Synthesis and Study on the Complexation of Dithidiaza 21-Cown-7- Bearing Appended Coumarin or 1-Aminonaphthene as Sidearms

The high toxicity of many transition and post-transition metal ions, especially Hg2+ and Pb2 + , is well recognized and a lot of attention has been paid to control contamination of water supplies by toxic metal ions and to monitor the level of these metal ions in the environment. For the application purpose in controlling and monitoring the concentrations of specific metal ions in a complex matrix continuously and remotely by using ion-selective sensory devices, chemical sensors based on the synthetic fluoroionophores and chromoionophores capable of signaling complexation of metal ions have been reported, [1～ 5], and a series of dithidiaza 21-rown-7 bearing appended coumarin or 1-aminonaphthene as sidearms was synthesized. [6]     

Interfacial Behaviors of Azocalixarene Derivatives at the Air/Water Interface and Photochromism in the Langmuir-Blodgett Films

The azocalixarenes is a novel chromogenic compound and their spectra properties have been reported. A number of them have been applied as selective ionophores in extractive process1 or as selective ligands in ion selective electrodes and optical sensors based on spectra changes2. Some amphiphilic azocalixarene derivatives with hydrophobic long alkyl chains were synthesized and their interfacial behaviors at the air / water interface have also been investigated3. However, the photochromism of t…     

SELECTIVE SEPARATION OF WATER-ETHANOL MIXTURES THROUGH COPOLYMERIC MEMBRANES: Ⅰ. ACRYLIC ACID AND ACRYLONITRILE COPOLYMER AND ITS IONIZED MEMBRANES

The copolymer of acrylic acid and acrylonitrile has been synthesized and pervaporation properties of the copolymeric membranes have been investigated. In order to elucidate the influence of membrane-permeate interaction on the pervaporation of water-ethanol mixtures and to prepare much improved membranes, the membranes have been treated with alkali metal, alkali earth metal and transition metal salt aqueous solutions. The treated membranes (ionized membranes) exhibited higher separation factors than the untreated membranes. The separation factors of various alkali metal cation membranes decreased in the following order : Li~+>Na~+>K~+, and the permeation rates showed an opposite tendency. The dependence of pervaporation behavior on the copolymer composition ,feed concentration and operating temperature have been studied with both ionized and non-ionized membranes. The apparent activation energies of water and ethanol permeation were calculated.     

Phase Equilibrium System of CsCl-YCl3-（9.5%）HCL-H2O at T=298.15 K and Its Compounds

Introduction In a series of papers the authors reported the spec-troscopy results on upconversion luminescence of the double salts between the alkali metal (Rb,Cs) halide and rare earth metal trihalide (REX3).1-4 Consequently, ex-tensive syntheses of new double salts and studies on optical properties of such species have received much more attention.5-12 Although a number of these double salts have been synthesized, the formation in alkali metal halide/rare earth metal halide double salts s…     

Influence of Mg^2＋ on Initial Stages of CaCO3 Scale Formed on Metal Surface

Magnesium ions, which exist in formation water and injection water under downhole conditions in the oil and gas production industry, are a key determinant in the CaCO3 scale formation. Many studies have focused their attention on the effect of magnesium on the kinetics, the morphology and the content of Mg in the Ca-CO3 scale. Little attention has been paid to the effect of Mg^2 on the initial stages of CaCO3 formation on a metal surface. In this study, an electrochemical technique was used to study the influence of Mg^2 on the ini-tial stages of CaCO3 scale formed on a metal surface. With this electrochemical technique, the reduction of the dissolved oxygen in an analysis solution is considered on the surface of a rotating disk electrode (RDE) un-der potentiostatic control. The rate of oxygen reduction on the surface of the RDE enables the extent of sur-face coverage of scale to be assessed. With this electrochemical technique, a new insight into the effect of Mg^2 on CaCO3 scale formed on a metal surface is given.     

For more and purer hydrogen-the progress and challenges in water gas shift reaction

The water gas shift(WGS) reaction is a standard reaction that is widely used in industrial hydrogen production and removal of carbon monoxide. The improved catalytic performance of WGS reaction also contributes to ammonia synthesis and other reactions. Advanced catalysts have been developed for both high and low-temperature reactions and are widely used in industry. In recent years, supported metal nanoparticle catalysts have been researched due to their high metal utilization. Low-temperature c...     

