质子放射性寿命的新规律

对球形核和变形核质子放射性的半衰期进行了系统的分析和研究,提出了新的计算质子放射性寿命的解析公式。 通过对公式计算寿命和实验测量值的系统比较,发现两者之间符合得非常好,说明新公式十分准确并具有良好的预言能力。 Systematic calculations on proton radioactivity half lives of both spherical and deformed nuclei are carried out. A new formula with only four parameters is proposed for proton radioactivity half lives. The half lives calculated by using the new formula are in good agreement with the experimental ones. The new formula is simple but accurate, which is very useful for further experiments.     

近垒能量下重核熔合几率的量子路径积分计算

针对近垒能量下经典涨落耗散模型预期的重核熔合几率比实验结果偏小的问题, 发展了一种实时间路径积分方法并用于研究重核熔合激发函数, 给出了包含量子涨落效应的解析表达式。 计算了几个对称和近似对称反应系统的熔合几率, 结果表明理论结果与实验值符合较好。 还讨论了颈部增长对熔合障碍的影响。 A real time path integral approach is developed in order to work out a correct solution to a problem for the smaller result of the fusion probability of heavy nuclei based on the classical diffusion model at sub barrier energies. An analytical expression for the quantum fusion probability is proposed,which contains the quantum fluctuation effect. The fusion probabilities of several symmetrical and approximate symmetrical systems are calculated, the heoretical results are in agreement with the experimental data. The influence of the neck length and its fluctuation upon the fusion hindrance is discussed.     

An interconnecting bus power optimization method combining interconnect wire spacing with wire ordering

On-chip interconnect buses consume tens of percents of dynamic power in a nanometer scale integrated circuit and they will consume more power with the rapid scaling down of technology size and continuously rising clock frequency, therefore it is meaningful to lower the interconnecting bus power in design. In this paper, a simple yet accurate interconnect parasitic capacitance model is presented first and then, based on this model, a novel interconnecting bus optimization method is proposed. Wire spacing is a process for spacing wires for minimum dynamic power, while wire ordering is a process that searches for wire orders that maximally enhance it. The method, i.e., combining wire spacing with wire ordering, focuses on bus dynamic power optimization with a consideration of bus performance requirements. The optimization method is verified based on various nanometer technology parameters, showing that with 50% slack of routing space, 25.71% and 32.65% of power can be saved on average by the proposed optimization method for a global bus and an intermediate bus, respectively, under a 65-nm technology node, compared with 21.78% and 27.68% of power saved on average by uniform spacing technology. The proposed method is especially suitable for computer-aided design of nanometer scale on-chip buses.     

The power spectrum and correlation of flow noise for an axisymmetric body in water

Understanding the physical features of the flow noise for an axisymmetric body is important for improving the performance of a sonar mounted on an underwater platform. Analytical calculation and numerical analysis of the physical features of the flow noise for an axisymmetric body are presented and a simulation scheme for the noise correlation on the hydrophones is given. It is shown that the numerical values of the flow noise coincide well with the analytical values. The main physical features of flow noise are obtained. The flow noises of two different models are compared and a model with a rather optimal fore-body shape is given. The flow noise in horizontal symmetry profile of the axisymmetric body is non-uniform, but it is omni-directional and has little difference in the cross section of the body. The loss of noise diffraction has a great effect on the flow noise from boundary layer transition. Meanwhile, based on the simulation, the noise power level increases with velocity to approximately the fifth power at high frequencies, which is consistent with the experiment data reported in the literature. Furthermore, the flow noise received by the acoustic array has lower correlation at a designed central frequency, which is important for sonar system design.     

Impulsive control for Takagi--Sugeno fuzzy model with time-delay and its application to chaotic system

A control approach where the fuzzy logic methodology is combined with impulsive control is developed for controlling some time-delay chaotic systems in this paper. We first introduce impulses into each subsystem with delay of the Takagi--Sugeno (TS) fuzzy IF--THEN rules and then present a unified TS impulsive fuzzy model with delay for chaos control. Based on the new model, a simple and unified set of conditions for controlling chaotic systems is derived by the Lyapunov--Razumikhin method, and a design procedure for estimating bounds on control matrices is also given. Several numerical examples are presented to illustrate the effectiveness of this method.     

