Synthesis and characterization of a soluble blue light emitting alternating copolymer

An alternating copolymer with monomer units of fluorene and phenylenedivinylene was synthesized by reaction between n-hexyl fluorene phosphonium salt and isophthalic aldehyde based on the Wittig reaction. The polymer solution in chloroform was made into a film with a very fine surface by spin-casting on indium-tin oxide (ITO) coated glass to fabricate a light emitting diode (LED) with an aluminum negative electrode. The optical absorption spectrum of the solid film shows a peak at 370 ran while the PL spectrum has the main peak at 560 nm with a secondary peak at 440 nm and the EL spectrum has a single peak at 560 nm showing the Stokes shift of 190 nm. The peak in the PL spectrum shifts to 420 nm with a vibronic structure at 440 nm on either dilution by chloroform or blending with polyvinylcarbazole (PVK). The emissive polymer bulk seemed to generate sites for excimers and molecular aggregates which were diminished on the dilution or blending. The peak in the EL spectrum also shifts to 440 nm on blending of 20% of the copolymer with PVK. Further dilution to 10% of the copolymer shifts the EL peak to 420 nm with the onset potential of 15 V and the highest quantum efficiency of 0.01% in this series. The concentrated channels were developed in the blends with severe phase separation to show a lower onset potential but poor quantum efficiency.     

Copolyfluorenes containing phenothiazine or thiophene derivatives: Synthesis,characterization, and application in white‐light‐emitting diodes

Four copolyfluorenes chemically doped with 0.1 and 1 mol % 3,7‐bis[2‐thiophene‐2‐yl)‐2‐cyanovinyl]phenothiazine ( PFPhT ) or 2,5‐bis[2‐(thiophene‐2‐yl)‐2‐cyanovinyl]thiophene chromophores ( PFThT ) were synthesized using the Suzuki coupling reaction and applied in white‐light‐emitting devices. They were characterized by GPC, elemental analysis, DSC, TGA, optical spectra, and cyclic voltammetry. They exhibited good thermal stability (T_d > 420 °C) and moderate glass transition temperatures (>95 °C). The PhT‐Br and ThT‐Br showed PL peaks at 586 and 522 nm (with a shoulder at 550 nm). In film state, PL spectra of the copolymers comprised emissions from the fluorene segments and the chromophores due to incomplete energy transfer. Both monomers exhibited low LUMO levels around ?3.50 to ?3.59 eV, whereas the PhT‐Br owned the higher HOMO level (?5.16 eV) due to its electron‐donating phenothiazine core. Light‐emitting diodes with a structure of ITO/PEDOT:PSS/copolymer/Ca(50 nm)/Al(100 nm) showed broad emission depending on the chromophore contents. The maximum brightness and maximum current efficiency of PFPhT2 ( PFThT1 ) device were 8690 cd/m² and 1.43 cd/A (7060 cd/m² and 0.98 cd/A), respectively. White‐light emission was realized by further blending PFPhT2 with poly(9,9‐dihexylfluorene) (w/w = 10/1), with the maximum brightness and maximum current efficiency being 10,600 cd/m² and 1.85 cd/A. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 833–844, 2009     

Synthesis and characterization of luminescent copolymers containing iminodibenzyl and divinylbenzene chromophores

