Ferroelectric metal-organic coordination polymer with a high dielectric constant

Two homochiral MOFs, (CBQ)CuI3(CN)3Br (1) and (CBC)CuI2.5(CN)2Br1.5 (2), were prepared by the solvothermal reaction of CuCN with N-4-cyanobenzyl quinidinium bromide (CBQ-Br) and N-4-cyanobenzylcinchonidinium bromide (CBC-Br). 1 and 2 are typical ferroelectric compounds while may have dipolar relaxation ferroelectrics and a high dielectric constant (epsilon o = 119.3).     

The first ionothermal synthesis of a 3D ferroelectric metal-organic framework with colossal dielectric constant

A novel 3D (4,6)-connected topological architecture, obtained under ionothermal conditions by using 1-ethyl-3-methyl imidazolium bromide ([EMI]Br) as solvent and structure-directing agent, presents a non-centrosymmetric polar packing arrangement showing an interesting ferroelectric property.     

Homochiral laminar europium metal-organic framework with unprecedented giant dielectric anisotropy

Hydrothermal (deuteratothermal) reaction of L-ethyl lactate (Lig-Et) with Eu(ClO(4))(3)6 H(2)O gives colorless block crystals of [Eu(Lig)(2)(X(2)O)(2)][ClO(4)] (1, X=H; 2, X=D) both of which possess a two-dimensional laminar homochiral framework. Single-crystal dielectric measurements reveal that 1 and 2 display a giant dielectric anisotropy approximately exceeding 100 and large isotopic effect with about 54 % enhancement along the a axis. Their ferroelectric features further confirm this respect. Crystal parameters: 1, C(6)H(14)ClO(12)Eu, M(r)=465.58, monoclinic, C(2), a=8.6786(6), b=8.3965(6), c=10.2153(7) A, beta=92.040(1) degrees , V=743.92(9) A(3), Z=2, rho(calcd)=2.079 Mg m(-3), R(1)=0.0508, wR(2)=0.1239, mu=4.448 mm(-1), S=1.043; Flack=0.04(5). 2: C(6)H(10)D(4)ClO(12)Eu, M(r)=469.61, monoclinic, C(2), a=8.689(2), b=8.410(2), c=10.224(3) A, beta=92.057(4) degrees , V=746.7(3) A(3), Z=2, rho(calcd)=2.089 Mg m(-3), R(1)=0.0465, wR(2)=0.1150, mu=4.432 mm(-1), S=1.058; Flack=0.02(5).     

A non-interpenetrated porous metal-organic framework with high gas-uptake capacity

A novel microporous polyhedral framework [Zn(6)(btb)(4)(4,4'-bipy)(3)(dmf)(55)(H(2)O)(32)] with high surface area has been designed and synthesized, which shows high multigas-uptake capacity via supercritical carbon dioxide (SCD) activation.     

Implications of a high dielectric constant in proteins

Solvation of protein surface charges plays an important role for the protonation states of titratable surface groups and is routinely incorporated in low dielectric protein models using surface accessible areas. For many-body protein simulations, however, such dielectric boundary methods are rarely tractable and a greater level of simplification is desirable. In this work, we scrutinize how charges on a high dielectric surface are affected by the nonpolar interior core of the protein. A simple dielectric model, which models the interior as a low dielectric sphere, combined with Monte Carlo simulations, shows that for small, hydrophilic proteins the effect of the low dielectric interior is largely negligible and that the protein (and solution) can be approximated with a uniform high dielectric constant equal to that of the solvent. This is verified by estimates of titration curves and acidity constants for four different proteins (BPTI, calbindin D(9k), ribonuclease A, and turkey ovomucoid third domain) that all correlate well with experimental data. Furthermore, the high dielectric approximation follows as a natural consequence of the multipole expansion of the potential due to embedded protein charges in the presence of the low dielectric core region.     

The formation of percolative composites with a high dielectric constant and high conductivity

The dielectric constant and electrical conductivity of a composite of two insulators, poly(1,1-difluoroethylene) (yellow) and K(2) CO(3) (white), increased dramatically near the percolation threshold?f(c) (f=concentration of K(2) CO(3) ). This intriguing phenomenon can be interpreted in terms of interface percolation caused by the formation of chemically activated interfaces.     

