声场中水力空化泡的动力学特性

以水为工作介质,考虑了液体黏性、表面张力、可压缩性及湍流作用等情况,对文丘里管反应器中空化泡在声场作用下的动力学行为特性进行了数值研究.分析了超声波频率、声压及喉径比对空化泡运动特性以及空化泡崩溃时所形成泡温以及压力脉冲的影响.结果表明,超声将水力空化泡运动调制成稳态空化,有利于增强空化效果. 关键词： 超声波 水力空化 湍流 气泡动力学     

声场与电场作用下空化泡的动力学特性

以液体为工作介质, 利用空化泡的RP控制方程, 模拟分析了无量纲化的电场频率、场强的幅值以及无量纲化的声波频率、 声压幅值的变化对空化泡运动特性的影响. 结果表明: 声场和电场联合作用时, 空化泡运动处于混沌区域范围远高于两者单独作用下空化泡的混沌区域范围. 这不仅对声空化的进一步研究具有重要的理论意义, 而且对于提高和改进空化降解有机污染物的技术也具有指导意义.     

Spectral characteristics of acoustic cavitation

This paper reports on theoretical research into the dynamics, acoustic noise and noise spectrum of a single cavitation bubble affected by non-gradiental acoustic fields. It is shown that all the characteristic features of experimental acoustic cavitation spectra occur in the spectrum of a single bubble.     

Numerical modelling of acoustic cavitation threshold in water with non-condensable bubble nuclei

Numerical modelling of acoustic cavitation threshold in water is presented taking into account non-condensable bubble nuclei, which are composed of water vapor and non-condensable air. The cavitation bubble growth and collapse dynamics are modeled by solving the Rayleigh-Plesset or Keller-Miksis equation, which is combined with the energy equations for both the bubble and liquid domains, and directly evaluating the phase-change rate from the liquid and bubble side temperature gradients. The present work focuses on elucidating acoustic cavitation in water with a wide range of cavitation thresholds (0.02–30 MPa) reported in the literature. Computations for different nucleus sizes and acoustic frequencies are performed to investigate their effects on bubble growth and cavitation threshold. The numerical predictions are observed to be comparable to the experimental data in the previous works and show that the cavitation threshold in water has a wide range depending on the bubble nucleus size.     

Numerical simulations of stable cavitation bubble generation and primary Bjerknes forces in a three-dimensional nonlinear phased array focused ultrasound field

We present a model developed for studying the generation of stable cavitation bubbles and their motion in a three-dimensional volume of liquid with axial symmetry under the effect of finite-amplitude phased array focused ultrasound. The density of bubbles per unit volume is determined by a nonlinear law which is a threshold-dependent function of the negative acoustic pressure reached in the liquid, in which nuclei are initially distributed. The nonlinear mutual interaction of ultrasound and bubble oscillations is modeled by a nonlinear coupled differential system formed by the wave and a Rayleigh-Plesset equations, for which both the pressure and the bubble oscillation variables are unknown. The system, which accounts for nonlinearity, dispersion, and attenuation due to the bubbles, is solved by numerical approximations. The nonlinear acoustic pressure field is then used to evaluate the primary Bjerknes force field and to predict the subsequent motion of bubbles. In order to illustrate the procedure, a medium-high and a low ultrasonic frequency configurations are assumed. Simulation results show where bubbles are generated, the nonlinear effects they have on ultrasound, and where they are relocated. Despite many physical restrictions and thanks to its particularities (two nonlinear coupled fields, bubble generation, bubble motion), the numerical model used in this work gives results that show qualitative coherence with data observed experimentally in the framework of stable cavitation and suggest their usefulness in some application contexts.     

