Nanoscale aggregate structures of trisiloxane surfactants at the solid-liquid interface

The self-associating structures at the solid-liquid interface of three nonionic trisiloxane surfactants ((CH3)3SiO)2Si(CH3)(CH2)3(OCH2CH2)n OH (n = 6, 8, and 12), or BEn, are studied as a function of substrate properties by atomic force microscopy (AFM) imaging and force measurement. These trisiloxane surfactants are known as superwetters, which promote rapid spreading of dilute aqueous solutions on low-energy surfaces. This study also attempts to relate the BEn surface aggregate structures at the solid-liquid interface to their superwetting behavior. Four substrates are used in the study: muscovite mica, highly oriented pyrolytic graphite, and oxidized silicon wafer with and without a full monolayer of self-assembled n-octadecyltrichlorosilane (OTS). The concentration of BEn is fixed at 2 times the critical aggregation concentration (CAC). The BEn surfactants are only weakly attracted to hydrophilic surfaces, more on oxidized silicon than on mica. All three form ordinary planar monolayers on HOPG and OTS-covered oxidized silicon. The significance of surfactant adsorption on the AFM tip is investigated by comparing the force curves obtained by tips with and without thiol modification. The surface aggregate structures of the BEn surfactants correlate with their bulk structures and do not exhibit anomalous adsorption behavior. The adsorption behavior of the BEn superwetters is similar to that of the CmEn surfactants. Thus, our results confirm previous work showing that superwetting shares its main features with other classes of surfactants.     

Template-induced enhanced ordering under confinement

We report a surprisingly strong ordering of Si-(CH(3))(2) groups upon confinement between two surfaces, an oxidized poly(dimethyl siloxane) (PDMS(ox)) elastomer and a methyl-terminated self-assembled monolayer (octadecyltrichlorosilane (OTS)) on sapphire substrates. This enhanced ordering is induced by the template of ordered methyl groups of OTS and is not observed for other surfaces (fluorinated monolayers and sapphire substrates). This strong ordering is reminiscent of layering observed for confined symmetric molecules between two mica surfaces but was expected to vanish between rough macroscopic surfaces. These results provide new insights on confined structure at the interface between two solids and are important in the understanding of surface-controlled processes of practical importance.     

Effects of surface hydrophobization on the growth of self-assembled monolayers on silicon

The growth of self-assembled monolayers from octadecyltrichlorosilane (OTS) on modified silicon surfaces has been investigated. The influence of different immersion times in a deactivation reagent on the growth mechanism and the ordering of the films has been studied. Characterization of the films and the submonolayer coverage has been performed with tapping mode atomic force microscopy, ellipsometry, and infrared spectroscopy. We found that a deactivation of active sites led to a higher mobility of adsorbed molecules on the surface resulting in circular islands of highly ordered alkylsiloxane. However, upon prolonged immersion in OTS these ordered islands did not continue to grow and full monolayer coverage could not be obtained. Instead, an exchange reaction with the deactivation reagent leading to a disordered film between the ordered islands was observed. This was confirmed by external reflection infrared spectroscopy.     

Dependence of the molecular aggregation state of octadecylsiloxane monolayers on preparation methods

The molecular aggregation state of octadecylsiloxane monolayers on Si-wafer substrate surfaces prepared from octadecyltrimethoxysilane (OTMS) or octadecyltrichlorosilane (OTS) was investigated on the basis of grazing incidence X-ray diffraction (GIXD), Fourier transform infrared spectroscopy (FT-IR), contact angle measurement, field emission scanning electron microscopy (FE-SEM), and scanning force microscopy (SFM). The OTMS monolayer was prepared by using the chemical vapor adsorption (CVA) method, and the OTS monolayers, which were used as reference samples, were prepared either by chemisorption (OTS-S) or by the water-cast method (OTS-W). The GIXD, FT-IR, lateral force microscopic (LFM) measurements, and FE-SEM observation revealed that the alkyl chains in the OTMS monolayers prepared using the CVA method are in an amorphous state at room temperature. According to the LFM measurement, the transition temperature from the hexagonal crystalline phase to the amorphous phase was found to be ca. 333 K for the OTS-S monolayer prepared by the chemisorption method. However, the phase transition was not observed in the OTMS monolayer prepared by the CVA method. Also, the atomic force microscopic (AFM) observation and the contact angle measurement showed that the OTMS monolayer prepared by the CVA method has a uniform surface when compared to the OTS monolayers. These results indicated that organosilane compounds in the monolayer prepared by the CVA method were immobilized on the Si-wafer substrate surface in an amorphous state, which was quite different from the hexagonal crystalline state obtained by the chemisorption and water-cast methods.     

