Highly effective binding and inverse fluorescent behavior of palmatine and l-tetrahydropalmatine alkaloids by p-sulfonatocalixarenes

The effects of pressure and solvent were examined for the inclusion complexation of phenothiazine dyes and trans-4-[4-(dimethylamino)styryl]-1-methylpyridinium (St-4Me) with water-soluble p-sulfonatocalix[8]arene (Calix-S8). Depending on the bulkiness of the guest dyes, external pressures and solvent polarity increase the inclusion equilibrium constants of dyes with Calix-S8. From the pressure dependence of the inclusion equilibria, the reaction volumes for inclusion by Calix-S8 in the alcohol-water mixtures were estimated to be negative values (?19.8 to ?5.29 cm³ mol^?1 for the phenothiazine dyes and ?13.1 to ?9.85 cm³ mol^?1 for St-4Me). Analysis of the results of the high pressure indicated that the intrinsic volume change related to inclusion into the Calix-S8 cavity plays an important role in the inclusion of Calix-S8, depending on the bulkiness of the guest molecules. Based on ¹H NMR measurements, the structures of the inclusion complexes of Calix-S8 with phenothiazine dyes have been established and the differences in the inclusion behaviors of the phenothiazine dyes and St-4Me are discussed.     

Synthesis of novel chromogenic azocalix[4]arenemonoquinones and their binding with alkali metal cations

Five new chromogenic azocalix[4]arenemonoquinones have been synthesized, characterized and examined for their interaction with alkali metal cations (Li⁺, Na⁺, K⁺, Rb⁺ and Cs⁺) by UV-visible spectroscopic and cyclic voltammetric techniques. It has been determined that 4a selectively exhibits a significant bathochromic shift in its UV-visible spectrum on interaction with potassium ion in comparison to its treatment with other alkali metal cations. The binding stoichiometry of 4a and potassium ion was established to be 1:1 with an association constant of 3.27 × 10⁴ M^?1. Cyclic voltammetric experiments in 4:1 dichloromethane-acetonitrile also revealed a significant anodic shift (ΔE _(1/1′) = 115 mV) of the original redox waves of 4a on interaction with potassium ion.     

Solvent effect on complexation reactions

The inclusion complexation of aromatic amines with cucurbit[6]uril (CB[6]) capped with alkali metal cations was studied spectrophotometrically. We showed that CB[6] capped with alkali metal cations forms a 1:1 inclusion complex with the aromatic amine guests (neutral organic molecules), independent of the length of guest molecules. The effects of salts on the inclusion constants of CB[6] in the presence of different alkali salts were examined and it was found that the inclusion constants increased in the order of alkali cation Cs⁺ < Na⁺ < K⁺, suggesting the interaction of amine guests with the capped alkali metal cation. Further, the structures of the inclusion complexation of aromatic amines with CB[6] were characterized by ¹H NMR measurements. Based on the results, the inclusion abilities of CB[6] capped with alkali metal cations are discussed.     

Selective complexation of alkali metal ions and nanotubular cyclopeptides: a DFT study

A density functional theory based on interaction of alkali metal cations (Li⁺, Na⁺, K⁺, Rb⁺ and Cs⁺) with cyclic peptides constructed from 3 or 4 alanine molecule (CyAla3 and CyAla4), has been investigated using mixed basis set (C, H, O, Li⁺, Na⁺ and K⁺ using 6-31+G(d), and the heavier cations: Rb⁺ and Cs⁺ using LANL2DZ). The minimum energy structures, binding energies, and various thermodynamic parameters of free ligands and their metal cations complexes have been determined with B3LYP and CAM-B3LYP functionals. The order of interaction energies were found to be Li⁺ > K⁺ > Na⁺ > Rb⁺ > Cs⁺ and Li⁺ > Na⁺ > K⁺ ? Rb⁺ > Cs⁺, calculated at CAM-B3LYP level for the M/CyAla3 and M/CyAla4 complexes, respectively. Their selectivity trend shows that the highest cation selectivity for Li⁺ over other alkali metal ions has been achieved on the basis of thermodynamic analysis. The main types of driving force host–guest interactions are investigated, the electron-donating O offers lone pair electrons to the contacting LP* of alkali metal cations.     

