Synthesis of lead magnesium niobate and La-modified lead magnesium niobate using different Mg precursors

Summary In the present study, the effect of the partial replacement of Pb²⁺ by La³⁺ in the lead magnesium niobate Pb(Mg_1/3Nb_2/3)O₃ (PMN) perovskite structure was examined, taking into account the Mg-source. Pure lead magnesium niobate (PMN) and lanthanum-modified lead magnesium niobate (PLMN) having composition (Pb_1-xLa_x) (Mg_1+x/3Nb_2-x/3)O₃ with x=0.2 were elaborated. The phase formation was investigated by DTA/TG methods correlated with X-ray diffraction, performed on materials obtained in non-isothermal conditions. The diffraction data for the ceramics obtained by isothermal treatments emphasized the influence of the lanthanum on the crystal structure, inducing the doubling of the unit cell parameter. SEM investigations pointed out the lanthanum inhibitor effect on the grain growth process, leading to an uniform grain distribution.     

原位制备钛酸锶钡/铌酸锶钡复相陶瓷的研究

0引言驰豫型铁电陶瓷是近年来广泛研究和迅速发展的一种新型功能陶瓷[1]。通过把具有不同相变温度的驰豫型铁电体层层叠加,可以获得具有稳定的介电常数鄄温度关系的复合材料[2]。钛酸锶钡Ba1-xSrxTiO3和铌酸锶钡SrxBa1-xNb2O6都是重要的驰豫型铁电体,并且其居里温度均随Ba/Sr比     

Investigation of s, p, d-element Niobates and Their Solid Solution Formation Processes by Thermal Analysis

The binary and ternary systems M'O(M'CO₃)-Nb₂O₅ and M'O(M'CO₃)-MO-Nb₂O₅, where M'=Ca,Sr and Ba and M=Cu, Ni, Cd, Zn and Pb, were investigated by means of thermal analysis in the temperature range 20–1500°C. The boundaries of stability of the solid solutions Sr_2−xMe_xNb₂O₇,Sr_2−xM_xNb₂O₇, Sr_4−xM_xNb₂O₉ and Sr_6−xM_xNb₂O₁₁ were determined by means of X-ray diffraction, and IR and Raman spectroscopy. The possibility of prognostication of the phase fields of stable solid solutions by calculation from the diagrams of the ‘comparative electronegativity of atoms vs. tolerance factor’ was demonstrated. The kinetic parameters of the interactions in theSrCO₃+MO+Nb₂O₅ powder mixtures were established. This revised version was published online in August 2006 with corrections to the Cover Date.     

Specific heat on Sr<Subscript>2</Subscript>Nb<Subscript>2</Subscript>O<Subscript>7</Subscript> and Sr<Subscript>2</Subscript>Ta<Subscript>2</Subscript>O<Subscript>7</Subscript>

Summary Specific heats on the single crystals of Sr₂Nb₂O₇, Sr₂Ta₂O₇ and (Sr_1-xBa_x)₂Nb₂O₇ were measured in a wide temperature range of 2-600 K. Heat anomalies of a λ-type were observed at the incommensurate phase transition of T_INC (=495 K) on Sr₂Nb₂O₇ and at the super-lattice phase transition of T_SL (=443 K) on Sr₂Ta₂O₇; the transition enthalpies and the transition entropies were estimated. Furthermore, a small heat anomaly was observed at the low temperature ferroelectric phase transition of T_LOW (=95 K) on Sr₂Nb₂O₇. The transition temperature T_LOW decreases with increasing Ba content x and it vanishes for samples of x>2%.     

