二次微分与样条小波自卷积联用分辨重叠伏安峰

本文采用二次微分法寻找重叠峰的各个峰位置，再利用样条小波自卷积（SWSC）方法直接对重叠的伏安峰进行处理，取得了较好的结果。被处理的重叠峰可达到基线分离，且峰位置的相对误差小于3．0％（完全掩盖峰为5．39％），峰面积的相对误差小于2．0％。方法不用于铅（Ⅱ）－铊（Ⅰ）体系的微分脉冲伏安信号处理，取得满意的结果。     

用于电分析化学重叠信号分辨的样条小波自卷积法

以正弦函数为分辨因子与样条小波滤波器相作用,使其构成样条小波自卷积法的峰分辨器,利用样条小波峰分辨器可以直接分开计算机模拟的不同类型的重叠双峰,分峰前后峰面积和峰位置的相对误差均小于5．0％;将其应用于电分析化学重叠信号的实验数据处理,得到较满意的结果。同时,为样条小波峰分辨器分辨因子提供了新的选择。     

样条小波变换用于分辨重叠伏安峰的研究

将样条小波变换技术用于分辨重叠的伏安峰 ,以选定的分辨因子作用于样条小波滤波器 ,使之成为峰分辨器 ,用它来直接处理重叠的伏安峰 ,取得了较好的结果 .被处理峰可达到基线分离 ,且峰位置的相对误差小于 3.0 %,峰面积的相对误差小于 5 .0 %,方法简便易行 .讨论了各种影响分峰效果的因素 ,包括不同的分辨因子及样条小波基等 ,并应用于镉 (Ⅱ ) 铟 (Ⅲ )和铅 (Ⅱ ) 铊 (Ⅰ )体系的实验数据的处理以验证该方法     

二阶样条小波卷积法分辨重叠化学信号

首次提出了二阶样条小波卷积分峰法, 通过二阶样条小波与重叠化学信号的卷积运算, 确定出各组分的峰位置和峰宽之比, 再利用样条函数构造峰分辨器, 分辨重叠信号, 同时给出了方法的理论依据, 并对参数的选择进行了讨论. 对大量仿真信号和实验信号的处理实践表明, 分辨后信号可以达到基线分离, 峰位置相对误差小于0.2%, 峰面积相对误差小于4.0%, 即使对于重叠严重的信号, 也能获得满意结果. 该方法可以直接用于含噪音的及多个峰的重叠体系, 是一种分辨重叠信号的有效新方法.     

卷积伏安法实验数据的平方根卡尔曼滤波Ⅱ卷积伏安法中重叠峰的分辨

本文探讨采用平方根卡尔曼滤波进行卷积伏安重叠峰的分辨．模拟数据试验表明，１∶Ｎ平方根卡尔曼滤波器、结合标准加入法和快速傅里叶变换，用于重叠峰的分辨，具有较高的准确度和较强的分辨能力，滤波结果有良好的线性关系．用于Ｉｎ（Ⅲ）～Ｃｄ（Ⅱ）重叠响应信号的分辨，获得满意结果     

分辨伏安分析重叠峰的研究

研究了一种处理伏安(极谱)重叠峰的数学模型。将几类具峰状的极谱电流公式归纳成一般的关系式,提出了一个通用的拟合函数,经非线性最小二乘法处理,可得到重叠组份的蜂高、峰电位和半峰宽等参数。本法适用于示差脉冲极谱、交流极谱、方波极谱、一阶导数卷积伏安法及其反向溶出伏安重叠峰的分离。已用于示差脉冲极谱和交流极谱重叠峰的分辨,得到满意结果。     

卷积伏安法实验数据的平方根卡尔曼滤波：Ⅱ卷积伏安法中重叠峰…

本文探讨采用平方根卡尔曼滤波进行卷积伏安重叠峰的分辨。     

修正样条小波最小二乘法用于分辨高噪声重叠峰

采用连续样条小波变换确定重叠信号的组分峰的数目和峰位置,将样条小波最小二乘法加以改进,使其成为既能滤出噪声又能分峰的新方法.对信噪比为1的重叠峰进行处理,得到满意结果.该方法只需对信号进行一次处理,处理速度快,且数据点无须为2n(n∈Z).应用于毛细管电泳电导信号的处理,得到满意结果.     

小波分形分析重叠峰信号

用连续小波变换与分形理论相结合的小波分形峰位法对含噪重叠信号峰位置的提取进行了研究, 同时考察了信噪比和分离度对该法提取峰位置的影响; 结果表明 该法是一种提取含噪重叠信号中各单独峰峰位置的有效工具, 即使对于重叠程度和噪声干扰严重的信号也能得到较好的结果; 将其用于 Cd(Ⅱ )和 In(Ⅲ )重叠伏安信号的处理, 峰位置提取的相对误差小于± 1%; 该法具有准确、快捷、简便易行等特点, 发展前景广阔.     

基于提升格式的小波变换用于处理化学信号

将提升haar小波变换应用于对不同类型含高噪声化学信号的处理,提出1种用于高噪声化学信号中滤除噪声的快速新方法——提升小波滤噪法,并使之与重叠峰分辨技术联用;以优选的小波分解层数对低信噪比的分析化学信号进行基于提升格式的小波变换处理,取得满意的结果;方法简单、快捷、准确、易行．运算速度是传统小波变换的一半,对高噪声化学信号的处理结果信噪比提高几百倍,峰位置相对误差小于1．5％;应用于氨基酸体系毛细管电泳检测信号的处理,有效降低了实验噪声的影响,分辨提取了难以察觉的信号．结果峰形变窄,峰高增加．大大提高了峰的分辨率．验证和显示了方法的可行性和优越性。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.