Hydrothermal Synthesis and Properties of Open-Framework Mixed-valence Iron Phosphates IIIII21.543FeFe(PO) with Three-dimensional Structure

Introduction The metal phosphates have attracted much attention because of their potential applications in catalysis, sorp-tion, and magnetic properties.1-5 A large number of metal phosphates6-10 with 1-D chain, 2-D layer and 3-D open-framework have been synthesized under mild hydrothermal conditions in the presence of organic amines. Chiral open-framework phosphates have been synthesized in the presence of chiral metal complexes and chiral structure-directing agents.11-15 In the past years,…     

Synthesis and Crystal Structure of Zinc Complex [Zn（bipy）3][Zn（SCN）4]

1 INTRODUCTION The design and synthesis of metal-organic frame-work structure have been studied widely during thepast decade not only because of their intriguing ar-chitectures but also their unexpected properties forpotential practical applications in a wide number offields, such as asymmetric catalysis, magnetism, pho-toluminescence and so on[1～3]. These novel struc-tures can be rapidly and efficiently synthesized fromsimple subunits, where the metal ions, bi- or multi-dentate organic l…     

STUDY ON THE SWELLING BEHAVIOUR OF COPOLYMER HYDROGEL

The states of water in poly (N-vinylpyrrolidone-methylmethacrylate) and poly (N-vinylpyrroli-done-2-hydroxyethyl methacrylate) hydrogels have been studied by means of DSC. The effect ofpolmer structure on equilibrium swelling extent of water has been examined. It was found that thestate of water and the water content in different hydrogels were dependent on the kind of monomer used,the component of copolymer, the sequence distribution of the monomer unit and the degree of cross-linking (including chemical and physical) to a great extent. The equilibrium water content of thehydrogel may be regarded as the sum of the different state of swollen water contents of the hydrogel.Based on these, a semiempirical formula used to estimate the equilibrium water content of the copolymerhydrogels was presented.     

Synthetic and Structural Studies of N-Heterocyclic Carbene Complexes of Nickel

Transition metal complexes of stable N-heterocyclic carbenes have recently gained increasing attention as pre-catalysts for a number of important reactions primarily based on the analogy between N-heterocyclic carbenes and strong ó-donating tertiary phosphines,[1] Although a large number of transition-metal carbene complexes have been reported, very few incorporate chelating carbenes were reported.[2,3] Therefore, we have set out to prepare and study transition-metal compounds with chelating di-N-heterocyclic carbenes, and we now report new dicationic tetra(carbine)nickel(Ⅱ) complexes in this class (Scheme 1). Their structures have been determined by single-crystal X-ray diffraction studies (Figure 1).     

An ab initio study of water clusters in gas phase and bulk aqueous media: (H2O)n,n=1–12

Geometries of several clusters of water molecules including single minimum energy structures of n‐mers (n=1–5), several hexamers and two structures of each of heptamer to decamer derived from hexamer cage and hexamer prism were optimized. One structural form of each of 11‐mer and 12‐mer were also studied. The geometry optimization calculations were performed at the RHF/6‐311G* level for all the cases and at the MP2/6‐311++G** level for some selected cases. The optimized cluster geometries were used to calculate total energies of the clusters in gas phase employing the B3LYP density functional method and the 6‐311G* basis set. Frequency analysis was carried out in all the cases to ensure that the optimized geometries corresponded to total energy minima. Zero‐point and thermal free energy corrections were applied for comparison of energies of certain hexamers. The optimized cluster geometries were used to solvate the clusters in bulk water using the polarized continuum model (PCM) of the self‐consistent reaction field (SCRF) theory, the 6‐311G* basis set, and the B3LYP density functional method. For the cases for which MP2/6‐311++G** geometry optimization was performed, solvation calculations in water were also carried out using the B3LYP density functional method, the 6‐311++G** basis set, and the PCM model of SCRF theory, besides the corresponding gas‐phase calculations. It is found that the cage form of water hexamer cluster is most stable in gas phase among the different hexamers, which is in agreement with the earlier theoretical and experimental results. Further, use of a newly defined relative population index (RPI) in terms of successive total energy differences per water molecule for different cluster sizes suggests that stabilities of trimers, hexamers, and nonamers in gas phase and those of hexamers and nonamers in bulk water would be favored while those of pentamer and decamer in both the phases would be relatively disfavored. © 2001 John Wiley & Sons, Inc. Int J Quant Chem 81: 90–104, 2001     