New conjugated copolymers containing alternating N‐hexyl‐3,8‐iminodibenzyl and divinylbenzene chromophores {poly(N‐hexyl‐3,8‐iminodibenzyl‐1,2‐ethenylene‐2,5‐dihexyloxy‐1,4‐phenylene‐1,2‐ethenylene) ( P1 ) and poly[N‐hexyl‐3,8‐iminodibenzyl‐2,5‐bis(hexyloxy)cyanoterephthalidene] ( P2 )} were synthesized according to Wittig and Knoevenagel polymerization. A copolymer containing alternating carbazole and divinylbenzene derivatives {poly[9‐(2‐ethylhexyl)‐3,6‐carbazole‐1,2‐ethenylene‐2,5‐dihexyloxy‐1,4‐phenylene‐1,2‐ethenylene] ( P3 )} was also synthesized for comparison. The copolymers were soluble in common organic solvents such as tetrahydrofuran and toluene. Absorption and photoluminescence measurements revealed that cyano substitution at the vinylene moiety in P2 brought about a significant bathochromic shift and led to an electroluminescence color change from green to orange. The band edge energies of the copolymers were estimated from cyclic voltammograms and optical band gaps. P1 and P3 showed similar highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) levels, indicating that the electron‐donating abilities of the iminodibenzyl and carbazole chromophores were comparable. However, compared with those of P1 and P3 , the HOMO and LUMO levels of P2 were greatly reduced because of conjugating and electron‐withdrawing CN groups. The threshold electric field of an Al/ P1 /ITO glass single‐layer light‐emitting diode was approximately 10 × 10⁵ V/cm, whereas those for P2 and P3 were 7.5 and 16 × 10⁵ V/cm, respectively. The electroluminescence emission maxima of P1–P3 were 498, 514, and 559 nm, respectively. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3847–3857, 2002     

一种主链含有离子导电性链段的功能发光共聚物

1990年英国剑桥大学的Ｂｕｒｒｏｕｇｈｅｓ等人[1 ]使用聚对苯乙炔 (ＰＰＶ)成功的制备了第一个聚合物电致发光二极管 (ＬＥＤ)的报道引起了电致发光领域世界范围内的研究高潮 ,特别是 1 995年裴启兵等人[2 ,3] 发明的电化学发光电池 (ＬＥＣ)的技术更进一步地推动了聚合物发光器件商业化的步伐。ＬＥＣ相对于ＬＥＤ具有很多优势[4] ,但是ＬＥＣ中一个关键技术是要克服共轭非极性荧光聚合物与非共轭极性离子传导聚合物的相分离问题从而制备高质量的发光薄膜 .目前较好的解决方法是将极性的离子传导侧链接枝在荧光聚合物的主链上而得到直接…     

Novel Blue Light-emitting PPV-based Copolymer Containing Triazole and Carbazole Units

For making the polymer light-emitting diode (PLED) device with good performance, it is desirable to reach the balance of electron and hole injection. However, for most conjugated polymer, hole injection is more favorable than electron injection. So it is important to design and synthesize the bipolar conjugated polymer with both electron and hole transporting ability for the fabrication of single-layer PLED1-2. In this communication we present the synthesis and preliminary characterizatio…     

Excimer suppression mechanism in light emitting polymer blends

Alternating copolymer of distyrylenediethylhexyloxyphenylene and phenyltriazine(PPVT) or hydroxyphenyltriazine(PVOT) is synthesized in order to enhance the electron mobility in the light emitting polymers. Photoluminescence(PL) spectrum of PPVT shows excimeric characteristics but PVOT generates excitonic PL emission. A blend of PVOT with polyvinylcarbazole(PVK) enhances the PL intensity of PVOT on photoexcitation of PVK indicating an efficient energy transfer. The excimeric PL emission of PPVT is suppressed on photoexcitation of a blend with PVK at the UV-visible absorption(AB) maximum of PVK, which is an indirect photoexcitation, while the energy transfer from PVK to PPVT is not completed.     

Synthesis and characterization of bipolar copolymers containing oxadiazole and carbazole pendant groups and their application to electroluminescent devices

A series of random copolymers POC10{Poly(2,5‐bis[(5‐decyloxy‐phenyl)‐1,3,4‐oxadiazole]styrene)}‐co‐Poly(N‐vinylcarbazole) (PVK) with different nvk content were synthesized through common radical polymerization and were incorporated into light emitting diodes as emitting layers. The structures and properties of the copolymers were characterized and evaluated by GPC, TGA, DSC, UV, PL, CV, and EL analyses. All the polymers enjoy high thermal stability. Cyclic voltammetry revealed that, with the incorporation of N‐vinylcarbazole to the copolymer, these copolymers had high‐lying HOMO energy values, which facilitated hole injection. PL peaks in the film show blue‐shift compared with those in solutions and fluorescent quantum efficiency decreased with the nvk content increasing, which supported the efficient energy transfer from nvk units to the oxadiazole units. Single‐layer LEDs with the configuration of ITO/PEDOT/PC10‐nvk/Mg:Ag/Ag were fabricated, which emit a blue light around 440 and 490 nm with a maximum brightness of 675.3 cd/m² and luminous efficiency of 0.108 cd/A. Moreover, we fabricated electrophosphorescent device from bipolar transport copolymer PC10‐nvk4 as host material and an orange‐light‐emitting iridium phosphor IrMDPP as guest. The maximum luminous efficiency of 0.548 cd/A was obtained. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5452–5460, 2008     

