Bis(silyl)chelat-Komplexe des Eisens

The reaction of Fe₂(CO)₉ with 1,2-bis(dimethylsilyl)benzene, 1,2,4,5-tetrakis(dimethylsilyl)benzene and vic-tetrakis(dimethylsilyl)benzene affords bis(silyl)chelate complexes of iron.     

Crystal structure and DFT calculations of Cp2NbH(SiIMe2)(SiFMe2): an asymmetric bis(silyl) niobocene hydride complex

An asymmetric bis(silyl) niobocene hydride complex, namely, bis(η⁵-cyclopentadienyl)(fluorodimethylsilyl)hydrido(iododimethylsilyl)niobium, [Nb(C₅H₅)₂(C₂H₆FSi)(C₂H₆ISi)H] or Cp₂NbH(SiIMe₂)(SiFMe₂), has been studied to determine the effect of the silyl ligand on the position of the hydride attached to the Nb atom. It has been shown that when a Group 17 atom is substituted onto one of the silyl ligands, there is a greater interaction between the hydride and this ligand, as demonstrated by a shorter Si…H distance. In the present work, we have investigated the effect when the silyl ligands are substituted by different Group 17 atoms. We present here the structure and DFT calculations of Cp₂NbH(SiIMe₂)(SiFMe₂), showing that the position of the hydride is located between the two silyl ligands. The results from our investigation show that the hydride is closer to the silyl ligand that is substituted by fluorine.     

Bis(tetraphenylantimony) succinate,malate, and tartrate: Syntheses and structures

The reactions of pentaphenylantimony with succinic, malic, and tartaric acids (mole ratio 2: 1) in toluene afford bis(tetraphenylantimony) succinate (I), malate (II), and tartrate (III) in yields of 98, 92, and 94%, respectively. According to the X_ray diffraction analysis results, molecules I and II are centrosymmetric. In compound II, the hydroxy group in the acid residue is disordered over two positions. Crystal III includes two types of crystallographically independent molecules (a and b). The antimony atoms in compounds I, II, IIIa, and IIIb have distorted trigonal bipyramidal coordination modes. The axial angles C_axSbO_ax are 166.80(8)° (I); 174.8(2)° (II); 176.4(4)°, 177.4(3)° (IIIa); and 173.3(4)°, 172.7(4)° (IIIb). The equatorial angles C_eqSbC_eq vary in the ranges 99.3(1)°–154.5(1)° (I); 115.2(2)°–123.3(2)° (II); 115.7(4)°–123.3(4)° 115.2(5)°–125.6(5)° (IIIa); and 107.9(4)°-129.1(4)°, 113.7(4)°-124.8(5)° (IIIb). The Sb-C and Sb-O bonds are 2.138(3)-2.176(3), 2.319(2) Å (I); 2.111(6)–2.163(5), 2.243(4) Å (II); 2.072(13)–2.169(11), 2.252(7), 2.284(7) Å (IIIa); and 2.047(11)–2.190(11), 2.224(7), 2.256(7) Å (IIIb). The intramolecular distances Sb…O=C are 2.528(3) (I); 3.267(7) (II); 3.381(7), 3.436(7) (IIIa); and 3.351(7), 3.162(7) Å (IIIb). For structures I, II, and III, the CIF files are CCDC 929151, 941542, and 941543, respectively.     

Synthese von Mono- und Bis(silyl)hydroxylaminen

Synthesis of Mono- and Bis(silyl)hydroxylamines Silylamines reacts with hydroxylaminehydrochlorid to give the monosilylhydroxylamines: R₂FSiONH₂ (R = CMe₃ 1 ), R₂R′SiONH₂ (R = CMe₃, R′ = Me 2 ), R₂(NH₂)SiONH₂ (R = CMe₃ 3 ). The reaction of 1 in the present of HCl-acceptors or the reaction of lithiated 1 with Me₃SiCl or F₂Si(CMe₃)₂ leads to the formation of bis(silyl)hydroxylamines, (Me₃C)₂FSiONHSiMe₃ 4 , and (Me₃C)₂FSiONHSiF(CMe₃)₂ 5 . The lithium derivatives of Me₃SiONH₂ and 2 react with fluorosilanes to the bis(silyl)hydroxylamines: Me₃SiONHSiFRR′ (R = R′ = CMe₃, 6 , R = CMe₃, R′ = F 7 , R = R′ = NMeSiMe₃ 8 ), (Me₃C)₂MeSiNHOSiFRR′ (R = CMe₃, R′ = F 9 , R = (Me₃C)₃C₆H₂, R′ = F 10 , R = R′ = CMe₃ 11 , R = R′ = CHMe₂ 12 ). The bis(silyl)hydroxylamines 4 and 6 are structure isomers.     

