中子源有源法核查技术研究

用有源 (主动 )方法研究了贫化铀组合系统的中子诱发裂变缓发中子探测技术 .在不同屏蔽和组合等条件下测量和比较了贫化铀系统的缓发裂变中子分布 ,进一步研究了实验系统的可核查性 .探讨了区分核与非核系统的方法. The technique for detecting the delayed neutrons from neutron induced fission in uranium systems was studied by using an active method with 3He proportional counting tube array and a 14 MeV D T neutron source. Under the conditions of different shielding and combination, the distributions of delayed fission neutrons from depleted uranium systems were measured and the reliability of the systems was studied. The method to distinguish a nuclear system from a non nuclear one was discussed.     

核磁共振技术在核材料及其湿度检测中的应用研究

核磁共振技术对核材料贮存环境的改善、核废料的长期安全管理具有非常重要的意义。在分析环境因素对铀、钚核材料贮存期间品质变化影响的基础上。探讨了核磁共振方法对核材料进行探测的技术,研究了核材料贮存中湿度的测量和水分子的迁移规律。Nuclear magnetic resonance（NMR） technology play an import role in improving nuclear material stockpile circumstances and long-term security management of nuclear waste materials. Based on analyzing the circumstance factor that influence the qualitative change of the nuclear material of uranium and plutonium during their stockpile, nuclear materials detection technology with NMR method was discussed, and at the same time, moisture measurement and the water molecule moving rule in nuclear materials during their stockpile were also studied with the same method in this paper.     

An improved method of unfolding neutron TOF spectrum for low ion temperature inertial confinement fusion

The fuel ion temperature in inertial confinement fusion can be determined from the neutron energy spectrum. For the implosion experiment with low neutron yield, and thus low signal-to-noise ratio, a new technique to unfold the neutron energy spectrum from the observed neutron time-of-flight signal is presented in this paper. This method uses a low-pass filter to remove noise from the signal with a threshold value determined by power spectrum analysis. This technique has been applied to the analysis of the observed neutron time-of-flight signals in the indirect drive implosion experiment conducted on Shenguang III prototype laser facility, and fuel ion temperatures of about 1.0 keV are obtained.     

Calculation of prompt fission neutron spectrum for 233U（n,f） reaction by the semi-empirical method

The prompt fission neutron spectra for the neutron-induced fission of 233U for low energy neutrons （below 6 MeV） are calculated using nuclear evaporation theory with a semi-empirical method, in which the partition of the total excitation energy between the fission fragments for the nth＋233U fission reactions is determined by the available experimental and evaluation data. The calculated prompt fission neutron spectra agree well with the experimental data. The proportions of high-energy neutrons of prompt fission neutron spectrum versus incident neutron energies are investigated with the theoretical spectra, and the results are consistent with the systematics. The semi-empirical method could be a useful tool for the prompt evaluation of fission neutron spectra.     

(n,γ)反应实验研究中的中子屏蔽设计

用射线全吸收型装置(Gamma-ray Total Absorption Facility,GTAF),可以对中子俘获反应截面进行高精度测量。为了降低实验本底,实验中需要对源中子进行准直和屏蔽,还要对被样品散射的中子进行吸收以减少它们进入探测器后所形成的干扰。采用MCNP对中子的准直器、屏蔽体和中子吸收体进行了模拟设计,中子准直屏蔽体材料选用含硼聚乙烯(BC4 的质量分数为3%) 和铅。准直孔直径为13 mm,长度为500mm,经准直后样品处中子束斑坪顶直径为21 mm。中子吸收体材料选用聚乙烯和碳化硼,吸收体球壳内腔半径30 mm,聚乙烯壳层厚度60 mm,碳化硼壳层厚度10 mm,被样品散射的中子经吸收体后衰减93.7%。Neutron capture cross section can be measured by Gamma-ray Total Absorption Facility (GTAF) with high precision. To reduce the background of experiments, the neutron source must be collimated and shielded, and the neutrons scattered from the sample must be absorbed to minimise interference after they go into the detector. The shield, collimator and absorber were simulated and designed with MCNP code. Boron-ontainingpolyethylene with 3% BC4 and lead are used as the materials for the neutron collimator and shield. The diameter of the collimating aperture is 13 mm, and the length of the collimator is 500 mm. After being collimated, the diameter of neutron beam plateau at the sample position is 21 mm. The neutron absorber is made of polyethylene and BC4, and the thickness of polyethylene shell and BC4 shell are 60 and 10 mm, respectively. The simulated result shows that neutrons scattered from the sample can decay 93.7% through the neutron absorber.     