Design of anisotropic reflector with birefringent thin films

A novel design for dielectric anisotropic mirrors with birefringent thin films for normal incidence is presented. This mirror consists of a stack of quarter-wave biaxial layers. The biaxial anisotropic layers can be fabricated by oblique deposition. The reflectance is different for two linear polarizations of light incidence on the mirrors. As a numerical example, the design is carried out on glass with TiO2 and ZrO2. These thin films could be applied to anisotropic reflective devices for lasers.     

HIRFL上的中、低能重离子物理基础和应用研究

本文简介HIRFL上中、低能重离子物理基础和应用研究的主要进展;着重介绍三个方面的研究:中能HIC和热核性质的研究,远离稳定线核的合成和研究,重离子束应用,并概述近期实验研究规划的初步建议。 The experimental studies and achievements recently made at the Heavy Ion ResearchFacility of Lanzhou(HIRFL) are reviewed with an emphasis on the three research fields: the study of intermediate energy heavy ion collision and properties of hot nuclei, the synthesis and study of nucleifar from stability, and the applications of heavy ions. A research program for the near future is alsobriefly introduced.     

Analytical base–collector depletion capacitance in vertical SiGe heterojunction bipolar transistors fabricated on CMOS-compatible silicon on insulator

The base--collector depletion capacitance for vertical SiGe npn heterojunction bipolar transistors (HBTs) on silicon on insulator (SOI) is split into vertical and lateral parts. This paper proposes a novel analytical depletion capacitance model of this structure for the first time. A large discrepancy is predicted when the present model is compared with the conventional depletion model, and it is shown that the capacitance decreases with the increase of the reverse collector--base bias--and shows a kink as the reverse collector--base bias reaches the effective vertical punch-through voltage while the voltage differs with the collector doping concentrations, which is consistent with measurement results. The model can be employed for a fast evaluation of the depletion capacitance of an SOI SiGe HBT and has useful applications on the design and simulation of high performance SiGe circuits and devices.     

Quantum reflection as the reflection of subwaves

This paper studies quantum reflection with recent research on reflection coefficient. Based on the analytical transfer matrix method, a novel explanation for this phenomenon is proposed that quantum reflection is the reflection of subwaves, which originate inherently from the inhomogeneity of the fields and is always neglected in the semiclassical regime. Comparison with exact formula and the numerical calculations for different potentials has confirmed the reliability and the validity of the proposed theory.     

Development of MEMS-based micro capacitive tactile probe

In this paper, a micro capacitive sensor with nanometer resolution is presented for ultra-precision measurement of micro components, which is fabricated by the MEMS （micro electromechanical systems） non-silicon technique. Based on the sensor, a micro capacitive tactile probe is constructed by stylus assembly and packaging design for dimension metrology on micro/nano scale, in which a data acquiring system is developed with AD7747. Some measurements of the micro capacitive tactile probe are performed on a nano positioning and measuring machine （NMM）. The measurement results show good linearity and hysteresis with a range of 11.6 μm and resolution of better than 5 nm. Hence, the micro capacitive tactile probe can be integrated on NMM to realize measurement of micro structures with nanometer accuracy.     

Extreme nuclear deformations studied at the GASP spectrometer

Very exotic shapes can be assumed for the nuclei at high angular momenta. Their study has become possible with the advent of the last generation high-resolution γ-ray spectrometers. In this talk results are presented on superdeformed nuclei of theA=140 mass region where a detailed spectroscopy in the second minimum is now possible. Hyperdeformed rotational bands, expected in the third minimum, lie at even higher spins where their observation is very difficult from the experimental point of view. We have up to now only weak signals of their presence. The status of the search for hyperdeformation in¹⁵²Dy is reported.     

The theory of SERS on semiconductor and dielectric substrates

It is demonstrated that the reason for SERS on dielectric and semiconductor substrates is enhancement of the electric field in the regions of the tops of surface roughness with a very small radius or a very large curvature. The enhancement depends on the dielectric constant of the substrate and is stronger for a larger dielectric constant. It is indicated that the enhancement on dielectrics and semiconductors is weaker than on metals with the same modulus of the dielectric constant. The result obtained is confirmed by experimental data on the enhancement coefficients obtained for various semiconductor and dielectric substrates.     