Homochiral 1D zinc-quitenine coordination polymer with a high dielectric constant

Heat treatment of a solution of MeOH and water containing the quitenine ligand HQA [HQA = 6-methoxyl-(8S,9R)-cinchonan-9-ol-3-carboxylic acid] and ZnCl2 at 70 degrees C to give the one-dimensional (1D) chain coordination polymer {(HQA)(ZnCl2)(2.5H2O)}n (1). The local coordination geometry around the zinc center in 1 displays a slightly distorted tetrahedron, with the HQA ligand adopting a zwitterionic moiety similar to that found in natural amino acids. Measurements on a powdered sample of 1 reveal a strong second-harmonic-generation response of ca. 20 times larger than that for KDP (KH2PO4). Notably, measurements on the dielectric properties of 1 showed that the 1D chain coordination polymer exhibited a dipolar chain relaxation process and a high dielectric constant (epsilon0= 37.3).     

Guest-dependent high pressure phenomena in a nanoporous metal-organic framework material

The nanoporous metal-organic framework material Cu3(1,3,5-benzenetricarboxylate)2(H2O)3.{guest} exhibits anomalous compression under applied pressure that is associated with the hyper-filling of the pore network. This behavior involves a dramatic transition between a "hard" regime (bulk modulus, Khard approximately 118 GPa), where the pressure-transmitting fluid penetrates the framework cavities, and a "soft" regime (Ksoft approximately 30 GPa), where the guest-framework system compresses concertedly. Not only is the duality in compressibility triggered by the availability of potential guests but the size/penetrability of the guest molecules determines the pressure at which the hard-soft transition occurs. Specifically, the observed compression behavior depends on the size of the pressure-transmitting fluid molecules, the sample particle size (i.e., the extent of the pore network), and the rate at which the pressure is increased. The unprecedented pressure-induced phenomena documented here, illustrates the exotic high-pressure behaviors possible in this versatile class of advanced functional materials with broad implications for their structure-function relationships and accordingly their practical application.     

Some polymers of high dielectric constant

A class of highly conjugated macromolecules exhibiting extraordinarily high effective dielectric constants (DK = 50–900) is described. These polymers are of the polyacene radical quinone type, are highly purified, and exhibit electronic semiconduction. The dielectric constant varies only slightly with pressure (up to 20 Kbar), but strongly with frequency (300–300,000 cps) and moderately with temperature and field strength. The latter effect of field strength on the effective dielectric constant (and on the conductivity) required the development of special measurement techniques which are described. The unusual dielectric behavior can be accounted for assuming the presence of what amounts to a thermally generated plasma of electrons and holes, each locally mobile on extended regions of associated π-orbitals on the molecules. The postulated resulting “hyperelectronic” polarization of the locally mobile charges in external fields fits the observed high magnitude of the polarizability, as well as its field, frequency, and temperature dependence.     

Phthalocyanine with a giant dielectric constant

Compound 1 has been prepared by the reaction of 4-nitrophthalonitrile and trans-2-methoxy-4-(2-nitrovinil)phenol by the common method of nucleophilic substitution of an activated nitro group in an aromatic ring. The metallophthalocyanines 2, 3 were prepared by the reaction of a dinitrile derivative with Co(OAc)(2) or Zn(OAc)(2) in DMSO. The lutetium bis-(phthalocyaninato) complex 4 was obtained by treating the dinitrile derivative with lutetium acetate and DBU in 1-hexanol. The new compounds were characterized by elemental analyses, FT-IR, (1)H-NMR, MALDI-TOF MS and UV/Vis spectral data. The spectroscopic data of the new compounds were in accordance with the structures. The temperature and frequency dependence of dielectric and conduction properties of the spin coated film of compounds (2-4) have been studied by fabricating metal-Pc-metal structures. The results show that compound 2 has giant dielectric constant. At a low range of frequency and room temperature, ε' is found to be equal to 2.33 × 10(6), 1.53 × 10(4) and 1.03 × 10(4) for 2, 3 and 4, respectively. The giant dielectric behavior of 2 is mainly attributed to Maxwell-Wagner polarization. The obtained results also indicated that the frequency dependence of the dielectric permittivity, ε'(ω), exhibits non-Debye type relaxation for all temperatures investigated. The ac conductivity results gave a temperature dependent frequency exponent s. The results were compared with the prediction of the Quantum Mechanical Tunneling and Correlated Barrier Hopping models.     