Maxwellian Averaged Neutron Capture Cross Sections in 56Fe and 57Fe

Measurements of the keV-neutron capture cross sections and radiative γ-ray spectrum of 56Fe and 57Fe are performed based on a 7 Li（p,n）7 Be reaction neutron source. The incident neutron spectrum on a capture sample is measured by means of a time-of-flight （TOF） method with a 6Li-glass detector. The radiative capture 7-rays emitted from an iron CS Fe or 57 Fe） or standard gold （197Au） sample are detected by a large anti-Compton NaI（TI） spectrometer covered with a heavy shield. The capture yields of samples are obtained by applying a pulse-height weighting technique to the corresponding capture γ-ray pulse-height spectrum. The Maxwellian averaged neutron capture cross sections of 56Fe and 5T Fe are derived according to the present capture cross section results.     

启明星Ⅱ次临界非稳态热中子注量率测量

中子注量率及分布是反应堆的重要参数,本工作通过核数守恒在非稳态情况下的推导和求解,从理论上论证了次临界反应堆非稳态情况下中子注量率测量的可行性。将活化法和固体径迹法有机结合,利用固体径迹探测器标定活化片的测量数据,测量了启明星Ⅱ零功率装置的He-3管实验孔道内及反应堆外壁的中子注量率的分布,并与模拟计算结果进行了比较,利用MCNPX程序得到的模拟计算结果与实验结果的趋势一致,证明了该测量方法可以测量低通量的中子注量率,可实现反应堆不同时刻、不同位置的中子注量率测量,为CiADS技术的研发提供了实验数据与技术支撑。Neutron flux measurements were carried out at VENUS-Ⅱ lead-based zero power reactor by neutron activation method combined with solid-state nuclear track detectors (SSNTD). This experimental method was proposed based on the principle of nuclear number conservation when a foil was irradiated in an unsteady-state neutron field. By this method, thermal neutron flux distributions inside the He-3 duct were measured when VENUS-Ⅱ was operated under unsteady-state. The neutron flux distributions were also calculated with MCNPX code and were consistent with the experimental data. In addition, the neutron fluxes in the outer layer of VENUSⅡ were measured under steady-state. These results would benefit the further study of experimental methods for neutron flux measurement and provide important support for the design of CiADS.     

An improved method of unfolding neutron TOF spectrum for low ion temperature inertial confinement fusion

The fuel ion temperature in inertial confinement fusion can be determined from the neutron energy spectrum. For the implosion experiment with low neutron yield, and thus low signal-to-noise ratio, a new technique to unfold the neutron energy spectrum from the observed neutron time-of-flight signal is presented in this paper. This method uses a low-pass filter to remove noise from the signal with a threshold value determined by power spectrum analysis. This technique has been applied to the analysis of the observed neutron time-of-flight signals in the indirect drive implosion experiment conducted on Shenguang Ⅲ prototype laser facility, and fuel ion temperatures of about 1.0 keV are obtained.     

可移动式中子监测隐性爆炸物系统的初步探索与研究

瞬发γ中子活化分析技术具有快速、原位、不需取样、准确、灵敏度高且能够实时多核素在线分析的特点,因此该技术是监测隐性爆炸物,尤其是非金属类爆炸物的最有效手段之一.在国内外有不少科技工作者对中子法监测隐性爆炸物技术进行了大量的研究,并取得了一定的成绩.主要对中子技术探测地雷和隐性爆炸物的各种方法和技术路线进行讨论,对同位素镅铍中子源和14 MeV脉冲中子管活化分析方法进行了初步探索研究,并对可移动式系统的源探的几何布置进行了探讨.Because it can on line analyze many elements quickly and precisely without sampling and movement, prompt gamma neutron activation analysis is one of the most effective methods to monitor latent dynamite especially nonmetal. Many researchers studied the neutron detecting latent dynamite technique and get some achievements. This paper mainly discussed each method and technology route of neutron detecting landmine and latent dynamite, studied the Am Be isotope neutron source and 14 MeV pulse neutron tube activation analysis, and analyzed the geometrical layout of movable system.     