B<Subscript>2</Subscript>O<Subscript>3</Subscript> additives on sintering and microwave dielectric behaviors of Mg<Subscript>4</Subscript>Nb<Subscript>2</Subscript>O<Subscript>9</Subscript> ceramics synthesized through the aqueous sol–gel Process

The relationships between the sintering temperatures and the microwave dielectric properties of (1−x)Mg₄Nb₂O₉-xB₂O₃ (x = 0.5–10 wt. %) compounds were investigated by the sol–gel method in order to reduce the sintering temperature in this study. A suitable amount of B₂O₃ doping was effective in allowing low sintering temperatures without a little detrimental effect on these dielectric properties of the Mg₄Nb₂O₉ compounds. The variations in the dielectric constant (ε _r ) and the quality factor (Q·f) of the Mg₄Nb₂O₉ compounds depended on the amount of B₂O₃ doping and the sintering temperature. As a result, a ε _r value of ~12.8 and a Q·f value of ~142,570 GHz were obtained when the Mg₄Nb₂O₉ compound with x = 3% was sintered at 1,200 °C for 4 h. The temperature coefficient of resonant frequency (τ _f ) of the 3%-B₂O₃ doping Mg₄Nb₂O₉ compound slightly changed from −33 to −48 ppm/°C with an increased sintering temperature.     

Chemical Processing of Potassium Substituted (Pb0.6Ba0.4)Nb2O6 Powders and Thin Films Through Metallo-Organics

Highly oriented tungsten bronze K_0.4(Pb_0.6Ba_0.4)_0.8Nb₂O₆ ferroelectric thin films have been prepared from metal alkoxides and metal acetate by chemical process. The formation of solid solution with potassium was found to be very effective to form the tungsten bronze phase at lower temperatures compared with (Pb_0.6Ba_0.4)Nb₂O₆. The amount of potassium in the composition of K_x(Pb_0.6Ba_0.4)_{1 – x/2}Nb₂O₆ [0 x 0.4] is also important to crystallize in the tungsten bronze phase. K_0.4(Pb_0.6Ba_0.4)_0.8Nb₂O₆ films with c-axis preferred orientation were successfully synthesized on MgO(1 0 0) and Pt(1 0 0)/MgO(1 0 0) substrates above 700°C. KPBN60 thin film on Pt(1 0 0)/MgO(1 0 0) showed a remnant polarization of 20 C/cm² and a coercive field of 140 kV/cm at –150°C.     

Structure and properties of (1−x)(0.6Pb(Zn1/3Nb2/3)O3-0.4Pb (Mg1/3Nb2/3)O3)-xPbTiO3 thin films with perovskite phase promoted by polyethylene glycol

The preferential formation of a pyrochlore structure is a knotty problem in the preparation of Pb(Zn_1/3Nb_2/3)O₃ (PZN)-based thin film materials and its presence is significantly detrimental to the dielectric and piezoelectric properties. In this study, 40 mol% of PZN was replaced with Pb(Mg_1/3Nb_2/3)O₃ (PMN) for obtaining a perovskite composition around a morphotropic phase boundary (MPB), (1−x)(0.6PZN-0.4PMN)-xPT ((1−x)PZMN-xPT, PT: PbTiO₃) where x = 0.23. The thin films with this composition were prepared with a polyethylene glycol (PEG) modi-fied sol-gel method on LaAlO₃ substrates. The microstructural evolution of the films on heat treatment was examined with X-ray diffraction. With the aid of PEG, the formation of the pyrochlore phase was suppressed and the perovskite phase formed directly from the amorphous gel film. The multilayer films with a thickness around 0.25 μm showed a single perovskite phase without any detectable pyrochlore structure. Microscopic images showed uniform grain size of a few tens of nanometers. The role of the polymer dramatically promoting the perovskite phase was investigated with the aid of X-ray photoelectron spectroscopy and thermal analysis. The dielectric constant of the obtained film was 4160 at 1 kHz. The film demonstrated typical ferroelectric hysteresis loops and exhibited excellent piezoelectric performance.     

Electrochemical behavior of membranes of ion-selective electrodes based on complex oxides

Lead-selective film electrodes with solid contact with membranes on the basis of niobates and vanadates of compositions Sr_2.75Pb_0.25La(VO₄)₃, Ba_3.8Pb_0.2Nb₂O₉, Ba_3.5Pb_0.5Nb₂O₉, Pb₃NiNb₂O₉, and Pb₂Nb₂O₇ are constructed and studied. Basic electrochemical characteristics of ion-selective electrodes, such as linearity region and steepness of the electrode function, working pH interval, type of electrode function, and reproducibility are determined. The electrode with a membrane on the basis of Pb₃NiNb₂O₉ is tested and recommended as an indicator in the method of potentiostatic titration. The optimum titrant for assaying ions of lead(II) in solution is potassium chromate.     

