A wide band gap polymer derived from 3,6‐carbazole and tetraphenylsilane as host for green and blue phosphorescent complexes

We have synthesized a novel wide band gap polymer P36HCTPSi derived from 3,6‐carbazole and tetraphenylsilane by palladium‐catalyzed Suzuki coupling reaction. The resultant polymer shows a high glass transition temperature (217 °C) and good thermal stability. The conjugation length of P36HCTPSi is effectively confined because of the δ‐Si interrupted polymer backbone. The polymer exhibits a violet emission with a peak at 392 nm in solution, and the band gap estimated from the onset of its absorption is 3.26 eV. The high energy emission and wide band gap of P36HCTPSi make it appropriate host for green and blue emission phosphorescent materials. Efficient energy transfers from P36HCTPSi to both fac‐tris[2‐(2‐pyridyl‐kN)‐5‐methylphenyl]iridium(III) (green emission) and bis[(4,6‐difluorophenyl)pyridinato‐N,C²]‐(picolinato)iridium(III) (blue emission) were observed in photoluminescence (PL) spectra. Highly efficient phosphorescent polymer light‐emitting devices were realized by using P36HCTPSi as the host for iridium complexes, the maximum luminous efficiencies for green and blue devices were 27.6 and 3.4 cd/A, respectively. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4784–4792, 2009     

一种新型低带隙共轭聚合物的合成及其光学性质

在钯催化剂作用下, 通过4,7-二(5-溴-2-噻吩基)[2,1,3]苯并噻二唑与2,5-二乙炔基-3-辛基噻吩的偶联反应, 合成了一种新的共轭高分子聚4,7-二(2-噻吩基)苯并噻二唑-3-辛基噻吩二炔(PTE-DTBT). 通过紫外可见吸收光谱及荧光光谱对其光学性质进行了研究. 紫外-可见吸收谱结果表明, PTE-DTBT的固体膜光学带隙为1.71 eV; 电化学测试其带隙为1.88 eV. TiO₂/PTE-DTBT共混固体膜的荧光发射谱结果表明电子供体PTE-DTBT分子与电子受体TiO₂分子间存在有效的电子转移.     

A two-dimension medium band gap conjugated polymer based on 5,10-bis(alkylthien-2-yl)dithieno[3,2-d:3′,2′-d′]benzo[1,2-b:4,5-b′]dithiophene: Synthesis and photovoltaic application

A two-dimension medium band gap copolymer poly{5,10-bis(4,5-didecylthien-2-yl)dithieno[2,3-d:2′,3′-d′]benzo[1,2-b:4,5-b′]dithiophene-2,7-diyl-alt-2,5-di(3-octylthien-2-yl) thiophen-5,5′-diyl}, named as PDTBDT-T-3T, was prepared by the palladium-catalyzed Stille cross coupling reaction and characterized. The resulting polymer exhibits good solubility in common organic solvents, excellent thermal stability, and extensive light absorption from 300 nm to 650 nm with an optical band gap of 1.92 eV, the highest occupied molecular orbital (HOMO) level of ?5.03 eV and the hole mobility up to 1.92 × 10^?4 cm²·V^?1·s^?1. The power conversion efficiencies (PCEs) of 2.02%–3.19% have been achieved in the traditional PVCs for the copolymer. It should be noted that the PCEs of 4.2% for the inverted PVCs from the copolymer with PFN (poly[(9,9-bis(3′-(N,N-dimethylamino)propyl)-2,7-fluorene)-alt-2,7-(9,9-dioctyl- fluorene)]) as cathode modifying interlayer, were similar with the PCEs of 4.39% for the inverted PVCs from P3HT:PC₇₁BM at the same condition. These results indicated that the copolymer could be used as potential candidate for P3HT.     

含苯并硒二唑聚咔唑/芴类共轭聚电解质及其前驱体的合成与性能研究

采用Suzuki偶合反应合成了一系列新型的咔唑、芴和2,1,3-苯并硒二唑的共聚物——聚[3,6-(N-(2-乙基己基))咔唑-2,1,3-苯并硒二唑-9,9-双(N,N-二甲基胺丙基)芴](PCzN-BSeD)及其相应的聚电解质衍生物——聚[3,6-(N-(2-乙基己基))咔唑-2,1,3-苯并硒二唑-9,9-(双(3′-(N,N-二甲基)-N-乙基铵)丙基)芴]二溴(PCzNBr-BSeD).在聚咔唑和芴中引入不同比例的2,1,3-苯并硒二唑(BSeD)单元,引起了由咔唑和芴链段向窄带隙苯并硒二唑(BSeD)单元有效的能量转移.通过对聚合物电致发光性能的研究,发现用聚(3,4-亚乙基二氧基噻吩)(PEDOT)或聚(3,4-亚乙基二氧基噻吩)/聚乙烯咔唑(PEDOT/PVK)作为空穴传输层时,器件的性能相差不大,表明咔唑的引入较明显的改善了聚合物的空穴注入性能.而且几乎所有的聚合物用高功函数铝作阴极的器件和用钡/铝作阴极的器件具有相近的发光性能,表明这类聚合物具有良好的电子注入性能.     