基于D-T紧凑型中子源的快中子照相准直屏蔽体设计及中子束特性模拟研究

中子照相是一种重要的无损检测技术,它能用于火工产品、毒品和核燃料元件等的检测。基于紧凑型D-T中子发生器,完成了一个用于快中子照相的准直屏蔽体系统（BSA）的物理设计。根据D-T中子源的能谱和角分布建立了中子源模型,采用MCNP4C蒙特卡罗程序,模拟了准直屏蔽体系统中中子和γ射线的输运,准直中子束相对于单位源中子的中子注量可以达到9.30×10-6 cm-2,准直中子束中主要是能量大于10 MeV的快中子;在设置的样品平面直径14 cm的照射视野范围,准直束中子注量的不均匀度为4.30%,准直束中中子注量与γ注量的比值为17.20,中子通量和中子注量比值J/Φ为0.992,说明准直中子束有好的平行性;准直屏蔽体外的泄露中子注量率与准直束中子注量率相比降低了2个量级。所设计的准直屏蔽体能满足快中子照相的要求。Neutron radiography is an important nondestructive testing technique. It can be used to detect the explosive devices, drug and the nuclear fuel element, etc. A beam-shaping-assembly (BSA) based on a compact D-T neutron generator is designed for fast neutron radiography in this paper. D-T neutron source model is constructed based on the neutron energy spectrum and angular distribution data. The transportation of neutron and γ-ray in the BSA is simulated using MCNP4C code. The neutron fluence of the collimated neutron beam with respect to the neutron source of the unit source is 9.30×10-6 cm-2. The collimated neutron beams is mainly fast neutrons with energies greater than 10 MeV. In the irradiation field range with a diameter of 14 cm, the neutron fluence uniformity of the collimated beam is 4.3%, the ratio of the neutron fluence to the gamma fluence in the collimated beam is 17.20, and the neutron flux and the neutron fluence ratio (J/Φ) is 0.992 which indicates that the collimated neutron beam has good parallelism. The leakage neutron fluence in outside of BSA is two orders of magnitude lower than that of the collimated neutron beam. The designed BSA can meet the need of fast neutron radiography.     

Uranium analysis by neutron induced fissionography method using solid state nuclear track detectors

In this study total twenty samples (eight reference materials and twelve sediment samples) were analysed for their uranium content which is in the range of 1–17 μg/g, by neutron induced fissionography (NIF) method using solid state nuclear track detectors (SSNTDs) in comparison with the results of neutron activation analysis (NAA), delayed neutron counting (DNC) technique or fluorometric method. It is found that NIF method using SSNTDs is very sensitive for analysis of uranium.     

基于JMCT软件的中子活化数值模拟程序的开发和检验北大核心CSCD

中子活化产物和辐射特征的数值模拟程序是研究材料活化效应的重要工具。在JMCT软件的基础上开发了具备材料中子活化效应模拟能力的数值模拟程序,并将其命名为“中子活化数值模拟程序”,旨在将其应用于军控核查、核安全等领域的研究中。对该程序在核弹头内部中子输运和活化计算的准确性进行了验证,发现该程序对核弹头内部中子输运和活化的计算精度优良。利用该程序研究了混凝土地面核素在裂变核材料的裂变中子辐照下的活化效应,计算结果进一步验证了中子活化数值模拟程序的功能。     