Structural Variety of Niobium(V) Polyoxo Clusters Obtained from the Reaction with Aromatic Monocarboxylic Acids: Isolation of {Nb2O}, {Nb4O4} and {Nb8O12} Cores

The reactivity of aryl monocarboxylic acids (benzoic, 1- or 2-naphtoic, 4’-methylbiphenyl-4-carboxylic, and anthracene-9-carboxylic acids) as complexing agents for the ethoxide niobium(V) (Nb(OEt)₅ precursor has been investigated. A total of eight coordination complexes were isolated with distinct niobium(V) nuclearities as well as carboxylate complexation states. The use of benzoic acid gives a tetranuclear core Nb₄(μ₂-O)₄(L)₄(OEt)₈] (L=benzoate ( 1 )) with four Nb−(μ₂-O)−Nb linkages in a square plane configuration. A similar tetramer, 7 , was obtained with 2-naphtoic acid by using a 55 % humid atmosphere synthetic route. Two types of dinuclear brick were identified with one central Nb−(μ₂-O)−Nb linkage; they differ in their complexation state, with one bridging carboxylate ([Nb₂(μ₂-O)(μ₂-OEt)(L)(OEt)₆], with L=1-naphtoate ( 3 ) or anthracene-9-carboxylate ( 5 )) or two bridging carboxylate groups ([Nb₂(μ₂-O)(L)₂(OEt)₆], with L=4’-methylbiphenyl-4-carboxylic ( 4 ) or anthracene-9-carboxylate ( 6 )). An octanuclear moiety [Nb₈(μ₂-O)₁₂(L)₈(η₁-L)_4−x(OEt)_4+x] (with L=2-naphtoate, x=0 or 2; 8 ) was obtained by using a solvothermal route in acetonitrile; it has a cubic configuration with niobium centers at each node, linked by 12 μ₂-O groups. The formation of the niobium oxo clusters was characterized by infrared and liquid ¹H NMR spectroscopy in order to analyze the esterification reaction, which induces the release of water molecules that further react through oxolation with niobium atoms, in different {Nb₂O}, {Nb₄O₄} and {Nb₈O₁₂} nuclearities.     

Formation of MgxNbyOx+y through the Mechanochemical Reaction of MgH2 and Nb2O5, and Its Effect on the Hydrogen‐Storage Behavior of MgH2

The present study aims to understand the catalysis of the MgH₂–Nb₂O₅ hydrogen storage system. To clarify the chemical interaction between MgH₂ and Nb₂O₅, the mechanochemical reaction products of a composite mixture of MgH₂+0.167 Nb₂O₅ was monitored at different time intervals (2, 5, 15, 30, and 45 min, as well as 1, 2, 5, 10, 15, 20, 25, and 30 h). The study confirms the formation of catalytically active Nb‐doped MgO nanoparticles (typically Mg_xNb_yO_x+y, with a crystallite size of 4–8 nm) by transforming reactants through an intermediate phase typified by Mg_m?xNb_2n?yO_5n?(x+y). The initially formed Mg_xNb_yO_x+y product is shown to be Nb rich, with the concentration of Mg increasing upon increasing milling time. The nanoscale end‐product Mg_xNb_yO_x+y closely resembles the crystallographic features of MgO, but with at least a 1–4 % higher unit cell volume. Unlike MgO, which is known to passivate the surfaces in MgH₂ system, the Nb‐dissolved MgO effectively mediates the Mg–H₂ sorption reaction in the system. We believe that this observation will lead to new developments in the area of catalysis for metal–gas interactions.     

Untersuchungen in den Systemen Titan (Zirkonium,Hafnium)-Niob-Kohlenstoff

Zusammenfassung Die Aufteilung der Phasenfelder in den Dreistoffen: Titan (Zirkonium, Hafnium)-Niob-Kohlenstoff wird mit Hilfe gesinterter Proben bei je einer Temperatur ermittelt. Alle drei Systeme sind durch das Auftreten großer homogener Bereiche der Mischcarbide (Ti, Nb) C_1-x , (Zr, Nb) C_1-x und (Hf, Nb) C_1-x charakterisiert. Nb₂C löst wenig von dem Zweitcarbid. Eine thermodynamische Betrachtung führt zu einer Abschätzung der Stabilitätsdifferenz zwischen NbC_1-x und Nb₂C.