2-糠醛缩N-乙基-3,6-二氨基咔唑双席夫碱的合成及其性能

以咔唑为起始原料经N-取代、硝化和还原反应制备中间体N-乙基-3,6-二氨基咔唑,然后以其与2-糠醛发生缩合反应制得新型双席夫碱化合物N-乙基-3,6-二(2-亚糠基亚氨基)咔唑,产率为72.36%。通过元素分析、FTIR、UV-Vis、1H NMR、溶液及固体荧光光谱、循环伏安(CV)和TG-DTA分析研究了标题化合物的分子结构、光物理特性、电化学特性和热稳定性。结果表明,化合物的DMF稀溶液在200~400 nm波段有较宽较强的紫外吸收;在365nm波长激发下,溶液发射深蓝色荧光,λem为446nm,固体荧光为λem=467nm的蓝色荧光,与溶液荧光相比固体荧光红移了21nm。由循环伏安测试得到产物的Eg=2.19e V,IP=4.99e V以及EA=2.80e V,说明其具有良好的空穴和电子传输材料性能。TG-DTA测试显示目标产物具有良好的热稳定性。该化合物在有机荧光、空穴注入传输材料以及电子传输材料方面具有潜在应用前景。     

Ultraviolet-emitting conjugated polymer poly(9,9'-alkyl-3,6-silafluorene) with a wide band gap of 4.0 eV

An ultraviolet-emitting conjugated polymer, poly(9,9'-alkyl-3,6-silafluorene) with a wide band gap of 4.0 eV, has been synthesized and characterized.     

基于1-(4-己氧)苯和2,4,6-三苯基-1,3,5-三嗪功能化芴单元的聚合物蓝光材料的合成与表征

以聚(9,9-二己烷芴)(1)和聚(9,9-二(1-(4-己氧)苯)芴)(2)作为参照物,通过Suzuki偶联反应合成了侧链9位碳含有4-己氧基苯和2,4,6-三苯基-1,3,5-三嗪单元的芴共聚物3.聚合物1,2和3固体粉末的5%质量热损失温度分别是274,318和401℃,玻璃化转变温度分别是91,120和139℃.聚合物1,2和3在甲苯溶液中的最大吸收峰和荧光发射峰分别在380和435 nm.从聚合物1到聚合物3,薄膜的荧光发射最大半峰宽逐渐降低.大体积刚性吸电子2,4,6-三苯基-1,3,5-三嗪基团的引入,使聚合物1,2和3的热稳定性、蓝光发射的色纯度和光谱稳定性逐渐提高,不同工作电压驱动下聚合物3稳定的电致发光光谱进一步证明了这一点.聚合物1,2和3的最高占有轨道能级分别为-5.72,-5.95和-5.96eV,最低未占有轨道能级分别为-2.70,-2.39和-2.43 eV.聚合物1,2和3的三线态能级分别为2.82,2.81和2.97 eV.聚合物1,2和3的单线态-三线态能级差分别是0.32,0.32和0.15 eV.4-己氧基苯的引入使聚合物的能隙变宽,而吸电子的2,4,6-三苯基-1,3,5-三嗪的引入使聚合物单线态-三线态能级差依次减少.聚合物1,2和3粉末均易于形成非晶薄膜.聚合物3粉末的有序性介于聚合物1和2之间,聚合物2侧链的烷氧基苯有助于提高固体粉末有序形态的多样化.综合结果表明,侧链含有刚性4-己氧基苯和2,4,6-三苯基-1,3,5-三嗪基团的无规共聚物3具有更佳的综合光电性质.     