双(三苯基锗)不饱和烃基膦酸酯的合成

随着倍半氧锗类化合物的合成及应用研究的日益广泛,含Ge-O键的烃基锗衍生物的合成及应用研究也逐渐引起了人们的关注,相继合成了各种类型具有抗癌活性的含Ge-O键的烃基锗类化合物[1～3].但烃基锗膦酸衍生物的合成及应用研究尚未见文献报道.为了探讨该类化合物的结构及生物活性,本文以三苯基氯化锗和烯(炔)基膦酸钠为原料,合成了8种双(三苯基锗)不饱和烃基膦酸酯.……     

Syntheses and Diel-Alder Reactions of Bis(Alkylidene)Cyclohexanes

Substituted cyclohexene-fused 3-sulfolenes have been prepared by the direct deprotonation/alkylation reactions of a readily available starting material. These fused 3-sulfolenes undergo inter- and intramolecular Diels-Alder reactions at high temperatures to give properly substituted bi- and tricyclic molecules.     

Syntheses and crystal structures of azafulleroid and aziridinofullerene bearing silyl or germyl benzene

Addition of silyl and germylmethyl azides (1) to fullerene C₆₀ at 50 °C through [2+3] cycloaddition led to the formation of the triazoline adducts (2). Subsequently, heating 2 at 100 °C in the solid state, caused N₂ extrusion producing two different isomers, [5,6]-azafulleroid (3) and [6,6]-aziridinofullerene (4). The ¹³C NMR spectrum of 3 had an absence of resonances in the aliphatic region for the fullerene C₆₀ cage, showing a fulleroid with C_S symmetry. In contrast, 4 exhibited one sp³ resonance in the aliphatic region for the fullerene C₆₀ cage, indicative of an aziridinofullerene with C_2V symmetry. However, MALDI-TOF mass characterization was hampered because ion peaks corresponding to the bis-adduct are detected in positive ion mode measurements, whereas the ion peaks [M−N₂]⁻ for 2a as well as [M]⁻ for 3a and 4a are observed in negative ion measurements. In an effort to obtain X-ray data, silyl and germylphenyl groups were introduced to form intermolecular complexes with fullerene C₆₀. The X-ray structures of 3c and 3d revealed a strong enhancement of homoconjugation in the bridged annulene moiety based on POAV analysis. The X-ray structures of 3c,d and 4c were confirmed with the detection of silyl and germylphenyl-C₆₀ interactions, similar to dimethoxyphenyl-C₆₀ interactions.     

Syntheses and Structures of Zinc Bis(phosphinimino)methanide Complexes

Reactions of bis(phosphinimino)methanes H₂C(PPh₂NR)₂ [R = SiMe₃ (L¹H), Ph (L²H), 2,6‐iPr₂‐C₆H₃ (DIPP) (L³H)] with ZnR₂ (R = Me, Et) yielded the corresponding bis(phosphinimino)methanide zinc complexes LZnMe [L² ( 1 ), L³ ( 2 )] and LZnEt [L¹ ( 3 ), L² ( 4 ), and L³ ( 5 )]. Complexes 1 – 5 were characterized by heteronuclear NMR (¹H, ¹³C, ³¹P) and IR spectroscopy, elemental analysis, and single‐crystal X‐ray diffraction.     

桥联双（甲巯咪唑）化合物的合成和配位性能

研究了桥联双(甲巯咪唑)化合物(Ⅰ_a—Ⅳ_a、Ⅰ_b)的合成和配位性能。UV谱显示Ⅰ_a—Ⅳ_a与UO_2~(2+)离子(硬酸)配位,溶液中形成3:1的配合物。Ⅰ_b与Hg~(2+)、Au~(3+)离子(软酸)配位形成2:1的配合物,用CNDO/2方法计算了各配体分子中原子净电荷密度和HOMO、LUMO能量。     

Bis(diisopropylphosphino)pyridine iron dicarbonyl, dihydride, and silyl hydride complexes

