Aggregation behavior of naphthalimide fluorescent surfactants in aqueous solution

A group of novel fluorescent surfactants, N-n-alkyl-4-(1-methylpiperazine)-1,8-naphthalimide iodine [C_nndi]I (n?=?8, 10, and 12), have been synthesized and their aggregation behavior in aqueous solution have been explored by surface tension, electric conductivity, hydrogen-1 NMR spectra, absorption, and fluorescence spectra. Compared with traditional cationic surfactants, the [C_nndi]I have a rather lower critical micelle concentration and higher surface activity. Absorption and fluorescence spectra were proved to be facile method to monitor directly the aggregation states of fluorescent surfactant molecules in solution and revealed clearly the formation of face-to-face stacked structure of the [C_nndi]I molecules driven by the π–π interactions. The micelle formation process for [C_nndi]I was demonstrated to be enthalpy-driven in the temperature range investigated. Possible aggregation process was given based on the experimental results. The combination of dye and surfactant provides a way for monitoring the formation process of micelle directly by fluorescence spectra.     

Aggregation behavior of gemini surfactants and their interaction with macromolecules in aqueous solution

Gemini surfactants are constructed by two hydrophobic chains and two polar/ionic head groups covalently connected by a spacer group at the level of the head groups. Gemini surfactants possess unique structural variations and display special aggregate transitions. Their aggregation ability and aggregate structures can be more effectively adjusted through changing their molecular structures compared with the corresponding monomeric surfactants. Moreover, gemini surfactants exhibit special and useful properties while interacting with polymers and biomacromolecules. Their strong self-aggregation ability can be applied to effectively influence the aggregation behavior of both polymers and biomacromolecules. This short review is focused on the performances of gemini surfactants in aqueous solutions investigated in the last few years, and summarizes the effects of molecular structures on aggregation behavior of gemini surfactants in aqueous solution as well as the interaction of gemini surfactants with polymers and biomacromolecules respectively.     

Aggregation properties of cationic gemini surfactants with partially fluorinated spacers in aqueous solution

The aggregation properties of cationic gemini surfactants alkanediyl-alpha,omega-bis(dodecyldimethylammonium bromide), [C(12)H(25)(CH(3))(2)N(CH(2))(m)(CF(2))(n)(CH(2))(m))N(CH(3))(2)C(12)H(25)]Br(2) [where 2m + n = 12 and n = 0, 4, and 6; designated as 12-12-12, 12-12(C(4)(F))-12, and 12-12(C(6)(F))-12, respectively] have been studied by microcalorimetry, time-resolved fluorescence quenching, and electrical conductivity. Compared with a fully hydrocarbon spacer of 12-12-12, the fluorinated spacer with a lower ratio of CF(2) to CH(2) in 12-12(C(4)(F))-12 tends to disfavor the aggregation, leading to larger critical micelle concentration (cmc), lower micelle aggregation number (N), and less negative Gibbs free energy of micellization (DeltaG(mic)). However, the fluorinated spacer with a higher ratio of CF(2) to CH(2) in 12-12(C(6)(F))-12 may prompt the aggregation, resulting in lower cmc, higher N, and more negative DeltaG(mic). It is also noted that enthalpy change of micellization (DeltaH(mic)) for 12-12(C(4)(F))-12 is the most exothermic, but the values of DeltaH(mic) for 12-12-12 and 12-12(C(6)(F))-12 are almost the same. These results are rationalized in terms of competition among the enhanced hydrophobicity and the rigidity of the fluorinated spacer, and the variation of immiscibility of the fluorinated spacer with the hydrocarbon side chains.     