---

The ternary systems: Ti(Zr, Hf)–Nb–C have been examined by means of sintered specimens. The equilibria of the above mentioned systems are characterized by the occurrence of a large domain of the respective solid solutions (Ti, Nb) C_1-x , (Zr, Nb)C_1-x and (Hf, Nb)C_1-x . Nb₂C dissolves very little of the second carbide. Thermodynamic considerations lead to an evaluation of the difference of stability between NbC_1-x and Nb₂C.

---

---

Mit 6 Abbildungen     

Synthesis and characterization of rare-earth doped SrBi2Nb2O9 phase in lithium borate based nanocrystallized glasses

Glass composites comprising of un-doped and samarium-doped SrBi₂Nb₂O₉ nanocrystallites are fabricated in the glass system 16.66SrO-16.66[(1−x)Bi₂O₃-xSm₂O₃]-16.66Nb₂O₅-50Li₂B₄O₇ (0?x?0.5, in mol%) via the melt quenching technique. The glassy nature of the as-quenched samples is established by differential thermal analyses. Transmission electron microscopic studies reveal the presence of about 15 nm sized spherical crystallites of the fluorite-like SrBi_1.9Sm_0.1Nb₂O₉ phase in the samples heat treated at 530 °C. The formation of layered perovskite-type un-doped and samarium-doped SrBi₂Nb₂O₉ nanocrystallites with an orthorhombic structure through the intermediate fluorite phase is confirmed by X-ray powder diffraction and micro-Raman spectroscopic studies. The influence of samarium doping on the lattice parameters, lattice distortions, and the Raman peak positions of SrBi₂Nb₂O₉ perovskite phase is clarified. The dielectric constants of the perovskite SrBi₂Nb₂O₉ and SrBi_1.9Sm_0.1Nb₂O₉ nanocrystals are relatively larger than those of the corresponding fluorite-like phase and the precursor glass.     

Structure and polymorphism of complex phosphates prepared from fluxes of the Na2O-P2O5-Fe2O3-Nb2O5 system

The phase formation of complex phosphates in the Na₂O-P₂O₅-Fe₂O₃-Nb₂O₅ flux system was studied in the ranges of sodium-to-phosphorus ratios of 0.7–1.2 and iron-to-niobium ratios of 0.9–2.7. The crystallization region and crystallization conditions for the compounds of composition Na_3?2x Fe_2-x Nb_x(PO₄)₃ (0.8 ≤ x < 1.2) were found. These compounds can be prepared in two (hexagonal and monoclinic) polymorphs. Single-crystal X-ray diffraction experiments were carried out for hexagonal NaFeNb(PO₄)₃ (space group $R\bar 3$ c, a = 8.590 Å, c = 22.013 Å). The polymorphism in Na_3-2x Fe_2-x Nb_x(PO₄)₃ complex phosphates is considered as dependent on the preparation parameters.     

Effects of Charge Compensation on Colossal Permittivity and Electrical Properties of Grain Boundary of CaCu3Ti4O12 Ceramics Substituted by Al3+ and Ta5+/Nb5+

The effects of charge compensation on dielectric and electrical properties of CaCu₃Ti_4-x(Al_1/2Ta_1/4Nb_1/4)_xO₁₂ ceramics (x = 0−0.05) prepared by a solid-state reaction method were studied based on the configuration of defect dipoles. A single phase of CaCu₃Ti₄O₁₂ was observed in all ceramics with a slight change in lattice parameters. The mean grain size of CaCu₃Ti_4-x(Al_1/2Ta_1/4Nb_1/4)_xO₁₂ ceramics was slightly smaller than that of the undoped ceramic. The dielectric loss tangent can be reduced by a factor of 13 (tanδ ~0.017), while the dielectric permittivity was higher than 10⁴ over a wide frequency range. Impedance spectroscopy showed that the significant decrease in tanδ was attributed to the highly increased resistance of the grain boundary by two orders of magnitude. The DFT calculation showed that the preferential sites of Al and Nb/Ta were closed together in the Ti sites, forming self-charge compensation, and resulting in the enhanced potential barrier height at the grain boundary. Therefore, the improved dielectric properties of CaCu₃Ti_4-x(Al_1/2Ta_1/4Nb_1/4)_xO₁₂ ceramics associated with the enhanced electrical properties of grain boundaries. In addition, the non-Ohmic properties were also improved. Characterization of the grain boundaries under a DC bias showed the reduction of potential barrier height at the grain boundary. The overall results indicated that the origin of the colossal dielectric properties was caused by the internal barrier layer capacitor structure, in which the Schottky barriers at the grain boundaries were formed.     