Blue electroluminescence from 3,6‐silafluorene‐based copolymers

Poly(3,6‐silafluorene) is a typical wide band‐gap conjugated polymer with ultraviolet light emission. The blue electroluminescence from the 3,6‐silafluorene‐based copolymers via intrachain energy transfer was reported in this study. The monomer containing vinylene, anthracene, and tri‐arylamine moieties incorporated into the poly(3,6‐silafluorene) backbone can form efficient deep‐blue emitting copolymers with EL efficiency of 1.1–1.9%. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3286–3295, 2009     

Visible light sensitive photocatalyst, delafossite structured alpha-AgGaO(2)

Delafossite structured alpha-AgGaO(2) powder was successfully synthesized through a cation exchange reaction. alpha-AgGaO(2) has a band gap of 2.4 eV, absorbs visible light up to 520 nm, and effectively decomposes 2-propanol to CO2 via acetone by irradiating with either UV light (300-400 nm) or visible light (420-530 nm). The values of the quantum efficiency are similar (ca. 0.6%) under light irradiations with wavelengths of 365, 390, 430, 470, and 510 +/- 10 nm, but steeply decrease with wavelengths longer than 530 +/- 10 nm, which support a 2.4 eV band gap. In contrast, the other polymorph, alpha-AgGaO(2) powder, which has a band gap of 2.1 eV, shows a negligible activity when irradiating with either UV light or visible light. The higher oxidation activity of alpha-AgGaO(2) is probably due to its larger band gap, which is formed at the top of its valence band in a lower energy region as compared to alpha-AgGaO(2). Moreover, the first-principle calculations of alpha-AgGaO(2) and alpha-AgGaO(2) clearly indicate that alpha-AgGaO(2) has a remarkably larger dispersed valence band as compared to alpha-AgGaO(2), which is advantageous to the photocatalytic activity due to the efficient hole conduction.     

高分子光伏材料聚对苯乙烯撑-喹喔啉共聚物的合成与光学性能研究

高分子光伏材料聚对苯撑乙烯撑(PPV)由于低廉的价格, 容易加工的性能与可调的光学性能, 有可能成为新一代太阳能材料. 然而PPV较宽的带隙阻碍了PPV太阳能电池效率进一步提高. 合成了一种较低带隙的新型高分子光伏材料 PPV-PQ. 用NMR, FT-IR, 元素分析, GPC和TGA与循环伏安法对PPV-PQ进行了结构表征与性能检测, 并对它在氯仿溶液与固态薄膜下的紫外-可见吸收与荧光发射光谱进行了研究. 结果显示, 由于在固态下存在较强的分子间作用, 分子链的共平面性增加, 所以PPV-PQ无论是紫外-可见吸收, 还是荧光发射光谱, 在固态薄膜下都比在氯仿溶液里发生明显红移. 即使在浓溶液中, 分子链间也存在较强的作用力, 使得PPV-PQ荧光发射峰随溶液浓度的增加而发生红移. 紫外-可见光谱显示, PPV-PQ由于大体积的吸电子单元引起了较大的空间位阻, 最大吸收峰比PPV稍微蓝移, 但吸收却比PPV向长波延展, 带隙比PPV低, 只有1.92 eV. 循环伏安法结果表明PPV-PQ与PCBM两者的LUMO之间有足够的能量差异, 加上PPV-PQ与富勒烯衍生物C117共混物薄膜发生荧光猝灭, 都说明PPV-PQ上光激发电子能够转移到富勒烯衍生物上. 因此, PPV-PQ可以用作高分子光伏材料.     

Luminescent polymers with discrete emitter units

Optical absorption and photo-luminescence measurements were performed on a series of semiconducting polymers, based upon phenylene linkages, that have discrete emitter units. In these polymers, broken conjugation has been achieved in two ways: by introducing metalinkages between various numbers of para-connected aromatic groups or by severe steric distortion of a fully conjugated main chain. In either case, electronic states are localized on relatively small units, resulting in a large (π, π^*) band gap. The band gap decreases with increasing emitter unit conjugation, as expected. Blue light emission was observed from these materials, with the peak emission wavelength red shifted (by greater than 1 eV on average) from the peak absorption. © 1994 John Wiley & Sons, Inc.     

Efficient upconversion fluorescence in a blue-emitting spirobifluorene-anthracene copolymer doped with low concentrations of Pt(II)octaethylporphyrin

Upconversion-induced fluorescence in platinum-octaethylporphyrin (PtOEP)-doped thin films of a spirobifluorene-anthracene copolymer has been investigated. Upon exciting in the range of the absorption band (2.31 eV, 537 nm) of the guest molecules, blue fluorescence (2.75 eV, 450 nm) from the spirobifluorene host was observed. The intensity of the upconverted emission was found to be one order of magnitude higher than from a PtOEP doped but anthracene-free spirobifluorene copolymer and than previously reported for metallated porphyrin-doped polyfluorene samples. It is argued that the efficient upconversion originates from the triplet energy transfer from the phosphorescent dopant to the sensitive unit of the host polymer, followed by triplet-triplet annihilation and finally blue emission from the spirobifluorene host polymer backbone.     