Study of HCl clusters in helium nanodroplets: experiments and ab initio calculations as stepping stones from gas phase to bulk

Presented here are the results of the joint theoretical and infrared laser spectroscopic study of the hydrogen chloride monomer and clusters, (HCl)n (n=1-6), isolated in helium nanodroplets. The H-Cl stretching bands of the dimers and trimers show a large increase in the band intensity as well as low frequency shift with respect to that in a single HCl molecule. The average frequency of the bands for clusters larger than trimers remains approximately constant, which correlates well with the onset of the folded cyclic structure and the full development of the hydrogen bonding in larger clusters. The structure of the clusters was found to be cyclic planar for trimers, slightly twisted square planar for tetramers, envelope-like for pentamers, and folded pseudobipyramidal for hexamers. This change in structure upon an increase of the cluster size can be seen as an early stage of the structural transition to the HCl solid, which consists of zigzag chains of HCl molecules. Spectra of large clusters of about 500 molecules consist of a single band, which encompasses the same frequency range of trimers through hexamers.     

ChemInform Abstract: Two‐Dimensional Phosphorus Porous Polymorphs with Tunable Band Gaps.

Topological modeling and first‐principles calculations reveal 21 new 2D phosphorus allotropes with porous structure which can be obtained by topologically assembling of selected P monomers, dimers, trimers, tetramers, and hexamers.     

Pd(Cu)在MgO(100)表面吸附CO和O2的理论研究

采用固体镶嵌势能模型和DFT/B3LYP方法研究了在Pd/MgO和Cu/MgO表面吸附CO和O₂分子的电子性质. 计算结果表明, 在完美MgO(100)表面Pd原子对CO和O₂的吸附能分别为206.5和84.8 kJ/mol, 因此可知Pd原子更容易吸附CO分子; 而当Pd原子附着于有氧缺陷的MgO表面时, 它对两种分子的吸附都非常弱. 相反, 附着于MgO表面的Cu原子对O₂分子的吸附更为有利, 其吸附能在140～155 kJ/mol之间. 研究结果还表明, 对于双分子吸附体系, 即CO＋CO, CO＋O₂, O₂＋O₂体系, 双分子之间的结合力可减小完美MgO表面上Pd原子与被吸附分子的相互作用, 使吸附能减少了46～96 kJ/mol. 而对于在MgO表面上的Cu原子, 只有O₂＋O₂ 体系使吸附能减少了大约50～71 kJ/mol.     

High‐resolution separation of homogeneous chitooligomers series from 2‐mers to 7‐mers by ion‐exchange chromatography

Highly purified chitooligomers with single degree of polymerization are of significance for studying bioactivity of chitooligomers. However, there are few reports on high‐resolution preparative separation of chitooligomers, especially for those oligomers with degree of polymerization higher than 4. This study developed a high‐resolution chromatography for the preparative separation of a pure fully deacetylated chitooligomer series. A glucosamine oligomer mixture with low degree of polymerization was prepared by acid hydrolysis of a highly deacetylated chitosan. Then, six fractions were separated from the prepared oligomer mixture by ion‐exchange chromatography and analyzed by HPLC and ESI/MS, which primarily contained glucosamine dimers, trimers, tetramers, pentamers, hexamers, and heptamers, respectively, with chromatographic purities over 98% for dimers to hexamers and a purity of 93% for heptamers. The yields of a single round of separation were 75, 60, 60, 55, 35, and 20 mg for glucosamine dimers, trimers, tetramers, pentamers, hexamers, and heptamers, respectively. Furthermore, a chromatographic separation model for GlcN homomers was established. The capacity factor (k) of glucosamine oligomers and their degrees of polymerization (DPs) exhibited a good correlation, lnk = 0.786 + 0.846 lnDP, (R² = 0.997). Based on this equation, glucosamine octamers are expected to be separated by this system.     

A Modular Synthetic Strategy for Functional Macrocycles

Reported here is a molecule‐Lego synthetic strategy for macrocycles with functional skeletons, involving one‐pot and high‐yielding condensation between bis(2,4‐dimethoxyphenyl)arene monomers and paraformaldehyde. By changing the blocks, variously functional units (naphthalene, pyrene, anthraquinone, porphyrin, etc.) can be conveniently introduced into the backbone of macrocycles. Interestingly, the macrocyclization can be tuned by the geometrical configuration of monomeric blocks. Linear (180°) monomer yield cyclic trimers and pentamers, while V‐shaped (120°, 90° and 60°) monomers tend to form dimers. More significantly, even heterogeneous macrocycles are obtained in moderate yield by co‐oligomerization of different monomers. This series of macrocycles have the potential to be prosperous in the near future.     