Aggregation behavior of imidazolium-based chiral surfactant in aqueous solution

A novel imidazolium-based chiral surfactant with a Y-type hydrophobic chain, (S)-(+)-1-(2,3-bis(octanoyloxy)propyl)-3-methylimidazolium chloride ([Bopmim]Cl), was synthesized. The aggregation behavior of [Bopmim]Cl in aqueous solution was then investigated by surface tension, electrical conductivity, ¹H NMR, and fluorescence measurements. Compared with [C₁₂mim]Cl, the critical micelle concentration for [Bopmim]Cl is lower, indicating that the novel chiral surfactant has superior capacity to form micelles. A larger value of pC ₂₀, a greater minimum area per surfactant molecule (A _min), a smaller degree of counterion binding (β), and a looser aggregate are caused by the relatively larger Y-type hydrophobic chain of [Bopmim]Cl. Furthermore, analysis of the ¹H NMR spectra revealed that the introduced Y-type hydrophobic chain may prevent the hydrophobic group from forming an extended chain configuration and cause a changeover from trans to gauche conformations upon micellization. The micelles of the novel chiral surfactant may provide some potential applications in the stereochemical recognition of surfaces or of biological structures.     

Interaction of DNA fragments with counterions in aqueous solution

Monte Carlo simulation of the hydration of metal ion—DMP⁻ and metal ion—9-methylguanine complexes was performed. A comparative analysis of the results for Na⁺ and K⁺ ions was carried out. The main stages of dissociation were revealed. The energy effects of dissociation were evaluated. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2174–2177, November, 1998.     

Aggregation and adsorption of sodium dioctylsulfosuccinate in aqueous ammonium chloride solution: role of mixed counterions

The critical micelle concentration (cmc) of sodium dioctylsulfosuccinate (AOT) was determined at 25 °C from surface tension and fluorescence methods in aqueous NH(4)Cl solution for assessing the influence of mixed counterions on the special counterion binding behavior (SCB) of AOT. The SCB of AOT refers to a sudden twofold increase in the value of the counterion binding constant (β) in aqueous medium when the concentration (c(*)) of the added 1:1 sodium salt is about 0.015 mol kg(-1), and it has been tested so far for sodium ion only. In the presence of sodium and ammonium mixed counterions also the SCB of AOT exist, but with lower c(*) (0.009 mol kg(-1) NH(4)Cl). Synergism in the cmc occurs due to mixed counterions. In the case of inorganic counterions, unlike the case with organic counterions, the cmc is dependent on the total counterion concentration in solution and negligibly on the specific type of counterion. Na(+) and NH(4)(+) bind almost equally to the micelle in the region of low β (below c(*)), but in the region of high β (above c(*)) NH(4)(+) binds predominantly. It has been shown that the theoretical expression for the surface excess of ionic surfactant+electrolyte system containing a single counterion can also be used to evaluate the surface excess in the presence of mixed counterions if the two counterions are considered to undergo Henry-type adsorption at the air-solution interface.     

Aggregation behavior of long-chain N-aryl imidazolium bromide in aqueous solution

The aggregation behavior of three long-chain N-aryl imidazolium ionic liquids (ILs), 1-(2,4,6-trimethylphenyl)-3-alkylimidazolium bromide [C(n)pim]Br (n = 10, 12, and 14), in aqueous solutions was systematically explored by surface tension, electrical conductivity, and (1)H NMR. A lower critical micelle concentration (cmc) for the N-aryl imidazolium ILs is observed compared with that for 1,3-dialkylimidazolium ILs [C(n)mim]Br, indicating that the incorporation of the 2,4,6-trimethylphenyl group into a headgroup favors micellization. The enhanced π-π interactions among the adjacent 2,4,6-trimethylphenyl groups weaken the steric hindrance of headgroups and thus lead to a dense arrangement of [C(n)pim]Br molecules at the air-water interface. An analysis of the (1)H NMR spectra revealed that the introduced 2,4,6-trimethylphenyl group may slightly bend into the hydrophobic regions upon micellization. The micelle formation process for [C(n)pim]Br (n = 10, 12, and 14) was found to be enthalpy-driven in the investigated temperature range, which is attributed to the strong electrostatic self-repulsion of the headgroups and the counterions as well as the π-π interactions among headgroups. Strong, stable fluorescence properties are presented by the new N-aryl imidazolium ILs, indicating their potential application in the field of photochemistry.     