Reaction mechanism in the formation of perovskite Pb(Fe1/2Nb1/2)O3 by calcining of mixed oxides (CMO)

A calcining at 300°C and sintering process were proposed to obtain a pure perovskite phase Pb(Fe_1/2 Nb_1/2)O₃ from a 4PbO/Nb₂O₅/Fe₂O₃ mixture, which is calcined at 300°C for several days and sintered at various temperatures for 2h; the resultant powder was air quenched. The X-ray powder diffraction pattern of the sintered sample is carefully analyzed to identify intermediate phases. The effects of calcining at 300°C and sintering on obtaining PFN are based on the deformation of Pb₅Fe₄Nb₄O₂₁. A reaction mechanism for the calcining cycle of Pb(Fe_1/2 Nb_1/2)O₃ is proposed.     

CdS插层的K4Nb6-xCuxO17复合物的制备及其光催化制氢活性

以Nb2O5,K2CO3和CuO为原料经高温固相反应合成K4Nb6-xCuxO17催化剂,并通过层间离子交换反应,胺插入反应以及硫化反应制备CdS插层K4Nb6-xCuxO17复合催化剂(K4Nb6-xCuxO17/CdS)。利用X射线衍射(XRD),X射线光电子能谱(XPS),场发射扫描电镜(SEM),X射线能谱仪(EDX),紫外-可见漫反射(UV-Vis),分子荧光光谱(PL)等技术对催化剂进行表征。考察了催化剂的可见光催化制氢活性。结果表明,Cu离子掺杂进入K4Nb6O17晶格中,CdS位于K4Nb6O17层间。CdS插层K4Nb6-xCuxO17催化剂的最大吸收光波长约为550 nm。催化剂制氢活性有明显提高,紫外光和可见光下3 h产氢量分别达到279.83 mmol.gcat-1和7.11 mmol.gcat-1。最后讨论了复合催化剂光生电荷转移机理。     

Synthesis of nanopowders of pentoxides Ta2y Nb2(1−y)O5

The processes of production of high purity nanopowders of niobium and tantalum pentoxide Ta_2y Nb_2(1–y)O₅ with a low content of fluorine and Nb₂O₅ in low-temperature polymorph were studied. Ceramic samples were prepared from a charge of solid solutions LiTa _y Nb_1–y O₃ and Li _x Na_1–x Ta _y Nb_1–y O₃ synthesized using coprecipitated pentoxide Ta_2y Nb_2(1–y)O₅. Therewith for solid solutions LixNa_1–x Ta _y Nb_1–y O₃ significantly larger values of high dielectric constant and ionic conductivity were achieved compared to the solid solutions obtained by using a mechanical mixture of Ta₂O₅ and Nb₂O₅. This converts solid solutions LixNa_1–x Ta _y Nb_1–y O₃ from acoustoelectronic and piezoelectric type of materials into the capacitor and ion-conductive type of solid materials.     