Synthesis of n-type conjugated polymers for bulk heterojunction solar cells

A new conjugated alternating donor-acceptor copolymer is synthesized from perylene diimide and the benzodithiophene derivative via the Suzuki reaction. Temperatures corresponding to the 10% weight loss of the copolymer in air and argon are 336 and 362°C. The copolymer is soluble in common organic solvents. The maxima of absorption spectra of the copolymer in chloroform solution and thin films are at 456 and 567 and at 444 and 567 nm, respectively. The optical band gap, as calculated from the onset of the absorption spectrum, is 1.74 eV, and the electrochemical band gap is 1.89 eV. The energies of HOMO and LUMO derived from the onset of the first oxidation and reduction potential of the cyclic voltamperogram are ?5.97 and ?4.08 eV. It is found that the solar cell with copolymer-to-poly(3-hexylthiophene) = 1: 1 features the best characteristics: The open circuit voltage is 0.54 V, the short circuit current is 0.976 mA/cm², the fill factor is 0.397, and the efficiency is 0.14%. The conjugated polymer based on perylene diimide belongs to the class of n-type polymers and shows promise as an acceptor material for all-polymer bulk heterojunction solar cells.     

Direct arylation synthesis of thienoisoindigo‐based low‐band‐gap polymer from asymmetric donor–acceptor monomer

Thienoisoindigo (TIG) moiety has been paid numerous attentions as an excellent acceptor building block in low‐band‐gap polymers. Herein, a new TIG‐dithiophene alternating copolymer (PTIG2T) was successfully synthesized from an asymmetric TIG‐based donor–acceptor (D‐A) monomer via the self‐condensation‐type direct arylation polymerization. PTIG2T exhibited the light absorption over 1000 nm owing to the intramolecular charge transfer in the thin film state, which corresponded to an optical band gap of 1.24 eV. The HOMO and LUMO levels of PTIG2T were determined to be −5.08 and −3.60 eV, respectively. Furthermore, the organic photovoltaic (OPV) with a PTIG2T/PC₆₁BM active layer achieved a power conversion efficiency (PCE) of 3.19%, which is one of the highest PEC achieved by OPVs with TIG‐based materials. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 430–436     

Characterization and photocatalytic activity of Fe- and N-co-deposited TiO2 and first-principles study for electronic structure

Titanium dioxide (TiO₂), co-deposited with Fe and N, is first implanted with Fe by a metal plasma ion implantation (MPII) process and then annealed in N₂ atmosphere at a temperature regime of 400-600 °C. First-principle calculations show that the (Fe, N) co-deposited TiO₂ films produced additional band gap levels at the bottom of the conduction band (CB) and on the top of the valence band (VB). The (Fe, N) co-deposited TiO₂ films were effective in both prohibiting electron-hole recombination and generating additional Fe-O and N-Ti-O impurity levels for the TiO₂ band gap. The (Fe, N) co-deposited TiO₂ has a narrower band gap of 1.97 eV than Fe-implanted TiO₂ (3.14 eV) and N-doped TiO₂ (2.16 eV). A significant reduction of TiO₂ band gap energy from 3.22 to 1.97 eV was achieved, which resulted in the extension of photocatalytic activity of TiO₂ from UV to Vis regime. The photocatalytic activity and removal rate were approximately two-fold higher than that of the Fe-implanted TiO₂ under visible light irradiation.     

Design,synthesis, photophysical,and electrochemical properties of DCM‐based conjugated polymers for light‐emitting devices

A series of conjugated hyperbranched polymers, hyperbranched copolymers, and linear polymers containing 2‐pyran‐4‐ylidenemalononitrile (acceptor) and triphenylamine/fluorene (donor) units were synthesized and characterized by FTIR, ¹H NMR, thermogravimetric analyses, differential scanning calorimetry, gel permeation chromatography, UV–visible, photoluminescence, and cyclic voltammetry measurements. All the polymers show red‐light emission in the range of 566–656 nm both in solution and in solid state. The quantum efficiency of the polymers was in the range of 56–82%. Among the six polymers synthesized, only polymers containing fluorene units show T_g and polymers based on triphenylamine not exhibit T_g. The band gap of these polymers were found to be reasonably low; hyperbranched copolymer containing fluorene unit shows lowest band gap of 2.18 eV due to the stabilization of LUMO energy level by the electron withdrawing ? CN groups. The thermal and solubility behavior of the polymers were found to be good. All the EL spectra of the devices (indium‐tin oxide/poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate)/polymer/2,9‐dimethyl‐4,7‐diphenyl‐1,10‐phenanthroline/tris(8‐hydroxyquinoline)aluminum)/LiF/Al) show red‐light emission, and the device fabricated with P3 and P4 shows maximum luminance and luminous efficiency of 4104 cd m^?2 and 0.55 cd Å^?1 and 3696 cd m^?2 and 0.47 cd Å^?1, respectively, indicates that they had the best carrier balance. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Triarylamine N‐functionalized 3,6‐linked carbazole main chain polymers and copolymers: Preparation and physical properties