The “True” Affinities of Metal Cations to p‐Sulfonatocalix[4]arene: A Thermodynamic Study at Neutral pH Reveals a Pitfall Due to Salt Effects in Microcalorimetry

A microcalorimetric study on the inclusion of monovalent and divalent metal cations by p‐sulfonatocalix[4]arene was performed. The thermodynamic parameters for the complexation of alkali metal cations and Ag⁺ were obtained for the first time at neutral pH. The Na⁺ cation is routinely present as counterion of the calixarene in neutral aqueous solution, and this must be taken into account in the determination of the thermodynamic parameters for the complexation of Na⁺ and the other cations by considering a sequential or a competitive binding scheme. The ΔH° and ΔS° values show that the inclusion process is entropically driven, although an influence of the temperature on the complexation reaction indicates that the enthalpic term is also an important contributor. The results also reveal that enthalpy/entropy compensation balances the gain in one contribution against a corresponding loss in the other. The obtained thermodynamic data are in contrast to the results from previous microcalorimetric studies, which showed binding constants that were orders of magnitude smaller and complexations, which were in part enthalpically driven but which neglected the influence of the alkali metal counterions.     

Synthesis of Double-Armed Benzo-15-crown-5 and Their Complexation Thermodynamics with Alkali Cations

A series of double-armed benzo-15-crown-5 lariats (3–8) have been synthesized by the reaction of 4′, 5′-bis(bromomethyl)-benzo-15-crown-5 (2) with 4-hydroxybenzaldehyde, phenol, 4-chlorophenol, 4-methoxyphenol, 2-hydroxybenzaldehyde, and 4-acetamidophenol in 43 ~ 82% yields, respectively. The complex stability constants (K _S) and thermodynamic parameters for the stoichiometric 1:1 and/or 1:2 complexes of benzo-15-crown-5 1 and double-armed crown ethers 3–8 with alkali cations (Na⁺, K⁺, Rb⁺) have been determined in methanol–water (V/V=8:2) at 25 °C by means of microcalorimetric titrations. As compared with the parent benzo-15-crown-5 1, double-armed crown ethers 3–8 show unremarkable changes in the complex stability constants upon complexation with Na⁺, but present significantly enhanced binding ability toward cations larger than the crown cavity by the secondly sandwich complexation. Thermodynamically, the sandwich complexations of crown ethers 3-8 with cations are mostly enthalpy-driven processes accompanied with a moderate entropy loss. The binding ability and selectivity of cations by the double-armed crown ethers are discussed from the viewpoints of the electron density, additional binding site, softness, spatial arrangement, and especially the cooperative binding of two crown ether molecules toward one metal ion.     

Mass spectrometric studies of alkali metal ion binding on thrombin-binding aptamer DNA

The binding sites and consecutive binding constants of alkali metal ions, (M⁺ = Na⁺, K⁺, Rb⁺, and Cs⁺), to thrombin-binding aptamer (TBA) DNA were studied by Fourier-transform ion cyclotron resonance spectrometry. TBA-metal complexes were produced by electrospray ionization (ESI) and the ions of interest were mass-selected for further characterization. The structural motif of TBA in an ESI solution was checked by circular dichroism. The metal-binding constants and sites were determined by the titration method and infrared multiphoton dissociation (IRMPD), respectively. The binding constant of potassium is 5–8 times greater than those of other alkali metal ions, and the potassium binding site is different from other metal binding sites. In the 1:1 TBA-metal complex, potassium is coordinated between the bottom G-quartet and two adjacent TT loops of TBA. In the 1:2 TBA—metal complex, the second potassium ion binds at the TGT loop of TBA, which is in line with the antiparallel G-quadruplex structure of TBA. On the other hand, other alkali metal ions bind at the lateral TGT loop in both 1:1 and 1:2 complexes, presumably due to the formation of ion-pair adducts. IRMPD studies of the binding sites in combination with measurements of the consecutive binding constants help elucidate the binding modes of alkali metal ions on DNA aptamer at the molecular level.     

