2CH2NHEt)] (7) in high yields. The presence of N-H functionalities in the coordinated diamine ligands of 6 and 7 was unambiguously established by single-crystal X-ray diffraction studies. The dealkylation process of the teeda ligand seems to proceed intramolecularly as shown by solution NMR studies performed with the soluble Ru(II) precursors trans-[RuCl2(amine)2(diene)] (diene = nbd, amine = morpholine, 9; diene = cod, amine = Et2NH, 10). The above complexes [RuCl2(diene)(diamine)] have been tested as precatalysts in the hydrogenation of ketones both for transfer as well as direct hydrogenation, the latter route being the most effective.     

A series of lanthanide-transition metal frameworks based on 1-, 2-, and 3D metal-organic motifs linked by different 1D copper(I) halide motifs

Hydrothermal reactions of lanthanide(III) oxide and copper halide with isonicotinic acid (Hina) and pyridine-2,3-dicarboxylic acid (H2pdc) or 1,2-benzenedicarboxylic acid (H2bdc) lead to three novel lanthanide(III)-copper(I) heterometallic compounds, namely, [Ce2(ina)5(na)2(H2O)2][Cu5Br4] (1, na=nicotinic acid), [Er4(ina)8(bdc)2(OH)(H2O)5][Cu8I7] (2), and [Ce3(ina)8(bdc)(H2O)4][Cu7Br6] (3). Compound 1 is constructed from two distinct units of the Ln-organic double chains and inorganic [Cu5Br4]nn+ chains. Compound 2 consists of 2D Ln-organic layers and 1D [Cu8I7]nn+ cluster chains. Compound 3 can be viewed as a 1D [Cu6Br6]n chainlike motif inserted into the channels of a 3D Ln-Cu-organic motif. Compounds 1-3 exhibit three different 1D inorganic copper(I)-halide chains interconnected with metal-organic 1D chains, 2D layers, and 3D nets resulting in three mixed-motif non-interpenetrating heterometallic Cu-halide-lanthanide (Ln)-organic frameworks, which represent good examples and a facile method to construct such mixed-motif heterometallic compounds. Furthermore, the IR, TGA, and UV-vis spectra of 1-3 were also studied.