声驻波场中空化泡的动力学特性

以水为工作介质, 考虑了液体的可压缩性, 研究了驻波声场中空化泡的运动特性, 模拟了驻波场中各位置处空化泡的运动状态以及相关参数对各位置处空化泡在主Bjerknes力作用下运动方向的影响. 结果表明: 驻波声场中, 空化泡的运动状态分为三个区域, 即在声压波腹附近空化泡做稳态空化, 在偏离波腹处空化泡做瞬态空化, 在声压波节附近, 空化泡在主Bjerknes 力作用下, 一直向声压波节处移动, 显示不发生空化现象; 驻波场中声压幅值增加有利于空化的发生, 但声压幅值增加到一定上限时, 压力波腹区域将排斥空化泡, 并驱赶空化泡向压力波节移动, 不利于空化现象的发生; 当声频率小于初始空化泡的共振频率时, 声频率越高, 由于主Bjerknes 力的作用将有更多的空化泡向声压波节移动, 不利于空化的发生, 尤其是驻波场液面的高度不应是声波波长的1/4; 当声频率一定时, 空化泡初始半径越大越有利于空化现象的发生, 但当空化泡的初始半径超过声频率的共振半径时, 由于主Bjerknes力的作用将有更多的空化泡向声压波节移动, 不利于空化的发生.     

A review of effects and applications of ultrasound in mineral flotation

Ultrasound technology is widely applied in the flotation process. From the perspective of the theory of ultrasound, this article explains the effects and applications of ultrasound in the flotation process. To obtain a clear understanding of ultrasonic effects, we observe the phenomena of ultrasound using a high-speed camera and a CCD camera, and investigate potential applications in flotation. From these different phenomena, the ultrasonic effects are classified into three types of effect: the transient cavitation effect, stable cavitation effect, and acoustic radiation force effect. Based on these effects, the applications of ultrasound to mineral flotation are reviewed, including slime coating removal, oxidation film removal, desulfuration, tiny bubble generation, flotation reagent dispersion, and aggregation. In addition, the ultrasonic equipment and treatment methods applied in flotation are classified and compared based on their characteristics. Finally, we propose some potential directions in the study of the stable cavitation effect and acoustic radiation force effect, which are important, but are seldom mentioned in previous reports.     

声场中气泡运动的混沌特性

以水为工作介质,考虑了液体的可压缩性,研究了声场中气泡的运动特性,模拟了声波频率、声压幅值、气泡初始半径以及液体的表面张力和黏滞系数的变化对气泡运动状态的影响. 分析了空化处理效果与气泡运动状态之间关系. 结果表明:气泡运动处于混沌状态,是提高声空化降解有机污染物能力的最重要因素. 关键词： 声空化 混沌 相图 功率谱图     

亚临界水中超声激励空化泡动力学分析

考察亚临界水中压力和温度对超声空化泡动力学的影响。应用非线性Rayleigh-Plesset方程模拟空化泡运动过程,并利用Matlab软件编程求数值解,用碘量法测定超声在亚临界水中的声空化产额。结果表明:当亚临界水的压力相似文献   

Radial oscillation and translational motion of a gas bubble in a micro-cavity

According to classical nucleation theory, a gas nucleus can grow into a cavitation bubble when the ambient pressure is negative. Here, the growth process of a gas nucleus in a micro-cavity was simplified to two “events”, and the full confinement effect of the surrounding medium of the cavity was considered by including the bulk modulus in the equation of state. The Rayleigh–Plesset-like equation of the cavitation bubble in the cavity was derived to model the radial oscillation and translational motion of the cavitation bubble in the local acoustic field. The numerical results show that the nucleation time of the cavitation bubble is sensitive to the initial position of the gas nucleus. The cavity size affects the duration of the radial oscillation of the cavitation bubble, where the duration is shorter for smaller cavities. The equilibrium radius of a cavitation bubble grown from a gas nucleus increases with increasing size of the cavity. There are two possible types of translational motion: reciprocal motion around the center of the cavity and motion toward the cavity wall. The growth process of gas nuclei into cavitation bubbles is also dependent on the compressibility of the surrounding medium and the magnitude of the negative pressure. Therefore, gas nuclei in a liquid cavity can be excited by acoustic waves to form cavitation bubbles, and the translational motion of the cavitation bubbles can be easily observed owing to the confining influence of the medium outside the cavity.     