Aggregation behavior of star-like PEO-PPO-PEO block copolymer in aqueous solution

The aggregation behavior of a star-like amphiphilic block copolymer (denoted as AP432, which was synthesized via anionic polymerization), in aqueous solutions was investigated by surface tension, steady-state fluorescence, dynamic light scattering (DLS) and transmission electron microscopy (TEM). For comparison, a commercially available linear amphiphilic PEO-PPO-PEO block copolymer, Pluronics L64, which has a similar PEO fraction to AP432, was also studied. It is found that the different molecular structure of AP432 and L64 leads to a significant difference on their behavior both at the air/water interface and in bulk aqueous solutions. The results of surface tension measurements indicate that the surface activity of AP432 is much more pronounced than that of L64. The formation of AP432 and L64 aggregates are identified by DLS, fluorescence and TEM measurement.     

Emission behavior of 1-methylaminopyrene in aqueous solution of anionic surfactants

A new fluorescent probe, methylamino derivative of pyrene, has been considered to characterize the concentration dependent emission behavior of an aqueous solution of anionic surfactants, viz., SDS, DSS, and SDBS. It was found that the emission of the probe is uniquely sensitive to the changes in surfactant (anionic) concentration due to the functional group effect of the probe over the parent moiety, pyrene. Here, 1-methylaminopyrene (MAP) showed significant quenching of emission well below the critical micellar concentration (cmc) of the surfactant. Excimer emission of the probe due to the formation of premicellar aggregates of the surfactant solutions at a concentration close to but below the cmc and again an enhanced emission of the probe above the cmc were observed as a consequence of definite MAP-surfactant interactions. These observations assisted the possible quantification ofsurfactant concentrations and their chain length dependent premicellar aggregate formations. Significant monomer emission in relation to probe distribution in micelle was analytically authenticated. Dynamic light scattering (DLS) studies revealed the incorporation of the probe molecules in the micellar core. The fluorophore emission showed nonlinear behavior when the surfactant concentration was far above the cmc. Abrupt changes in the emission characteristics in relation to the micellar concentration led to the determination of the cmc of the surfactants.     

Aggregation and adsorption behavior of low concentration aqueous solutions of hexadecyltrimethylammonium ortho, meta, and parafluorobenzoate

The aggregation properties of 2-, 3-, and 4-fluorobenzoic acids (2FBA, 3FBA, and 4FBA, respectively) and their salts with hexadecyltrimethylammonium cations (HTA2FB, HTA3FB, and HTA4FB) in water were studied with a battery of techniques. Their activity at the air/solution interface has been also studied. The position of the fluorine atom in the acid affected the solubility, adsorption, and aggregation in the pure acids solutions. The 4FBA is less water soluble, more hydrophobic, and has the lower critical aggregation concentration of the three isomers. The behavior of the HTA2FB compound in aqueous solution is different from that of HTA3FB and HTA4FB. The critical micelle concentration, critical concentration for sphere-to-rod-like micelle transition, and Krafft point of HTA3FB and HTA4FB are lower than those of the other surfactant but their surface activities are higher. The differences between the HTA2FB and the other two surfactants have been explained on the basis of the regular solution theory of mixed micelles and in light of the analysis of the hydration shell of the acids through molecular dynamic simulations. The results of the present work suggest that the different behaviors are due to a combination of different dehydration tendencies and the steric possibility of inclusion of the counterions in the micelle palisade layer. The formation of rod-like micelles by HTA2FB, while the tetradecyltrimethylammonium 2-fluorobenzoate only forms spherical aggregates, is explained on the basis of the packing parameter. The mentioned factors are complementary to others presented in literature. These conditions may be used in the rational design of micelles by means of molecular dynamics simulations, reducing the trial-and-error approach used to date.     