吡啶-芴类电荧光聚合物的光谱特性

用Suzuiki聚合反应将二溴代吡啶 (2 ,5 、2 ,6 、3,5 取代 )与芴共聚 ,合成了不同主链结构的吡啶 芴共聚物 .研究结果表明 ,将吡啶基引人聚芴主链可以调节共聚物的发光颜色 .间位吡啶基引入聚芴主链 ,使聚合物的能级加宽 ,PL、EL光谱发生蓝移 ;对位吡啶基则使光谱红移 .间位吡啶基 (3,5 Py、2 ,6 Py)引入聚芴主链 ,可提高聚合物的色纯度 .共聚物中 3,5 Py含量为 4 0mol%时 ,可得到较纯的蓝光 .     

Suppression of secondary PL emission by indirect photoexcitation

A blend of a newly synthesized polyfluorene(PDHBF) and polyvinylcarbazole(PVK) exhibits a photoluminescence(PL) emission spectrum of PDHBF without an increase in the PL intensity on photoexcitation at 340 nm, the UV-visible absorption maximum of PVK, despite of a substantial spectrum overlap. However, the indirect photoexcitation of the blend suppresses the secondary emission of the PL with the maximum at 520 nm. The chromophores generating the secondary emission are formed when the chromophores are photoexcited above the critical energy level of an excited state. The chromophores formed by the energy transfer have energy lower than the critical energy and fail to form the excimers. A low temperature PL study of the blend in a cryogenic chamber proves that the energy transfer in the system takes place mainly between the excimers of PVK generated by the partially eclipsed dimeric states of two carbazole units and the fluorophores of PDHBF.     

Polyfluorenes minimally doped with 1,4‐bis(2‐thienyl‐2‐cyanovinyl)benzene chromophore: Their synthesis,characterization, and application to white‐light‐emitting materials

Copolyfluorenes ( PFR1 and PFR2 ), chemically doped with 0.1 and 0.025 mol % 2,5‐dihexyloxy‐1,4‐bis(2‐thienyl‐2‐cyanovinyl)benzene (MR chromophere) were synthesized by the Suzuki coupling reaction. The PFR s were used to fabricate white‐light‐emitting devices through incomplete energy transfer. Because of the low content of the MR chromophore, the optical, thermal, and electrochemical properties of the PFR s were almost identical to those of polyfluorene, except for their photoluminescent (PL) and electroluminescent (EL) properties. The copolymer films showed PL peaks at about 428 and 570 nm originating from fluorene segments and MR chromophores, respectively. Compared with the model compound ( MR ), the polymer chains extended the conjugation length of the MR chromophores and exhibited a 20–48 nm red‐shift in the emission band. In addition, the lower LUMO level of the MR (?3.27 eV) was expected to improve the electron injection. The EL devices [ITO/PEDOT:PSS/ PFR s/Ca (50 nm)/Al (100 nm)] showed a broad emission band, covering the entire visible region, with chromaticity coordinates of (0.36, 0.35) and (0.32, 0.30) for PFR1 and PFR2 devices, respectively. The emission color of the PFR2 device was very similar to that of a pure white light (0.33, 0.33); and the maximal brightness and current efficiency were 3011 cd/m² and 1.98 cd/A, respectively, which surpass those found for polyfluorene devices (1005 cd/m², 0.28 cd/A). A). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3703–3713, 2008     

Chromophore‐labeled dendrimers for use in single‐layer light‐emitting diodes

Two novel chromophore‐labeled dendrimers are presented and their incorporation into two‐component, single layer organic light emitting diodes (OLEDs) is described. The photoluminescence (PL) spectra, both in solution and in the solid state, demonstrate that Forster energy transfer from the donor chromophores on the dendrimers periphery to the acceptors located at the core is highly efficient, and affords emission exclusively from the core dyes, either coumarin 343 or a benzene‐capped pentathiophene. When these dendrimers are doped into single layer OLEDs, the electroluminescence (EL) is nearly identical to the photoluminescence described above, indicating once again exclusive emission from the core chromophores.     