Chromogenic azole diazothiacrown ethers

Azocrown ethers with sulphur atoms and pyrrole or imidazole residue as a part of macrocycle have been synthesised. Their metal complexation abilities in acetonitrile were studied using UV–vis spectrophotometry. The largest spectral changes were observed for both pyrrole- and imidazole-azothiacrown ethers on complexation with Pb^2 + , Cu^2 + , Zn^2 + , Ni^2 + , Co^2 +  and Ag⁺ ions. In the case of alkali and alkaline earth metal ions no spectral changes were found. Preliminary studies of ion-selective membrane electrodes with synthesised ionophores are presented. In the measurement for transition/heavy metal cations, only copper and lead give high responses. X-ray structure of 18-membered pyrrole azothiacrown ether is described.     

Hydrogen Bonding and Solvent Effects on Complexation of Alkali Metal Cations by Lower Rim Calix[4]arene Tetra(O-[N-acetyl-D-phenylglycine methyl ester]) Derivative

Complexation of alkali metal cations with 5,11,17,23-tetra-tert-butyl-26,28,25,27-tetrakis(O-methyl-D-α-phenylglycylcarbonylmethoxy)calix[4]arene (L) was studied by means of spectrophotometric, conductometric and potentiometric titrations at 25 °C. The solvent effect on the binding ability of L was examined by using two solvents with different affinities for hydrogen bonding, viz. methanol and acetonitrile. Despite the presence of intramolecular NH···O=C hydrogen bonds in L, which need to be disrupted to allow metal ion binding, this calix[4]arene amino acid derivative was shown to be an efficient binder for smaller Li⁺ and Na⁺ cations in acetonitrile (lg K _LiL  > 5, lg K _NaL  = 7.66), moderately efficient for K⁺ (lg K _KL  = 4.62), whereas larger Rb⁺ and Cs⁺ did not fit in its hydrophilic cavity. The complex stabilities in methanol were significantly lower (lg K _NaL  =  4.45, lg K _KL  = 2.48). That could be explained by different solvation of the cations and by competition between the cations and methanol molecules (via hydrogen bonds) for amide carbonyl oxygens. The influence of cation solvation on complex stability was most pronounced in the case of Li⁺ for which, contrary to the quite stable LiL ⁺ complex in acetonitrile, no complexation was observed in methanol under the conditions used.     

Inclusion complexation of octaethyl-p-tert-butylcalix[8]arene octaacetate with methylene blue and control of its inclusion ability by alkali metal cations

The equilibrium constants for the inclusion complexation of octaethyl-p-tert-butylcalix[8]arene octaacetate (Calix-B8-EA) with methylene blue (MB) were determined spectrophotometrically. Calix-B8-EA, which has a flexible hydrophilic pseudo-cavity formed by polyfunctional esters on the lower rim, is an effective receptor for alkali and alkaline-earth cations, and its ester carbonyl group forms the complex with metal cations. We have examined the ability to include the organic molecule (methylene blue (MB)) into the upper main cavity of Calix-B8-EA formed the complex of alkali metal cations with ester carbonyl groups on the lower rim. It was found that Calix-B8-EA forms a 1:1 inclusion complex of MB with the upper main cavity and, in the presence of excess alkali metal cations, the association constants increase with an increase in the size of the metal cations complexed with the polyfunctional groups on the lower rim. Further, the structure of the inclusion complex of MB with cation-complexed Calix-B8-EA is characterized by 2D ROESY-NMR measurements. Based on the results, we have demonstrated the control of the inclusion ability by changing the portal size of the calixarene cavity.     