Aggregation behavior of p-n-alkylbenzamidinium chloride surfactants

The aggregation behavior of a novel class of surfactants, p-n-alkylbenzamidinium chlorides, has been investigated. The thermodynamics of aggregation of p-n-decylbenzamidinium chloride mixed with cationic and anionic cosurfactants has been studied using isothermal titration calorimetry. For mixtures of p-n-decylbenzamidinium chloride with n-alkyltrimethylammonium chlorides, the aggregation process is enthalpically more favorable than for the pure n-alkyltrimethylammonium chlorides, probably caused by diminished headgroup repulsion due to charge delocalization in the amidinium headgroup. A critical aggregation concentration between 3 and 4 mM has been extrapolated for p-n-decylbenzamidinium chloride at 40 degrees C, around two times lower than that of similar surfactants without charge delocalization in the headgroup and well comparable to that of similar surfactants with charge delocalization in the headgroup. In mixtures of p-n-decylbenzamidinium chloride with either sodium n-alkylsulfates or sodium dodecylbenzenesulfonate, evidence is found for the formation of bilayer aggregates by the pseudo-double-tailed catanionic surfactants composed of p-n-decylbenzamidinium and the anionic surfactant. These aggregates are solubilized to mixed micelles by excess free anionic surfactant at the measured critical aggregation concentration.     

Aggregation behavior of polypropylene oxide with electric charges at both ends in aqueous solution

The aggregation behavior of polypropylene oxide (PPO) with positive charges at both ends was investigated in aqueous solution by means of the measurements of solution turbidity, dynamic light-scattering, differential scanning calorimetry, and dye solubilization. The positive charges were produced by protonation of terminal NH(2) groups attached to the polymer composed of 33 PO units. It was found that the aggregation behavior is quite sensitive to temperature. At low temperature, the polymer dissolves in water as a unimer. When temperature is increased, the unimer solution undergoes a phase separation to give a turbid solution. Further increase in temperature produces a transparent micellar solution. The aggregation of the polymer molecules must be induced by the dehydration of PPO chain caused by temperature increase. According to the analysis of heat absorptions associated with the melting of the solid mixture and the phase separation of the unimer solution, it is suggested that approximately 10% dehydration of PPO chain causes the phase separation. The temperature-composition phase diagram of aqueous mixture of this polymer was constructed on the basis of turbidity and DSC experiments, which reveals the aggregation behavior of this polymer in aqueous medium as a function of concentration and temperature.     

Tetrabutylammonium alkyl carboxylate surfactants in aqueous solution: self-association behavior, solution nanostructure, and comparison with tetrabutylammonium alkyl sulfate surfactants

A series of long and ultralong chain tetrabutylammonium alkyl carboxylate (TBACm, TBA = tetrabutylammonium ion; Cm = carboxylate ion C(m-1)H(2)(m-1)CO(2)(-) of total carbon number m) surfactants have been obtained by direct neutralization of the fatty acids with m = 12, 14, 18, 22, and 24 by tetrabutylammonium hydroxide. Time-resolved fluorescence quenching has been used to determine the micelle aggregation number (N) of the surfactants with m = 12, 14, and 18 in the temperature range 10-50 degrees C and of the surfactants with m = 22 and 24 in the temperature range 25-60 degrees C. In all instances the values of N were well below those that can be calculated for the maximum spherical micelle formed by surfactants with the same alkyl chain as the investigated surfactants on the basis of the oil drop model for the micelle core. The microstructure of selected solutions of TBAC22 was examined using transmission electron microscopy at cryogenic temperature and compared to the microstructure of solutions of TBA dodecyl and tetradecyl sulfates. These observations generally confirmed the findings of TRFQ. The self-association behavior of these anionic surfactants with TBA counterions is explained on the basis of the large size and the hydrophobicity of the tetrabutylammonium ions. The important differences in behavior that have been evidenced between tetrabutylammonium alkyl carboxylates and alkyl sulfates are discussed in terms of differences in distribution of the surfactant electrical charge on the headgroup and alkyl chain predicted by quantum chemical calculations (Langmuir 1999, 15, 7546).     