Synthesis and optoelectronic properties of silole‐containing polyfluorenes with binary structures

2,5‐Bis(2‐bromofluorene‐7‐yl)silole was prepared by a modified one‐pot synthesis with a reverse addition procedure, from which novel silole‐containing polyfluorenes with binary random and alternating structures (silole contents between 4.5 and 25% and high M_w up to 509 kDa were successfully synthesized. The well‐defined repeating unit of the alternating copolymer comprises a terfluorene and a silole ring. Optoelectronic properties including UV absorption, electrochemistry, photoluminescence (PL), and electroluminescence (EL) of the copolymers were examined. The different excitation energy transfers from fluorene to silole of the copolymers in solution and in the solid state were compared. The films of the copolymers showed silole‐dominant green emissions with high absolute PL quantum yields up to 83%. EL devices of the copolymers with a configuration of ITO/PEDOT/copolymer/Ba/Al displayed exclusive silole emissions peaked at around 543 nm and the highest EL efficiency was achieved with the alternating copolymer. Using the alternating copolymer and poly(9,9‐dioctylfluorene) as the blend‐type emissive layer, a maximum external quantum efficiency of 1.99% (four times to that of the neat film) was realized, which was a high efficiency so far reported for silole‐containing polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 756–767, 2007     

Photophysical and electrochemical characterization of new poly(arylene vinylene) copolymers containing quinoline or bisquinoline segments

Four new fluorescent conjugated vinylene‐copolymers incorporating quinoline or bisquinoline segments along the backbone were synthesized by Heck coupling. Three of them were fluorenevinylene‐copolymers and contained quinoline ( PQFV , PQFVT ) or bisquinoline segments ( PBQFV ). One of them ( PBQPV ) was phenylenevinylene‐copolymer and contained bisquinoline segments. All the copolymers were soluble in common organic solvents and had relatively low glass transition temperature (T_g = 50–56 °C for fluorenevinylenes and T_g < 25 °C for phenylenevinylene). In THF solutions, the quinoline‐containing copolymers showed absorption maxima at 411–420 nm while the bisquinoline‐containing ones exhibited maxima at 357–361 nm. The emission maxima of solutions were 465–490 nm. The copolymers showed high quantum yields up to 64%. The films exhibited absorption and emission maxima in the range of 371–437 nm and 480–521 nm, respectively. All copolymers revealed reversible reduction with electron affinity of 2.66–3.53 eV and irreversible oxidation scans with ionization potential of 5.39–5.53 eV. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3370–3379, 2009     

Electroluminescent copolymers based on dihexylfluorene and 2‐{2,6‐bis[2‐(4‐diphenylaminophenyl)vinyl]pyran‐4‐ylidene}malononitrile units

A series of statistical copolymers (poly[(9,9‐di‐n‐hexylfluorene)‐co‐2‐{2,6‐bis‐[2‐(4‐diphenylaminophenyl)vinyl]pyran‐4‐ylidene}malononitrile) were synthesized by the Suzuki coupling reaction. The copolymers showed absorption bands at 379 and 483–489 nm, which were attributed to the oligofluorene segments and the segments containing 2‐[2,6‐bis(2‐{4‐[(4‐bromophenyl)phenylamino]phenyl}vinyl)pyran‐4‐ylidene]malononitrile ( 3 ), respectively. The absorption band around 483–489 nm increased with the feed ratio of 3 . The photoluminescence (PL) spectra of the copolymers showed emission bands at 420 and 573–620 nm. As the feed ratio of 3 increased, the PL emission in the longer wavelength region redshifted, and the intensity increased as well. The electroluminescence (EL) spectrum of the copolymers showed a very weak emission at 420 nm. The PL and EL emission colors redshifted dramatically with the increase in the feed ratio of 3 . The highest occupied molecular orbital and lowest unoccupied molecular orbital levels of the model compound (2‐{2,6‐bis[2‐(4‐diphenylaminophenyl)vinyl]pyran‐4‐ylidene}malononitrile) were determined to be ?5.34 and ?3.14 eV, respectively. It was concluded that energy transfer took place from the oligofluorene blocks to the segments containing 3 and that direct charge trapping occurred in the segments containing 3 during the EL operation. The Commission Internationale de l'Eclairage (CIE) chromaticity coordinates of the copolymer (x = 0.63, y = 0.37) containing 10 mol % 3 were very close to those (x = 0.67, y = 0.33) for National Television System Committee (NTSC) red with a maximum photometric power efficiency of 0.27 cd/A. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3729–3737, 2006     

