新型蒽类聚方酸菁的合成及其性能

以蒽为起始原料,经溴代反应和Witting-Horner反应制得单体9,10-双[2-(1-辛基-1H-吡咯-2-基)乙烯基]蒽(3);3与芳酸缩聚合成了一个新型的蒽类聚方酸菁(4),其结构和性能经UV-Vis,1HNMR,13CNMR,IR,XRD,SEM和TG表征。4在氯仿中的λmax位于700nm;4为非晶态结构;4的初始分解温度为297.1℃。     

胺蒽类有机电致发光材料的合成和发光性能的研究

芳基伯胺与芳基溴在Pd(dba)2/P(t-Bu)3催化下于80℃甲苯溶液中反应生成芳基仲胺,芳基仲胺再与溴代蒽在Pd(OAc)2/P(t-Bu)3催化下于120℃邻二甲苯溶液中反应生成蒽类芳胺有机电致发光材料,产物的结构经1H NMR,13CNMR,13C(DEPT),MS(HREI和EI)光谱所证实.用UV-vis,PL,DSC测定了蒽类芳胺化合物的发光性能.     

傅克反应的异常产物

苯和草酰氯单乙酯在三氯化铝作用下发生傅克反应,在低温(0 ℃)条件下生成苯乙酮酸乙酯,而在高温(70 ℃)条件下首次得到了9,10-二甲基蒽,其结构经1H NMR,13C NMR和单晶X-衍射仪表征.     

超声提取-高效液相色谱法测定纺织品中5种同分异构CMR物质

采用超声提取结合高效液相色谱同时测定纺织品中5种同分异构CMR物质[苯并(j)荧蒽(Bj F)、苯并(e)芘(BeP)、苯并(b)荧蒽(BbF)、苯并(k)荧蒽(BkF)和苯并(a)芘(BaP)]的含量.样品0.500 g经20 mL体积比为1:1的甲醇-四氢呋喃混合溶剂于30℃超声提取30 min,提取液在Agile...     

新型正丁醛杯[4]芳烃醚衍生物的合成

以正丁醛间苯二酚杯[4]芳烃为原料,经酯化、水解、酰氯化后再与9-蒽甲醇反应,合成了蒽单取代的正丁醛间苯二酚型杯[4]芳烃醚衍生物。其结构经1H NMR和IR表征。     

CAN/PEG-400体系催化合成氧杂蒽二酮类衍生物

以硝酸铈铵(CAN)为催化剂,PEG-400为溶剂,芳香醛与β-环己二酮于85℃反应2.0 h～3.0 h合成了一系列氧杂蒽类衍生物,收率83%～96%,其结构经1H NMR和13C NMR确证。CAN/PEG-400可回收套用4次。     

6-溴-7-异丙基-1,10-二甲基-1,2,3,4-四氢蒽-1-羧酸的合成

以脱氢松香酸为原料,经酯化、溴代、氧化、异构化、水解等反应,合成了一种新型的四氢蒽羧酸类衍生物———6-溴-7-异丙基-1,10-二甲基-1,2,3,4-四氢蒽-1-羧酸,其结构经1H NMR,13C NMR,MS和元素分析表征。     

辽河和孤岛渣油供氢与生焦趋势

首先以蒽为化学探针对孤岛,辽河和胜利减压渣油及其四组分的氢转移能力进行表征,原理是,蒽与渣油在３５０－４００℃热反应,渣油向蒽供氢,使蒽率成９,１０－二氢蒽,用气相色谱分析定量测定热反应产物中的９,１０－二氢蒽,并计算出单位重量油样供氢量;然后在４００℃下热处理测定三种渣油的生焦诱导期。     

苯并[de]蒽-7-酮类叔芳胺的合成及其发光性能的研究

芳基伯胺与芳基溴在Pd(dba)2/P(t-Bu)3催化下于80 ℃甲苯溶液中反应生成芳基仲胺, 芳基仲胺再与3-溴苯并[de]蒽-7-酮在Pd(OAc)2/P(t-Bu)3催化下于120 ℃邻二甲苯溶液中反应生成苯并[de]蒽-7-酮类叔芳胺有机电致发光材料; 3-二苯基氨基苯并[de]蒽-7-酮与丙二腈反应生成2-(3-二苯基氨基)苯并[de]蒽-7-基亚基丙二腈. 产物的结构经1H NMR, 13C NMR, 13C (DEPT), HRMS光谱所证实. 用UV-Vis, PL, DSC测定了化合物的发光性能.     

Dowson型钼钒磷杂多酸催化H2O2氧化蒽制备蒽醌

合成了5种Dowson型杂多酸催化剂(Pn),并用于催化H2O2氧化蒽制备蒽醌的反应.结果表明Hs[P2Mo14V4O62H2](P5)的催化活性最好.最佳的氧化反应条件为:蒽5.6 mmol,n(蒽):n(H2O2)=1:11,P530 mg,溶剂正丁醇,于70 ℃反应1 h,产率达93.2%.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.