Adsorption of hydrogen and methane on intrinsic and alkali metal cations-doped Zn<Subscript>2</Subscript>(NDC)<Subscript>2</Subscript>(diPyTz) metal–organic framework using GCMC simulations

In this study, the adsorption of hydrogen and methane on the Zn₂(NDC)₂(diPyTz) [(NDC = 2,6-naphthalenedicarboxylate, diPyTz = di-3,6-(4-pyridyl)-1,2,4,5-tetrazine)] metal–organic framework (MOF) and the effect of its doping with alkali metal cations (Li⁺, Na⁺, K⁺) were investigated using Grand Canonical Monte Carlo simulations. The results indicated that the triply catenating Zn₂(NDC)₂(diPyTz), possessing small pores preferentially adsorbed hydrogen. Doping of Zn₂(NDC)₂(diPyTz) with alkali metal cations enhanced the hydrogen adsorption on the MOF. However, this enhancement became weaker as the atomic number of metal cation increased. The simulation results showed that the hydrogen adsorption on the Li⁺-doped Zn₂(NDC)₂(diPyTz) was almost 2.35 times greater than that of the corresponding undoped MOF at low pressure and room temperature. This suggests that the doping of MOFs with alkali metal cations especially lithium is a desired strategy for hydrogen storage. Furthermore, the results revealed that the adsorption of hydrogen on the Zn₂(NDC)₂(diPyTz) was higher than that of methane at room temperature.     

Synthesis of Double-Armed Benzo-15-crown-5 and Their Complexation Thermodynamics with Alkali Cations

A series of double-armed benzo-15-crown-5 lariats (3–8) have been synthesized by the reaction of 4′, 5′-bis(bromomethyl)-benzo-15-crown-5 (2) with 4-hydroxybenzaldehyde, phenol, 4-chlorophenol, 4-methoxyphenol, 2-hydroxybenzaldehyde, and 4-acetamidophenol in 43 ~ 82% yields, respectively. The complex stability constants (K _S) and thermodynamic parameters for the stoichiometric 1:1 and/or 1:2 complexes of benzo-15-crown-5 1 and double-armed crown ethers 3–8 with alkali cations (Na⁺, K⁺, Rb⁺) have been determined in methanol–water (V/V=8:2) at 25 °C by means of microcalorimetric titrations. As compared with the parent benzo-15-crown-5 1, double-armed crown ethers 3–8 show unremarkable changes in the complex stability constants upon complexation with Na⁺, but present significantly enhanced binding ability toward cations larger than the crown cavity by the secondly sandwich complexation. Thermodynamically, the sandwich complexations of crown ethers 3-8 with cations are mostly enthalpy-driven processes accompanied with a moderate entropy loss. The binding ability and selectivity of cations by the double-armed crown ethers are discussed from the viewpoints of the electron density, additional binding site, softness, spatial arrangement, and especially the cooperative binding of two crown ether molecules toward one metal ion.Graphical Abstract Synthesis of Double-Armed Benzo-15-crown-5 and Their Complexation Thermodynamics with Alkali CationsYU LIU*, JIAN-RONG HAN, ZHONG-YU DUAN and HENG-YI ZHANG This revised version was published online in July 2005 with a corrected issue number.     

Solvent extraction and self-assembly of nanosized aggregates of p-tert-butyl thiacalix[4]arenes tetrasubstituted at the lower rim by tertiary amide groups and monocharged metal cations in the organic phase

New p-tert-butyl thiacalix[4]arenes functionalized with morpholide and pyrrolidide groups at the lower rim in cone, partial cone, and 1,3-alternate conformations were synthesized, and their receptor properties for monocharged cations (alkali metal and silver ions) were studied using the picrate extraction method and dynamic light scattering (DLS). To evaluate the ability of the p-tert-butyl thiacalix[4]arene derivatives to recognize metal ions, liquid-liquid extraction of their picrate salts has been carried out in a mutually saturated water-dichloromethane system. The degrees of extraction and the extraction constants for monocharged metal cations (Li⁺, Na⁺, K⁺, Cs⁺) have been determined. The ability of the systems, consisting of host and guest molecules, to self-assembly was proved by DLS using a Zetasizer Nano ZS particle size analyzer. It was shown that all the investigated thiacalix[4]arenes are able to form nanoscale particles with silver cations under the experimental conditions. The pyrrolidide derivative in the cone conformation showed both self-association and aggregation processes with lithium cations. The degree of extraction for all the investigated systems that formed nanoscale aggregates in the organic phase was more than 67% and the extraction constants, log K_ex determined by the picrate extraction method, more than 6.     