Density functional study of small bimetallic Ag–Pd clusters

The geometric and electronic properties of small Ag_mPd_n clusters with m + n = 2–5 are studied within the framework of density functional theory in conjunction with two hybrid and one GGA exchange–correlation functional. For every composition, the global minimum is identified by using geometry optimization for a collection of initial structures. Results indicate that, for bimetallic tetramers and pentamers, the clusters shift from two-dimensional to three-dimensional structures with the addition of a second Pd atom. Ag₂Pd₂ is identified as the most stable tetramer by the calculation of the excess energy and second energy difference of bimetallic clusters. Concerning the fragmentation channels it is seen that the most favourable route in the majority of cases is via the evaporation of a single atom. Density of states calculations reveal that the increase of Pd content depletes the isolated s states close to the Fermi level, while at the same time shifts the d states to higher energies.     

Electrostatic Energies in the 1,4‐Dichlorobenzene Polymorph Crystals: the Role of Charge Density Overlap Effects in Crystal Packing Analysis

Electrostatic and polarization energies for the three known polymorphic crystal structures of 1,4‐dichlorobenzene, as well as for one particularly stable virtual crystal structure generated by computer search, were calculated by a new accurate numerical integration method over static molecular charge densities obtained from high level ab initio molecular‐orbital calculations. Results are compared with those from standard empirical atom‐atom force fields. The new electrostatic energies, which include charge density overlap (penetration) effects, are seen to be much larger than and sometimes of opposite sign to those derived from point‐charge models. None of the four polymorphs is substantially more stable than the others on electrostatic‐energy grounds. Molecule‐molecule electrostatic energies have been calculated for the more important molecular pairs in each of the four structures; trends are found to be very different from those indicated by point‐charge energies or by total energies estimated with a parametric atom‐atom force field. Conclusions based exclusively on analysis of intermolecular atom contacts and point‐charge electrostatics may need to be modified in the light of the new kind of calculation.     

Self consistent tight binding model for dissociable water

We report results of development of a self consistent tight binding model for water. The model explicitly describes the electrons of the liquid self consistently, allows dissociation of the water and permits fast direct dynamics molecular dynamics calculations of the fluid properties. It is parameterized by fitting to first principles calculations on water monomers, dimers, and trimers. We report calculated radial distribution functions of the bulk liquid, a phase diagram and structure of solvated protons within the model as well as ac conductivity of a system of 96 water molecules of which one is dissociated. Structural properties and the phase diagram are in good agreement with experiment and first principles calculations. The estimated DC conductivity of a computational sample containing a dissociated water molecule was an order of magnitude larger than that reported from experiment though the calculated ratio of proton to hydroxyl contributions to the conductivity is very close to the experimental value. The conductivity results suggest a Grotthuss-like mechanism for the proton component of the conductivity.     

Identification of defect sites on MgO(100) thin films by decoration with Pd atoms and studying CO adsorption properties.

CO adsorption on Pd atoms deposited on MgO(100) thin films has been studied by means of thermal desorption (TDS) and Fourier transform infrared (FTIR) spectroscopies. CO desorbs from the adsorbed Pd atoms at a temperature of about 250 K, which corresponds to a binding energy, E(b), of about 0.7 +/- 0.1 eV. FTIR spectra suggest that at saturation two different sites for CO adsorption exist on a single Pd atom. The vibrational frequency of the most stable, singly adsorbed CO molecule is 2055 cm(-)(1). Density functional cluster model calculations have been used to model possible defect sites at the MgO surface where the Pd atoms are likely to be adsorbed. CO/Pd complexes located at regular or low-coordinated O anions of the surface exhibit considerably stronger binding energies, E(b) = 2-2.5 eV, and larger vibrational shifts than were observed in the experiment. CO/Pd complexes located at oxygen vacancies (F or F(+) centers) are characterized by much smaller binding energies, E(b) = 0.5 +/- 0.2 or 0.7 +/- 0.2 eV, which are in agreement with the experimental value. CO/Pd complexes located at the paramagnetic F(+) centers show vibrational frequencies in closest agreement with the experimental data. These comparisons therefore suggest that the Pd atoms are mainly adsorbed at oxygen vacancies.