Phase equilibria,charge transport,and mass transport in Sr<Subscript>4</Subscript>Nb<Subscript>2</Subscript>O<Subscript>9</Subscript>-“M<Subscript>4</Subscript>Nb<Subscript>2</Subscript>O<Subscript>9</Subscript>” (M = Cd,Cu, Ni,and Zn) systems

Homogeneous fields of Sr_{4 − x} M _x Nb₂O₉ (M = Cd, Cu, Ni, or Zn) solid solutions were determined using powder X-ray diffraction. Phase fields were plotted proceeding from the tolerance factor t and electronegativity ratio $ \bar k_A /\bar k_B $ \bar k_A /\bar k_B with a satisfactory fit of experimental results. Thermogravimetry was used to establish the major kinetic laws of solid-phase synthesis (conversion, rate-controlling stage, and effective activation energy) in (4 − x)SrCO₃ + xMO + Nb₂O₅ powdery mixtures. Direct radiometry was used to determine ⁹⁰Sr, ⁶³Ni, and ⁶⁵Zn self-diffusion coefficients in solid solutions based on the Sr₄Nb₂O₉ phase. Electrical conductivity was measured as a function of temperature for all Sr₄Nb₂O₉-“M₄Nb₂O₉” samples. The conductivity of Sr_{4 − x} M _x Nb₂O₉ (M = Cd, Cu, Ni, or Zn) solid solutions has a mixed ion-electron character.     

Sol–gel synthesis and structural characterization of niobium-silicon mixed-oxide nanocomposites

(Nb₂O₅) _x ·(SiO₂)_1−x gels of four different compositions with x = 0.025 (2.5Nb), 0.050 (5Nb), 0,10 (10Nb) and 0.20 (20Nb) were synthesized at room temperature from niobium penta-chloride and tetra-ethoxysilane and their structural evolution with the temperature was examined by X-ray diffraction, thermogravimetry/differential thermal analysis, Raman and IR spectroscopy (Fourier transform). The synthesis procedure tuned in this work allowed to obtain for each studied composition transparent chemical gels in which the niobium dispersion resulted to be strongly dependent on the Nb₂O₅ loading: it was on the atomic scale for the 2.5Nb and 5Nb gel samples whereas the gel structure of the 10Nb and 20Nb appears formed by phase separated niobia-silica nanodomains. All dried gels keep their amorphous nature up to 873 K, while at higher temperatures crystallization of T- and H-Nb₂O₅ polymorphs were observed according to the Nb₂O₅ loading: at low loading T-Nb₂O₅ was the main crystallising phase, whereas at higher one the H-Nb₂O₅ prevails. Particularly, T-Nb₂O₅ was the sole crystallising phase in the whole explored temperature range for the 2.5Nb, keeping its nanosize up to 1273 K for all samples except for the 20Nb.     

Synthesis and Luminescence Properties of Amber Emitting La7Sr[Si10N19O3] : Eu2+ and Syntheses of the Substitutional Variants RE8-xAEx[Si10N20-xO2+x] : Eu2+ with RE=La,Ce; AE=Ca,Sr, Ba; 0≤x≤2

The oxonitridosilicate La₇Sr[Si₁₀N₁₉O₃] : Eu²⁺ and its substitutional variants RE_8-xAE_x[Si₁₀N_20-xO_2+x] : Eu²⁺ with RE=La, Ce; AE=Ca, Sr, Ba and 0≤x≤2 were synthesized starting from REN, SrN/Ca₃N₂/Ba₂N, SiO₂, amorphous Si₃N₄ and Eu₂O₃ as doping agent at 1600 °C in a radiofrequency furnace. The crystal structure of La₇Sr[Si₁₀N₁₉O₃] was solved and refined based on single-crystal X-ray diffraction data. La₇Sr[Si₁₀N₁₉O₃] crystallizes in the orthorhombic space group Pmn2₁ (no. 31). The crystal structures of the isotypic compounds RE_8-xAE_x[Si₁₀N_20-xO_2+x] were confirmed by Rietveld refinements based on powder X-ray diffraction data using the single-crystal data of La₇Sr[Si₁₀N₁₉O₃] as starting point. Crystal structure elucidation reveals a 3D network of vertex sharing SiN₄ and SiN₂(N_1/2-x/4O_1/2+x/4)₂ (0≤x≤2) tetrahedra. When excited with UV to blue light, La₇Sr[Si₁₀N₁₉O₃] : Eu²⁺ shows amber luminescence with λ_em=612 nm and fwhm=84 nm/2194 cm⁻¹, which makes it interesting for application in amber phosphor-converted light emitting diodes.