A DFT study of the complexation behavior of hemispherands toward alkali metal cations

A density functional theory study of the behavior of hemispherands toward alkali metal ions (Li⁺, Na⁺, and K⁺) is performed. The effect of the replacement of the rigid anisyl group(s) by the mobile ether group(s) on the binding energy of hemispherands with alkali metal ions is investigated. The results indicated that the binding energies are inversely proportional to the ionic radius of the cations. Moreover, increasing the flexibility of the ligand results in decreasing the binding toward small ions. The structures of the hosts and the guests are correlated to the binding energies, and the correlations are interpreted in terms of the principle of preorganization. © 2010 Wiley Periodicals, Inc. Int J Quantum Chem, 2010     

Cations in a Molecular Funnel: Vibrational Spectroscopy of Isolated Cyclodextrin Complexes with Alkali Metals

The benchmark inclusion complexes formed by α‐cyclodextrin (αCD) with alkali‐metal cations are investigated under isolated conditions in the gas phase. The relative αCD‐M⁺ (M=Li⁺, Na⁺, K⁺, Cs⁺) binding affinities and the structure of the complexes are determined from a combination of mass spectrometry, infrared action spectroscopy and quantum chemical computations. Solvent‐free laser desorption measurements reveal a trend of decreasing stability of the isolated complexes with increasing size of the cation guest. The experimental infrared spectra are qualitatively similar for the complexes with the four cations investigated, and are consistent with the binding of the cation within the primary face of the cyclodextrin, as predicted by the quantum computations (B3LYP/6‐31+G*). The inclusion of the quantum‐chemical cation disrupts the C₆ symmetry of the free cyclodextrin to provide the optimum coordination of the cations with the ‐CH₂OH groups in C₁, C₂ or C₃ symmetry arrangements that are determined by the size of the cation.     

Selective Complexation of S‐block Cations with Nanotubular Silk Type Cyclopeptides: A DFT Study

Density functional theory (DFT) was used to study the interaction of alkali metal cations (Li⁺, Na⁺ and K⁺) with cyclic peptides constructed from silk type macrocycles ( Silk1, Silk2, Silk3, Silk4, Silk5 and Silk6 ). The calculated binding energies were used as a base for investigating the selectivity of the cyclic peptides in biniding to considered metals ions. The highest cation selectivity for Li⁺ compared to the other alkali metal ions was observed. The orbital nature of different interactions between the metal cations and the cyclic peptides was analyzed using NBO analysis. The main types of driving force for host‐guest interactions was investigated and it was found that the electron‐donating O offers lone pair electrons to the contacting LP* of alkali metal cations     

Quantum chemical study of the interaction between selenium analog of methimazole as an anti-thyroid drug and metal cations

Energetic and structural properties of complexes formed from interaction between selenium analog of methimazole (MSeI) as an anti-thyroid drug and M^z+ (Li⁺, Na⁺, K⁺, Be²⁺, Mg²⁺ and Ca²⁺) cations have been investigated using B3LYP, M062X, PBE1PBE, and MP2 methods with 6-311++G(d,p) and 6-311++G(2d,2p) basis sets. Two planar and perpendicular complexes were predicted from interaction of MSeI and M^z+ cations. From the Gibbs free energy difference between the planar and perpendicular forms of MSeI–M^z+ complexes, it is found that the perpendicular forms are the predominant ones. In addition, the comparison of interaction energies shows that the order of energies increases in the following order: K⁺ < Na⁺ < Li⁺ < Ca²⁺ < Mg²⁺ < Be²⁺. The results of natural bond orbital analysis showed that the charge transfer occurs from MSeI to metal cations. The atom in molecule analysis shows that the charge density and its Laplacian at the Se–M^z+ bond critical point of the MSeI–M²⁺ complexes are greater than the MSeI–M¹⁺ ones. Also, it was revealed that the Se–M^z+ interactions in perpendicular complexes of alkali and alkaline metal cations are electrostatic and partially covalent in nature, respectively.     