The preparation of triarylamine N‐functionalized 3,6‐linked carbazole homopolymers as well as alternating copolymers with 2,5‐diphenyl‐[1,3,4]oxadiazole and benzo[1,2,5]thiadiazole was undertaken using Suzuki cross‐coupling polymerization procedures associating 3,6‐bis(4,4,5,5‐tetramethyl‐[1,3,2]dioxaborolan‐2‐yl)‐9‐(bis[4‐(2‐butyl‐octyloxy)‐phenyl]‐amino‐phen‐4‐yl)‐carbazole and, respectively, 3,6‐dibromo‐9‐(bis[4‐(2‐butyl‐octyloxy)‐phenyl]‐amino‐phen‐4‐yl)‐carbazole, 2,5‐bis(4‐bromo‐phenyl)‐[1, 3,4]oxadiazole, and 4,7‐dibromo‐benzo[1,2,5]thiadiazole. Both the carbazole homopolymer and alternating copolymer with 2,5‐diphenyl‐[1,3,4]oxadiazole were found as wideband gap materials emitting in the blue part of the electromagnetic spectrum while the carbazole alternating copolymer with 4,7‐benzo[1,2,5]thiadiazole had a narrower band gap and emitted in the orange part of the electromagnetic spectrum. The new polymers are thermally stable up to 300 °C. A discussion of the electrochemical and optical properties of the new polymers is presented. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5957–5967, 2007.     

Band alignment and defect states in amorphous GaInZnO thin films grown on SiO2/Si substrates

The band alignment and defect states of GaInZnO thin films grown on SiO₂/Si via radio frequency (RF) magnetron sputtering were investigated by using X‐ray photoelectron spectroscopy, reflection electron energy loss spectroscopy, thermally stimulated exo‐electron emission and photo‐induced current transient spectroscopy.The band gap via reflection electron energy loss spectroscopy was 3.2 eV. The defect states via photo‐induced current transient spectroscopy and thermally stimulated exo‐electron emission were at 0.24, 0.53, 1.69 and 2.01 eV below the conduction band minimum of GIZO thin films, respectively. The defect states at 0.24 and 0.53 eV are related to the field‐effect mobility, and the defect stated at 1.69 and 2.01 eV is related to the oxygen vacancy defect. Copyright © 2016 John Wiley & Sons, Ltd.     

A low-band gap conductive copolymer of bis-3-hexylthiophene substituted 4-tert-butylphenyl quinoxaline and 3,4-ethylenedioxythiophene

Electrochemical copolymerization of 2,3-bis(4-tert-butylphenyl)-5,8-bis(4-hexylthiophen-2-yl)quinoxaline (HTQ) and 3,4-ethylenedioxythiophene (EDOT) was performed to fulfill a strategy in achieving fine-tuned electrochromic properties. The copolymer, P(HTQ-co-EDOT) was characterized via detailed studies of cyclic voltammetry and spectroelectrochemistry. Copolymer film has many superior properties compared to the parent homopolymer. E _g of the copolymer was calculated as 1.4 eV, which is substantially lower than the homopolymer’s (PHTQ) band gap, which was reported as 1.75 eV. Optical contrast of the resultant copolymer was shown to be 34%, which is nearly 10% higher than the PHTQ. The most striking achievement in the electrochromic properties was in switching times. The copolymer switches very rapidly between its neutral and the oxidized states and achieves a 34% optical contrast in less than 1 s, half of the value for the pristine polymer.     

Synthesis, characterization and solar cell application of a D-A copolymer with cyclopentadithiophene and fluorene as donor units

In this paper, a new D-A copolymer, PFDBCPDT, which consists of benzo-2,1,3-thiadiazole as acceptor units and cyclopentadithiophene and fluorene as donor units, was synthesized. The thermal, electrochemical, photophysical and photovoltaic properties of PFDBCPDT were studied. PFDBCPDT showed a low optical band gap of 1.84 eV, and relatively low HOMO level of ?5.69 eV. The best device performance was obtained by PFDBCPDT/PC₆₁BM (1:3) with 0.5 vol% DIO. The device exhibited a power conversion efficiency of 3.06%, with a relatively high open circuit voltage of 0.87 eV.