Oscillation and Migration of Bubbles within Ultrasonic Field

The oscillation and migration of bubbles within an intensive ultrasonic field are important issues concerning acoustic cavitation in liquids.We establish a selection map of bubble oscillation mode related to initial bubble radius and driving sound pressure under 20 kHz ultrasound and analyze the individual-bubble migration induced by the combined effects of pressure gradient and acoustic streaming.Our results indicate that the pressure threshold of stable and transient cavitation decreases with the increasing initial bubble radius.At the pressure antinode,the Bjerknes force dominates the bubble migration, resulting in the large bubbles gathering toward antinode center,whereas small bubbles escape from antinode.By contrast,at the pressure node,the bubble migration is primarily controlled by acoustic streaming,which effectively weakens the bubble adhesion on the container walls,thereby enhancing the cavitation effect in the whole liquid.     

Hydrodynamic cavitation for sonochemical effects

A comparative study of hydrodynamic and acoustic cavitation has been made on the basis of numerical solutions of the Rayleigh-Plesset equation. The bubble/cavity behaviour has been studied under both acoustic and hydrodynamic cavitation conditions. The effect of varying pressure fields on the collapse of the cavity (sinusoidal for acoustic and linear for hydrodynamic) and also on the latter's dynamic behaviour has been studied. The variations of parameters such as initial cavity size, intensity of the acoustic field and irradiation frequency in the case of acoustic cavitation, and initial cavity size, final recovery pressure and time for pressure recovery in the case of hydrodynamic cavitation, have been found to have significant effects on cavity/bubble dynamics. The simulations reveal that the bubble/cavity collapsing behaviour in the case of hydrodynamic cavitation is accompanied by a large number of pressure pulses of relatively smaller magnitude, compared with just one or two pulses under acoustic cavitation. It has been shown that hydrodynamic cavitation offers greater control over operating parameters and the resultant cavitation intensity. Finally, a brief summary of the experimental results on the oxidation of aqueous KI solution with a hydrodynamic cavitation set-up is given which supports the conclusion of this numerical study. The methodology presented allows one to manipulate and optimise of specific process, either physical or chemical.     

Effects of medium viscoelasticity on bubble collapse strength of interacting polydisperse bubbles

Due to its physical and/or chemical effects, acoustic cavitation plays a crucial role in various emerging applications ranging from advanced materials to biomedicine. The cavitation bubbles usually undergo oscillatory dynamics and violent collapse within a viscoelastic medium, which are closely related to the cavitation-associated effects. However, the role of medium viscoelasticity on the cavitation dynamics has received little attention, especially for the bubble collapse strength during multi-bubble cavitation with the complex interactions between size polydisperse bubbles. In this study, modified Gilmore equations accounting for inter-bubble interactions were coupled with the Zener viscoelastic model to simulate the dynamics of multi-bubble cavitation in viscoelastic media. Results showed that the cavitation dynamics (e.g., acoustic resonant response, nonlinear oscillation behavior and bubble collapse strength) of differently-sized bubbles depend differently on the medium viscoelasticity and each bubble is affected by its neighboring bubbles to a different degree. More specifically, increasing medium viscosity drastically dampens the bubble dynamics and weakens the bubble collapse strength, while medium elasticity mainly affects the bubble resonance at which the bubble collapse strength is maximum. Differently-sized bubbles can achieve resonances and even subharmonic resonances at high driving acoustic pressures as the elasticity changes to certain values, and the resonance frequency of each bubble increases with the elasticity increasing. For the interactions between the size polydisperse bubbles, it indicated that the largest bubble generally has a dominant effect on the dynamics of smaller ones while in turn it is almost unaffected, exhibiting a pattern of destructive and constructive interactions. This study provides a valuable insight into the acoustic cavitation dynamics of multiple interacting polydisperse bubbles in viscoelastic media, which may offer a potential of controlling the medium viscoelasticity to appropriately manipulate the dynamics of multi-bubble cavitation for achieving proper cavitation effects according to the desired application.     