Synthesis and characterization of novel poly(p‐phenylenevinylene) derivatives containing phenothiazine‐5‐oxide and phenothiazine‐5, 5‐dioxide moieties

PPV‐based copolymers containing phenothiazine‐5‐oxide and phenothiazine‐5, 5‐dioxide moieties have been successfully synthesized by Wittig‐Horner reaction and characterized by means of UV‐vis, photoluminescence, electroluminescence spectra, and cyclic voltammetry. All of these copolymers can be dissolved in common organic solvents such as chloroform, tetrahydrofuran, and toluene. The PL maxima in the film state are located at 582, 556, and 552 nm for P1, P2, and P3, respectively. The HOMO and LUMO levels of P2 are found to be ?5.21 and ?2.68 eV, respectively; whereas those of P3 are found to be ?5.26 and ?2.71 eV, respectively. The cyclic voltammetry result indicates that the conversion of electron‐donating sulfide to electron‐withdrawing sulfoxide or sulfone group in polymers plays a dominating role in increasing its oxidation potential. Yellowish‐green light ranging from 568 to 540 nm was observed for the single layer device with the configuration of ITO/Polymer/Ca/Al. Double layer devices with Zn (BTZ)₂ as a hole blocking layer exhibited enhanced EL performance compared to the single layer devices. The maximum brightness of the double layer devices of P1, P2, and P3 is 278, 400, and 796 cd/m², respectively. The results of EL and electrochemical analyses revealed that they are promising candidate materials for organic, light‐emitting diodes with hole‐transporting ability. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4291–4299, 2007     

NOVEL RED LIGHT-EMITTING POLYMERS BASED ON 2,7-CARBAZOLE AND THIOPHENE DERIVATIVES

A series of conjugated copolymers derived from 9-ethylhexyl-2,7-carbazole(Cz)and 4,7-di(4-hexylthien-2-yl)- 2,1,3-benzothiadiazole(DHTBT)was synthesized by Suzuki polycondensation.The photo-and electro-luminescent properties of these polymers were investigated.Efficient energy transfer from the Cz segment to the DHTBT unit occurs even if the DHTBT content as low as 1 mol%.PL emission was red-shifted significantly from 645 nm to 700 nm with the increase in DHTBT content by 1-50 mol%.PL efficiencies decrea...     

Novel Efficient Light-Emitting Polyfluorene Derivatives Modified by Electron-Deficient Moieties with Nonlinear Structure

Two novel fluorene-based copolymers (PFSD and PFMD) containing squaric acid or maleimide unit in the main chain were synthesized in good yields by Suzuki coupling reaction. The resulting polymers possess excellent thermal stability, high electron affinity and high photolurninescence (PL) quantum yields. They can fluoresce in yellow-light range due to either the charge transfer between a fluorene segment and an electron-deficient containing squaric acid/maleimide segment of the polymers or the Forrster energy transfer between different polymer chains.The results from PL measurements of the isothermally heated polymer thin films show that the commonly observed aggregate excimer formation in polyfluorenes is very effectively suppressed in these two polymers due to the nonlinear structures of maleimide and squaric acid moieties. Double-layer polymer light-emitting diodes (PLED) were fabricated using the resulting polymers as the emitting layers and Ba or Mg：Ag(V：V=10：1) as cathodes.All the devices show bright yellow emission (562-579nm) with different maximum external quantum efficiencies (0.006%-1.13%). Compared with the other devices, indium-tin oxide (ITO)/polyethylenedioxythiophene (PEDOT):polystyrene sulfonic acid (PSS)/PFMD/Mg:Ag has the higher maximum external quantum efficiency of 1.13% at 564cd/m^2 with a bias of 8.4V.     

