In Situ Synthesis of Imidazolium‐Crosslinked Ionogels via Debus–Radziszewski Reaction Based on PAMAM Dendrimers in Imidazolium Ionic liquid

This study reports a remarkably facile method to synthesize novel ionogels with imidazolium cycle crosslinks based on polyamidoamine (PAMAM) dendrimers via one‐pot, modified Debus–Radziszewski reaction in ionic liquid 1‐ethyl‐3‐methylimidazolium acetate ([EMIM][OAc]). High room temperature ionic conductivity (up to 6.8 mS cm⁻¹) is achieved, and more remarkably, it can still exceed 1 mS cm⁻¹ when the dendrimer content reached 70% because PAMAM dendrimers are completely amorphous with many cavities and the newly formed imidazolium crosslinks contains ions. The elastic modulus of these ionogels can exceed 10⁶ Pa due to the newly‐formed rigid imidazolium crosslinks. Crucially, these ionogels are robust gels even at temperatures up to 160 °C. Such novel ionogels with high ionic conductivity, tunable modulus, and flexibility are desirable for use in high‐temperature flexible electrochemical devices.     

Effect of anions on static orientational correlations, hydrogen bonds, and dynamics in ionic liquids: a simulational study

Three different ionic liquids are investigated via atomistic molecular dynamics simulations using the force field of Lopes and PAdua (J. Phys. Chem. B 2006, 110, 19586). In particular, the 1-ethyl-3-methylimidazolium cation EMIM+ is studied in the presence of three different anions, namely, chloride Cl-, tetrafluoroborate BF(4)(-), and bis((trifluoromethyl)sulfonyly)imide TF2N-. In the focus of the present study are the static distributions of anions and cations around a cation as a function of anion size. It is found that the preferred positions of the anions change from being close to the imidazolium hydrogens to being above and below the imidazolium rings. Lifetimes of hydrogen bonds are calculated and found to be of the same order of magnitude as those of pure liquid water and of some small primary alcohols. Three kinds of short-range cation-cation orderings are studied, among which the offset stacking dominates in all of the investigated ionic liquids. The offset stacking becomes weaker from [EMIM][Cl] to [EMIM][BF4] to [EMIM][TF2N]. Further investigation of the dynamical behavior reveals that cations in [EMIM][TF2N] have a slower tumbling motion compared with those in [EMIM][Cl] and [EMIM][BF4] and that pure diffusive behavior can be observed after 1.5 ns for all three systems at temperatures 90 K above the corresponding melting temperatures.     

离子液体[EMIM][PF6]负载纳米SiOx表面的熔点及结构

制备了离子液体(1-乙基-3-甲基咪唑六氟磷酸 [EMIM][PF₆])负载量不同的多孔纳米氧化硅(SiO_x), 并采用差式扫描量热分析(DSC)、X射线衍射(XRD)、激光Raman光谱、傅里叶变换红外(FTIR)光谱分析等手段研究离子液体负载纳米氧化硅后的熔点变化及相行为. 研究表明负载于纳米氧化硅表面的离子液体熔点明显下降, 且负载于不同表面羟基含量的氧化硅表面熔点下降幅度不同. 纯离子液体[EMIM][PF₆]熔点为62 ℃, 在纳米氧化硅表面负载量为35%时熔点为52 ℃, 比负载前下降10 ℃; 负载于另两种不同羟基含量的纳米氧化硅表面后熔点分别下降20和17 ℃. 而同一种纳米氧化硅(比表面积为640 m²·g^-1)在负载量小于50%时, 熔点下降明显; 进一步增大负载量, 熔点逐渐趋于本体. XRD和Raman光谱分析显示, 离子液体负载于氧化硅表面后其衍射峰或吸收峰相对强度发生明显改变. 分析负载前后纳米氧化硅的结构变化, 推断离子液体熔点下降的主要原因是离子液体分子与纳米氧化硅表面之间存在强烈的界面相互作用, 而表面羟基的密度及比表面积是影响负载后[EMIM][PF₆]离子液体相行为的主要因素.     