球状泡群内气泡的耦合振动

振动气泡形成辐射场影响其他气泡的运动, 故多气泡体系中气泡处于耦合振动状态. 本文在气泡群振动模型的基础上, 考虑气泡间耦合振动的影响, 得到了均匀球状泡群内振动气泡的动力学方程, 以此为基础分析了气泡的非线性声响应特征. 气泡间的耦合振动增加了系统对每个气泡的约束, 降低了气泡的自然共振频率, 增强了气泡的非线性声响应. 随着气泡数密度的增加, 振动气泡受到的抑制增强; 增加液体静压力同样可抑制泡群内气泡的振动, 且存在静压力敏感区(1–2 atm, 1 atm=1.01325×10⁵ Pa); 驱动声波对气泡振动影响很大, 随着声波频率的增加, 能够形成空化影响的气泡尺度范围变窄. 在同样的声条件、泡群尺寸以及气泡内外环境下, 初始半径小于5 μm 的气泡具有较强的声响应. 气泡耦合振动会削弱单个气泡的空化影响, 但可延长多气泡系统空化泡崩溃发生的时间间隔和增大作用范围, 整体空化效应增强.     

Numerical investigation on acoustic cavitation characteristics of an air-vapor bubble: Effect of equation of state for interior gases

The cavitation dynamics of an air-vapor mixture bubble with ultrasonic excitation can be greatly affected by the equation of state (EOS) for the interior gases. To simulate the cavitation dynamics, the Gilmore-Akulichev equation was coupled with the Peng–Robinson (PR) EOS or the Van der Waals (vdW) EOS. In this study, the thermodynamic properties of air and water vapor predicted by the PR and vdW EOS were first compared, and the results showed that the PR EOS gives a more accurate estimation of the gases within the bubble due to the less deviation from the experimental values. Moreover, the acoustic cavitation characteristics predicted by the Gilmore-PR model were compared to the Gilmore-vdW model, including the bubble collapse strength, the temperature, pressure and number of water molecules within the bubble. The results indicated that a stronger bubble collapse was predicted by the Gilmore-PR model rather than the Gilmore-vdW model, with higher temperature and pressure, as well as more water molecules within the collapsing bubble. More importantly, it was found that the differences between both models increase at higher ultrasound amplitudes or lower ultrasound frequencies while decreasing as the initial bubble radius and the liquid parameters (e.g., surface tension, viscosity and temperature of the surrounding liquid) increase. This study might offer important insights into the effects of the EOS for interior gases on the cavitation bubble dynamics and the resultant acoustic cavitation-associated effects, contributing to further optimization of its applications in sonochemistry and biomedicine.     

Effects of surface tension on the dynamics of a single micro bubble near a rigid wall in an ultrasonic field

Acoustic cavitation is a very important hydrodynamic phenomenon, and is often implicated in a myriad of industrial, medical, and daily living applications. In these applications, the effect mechanism of liquid surface tension on improving the efficiency of acoustic cavitation is a crucial concern for researchers. In this study, the effects of liquid surface tension on the dynamics of an ultrasonic driven bubble near a rigid wall, which could be the main mechanism of efficiency improvement in the applications of acoustic cavitation, were investigated at the microscale level. A synchronous high-speed microscopic imaging method was used to clearly record the temporary evolution of single acoustic cavitation bubble in the liquids with different surface tension. Meanwhile, the bubble dynamic characteristics, such as the position and time of bubble collapse, the size and stability of the bubbles, the speed of bubble boundaries and the micro-jets, were analyzed and compared. In the case of the single bubbles near a rigid wall, it was found that low surface tension reduces the stability of the bubbles in the liquid medium. Meanwhile, the bubbles collapse earlier and farther from the rigid wall in the liquids with lower surface tension. In addition, the surface tension has no significant influence on the speed of the first micro-jet, but it can substantially increase the speed of second and the third micro-jets after the first collapse of the bubble. These effects of liquid surface tension on the bubble dynamics can explain the mechanism of surfactants in numerous fields of acoustic cavitation for facilitating its optimization and application.     