基于节点重构的扩散方程有限体积格式

研究扭曲网格上扩散方程的九点格式.以经典的九点格式为基础,在通量连续条件下,构造出节点未知量一种新的计算方法,进而得到所希望的格式.分析及数值实验表明,在扭曲网格上,该格式对具有连续或间断扩散系数的问题能够保持较高的精度.     

二维不规则形状发热型缺陷的红外识别算法

对带有自身发热型缺陷的试件建立二维传热模型,利用有限元法进行求解,研究试件表面的温度分布规律,并根据共轭梯度法提出根据试件外表面红外测温,定量识别发热型内部缺陷边界轮廓的方法.数值实验证明了算法的有效性.对所研究缺陷类型,导热系数较小的试件识别精度较高;温度测量误差、测温点数目及缺陷轮廓初值假设对识别结果的影响可以忽略;检测表面最大温差越大,识别精度越高.     

使用界面追踪对膜态沸腾的数值研究

提出一种计算带相变的自由界面的数值算法.基于分段线性界面重构(PLIC)的VOF(volume-of-fluid)方法用于追踪自由界面,并对汽液交界面上的相变导致的不连续速度场给出处理方法.此方法容易实施且被证明是有效的.流场的求解使用SIMPLE方法,表面张力使用连续表面力模型(CSF)进行计算.在三维直角坐标系下,模拟了水平壁面上的膜态沸腾,在二维适体坐标系下,模拟了竖直圆头柱体表面的自然对流膜态沸腾.计算结果与理论关系式符合较好.     

多值测试诊断策略优化设计

针对电子系统中多值测试条件下的测试排序问题,提出了一种诊断策略优化方法。首先,以相关性矩阵模型为基础,将已有的二值测试的优化算法同多值测试问题相结合,提出了适用于多值测试的基于霍夫曼编码的启发式函数;其次,将平均测试代价最小和平均测试步骤最少作为优化目标,采用与或树启发式搜索算法生成诊断树,得到多值测试的诊断策略,并给出了诊断策略优化方法的具体实现步骤;最后,将其应用到航空设备的实例中。结果表明提出的基于霍夫曼编码的与或树启发式搜索算法是可行的,其生成的诊断树是最优的,比基于信息熵的与或树启发式搜索算法具有更小的平均测试代价和更少的平均测试步骤。     

Creating planar electrode systems for biosensors

A planar topology for a nanoelectronic transducer based on glucose oxidase is designed for use in an enzymatic biosensor. Electromigration is used to create 5-nm gaps in Au nanowires. A method for the chemical modification of a silica surface with epoxysilane is developed and glucose oxidase is immobilized on the surface of a support by means of linking molecules. A technique for biochemical signal registration is developed. The eelectric response of the biosensor with glucose in a test solution and the dependence of this response on the glucose concentration are investigated.     

Load characteristics of high power sandwich piezoelectric ultrasonic transducers

Based on the equivalent circuit theory, the load characteristics of high power piezoelectric ultrasonic sandwich transducers are studied. Two types of loads are studied. One is liquid load as in ultrasonic cleaning, and the other is solid load as in ultrasonic drilling and machining. The effect of load and structure of the transducer on the resonance frequency of the transducer is analyzed. It is shown that the effect of load on the resonance frequency of sandwich transducers with different structures is different. For liquid load as in ultrasonic cleaning, the effect of the load on the resonance frequency of the sandwich transducer with symmetrical structure is the largest. It is the smallest for the transducer with its displacement node in the back metal cylinder. For solid load as in ultrasonic drilling and machining, the effect of the load on the resonance frequency of the sandwich transducer with its displacement node in the front metal cylinder is the largest. It is also the smallest for the transducer with its displacement node in the back metal cylinder. On the other hand, for some applications, such as ultrasonic drilling, when the lateral dimension of the tool is much less than that of the transducer, its effect on the resonance frequency of the transducer is small. The conclusions are useful in designing vibrating systems for different ultrasonic applications.