A composite metal-organic framework material with high selective adsorption for dibenzothiophene

A composite metal-organic framework material Ag⁺/MOF-101 was synthesized and applied to adsorb dibenzothiophene (DBT) from model oils. The loading of Ag⁺ enhanced the deep adsorptive desulfurization capacity for DBT and significantly weaken the adsorption competitiveness of toluene.     

A polyhedron-based metal-organic framework with a reo-e net

A polyhedron-based metal-organic framework has been designed and constructed with a reo-e net, which is constructed from trinuclear nickel clusters and mixed ligands (copolymerization pattern). It comprises three kinds of polyhedra, which are the hexahedron, cuboctahedron and rhombicuboctahedron.     

A designed metal-organic framework based on a metal-organic polyhedron

A C(3) symmetric ligand with three 1,3-benzenedicarboxylate units has been used to construct a metal-organic framework with a (3,24)-connected network topology, where the nanometre-sized metal-organic cuboctahedra (MOCs) have been incorporated solely into a cubic close packing (CCP) arrangement, which led to superoctahedral and supertetrahedral cavities.     

A metal-organic framework with entatic metal centers exhibiting high gas adsorption affinity

A metal-organic framework, PCN-9, containing entatic metal centers, has been synthesized and crystallographically characterized. The H2 and CH4 adsorption enthalpies of PCN-9 are among the highest reported thus far.     

A lanthanide-based metal-organic framework with a dynamic porous property

Hydrothermal reaction of La(NO(3))(3), NaHCO(3) and H(3)L (H(3)L = pyrazole-3,5-dicarboxylic acid) gives a 3D metal-organic framework with a dynamic porous property.     

A lanthanide metal-organic framework with high thermal stability and available Lewis-acid metal sites

A lanthanide metal-organic framework, Dy(BTC)(H2O).DMF, with excellent thermal stability shows a high surface area, 655 m(2) g(-1), high hydrogen and carbon dioxide storage capability, and available Lewis-acid metal sites which could be anticipated to use in catalysis and metal-site specific chemical sensor.     

Novel (3,4,6)-connected metal-organic framework with high stability and gas-uptake capability

A microporous and noninterpenetrated metal-organic framework [Cu(3)(L)(2)(DABCO)(H(2)O)]·15H(2)O·9DMF (1) has been synthesized using two different ligands, [1,1':3',1″-terphenyl]-4,4″,5'-tricarboxylic acid (H(3)L) and 1,4-diazabicyclo[2.2.2]octane (DABCO). As revealed by variable-temperature powder X-ray diffraction (VT-PXRD) measurements, N,N'-ditopic DABCO plays an important role for stabilization of the Cu-L framework. The three-dimensional framework of 1 exhibits high stability and excellent adsorption capacity for H(2) (54.3 mg g(-1) at 77 K and 20 bar), CO(2) (871 mg g(-1) at 298 K and 20 bar), CH(4) (116.7 mg g(-1), 99 cm(3) (STP) cm(-3) at 298 K and 20 bar), and n-pentane (686 mg g(-1) at 298 K and 1 bar). Interestingly, the excellent selectivity toward CO(2) over N(2) at ambient temperature (273 and 298 K) and 1 bar makes complex 1 possess practical application in gas separation and purification.     

New isoreticular metal-organic framework materials for high hydrogen storage capacity

We propose new isoreticular metal-organic framework (IRMOF) materials to increase the hydrogen storage capacity at room temperature. Based on the potential-energy surface of hydrogen molecules on IRMOF linkers and the interaction energy between hydrogen molecules, we estimate the saturation value of hydrogen sorption capacity at room temperature. We discuss design criteria and propose new IRMOF materials that have high gravimetric and volumetric hydrogen storage densities. These new IRMOF materials may have gravimetric storage density up to 6.5 wt % and volumetric storage density up to 40 kg H2/m3 at room temperature.