Treatment of the bis(diisopropylphosphino)pyridine iron dichloride, ((iPr)PNP)FeCl2 ((iPr)PNP = 2,6-(iPr2PCH2)2(C5H3N)), with 2 equiv of NaBEt3H under an atmosphere of dinitrogen furnished the diamagnetic iron(II) dihydride dinitrogen complex, ((iPr)PNP)FeH2(N2). Addition of 1 equiv of PhSiH3 to ((iPr)PNP)FeH2(N2) resulted in exclusive substitution of the hydride trans to the pyridine to yield the silyl hydride dinitrogen compound, ((iPr)PNP)FeH(SiH2Ph)N2, which has been characterized by X-ray diffraction. The solid-state structure established a distorted octahedral geometry where the hydride ligand distorts toward the iron silyl. Both ((iPr)PNP)FeH2(N2) and ((iPr)PNP)FeH(SiH2Ph)N2 form eta2-dihydrogen complexes upon exposure to H2. The iron hydrides and the eta2-H2 ligands are in rapid exchange in solution, consistent with the previously reported "cis" effect, arising from a dipole/induced dipole interaction between the two ligands. Taken together, the spectroscopic, structural, and reactivity studies highlight the relative electron-donating ability of this pincer ligand as compared to the redox-active aryl-substituted bis(imino)pyridines.     

New ferrocene-containing structures: Poly(silyl ester)s

Two new polymeric structures containing ferrocene units along the chains, namely poly(silyl ester)s, have been synthesized and characterized: a geminal poly(silyl ester) (g-PSE) and one having a disiloxane spacer between the silyl ester groups (s-PSE). The condensation polymerization of AA/BB monomer systems in solution was used in both cases as preparation method involving a silicon-containing diol, (diphenylsilane diol or 1,3-bis(hydroxy)-tetramethyldisiloxane), and 1,1′-di(chlorocarbonyl)ferrocene. The polymers were investigated by differential pulse voltammetry in order to evaluate the redox behavior. Due to the presence of the silyl ester groups in the chain, these polymers are hydrolytically degradable.     

Synthesis,Structural Characterization and Reactivity of a Bis(phosphine)(silyl) Platinum(II) Complex

Treatment of 1,2‐C₆H₄(SiH₃)(SiH₃) ( 1 ) with Pt(dmpe)(PEt₃)₂ (dmpe=Me₂PCH₂CH₂PMe₂) in the ratio of 1:1 leads to the complex {1,2‐C₆H₄(SiH₂)(SiH₂)}Pt^II (dmpe) ( 2 ), which can react with proton organic reagent bearing hydroxy group with low steric hindrance to form a tetra‐alkoxy substituted silyl platinum(II) compound ( 3 ). Compounds 2 and 3 are the very rare examples of silyl transition‐metal complexes derived from this chelating hydrosilane ligand. To the best of our knowledge, there are only 6 examples of silyl metal complexes prepared from this ligand with such structural features registered in the Cambridge Structural Database, among them, only one silyl platinum(II) compound is presented. The structures of complexes 2 and 3 were unambiguously determined by multinuclear NMR spectroscopic studies and single crystal X‐ray analysis.     

Syntheses and Characterization of Ten-Membered Cyclic and Large Bite Acyclic Bis(phosphines)

Reaction of bis(dichlorophosphino)aniline with CH 2 bridged bis(phenols) or substituted diamine gives the 10-membered heterocyclic phosphorochloridities in quantitative yield. The bis(phenols) also react with chlorodiphenylphosphine to afford the bulky acyclic bis(phosphinites).     

Bis{[diphenyl(piperidinomethyl)silyl]methyl}cadmium and ‐magnesium

The homoleptic and monomeric metal alkyls bis{[di­phenyl(piperidino­methyl)­silyl]­methyl}cadmium, [Cd(C₁₉H₂₄­NSi)₂] or [Cd{CH₂SiPh₂(CH₂NC₅H₁₀)}₂], (I), and bis{[di­phenyl­(piperidino­methyl)­silyl]­methyl}magnesium, [Mg(C₁₉H₂₄NSi)₂] or [Mg{CH₂SiPh₂(CH₂NC₅H₁₀)}₂], (II), (CH₂NC₅H₁₀ is piperidino­methyl) are isostructural, and the mol­ecules exhibit crystallographically imposed C₂ symmetry. The metal centres are located on special positions and, for each structure, half of the mol­ecule is located in the asymmetric unit. The metal centres are intramolecularly coordinated and stabilized by two piperidino­methyl groups (side‐arm donation). The Si—C and M—C bonds (M is Cd or Mg) are shortened compared with the corresponding non‐metallated compounds, indicating stabilization by the diffuse polarizable Si centres (α effect). The C—M—C angle is 140.53 (12)° in (I) and 123.39 (11)° in (II).     