Aggregation behavior of nitrophenoxy-tailed quaternary ammonium surfactants

Cationic surfactants N,N,N-trimethyl-10-(4-nitrophenoxy)decylammonium bromide (N10TAB) and N,N,N',N'-tetramethyl-N,N'-bis[10-(4-nitrophenoxy)decyl]-1,6-hexanediammonium dibromide (N10-6-10N), bearing aromatic nitrophenoxy groups in the ends of their hydrophobic chains, have been synthesized, and their self-assembling properties in aqueous solutions have been studied by conductivity, isothermal titration microcalorimetry, 1H NMR spectroscopy, and dynamic light scattering. Below the critical micelle concentration, N10-6-10N can form premicelles with 2 or 3 surfactant molecules. Beyond the critical micelle concentration, the two surfactants have strong self-aggregation ability and can form micelles of rather small size and with small aggregation numbers N, which are 30 +/- 3 for N10TAB and 20 +/- 2 for N10-6-10N, respectively. Also, the variations in 1H NMR signals at different surfactant concentrations provide the information on the environmental change of the surfactants upon their micellization progress. The most prominent phenomenon is the shielding effect of the aromatic groups over the protons in the aliphatic chains, implying that the nitrophenoxy groups partially insert into the micelles and face the several middle methylenes of the hydrophobic side chains.     

Aggregation behavior in mixed system of double-chained anionic surfactant with single-chained nonionic surfactant in aqueous solution

The aggregation behavior of mixed systems of sodium bis(2-ethylhexyl) sulfosuccinate (AOT) or sodium bis(4-phenylbutyl) sulfosuccinate (SBPBS) with nonionic surfactant pentaethylene glycol mono-n-dodecyl ether (C12E5) have been studied by means of steady-state fluorescence, electrical conductivity, dynamic light scattering, transmission electron microscopy, electrophoretic light scattering and pyrene solubilization measurements. The critical concentrations for aggregation, micropolarity, mobility, solubilization capacity and morphology of aggregates are characterized. Two critical concentrations for aggregation are observed in the mixed surfactants, which may correspond to the formation of different kinds of aggregates. Moreover, it is more favorable for AOT-C12E5 to form mixed vesicles compared to SBPBS-C12E5 at higher mole fraction of C12E5. In addition, it is revealed that SBPBS-C12E5 mixture has larger solubilization capacity for pyrene than AOT-C12E5 system.     

Interactional and aggregation behavior of twin tail cationic surfactants with pluronic L64 in aqueous solution

The aqueous mixed systems of twin tail cationic surfactants didodecyldimethylammonium bromide, ditetradecyldimethylammonium bromide, and dihexadecyldimethylammonium bromide with pluronic L64 have been studied to determine the bulk aggregation and interactional behavior. Various experimental techniques, namely small-angle neutron scattering (SANS), fluorescence, conductivity, and surface tension, have been employed to investigate the mixed micellization. The SANS data analysis has been employed to determine the shapes of different aggregates formed. Pure twin tail cationic surfactants form vesicles whereas the micelles of pure pluronic L64 are spherical. The mixed systems (surfactant + L64) also form spherical micelles, and the spherical shape of mixed micelles is predominantly controlled by pluronic L64. Various interfacial parameters such as surface excess (Γ _max), minimum area per molecule (A _min), and thermodynamic parameters such as the standard Gibbs free energy of micellization (DG_mic⁰ \Delta G_{{mic}}^{{0}} ), Gibbs free energy of adsorption (DG_ads⁰ \Delta G_{{ads}}^{{0}} ), and effective Gibbs free energy (DG_eff⁰ \Delta G_{{eff}}^{{0}} ) have been determined from the surface tension measurements. The results were interpreted on the basis of pseudophase separation model and regular solution theory. The interactions of each surfactant with pluronic L64 are found to be nonideal and antagonistic. The repulsive nature of the interaction is explained on the basis of the changes in the microenvironment of micelles of pluronic L64. Micelles of pluronic L64 are less hydrophobic and contains significant amount of water, and inclusion of hydrophobic alkyl chains of twin tail cationic surfactants disturbs this microenvironment of pluronic L64 micelle.     