Enhancing the Thermal Stability of Ionogels: Synthesis and Properties of Triple Ionic Liquid/Halloysite/MCC Ionogels

In this study, an ionic liquid (IL), 1-butyl-3-methylimidazolium acetate, was used to prepare ionogels with microcrystalline cellulose (MCC) and halloysite (Hal). SEM, XRD, TG, DSC, FTIR spectroscopy, conductometry and mechanical tests were used to study the morphology, structure, thermal behaviour and electrophysical and mechanical characteristics of synthesised ionogels. XRD analysis showed a slight decrease in the interlayer space of halloysite in ionogels containing MCC, which may have been associated with the removal of residual water molecules resulting from hydrophilic IL anions and polymer macromolecules. A change in conductivity and glass-transition temperature of the ionic liquid was revealed due to intercalation into halloysite (a confinement effect) and modification with cellulose. For triple IL/Hal/MCC ionogels, the characteristic thermal degradation temperatures were higher than the corresponding values for IL/Hal composites. This indicates that the synthesised IL/Hal/MCC ionogels are characterised by a greater thermal stability than those of IL/Hal systems.     

The performance of 1‐ethyl‐3‐methylimidazolium tetrafluoroborate ionic liquid as mobile phase additive in HPLC‐based lipophilicity assessment

Ionic liquids have been widely used as green alternative mobile phase additives to shield the residuals silanols groups and modify the stationary/mobile phase HPLC systems. The present study aimed to evaluate the performance of the ionic liquid 1‐ethyl‐3‐methylimidazolium tetrafluoroborate ([EMIM][BF4]) in producing extrapolated logk_w indices suitable to substitute for octanol–water logP or logD values. The effect of [EMIM][BF4] was investigated for a set of basic and neutral drugs using two different columns, BDS and ABZ⁺. [EMIM][BF4] was added simply alone or in combination with n‐octanol and was compared with the conventional masking agent n‐decylamine. [EMIM][BF4] reduced the retention by suppressing silanophilic interactions, althoug to a lower extent than n‐decylamine. Addition of n‐octanol further decreased the retention by shielding silanol sites on BDS and/or interacting with polar groups through hydrogen bonding on ABZ⁺. Logk_w/logD_7.4 relationships proved moderate compared with those derived upon addition of n‐decylamine. They were considerably improved upon the introduction of protonated fraction F⁺ in the correlation, reflecting ion pair formation between the chaotropic anion [BF4]^‐ and the protonated basic compounds. In this aspect, the ionic liquid [EMIM][BF4], although efficient as a masking agent, cannot be recommended as mobile phase additive to reproduce octanol–water partitioning. Copyright © 2010 John Wiley & Sons, Ltd.     

Investigation of confined ionic liquid in nanostructured materials by a combination of SANS, contrast-matching SANS, and nitrogen adsorption

Small-angle neutron scattering (SANS), contrast-matching SANS, and nitrogen adsorption have been utilized to investigate the confined ionic liquid (IL) [bmim][PF(6)] phase in ordered mesoporous silica MCM-41 and SBA-15. The results suggest that the pores of SBA-15 are completely filled with IL whereas a small fraction of the pore volume, the pore "core", of MCM-41 is empty. The contrast-matching SANS measurements confirm the enhanced solubility of water in IL. In addition, they provide strong evidence that water does not enter the empty pore core of MCM-41, possibly because of the preferred orientation of the IL molecules in the adsorbed layer.     

Synthesis and characterization of ionic liquids incorporating the nitrile functionality

A series of imidazolium salts with the nitrile functional group attached to the alkyl side chain, viz. [CnCNmim][X] (where CnCNmim is the 1-alkylnitrile-3-methylimidazolium cation and Cn= (CH2)(n), n = 1-4; X = Cl, PF(6), and BF(4)) and [C3CNdmim][X] (where CnCNdmim is the 1-alkylnitrile-2,3-dimethylimidazolium cation and C(n) = (CH2)(n), n = 3; X = Cl, PF(6), and BF(4)), have been prepared and characterized using spectroscopic methods. The majority of the nitrile-functionalized imidazolium salts can be classed as ionic liquids since they melt below 100 degrees C. Four of the imidazolium salts have been characterized in the solid state using single-crystal X-ray diffraction analysis to reveal an extensive series of hydrogen bonds between H atoms on the cation and the anion. The relationship between the solid-state structure and the melting point is discussed. Key physical properties (density, viscosity, and solubility in common solvents) of the low melting ionic liquid have been determined and are compared with those of the related 1-alkyl-3-methylimidazolium and 1-alkyl-2,3-dimethylimidazolium ionic liquids. It was envisaged that these ionic liquids could act as both solvent and ligand for catalyzed reactions, and this application is demonstrated in hydrogenation reactions, which show that retention of the catalyst in the ionic liquid during product extraction is extremely high.     