Theoretical estimation of sonochemical yield in bubble cluster in acoustic field

In order to learn more about the physical phenomena occurring in cloud cavitation, the nonlinear dynamics of a spherical cluster of cavitation bubbles and cavitation bubbles in cluster in an acoustic field excited by a square pressure wave are numerically investigated by considering viscosity, surface tension, and the weak compressibility of the liquid.The theoretical prediction of the yield of oxidants produced inside bubbles during the strong collapse stage of cavitation bubbles is also investigated. The effects of acoustic frequency, acoustic pressure amplitude, and the number of bubbles in cluster on bubble temperature and the quantity of oxidants produced inside bubbles are analyzed. The results show that the change of acoustic frequency, acoustic pressure amplitude, and the number of bubbles in cluster have an effect not only on temperature and the quantity of oxidants inside the bubble, but also on the degradation types of pollutants, which provides a guidance in improving the sonochemical degradation of organic pollutants.     

Bubble population phenomena in acoustic cavitation

Theoretical treatments of the dynamics of a single bubble in a pressure field have been undertaken for many decades. Although there is still scope for progress, there now exists a solid theoretical basis for the dynamics of a single bubble. This has enabled useful classifications to be established, including the distinction between stable cavitation (where a bubble pulsates for many cycles) and transient cavitation (where the bubble grows extensively over time-scales of the order of the acoustic cycle, and then undergoes an energetic collapse and subsequent rebound and then, potentially, either fragmentation, decaying oscillation or a repeat performance). Departures from sphericity, such as shape and surface oscillations and jetting, have also been characterized. However, in most practical systems involving high-energy cavitation (such as those involving sonochemical, biological and erosive effects), the bubbles do not behave as the isolated entities modelled by this single-bubble theory: the cavitational effect may be dominated by the characteristics of the entire bubble population, which may influence, and be influenced by, the sound field.

The well established concepts that have resulted from the single-bubble theory must be reinterpreted in teh light of the bubble population, an appreciation of population mechanisms being necessary to apply our understanding of single-bubble theory to many practical applications of ‘power’ ultrasound. Even at a most basic level these single-bubble theories describe the response of the bubble to the local sound field at the position of the bubble, and that pressure field will be influenced by the way sound is scattered by neighbouring bubbles. The influence of the bubble population will often go further, a non-uniform sound field creating an inhomogeneous bubble distribution. Such a distribution can scatter, channel and focus ultrasonic beams, can acoustically shield regions of the sample, and elsewhere localize the cavitational activity to discrete ‘hot spots’. As a result, portions of the sample may undergo intense sonochemical activity, degassing, erosion, etc., whilst other areas remain relatively unaffected. Techniques exist to control such situations where they are desirable, and to eliminate this localization where a more uniform treatment of the sample is desired.     

Spectrum of acoustic radiation caused by cavitation: Analytical model

Nonlinear dynamics of bubbles in liquid in the presence of the resonance and noise acoustic fields is analyzed. The effect of fluctuations associated with the random field component is found to be most pronounced in the vicinity of the bifurcation values of the field amplitude and detuning, these values corresponding to changes in the number of stable oscillatory states of a bubble. The radiation spectrum of a single bubble in the vicinity of the fundamental resonance is determined. In the framework of the proposed model, a comparison of this spectrum with the real spectrum of acoustic radiation caused by cavitation is performed.     

Experimental investigation of conical bubble structure and acoustic flow structure in ultrasonic field

The objective of this paper is to investigate the transient conical bubble structure (CBS) and acoustic flow structure in ultrasonic field. In the experiment, the high-speed video and particle image velocimetry (PIV) techniques are used to measure the acoustic cavitation patterns, as well as the flow velocity and vorticity fields. Results are presented for a high power ultrasound with a frequency of 18 kHz, and the range of the input power is from 50 W to 250 W. The results of the experiment show the input power significantly affects the structures of CBS, with the increase of input power, the cavity region of CBS and the velocity of bubbles increase evidently. For the transient motion of bubbles on radiating surface, two different types could be classified, namely the formation, aggregation and coalescence of cavitation bubbles, and the aggregation, shrink, expansion and collapse of bubble cluster. Furthermore, the thickness of turbulent boundary layer near the sonotrode region is found to be much thicker, and the turbulent intensities are much higher for relatively higher input power. The vorticity distribution is prominently affected by the spatial position and input power.