Spectrophotometric studies of alkali and alkali earth metal ions complexes of mono amino derivative of calix[4]arene

The synthesis and complexive abilities of 5,11,17-tris(tert-butyl)-23 amino-25,26,27,28-tetra-propoxycalix[4]arene towards alkali cations Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺ and alkali earth cations Mg²⁺, Ca²⁺, Sr²⁺ and Ba²⁺ in methanol-chloroform mixture have been evaluated at 25°C, using UV-Vis spectrophotometric techniques. The results showed that the ligand is capable to complex with all the cations by 1: 1 metal to ligand ratios. The selectivity presented considering the calculated formation constants are in the order Li⁺ > Na⁺ > K⁺ > Rb⁺ > Cs⁺ and Mg²⁺ > Ca²⁺ > Sr²⁺ > Ba²⁺ with the ligand.     

The nature of ion exchange selectivity of phenol-formaldehyde sorbents with respect to cesium and rubidium ions

The structure of aqua complexes of alkali metal ions Me⁺(H₂O) _n , n = 1−6, where Me is Li, Na, K, Rb, and Cs, and complexes of 2,6-dimethylphenolate anion (CH₃)₂PhO⁻ selected as a model of the elementary unit of phenol-formaldehyde ion exchanger with hydrated alkali metal cations Me⁺(H₂O) _n , n = 0−5, was studied by the density functional method. The energies of successive hydration of the cations and the energies of binding of alkali metal hydrated cations with (CH₃)₂PhO⁻ depending on the number of water molecules n were calculated. It was shown that the dimethylphenolate ion did not have specific selectivity with respect to cesium and rubidium ions. The energies of hydration and the energies of binding of alkali metal cations with (CH₃)₂PhO⁻ decreased in the series Li⁺ > Na⁺ > K⁺ > Rb⁺ > Cs⁺ as n increased. The conclusion was drawn that the reason for selectivity of phenol-formaldehyde and other phenol compounds with respect to cesium and rubidium ions was the predomination of the ion dehydration stage in the transfer from an aqueous solution to the phenol phase compared with the stage of binding with ion exchange groups.     

ACE applied to the quantitative characterization of benzo‐18‐crown‐6‐ether binding with alkali metal ions in a methanol–water solvent system

ACE was applied to the quantitative evaluation of noncovalent binding interactions between benzo‐18‐crown‐6‐ether (B18C6) and several alkali metal ions, Li⁺, Na⁺, K⁺, Rb⁺ and Cs⁺, in a mixed binary solvent system, methanol–water (50/50 v/v). The apparent binding (stability) constants (K_b) of B18C6–alkali metal ion complexes in the hydro‐organic medium above were determined from the dependence of the effective electrophoretic mobility of B18C6 on the concentration of alkali metal ions in the BGE using a nonlinear regression analysis. Before regression analysis, the mobilities measured by ACE at ambient temperature and variable ionic strength of the BGE were corrected by a new procedure to the reference temperature, 25°C, and the constant ionic strength, 10 mM . In the 50% v/v methanol–water solvent system, like in pure methanol, B18C6 formed the strongest complex with potassium ion (log K_b=2.89±0.17), the weakest complex with cesium ion (log K_b=2.04±0.20), and no complexation was observed between B18C6 and the lithium ion. In the mixed methanol–water solvent system, the binding constants of the complexes above were found to be about two orders lower than in methanol and about one order higher than in water.