Spontaneous phase transfer of thermosensitive hairy particles between water and an ionic liquid

This article describes the temperature-induced phase transfer behavior of a series of thermosensitive polymer brush-grafted particles between water and a hydrophobic ionic liquid, 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([EMIM][TFSI]). Six samples were made by surface-initiated atom transfer radical polymerization: silica particles grafted with poly(methoxypoly(ethylene glycol) methacrylate) (PPEGMMA) with two different molecular weights, poly(methoxytri(ethylene glycol) methacrylate) (PTEGMMA), poly(methoxydi(ethylene glycol) methacrylate) (PDEGMMA), and two copolymers of PEGMMA and TEGMMA with different compositions (P(PEGMMA-co-TEGMMA)-82 and P(PEGMMA-co-TEGMMA)-74). The cloud points of free PPEGMMA with M(n,SEC) of 23 and 40 kDa, P(PEGMMA-co-TEGMMA)-82, P(PEGMMA-co-TEGMMA)-74, and PTEGMMA in [EMIM][TFSI]-saturated water were 95, 94, 80, 72, and 43 °C, respectively. PDEGMMA was not soluble in the ionic liquid-saturated water. PPEGMMA brush-grafted particles moved spontaneously and completely from water to the [EMIM][TFSI] phase upon heating at 80 °C. When cooled to 22 °C, all particles returned to the water layer. From UV-vis absorbance measurements, the transfer temperature (T(tr)) of PPEGMMA-grafted particles from water to the ionic liquid was 42 °C. Thermodynamic analysis showed that the particle transfer was an entropically driven process. P(PEGMMA-co-TEGMMA)-82, P(PEGMMA-co-TEGMMA)-74, and PTEGMMA brush-grafted particles also underwent reversible and quantitative transfer between the two phases upon heating at 70 °C and cooling at 0 °C; their transfer temperatures from water to [EMIM][TFSI] were 36, 30, and 16 °C, respectively. T(tr) was a linear function of the cloud point of the corresponding free polymer in ionic liquid-saturated water. In contrast, PDEGMMA-grafted particles moved spontaneously to the ionic liquid layer upon heating but did not return to water even after prolonged stirring at 0 °C.     

Vapor pressure measurement for water,methanol, ethanol,and their binary mixtures in the presence of an ionic liquid 1-ethyl-3-methylimidazolium dimethylphosphate

Vapor pressure data were measured for water, methanol and ethanol as well as their binary mixtures with an ionic liquid (IL) 1-ethyl-3-methylimidazolium dimethylphosphate ([EMIM][DMP]) at varying temperature and IL-content ranging from mass fraction of 0.10–0.70 by a quasi-static method. The vapor pressure data for the IL-containing binary systems were correlated using NRTL equation with average absolute relative deviation (ARD) within 0.0076, and the binary NRTL parameters was used for predicting the vapor pressure of the IL-containing ternary systems with reasonable accuracy. In addition, the infinite activity coefficients of solvents in [EMIM][DMP] and isobaric vapor–liquid equilibrium for IL-containing ternary systems at 101.325 kPa and mass fraction of IL being 0.5 were predicted with the regressed NRTL parameters. The results indicate that ionic liquid [EMIM][DMP] can depress the volatility of the solvents of water, methanol and ethanol but to a varying degree, leading to the variation of relative volatility of a solvent and even removal of azeotrope for water–ethanol mixture.     