New lanthanide(III) disiloxanediolates: Syntheses and structures

Three new chloro-functionalized lanthanide(III) bis(disiloxanediolate) complexes, [{(Ph₂SiO)₂O}₂{Li(DME)}₂]Nd(DME)Cl (3), [{(Ph₂SiO)₂O}₂{Li(THF)₂}₂]HoCl·2THF (4), and [{(Ph₂SiO)₂O}₂{Li(THF)₂}₂]ErCl·2THF (5) have been prepared by the treatment of anhydrous lanthanide trichlorides, LnCl₃ (Ln = Nd, Ho, Er), with two equivalents of in situ prepared (Ph₂SiOLi)₂O (2). In a similar manner, the treatment of PrCl₃ with 2 equivalents of (Ph₂SiOLi)₂O (2) in the presence of LiN(SiMe₃)₂ afforded the silylamide-functionalized derivative [{(Ph₂SiO)₂O}₂{Li(THF)₂}₂]Pr[N(SiMe₃)₂] (6). All new compounds have been structurally characterized by X-ray diffraction analyses. Compounds 4 and 5 represent a new intermediate structural type of lanthanide bis(disiloxanediolates) between the “inorganic metallocenes” (Pr, Nd, Sm) and the “metallacrowns” (Sc, Y).     

Syntheses,Spectroscopic, Structural,Fluorescent and Thermal Properties of Bis(saccharinato)copper(II) Complexes with two Bis(pyridylamine) Ligands

Two new copper(II) complexes of saccharinate (sac) with bis(2‐pyridylmethyl)amine (bpma) and N,N′‐bis[1‐(pyridin‐2‐yl)ethylidene]ethane‐1,2‐diamine (bapen), [Cu(bpma)(sac)₂] · H₂O ( 1 ) and [Cu(bapen)(sac)₂] ( 2 ), were synthesized and characterized by elemental analysis, TG‐DTA, X‐ray diffraction, and UV/Vis and IR spectroscopy, respectively. In 1 , the copper(II) ion is coordinated by two N‐bonded sac ligands, and three nitrogen atoms of bpma, in a distorted square‐pyramidal coordination arrangement, whereas the arrangement around the copper ion in 2 is a distorted octahedron with two N‐coordinated sac ligands and a tetradentate bapen ligand. In addition to hydrogen bonding involving the water molecule in 1 , the mononuclear species of 1 and 2 are further connected by weak intermolecular C–H ··· π and C–H ··· O interactions to form a three‐dimensional network. Both complexes are luminescent at room temperature and their emissions seem to be due to ligand‐based π–π* transitions.     

Enantiospecific Syntheses of Congested Atropisomers through Chiral Bis(aryne) Synthetic Equivalents

The synthetic equivalents of the enantiopure binaphthyl bis(aryne) atropisomers derived from BINOL (1,1′-bi-2,2′-naphtol) featuring a stereogenic axis vicinal to the two reactive triple bonds can be generated for the first time in solution in an enantiospecific manner. Using a two-step sequence based on the bidirectional [4+2] cycloaddition of furan derivatives followed by an aromatizative deoxygenation reaction, several 9,9’-bianthracenyl-based atropisomers could be prepared enantiospecifically in high enantiomeric purity. Alternatively, bidirectional reactions with anthracene, 2-bromostyrene, and perylene as the arynophiles afforded very congested bis(benzotriptycene), bis(tetraphene) and bis(anthra[1,2,3,4-ghi]perylene) nanocarbon atropisomers in equally high enantiomeric purity. In complement, cross reactions with two different arynophiles revealed possible. The unusual atropisomer prototypes described in this study open the way to enantiopure nanographene atropisomers designed for functions.     

O-(2-氰乙基)溴代苯甲酰二茂铁肟的合成和结构

用苯甲酰(或溴代苯甲酰)二茂铁肟与丙烯腈进行氰乙基化反应, 得到三种新的二茂铁衍生物(含一种肟)。对它们进行了元素分析、IR、^1H NMR谱表征, 并测定了两种化合物的分子和晶体结构。