表面活性剂水溶液中芘的激基缔合物形成

在离子型和非离子型表面活性剂水溶液中观察到了芘的激基缔合物荧光, 其荧光强度与单体荧光强度比值对表面活性剂浓度的关系曲线中有一峰值。指出表面活性剂单体分子在水溶液中呈绕曲状构型, 对应上述峰值的表面活性剂浓度为其临界胶束浓度。     

Salt effects on the aggregation behavior of tripolar zwitterionic surfactants with different inter-charge spacers in aqueous solution

Salt effects on the aggregation behavior of tripolar zwitterionic surfactants in aqueous solutions have been investigated using surface tension, dynamic light scattering (DLS), freeze-fracture transmission electron microscopy (FF-TEM), and ¹H NMR. The tripolar zwitterionic surfactants with different inter-charge spacers are [C₁₄H₂₉(CH₃)₂N⁺C_sN⁺(CH₃)₂CH₂CH₂CH₂SO₃ ^?]Br^? (C₁₄C_sTri, C_s?=?–(CH₂)₂–, –(CH₂)₆–, –(CH₂)₁₀–, and p-xylyl). It is found that the critical micelle concentration (CMC) values of the corresponding traditional zwitterionic surfactant C₁₄H₂₉(CH₃)₂N⁺CH₂CH₂CH₂SO₃ ^? (TPS) are almost constant with the increase of the NaBr concentration. However, the CMC values of C₁₄C_sTri decrease sharply at a lower NaBr concentration and then level off at a higher NaBr concentration. Moreover, the decreasing extents of the CMC values for C₁₄C₂Tri, C₁₄C₆Tri, and C₁₄C_pxTri are very close, but more significant than that for C₁₄C₁₀Tri, suggesting that the self-assembly ability of the tripolar zwitterionic surfactants with a longer inter-charge spacer is less sensitive to NaBr. The DLS and FF-TEM results reveal that C₁₄C₂Tri, C₁₄C₆Tri, and C₁₄C_pxTri form micelles without NaBr and that the size slightly increases with the increase of NaBr concentration, whereas micelles and vesicles coexist for C₁₄C₁₀Tri and TPS without NaBr and then transfer to micelles upon the addition of NaBr. The salt-induced morphological transition for C₁₄C₁₀Tri is further studied using ¹H NMR. The addition of NaBr reduces both the electrostatic repulsion between the same charged ammoniums and the electrostatic attraction between the oppositely charged ammonium and sulfonate. Thus, the longer inter-charge spacer of C₁₄C₁₀Tri tends to be more bended and the sulfonate group becomes available to contact the ammonium, which promotes micellization.     

Effects of alcohols and counterions on the phase behavior of 1-octyl-3-methylimidazolium chloride aqueous solution

Phase behavior of ternary systems involving 1-octyl-3-methylimidazolium chloride ([C8mim]Cl), water, and different alcohols (1-hexanol, 1-octanol, 1-decanol, and 1-dodecanol) is investigated at 25 degrees C. With the use of polarized optical microscopy and small-angle X-ray scattering techniques, lyotropic lamellar phases (Lalpha) are identified in all systems, the formation of which is considered as a synergetic result of the hydrophobic force and the hydrogen-bonded network comprising an imidazolium ring, Cl-, water, and alcohols. In these Lalpha phases, alcohol molecules play important roles not only because they could partly penetrate into the palisade layer with their hydroxyl groups extruded to form the network at the aggregate interface, but also because they could partly locate themselves in the interior of the hydrophobic bilayers to twist with the alkyl chains of [C8mim]Cl. Influencing factors such as the carbon chain length and content of different alcohols on these Lalpha phases are discussed. With comparison to analogous ternary systems of [C8mim]BF4 and [C8mim]PF6, it is found that the strong interaction between counterions and alcohols favors the appearance of ordered assemblies.