Quantitative Analysis of Alpha‐D‐glucose in an Ionic Liquid by Using Infrared Spectroscopy

The applicability of infrared (IR) spectroscopy for quantitative concentration measurements in mixtures of carbohydrates and ionic liquids (ILs) is investigated. The compound 1‐ethyl‐3‐methylimidazolium acetate, [EMIM][OAc]—an “enzyme‐friendly” ionic liquid with great application potential in the dissolution of various biomasses—is used as solvent in combination with alpha‐D ‐glucose. Our study establishes a new way to monitor the concentration of sugars in ILs, thus providing a convenient method to follow the kinetics of, for example, enzymatic reactions in [EMIM][OAc]. As a first step, we present the IR spectrum of pure [EMIM][OAc] (this constitutes the first vibrational study of this particular IL). Although numerous lines overlap in the fingerprint region of the spectrum, characteristic features can be assigned to the corresponding vibrational modes of both ions. Secondly, we study different mixtures of the IL with alpha‐D ‐glucose (in the concentration range: 0–20 mass % glucose) and analyze them by means of IR spectroscopy, followed by computational methods, thus demonstrating the great potential of this spectroscopic technique in quantitative measurements.     

Structural change of 1-butyl-3-methylimidazolium tetrafluoroborate + water mixtures studied by infrared vibrational spectroscopy

Mixtures of ionic liquid (IL, 1-butyl-3-methylimidazolium tetrafluoroborate, [BMIM][BF4]) and water with varying concentrations were studied by attenuated total reflection infrared absorption and Raman spectroscopy. Changes in the peak intensities and peak positions of CHx (x = 1, 2, 3) vibration modes of the cation of the IL and OH vibration modes of the water molecules were investigated. Peaks from normal-mode stretch vibrations of CH bonds belonging to the imidazolium ring of the cation did not change their positions, while those from the terminal methyl group of the butyl chain blueshifted by approximately 10 cm-1 with the addition of water. On the other hand, change in the spectral shape in the OH stretch vibration region shows hydrogen-bonding network of water molecules breaking down rapidly as the IL is added. Trends in the change of the peak positions and the peak intensities suggested qualitative change of the intermolecular structure in the [BMIM][BF4] + H2O mixture at 32 +/- 2 and 45 +/- 2 mol/L of water concentration.     

Evidence for spin diffusion in a H,H-NOESY study of imidazolium tetrafluoroborate ionic liquids

The ionic liquids 1-ethyl-3-methylimidazolium tetrafluoroborate ([EMIM][BF4]) and 1-methyl-3-propylimidazolium tetrafluoroborate ([PMIM][BF4]) were studied by H,H-NOESY NMR using a cross-relaxation matrix analysis. Cross-peak intensities are seen to increase with increasing mixing time. Experimental and theoretical hydrogen-hydrogen distances are in agreement at short mixing times (50 ms). Mixing times longer than 50 ms result in an increasing contribution of spin diffusion that produces unrealistically short hydrogen-hydrogen distances. Gas-phase ab initio molecular structures are obtained using Hartree-Fock (HF) and density functional theory (B3LYP) methods at the 6311 + G(2d,p) basis set level. The hydrogen-hydrogen distances obtained from the theoretical structures are in reasonable agreement with those calculated from the cross-relaxation matrices.     

Enhanced refolding of lysozyme with imidazolium-based room temperature ionic liquids: Effect of hydrophobicity and sulfur residue

The expression of recombinant proteins in microorganism frequently leads to the formation of insoluble aggregates, inclusion bodies (IBs). Thus, the additional in vitro protein refolding process is required to convert inactive IBs into water-soluble active proteins. This study investigated the effect of sulfur residue and hydrophobicity of imidazolium-based room temperature ionic liquids (RTILs) on the refolding of lysozyme as a model protein in the batch dilution method which is the most commonly used refolding method. When lysozyme was refolded in the refolding buffer containing [BF4]-based RTILs with a systematic variety of alkyl chain on cations varying from two to eight, less hydrophobic imidazolium cations having shorter alkyl chains were effective to facilitate lysozyme refolding. Compared to the conventional refolding buffer, 2 times higher lysozyme refolding yield was obtained in 1-ethyl-3-methylimidazolium tetrafluoroborate ([EMIM][BF4]) containing refolding buffer. The refolding yield of lysozyme was even more increased by 2.5 times when 1-butyl-3-methylimidazolium methylsulfate ([BMIM][MS]) containing sulfur residue on anion was used. The sulfur residue in [BMIM][MS] is supposed to improve the refolding yield of lysozyme which has 4 intramolecular disulfide bonds. For dilution-based refolding of lysozyme, the optimum concentrations of RTILs in refolding buffer were found to be 1.0 M [EMIM][BF4] and 0.5 M [BMIM][MS], respectively. The optimum temperate for dilution-based refolding of lysozyme with RTILs was 4 °C.     