先进核能系统结构材料辐照性能研究

首先简要介绍第一代到先进的第四代核能系统的发展、与核能系统发展密切的抗辐照结构材料研发进展、第四代核能系统结构材料辐照性能研究新方法。第四代核能系统发展中,辐照引起材料性能退化是一个需要研究和解决的瓶颈问题。现有中子源都不能满足第四代核能系统结构材料高剂量中子辐照性能研究的要求。为此,发展了用于核能系统结构材料高剂量辐照性能快速检测加速器重离子辐照方法和第四代核能系统实际辐照工况模拟的重离子与氢和氦三束同时辐照新方法,文中进行了详细的介绍。最后介绍了中国原子能科学研究院核能系统结构材料辐照性能研究现状和近期发展计划。该院在HI-13串列加速器器上建立了多种不同用途的重离子辐照装置、三个独立加速器构成的重离子与氢和氦三束同时辐照实验平台,开展了一系列核能结构材料,例如国产改进型奥氏体钢、CLAM钢、1515钢、钽、钨等的辐照性能的系统测试和研究。为了更好地开展核能结构材料性能研究,从国外引进了一台超导直线加速器和一台可变能量重离子回旋加速器。结合现有2×13 MeV,2×1.7 MV串列加速器、30 MeV和100 MeV质子回旋加速器、高压倍加器,中国实验快堆、中国先进研究堆、微堆等,CIAE将建成一个比较完整和先进的核能系统结构材料辐照实验平台系统供国内外用户使用。This paper introduces briefly the development of nuclear energy systems from the GEN I to the advanced GEN IV, the progress of manufacturing radiation resistant materials associated with the development of nuclear energy systems and the new methods of investigating radiation properties of the structural materials for the GEN IV nuclear energy systems at first. Irradiation induced deterioration of materials properties is a bottle neck problem, which must be investigated and solved for the development of the GEN IV nuclear energy systems. Unfortunately, all the currently available neutron sources cannot meet the requirements of investigating radiation properties of structural materials irradiated by high dose neutron irradiation in the GEN IV nuclear energy systems. Therefore, two new methods of the accelerator heavy ion irradiation that simulates the high-dose neutron irradiation and the triple beam irradiation that mimics the real neutron irradiation environment in the GEN IV nuclear energy systems have been developed. These two methods are introduced in this paper. The present status of the study on radiation properties of structural materials for nuclear energy systems of the new generation and the near future development plan at China Institute of Atomic Energy (CIAE) are described also. The accelerator heavy ion irradiation facilities for different applications and the simultaneous triple beam irradiation platform with three separate accelerators or implanters have been established at the HI-13 tandem accelerator of CIAE. A series of structural materials for nuclear energy systems, such as the home-made modified austenic steel, CLAM steel, 1515 steel, Tantalum, Tungsten, etc. have been tested and investigated systematically. A superconducting linear accelerator and a variable energy heavy ion cyclotron have been imported from abroad for a better performance of the study. Combined with the currently existing facilities of 2×13 MeV and 2×1.7 MV tandem accelerators, 30 and 100 MeV proton cyclotrons, China experimental fast reactor, China advance research reactor, Miniature neutron source reactor, etc. a comprehensive and advanced system of experimental irradiation platform for structural materials of nuclear energy systems will be established in the near future for both domestic and foreign users.     

主动中子多重性铀质量测量模拟研究

中子多重性技术常用于测量和核查核材料,尤其针对具有较厚屏蔽的对象具有不可替代的优势。钚的自发裂变率较高,可以采用被动测量方法,目前已有多款不同的测量装置。然而铀材料的自发裂变率较低只能采用主动测量方法。现有的主动井型符合计数器（AWCC）能够进行主动中子多重性测量铀材料质量,但依然存在探测效率较低,Am-Li中子源产生偶然符合大等缺点。为提高铀材料测量的效率和精度,对主动中子多重性测量方法开展深入研究非常必要。本文参考AWCC模型,利用Geant4软件对探测器和粒子的输运过程进行建模。研究了多重性移位寄存器的不同符合门宽、不同延迟时间对铀测量结果相对偏差的影响规律。计数器的最佳门宽为44 μs,门宽取值范围在计数器衰减时间的1.5倍左右合适;延迟时间大于3倍计数器衰减时间后,相对偏差显著减少。最后讨论了235U富集度变化对主动中子多重性测量结果的影响。为后续主动中子多重性铀质量测量仪器的设计提供了参考。     

中子散射成像探测角分辨研究

中子散射成像技术是近年来国外正在发展的一项新型辐射成像技术, 在深空宇宙探测、核材料监控等方面具有广阔的应用前景. 角分辨是衡量该技术成像能力的一项重要参数. 研究了位置不确定度和能量分辨对角分辨的影响. 理论分析表明: 以不同角度散射, 成像的角分辨不同; 位置不确定不仅直接影响角分辨, 还通过影响能量不确定度对角分辨间接贡献; 位置分辨主要来源于探测器的结构尺寸, 当探测器尺寸小于5 cm, 影响角分辨的主要来源是能量不确定度. 利用所获得的理论结果指导设计了原理探测系统, 并对设计的原理系统开展了初步实验研究. 结果表明, 分析结果与实验得到的角分辨参数基本一致.     