Synthesis and electroluminescent properties of soluble poly(3,6-fluorene) and its copolymer

Soluble poly(3,6-fluorene) and its copolymer were synthesized by nickel-catalyzed coupling. Poly(3,6-fluorene) exhibited the optical band gap of 3.6 eV, the emission maximum at 347 nm, and the HOMO level of -6.05 eV. These results confirm that 3,6-linkage is an effective way to get wide band gap conjugated polymers. Furthermore, its copolymer containing triarylamine moieties emits deep-blue light, which means that the adjustable blue light emission can be obtained from their copolymers via energy transfer.     

Single layer light‐emitting diodes from copolymers comprised of mesogen‐jacketed polymer containing oxadiazole units and PVK

A series of copolymers PCt‐co‐Poly(N‐vinylcarbazole) were synthesized through common radical polymerization, in which P‐Ct as a kind of mesogen‐jacketed liquid crystalline polymer was introduced, and the effects of copolymers composing variation on the optical properties of the polymers were studied. The structures and properties of the copolymers were characterized and evaluated by thermogravimetric (TGA), UV, photoluminescence (PL), cyclic voltammetry (CV), and electroluminescence (EL) analyses. All the polymers enjoy high thermal stability. PL peaks in the film show blue‐shift compared with in solutions and fluorescent quantum efficiency decreased with the N‐vinylcarbazole (nvk) content increasing, which supported the efficient energy transfer from nvk units to the oxadiazole units. CV revealed that, with the incorporation of nvk to the copolymer, these copolymers had high‐lying HOMO energy levels ranging from ?5.94 to ?6.09 eV. Single‐layer light‐emitting diodes (LEDs) with the configuration of ITO/PEDOT/PCt‐nvk/Mg:Ag/Ag were fabricated, which emit a blue light around 450 and 490 nm with a maximum luminance of 703 cd/m². The device performance varies with the content of nvk and device configuration, with device configuration ( b ) and PCt‐nvk8 giving the best value of external quantum efficiency of 0.27%. We show here that by proper design copolymer structure and modification of device configuration can exhibit strong blue EL in higher external quantum efficiency. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1843–1851, 2008     

Synthesis of copolyfluorenes containing green chromophores based on triphenylamine unit and their application in light‐emitting diodes

Two series of new copolyfluorenes ( PFTP, PFTT ) were prepared by the Suzuki coupling reaction from two green‐emitting dibromo monomers (TP‐Br, TT‐Br) based on triphenylamine unit to be applied in white light electroluminescent devices. They were characterized by molecular weight determination, elemental analysis, DSC, TGA, absorption and photoluminescence spectra, and cyclic voltammetry. The estimated actual contents of the TP and TT chromophores were lower than 7.8 mol % and 1.9 mol % for PFTP and PFTT , respectively. In film state both copolyfluorenes showed photoluminescence at 400–470 and 470–600 nm originated from fluorene segments and the chromophores, respectively, due to incomplete energy transfer. Light‐emitting diodes with a structure of ITO/PEDOT:PSS/copolymer/Ca(50 nm)/Al(100 nm) showed major emission at 493–525 nm, plus minor emission at 400–470 nm when chromophore contents were low. The maximum brightness and maximum current efficiency of PFTP2 device were 8370 cd/m² and 1.47 cd/A, whereas those of PFTT1 device were 9440 cd/m² and 1.77 cd/A, respectively. Tri‐wavelength white‐light emission was realized through blending PFTT1 with poly(9,9‐dihexylfluorene) and a red‐emitting iridium complex, in which the maximum brightness and CIE coordinates were 6880 cd/m² and (0.31, 0.33), respectively. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1553–1566, 2009