离子液体电解质种类对活性炭电极超级电容器电化学性能的影响

本文将经水蒸气二次活化的椰壳活性炭（W-AC）作为电极材料,选择1-乙基-3甲基咪唑四氟硼酸盐（[EMIM]BF₄）作为电解质,结果表明W-AC电极的比电容量远高于未活化的椰壳活性炭（R-AC）.使用循环伏安、恒电流充放电、交流阻抗等方法研究了不同种类离子液体电解质对超级电容器电化学性能的影响.不同阴阳离子组成的离子液体作为电解质,直接影响超级电容器的电化学性能. 研究表明,由EMIM⁺和BMIM⁺阳离子与BF₄^-、TFSI^-阴离子构成的离子液体电解质较适用于W-AC电极. 其中在[EMIM]BF₄电解质中,单片电极的比电容量可高达153 F·g^-1;在1-丁基-3-甲基-咪唑四氟硼酸盐（[BMIM]BF₄）电解质中电位窗可达3.5V,能量密度可高达57 Wh·kg^-1.本研究对于构筑高性能超级电容器离子液体的选择提供参考,以满足不同应用领域需求.     

Morphology of poly(ethylene oxide) dissolved in a room temperature ionic liquid: a small angle neutron scattering study

Solutions of deuterated poly(ethylene oxide) (d-PEO) in 1-butyl-3-methyl imidazolium tetrafluoroborate ([bmim][BF4]), a prototype room-temperature ionic liquid (RTIL), have been studied at room temperature over a range of polymer concentrations, using small angle neutron scattering (SANS), characterizing the conformation of PEO dissolved in RTILs. [bmim][BF4] behaves as a good solvent for d-PEO, which organizes in this solvent in non entangled random coils. These findings will help in optimizing the designing of microemulsions in these potentially environmentally friendly solvents.     

Structures of ionic liquids with different anions studied by infrared vibration spectroscopy

We investigated the structures of ionic liquids (1-butyl-3-methylimidazolium iodide [BMIM][I] and 1-butyl-3-methylimidazolium tetrafluoroborate [BMIM][BF4]) and their aqueous mixtures using attenuated total reflection (ATR) infrared absorption and Raman spectroscopy. The ATR spectrum in the CHx (x = 1, 2, 3) vibration region from 2800 to 3200 cm-1 was very different between [BMIM][BF4] and [BMIM][I] even though all the spectral features in this region were from the butyl chain and the imidazolium ring of the same cation. The spectrum did not change appreciably irrespective of the water concentration for [BMIM][BF4], whereas the spectrum from [BMIM][I] showed significant changes as the water concentration was increased, especially in CH-vibration modes from the imidazolium ring. For very diluted solutions both aqueous mixtures of [BMIM][I] and [BMIM][BF4] showed very similar spectra. Mixing of [BMIM][I] with heavy water (D2O) facilitated the isotopic exchange of the proton attached to the most acidic carbon of the imidazolium ring into deuterium from D2O, whereas even prolonged exposure to D2O did not induce any isotopic exchange for [BMIM][BF4]. Raman spectra around 600 cm(-1) indicative of the butyl chain conformation also changed differently as the water concentration was increased between [BMIM][I] and [BMIM][BF4]. These differences are considered to come from the variation in the position of the anion, where I- is expected to be closer to the C(2) hydrogen of the imidazolium cation and interacting more specifically as compared to BF(4-).     