基于裂变γ标识技术的瞬发裂变中子谱测量新方法

瞬发裂变中子谱（prompt fission neutron spectrum,PFNS）是用于核实验诊断过程中十分重要的参数数据,传统的测量主锕系核素（U,Pu）PFNS的技术手段是采用裂变室,利用裂变碎片标识裂变中子,通过中子飞行时间技术获得裂变中子谱.目前出现了一种新的用于PFNS测量的技术,其原理是基于如下的物理事实：在一次裂变过程中,释放中子的同时伴随着释放7–8个γ射线光子,而非弹性散射效应产生的γ射线光子只有1–2个.据此,可以通过裂变γ射线的多重性将裂变中子和其他杂散中子甄选出来,达到测量PFNS的目的.本文建立了基于裂变γ标识技术的PFNS测量实验系统.利用该系统对²⁵²Cf中子源的PFNS进行了实验测量,测量结果与传统的裂变碎片标识法及ENDF/B-VⅡ数据库的标准谱进行了比较,对新方法的裂变标识率以及实验不确定度也一并进行了分析.     

Coded-aperture imaging systems: Past,present and future development – A review

Scintillator based coded-aperture imaging has proven to be effective when applied for X- and gamma-ray detection. Adaptation of the same method for neutron imaging has resulted in a number of propitious systems, which could be potentially employed for neutron detection in security and nuclear decommissioning applications. Recently developed scintillator based coded-aperture imagers reveal that localisation of neutron sources using this technique may be feasible, since pulse shape discrimination algorithms implemented in the digital domain can reliably separate gamma-rays from fast neutron interactions occurring within an organic scintillator. Moreover, recent advancements in the development of solid organic scintillators make them a viable solution for nuclear decommissioning applications as they present less hazardous characteristics than currently dominating liquid scintillation detectors. In this paper existing applications of coded-apertures for radiation detection are critically reviewed, highlighting potential improvements for coded-aperture based neutron source localisation. Further, the suitability of coded-apertures for neutron imaging in nuclear decommissioning is also assessed using Monte-Carlo modelling.     

B4C_Al材料中子吸收性能检测设备研制

当前基于燃耗信任制的乏燃料密集贮存方式,对乏燃料水池格架中子吸收材料的可靠性和有效性,都提出了更高的要求。在格架材料生产和使用过程中需要对其中子吸收性能(硼含量)进行无损检测和监测,针对这两个方面的需求,我们研制了核电厂乏燃料水池格架B₄C_Al中子吸收材料检测设备。该检测设备主要由中子源(3枚252Cf放射源)、中子探测器(10个锂玻璃组成的探测阵列)、中子屏蔽准直和慢化系统等组成,通过测量中子透射率来推算待测样板上各个测量点的10B面密度,从而达到对于乏燃料水池贮存格架材料B₄C_Al合金硼含量的无损检测。使用该套设备进行了两种B₄C_Al合金20 cm×30 cm悬挂样片的检测,结果可靠。该B₄C_Al材料中子吸收性能检测设备为国内首创,推动了我国含硼中子吸收材料的无损检测研究,能为核电厂乏燃料水池的临界安全监测提供有力保障。     

The radiation characteristics of the transport packages with vitrified high-level waste

The calculation method of neutron yield in the (α, n) reaction for a homogeneous material of arbitrary composition is represented. It is shown that the use of the ORIGEN 2 code excluding the real elemental composition of vitrified high-level waste leads to significant underestimation of the neutron yield in the (α, n) reaction. For vitrified high-level waste and spent nuclear fuel from VVER, the neutron fluxes are analyzed. The thickness of the protective materials for a transfer cask and a shipping cask with vitrified highlevel waste are estimated.