The thermochemistry of solvation of imidazolium-based ionic liquids in benzene

ABSTRACT

The present work is devoted to the thermochemical study of solvation of ionic liquids (IL) in benzene. The solution enthalpies of 1-ethyl-3-methylimidazolium tricyanomethanide [EMIM][C(CN)₃], 1-butyl-3-methylimidazolium tetrafluoroborate [BMIM][BF₄], 1-hexyl-3-methylimidazolium hexafluorophosphate [HMIM][PF₆], 1-octyl-3-methylimidazolium tetrafluoroborate [OMIM][BF₄], 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [EMIM][NTf₂], 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [BMIM][NTf₂] and 1-butyl-3-methylimidazolium trifluoromethanesulfonate [BMIM][TfO] in benzene were measured. The solvation enthalpies of imidazolium-based IL were calculated. Molar refractions of imidazolium-based IL form literature data on density and refractive indexes of IL were also calculated. The linear correlation between solvation enthalpy and molar refraction of IL was observed. This correlation can be used to calculate the vaporization enthalpy of imidazolium-based IL from solution calorimetry data.     

Liquid–Liquid Equilibrium Data for 1-Ethyl-3-methylimidazolium Acetate–Thiophene–Diesel Compound: Experiments and Correlations

Extraction of thiophene from cyclohexane, isooctane and toluene were performed using the ionic liquid 1-ethyl-3-methylimidazolium acetate ([EMIM][OAc]) at T=298.15 K. The liquid?Cliquid equilibrium (LLE) experiments were performed on three systems, namely: [EMIM][OAc]?Cthiophene?Ccyclohexane, [EMIM][OAc]?Cthiophene?Cisooctane and [EMIM][OAc]?Cthiophene?Ctoluene. The LLE data showed that [EMIM][OAc] has a higher selectivity at low concentration of thiophene and also showed that the hydrocarbon-rich phase is free of ionic liquid. This implies that there will be no cross contamination and the ionic liquid will be a non-pollutant in fuel after extraction. Further, the amount of hydrocarbon in the ionic-liquid-rich phase is very small. This implies that ionic liquid can be regenerated with negligible loss of fuel. LLE data was then correlated using the NRTL and UNIQUAC models. These showed root mean square deviation (RMSD) values of 0.82?% and 1.46?% for the isooctane system, 1.37?% and 1.57?% for the cyclohexane system and 1.39?% and 1.53?% for the toluene system.     

Concentration-dependent dual behavior of hydrophilic ionic liquid in changing properties of aqueous sodium dodecyl sulfate

Modifying physicochemical properties of aqueous surfactant solutions in favorable fashion by addition of environmentally benign room-temperature ionic liquids (ILs) has enormous future potential. Due to its unusual properties, an IL may demonstrate a unique role in altering the properties of aqueous surfactant solutions. Changes in the properties of aqueous sodium dodecyl sulfate (SDS), an anionic surfactant, upon addition of a common and popular "hydrophilic" ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate [bmim][BF4] are presented. Addition of low concentrations of [bmim][BF4] (i.e., 相似文献   

A novel method to prepare polymer-ionic liquid gel under high pressure and its electrochemical properties

Sol–gel transition behavior of ionic liquid gel based on poly (ethylene glycol) (PEG) and ionic liquid 1-ethyl-3-methylimidazolium ethylsulfate [EMIM][EtSO₄] has been investigated under the pressure up to 250 MPa. The Temperature versus Pressure phase diagram of PEG/[EMIM][EtSO₄] gel is constructed, and it indicates that the melting point is an increasing function of pressure. Based on the phase diagram, the PEG/[EMIM][EtSO₄] gels are prepared by cooling under the pressure of 300 MPa and atmospheric pressure, respectively. From the differential scanning calorimetry result of the recovered samples, it is found that PEG/[EMIM][EtSO₄] gel prepared under high pressure has a higher crystallinity and smaller crystal size polymer network, comparing with under atmospheric pressure. The cyclic voltammograms and impedance spectra tests indicate that the PEG/[EMIM][EtSO₄] gel prepared under high pressure exhibit higher ionic conductivity comparing with atmospheric pressure. It could be speculated these excellent properties might be attributed to the loose gel structure and high ionic density induced by high pressure.