Scanning force microscopic study of protein adsorption on the surface of organosilane monolayers prepared by the Langmuir‐Blodgett method

The n‐octadecyltrichlorosilane (OTS, CH₃(CH₂)₁₇SiCl₃), 18‐nonadecenyltrichlorosilane (NTS, CH₂=CH(CH₂)₁₇SiCl₃), [2‐(perfluorooctyl)ethyl] trichlorosilane (FOETS, CF₃(CF₂)₇CH₂CH₂SiCl₃) monolayers, and their mixed monolayers were used as the model substrates for the study of protein adsorption mechanism. Surface plasmon resonance (SPR) spectroscopy was applied to analyze the protein adsorption behavior onto the surface of the monolayers. Atomic force microscope (AFM) was used to observe the monolayer surfaces after exposure of these monolayers to bovine serum albumin (BSA) and γ‐globulin(IgG) solution. AFM observation revealed that the charged protein either below or above the isoelectric point was preferentially adsorbed onto the FOETS phase of the (OTS/FOETS) mixed monolayer. SPR revealed that the amount of adsorbed protein in the charged state was lower than that in the neutral state. These results indicate that the preferential adsorption of protein onto the FOETS phase for the mixed monolayer systems at either below or above pI is due to (1) the minimization of interfacial free energy between the monolayer surface and the buffer solution, and (2) the electrostatic repulsion among protein molecules bearing charges.     

基于AFM纳米氧化技术的金纳米粒子定点组装

二维纳米粒子矩阵列在纳米电子器件^[1,2]、表面增强喇曼活性基底^[3,4]、刻蚀掩模^[5]等领域具有广泛的应用前景。在这些纳米粒子阵列为内部,纳米粒子的排布是随机、无序的。这一缺点已经妨碍了纳米粒子阵列在上述领域中的进一步应用。基于此,人们开始关注纳米粒子的可控组装。传统的光刻技术^[6]、微接触印刷技术^[7]以及生物分子模板技术^[8]都被用来实现纳米粒子在固体表面上的可控组装,本实验室在纳米粒子的合成及可控组装方面也进行了研究^[7,9,11]。本文力图精确控制单个纳米粒子在基底表面上的组装位置。利用AFM纳米氧化技术。在硅表面构建了纳米级的化学图形化表面,通过不同的化学官能团,如甲基、氨基对金纳米粒子亲和性质的差异,实现了纳米粒子在固体表面的定点组装。     

Benzoic and aliphatic carboxylic acid monomolecular layers on oxidized GaAs surface as a tool for two-dimensional photonic crystal infiltration

The possibility of using surface-adsorbed monolayers on oxidized GaAs single crystals is investigated to explore liquid crystal (LC) wettability and alignment. A technological process is developed to chemically activate the GaAs surface with a view to perform the infiltration of tunable two-dimensional (2-D) photonic crystals with LC materials. We demonstrate a vapor growth method to fabricate self-organized monolayers of carboxylated derivatives on plasma-activated surfaces. Our monolayers strongly increase the wettability of liquid crystal surfaces and may be helpful in achieving the infiltration of 2-D GaAs photonic crystals. Two types of molecular families were studied in this work: benzoic acids and fatty acids. Para-substituted benzoic acids with a wide range of electrical dipoles allow adsorption to be followed by measuring the surface potential of the grafted substrates using the Kelvin probe technique. These model compounds yield important information on the grafting conditions and the stability of the layers. Surface-adsorbed fatty acids are well-known to produce hydrophobic surfaces. The water contact angles measured on modified GaAs surfaces are equivalent to the ones measured on classical alkanethiol layers on gold.     

Covalently modified silicon and diamond surfaces: resistance to nonspecific protein adsorption and optimization for biosensing

We report the direct covalent functionalization of silicon and diamond surfaces with short ethylene glycol (EG) oligomers via photochemical reaction of the hydrogen-terminated surfaces with terminal vinyl groups of the oligomers, and the use of these monolayers to control protein binding at surfaces. Photochemical modification of Si(111) and polycrystalline diamond surfaces produces EG monolayers linked via Si-C bond formation (silicon) or C-C bond formation (diamond). X-ray photoelectron spectroscopy was used to characterize the monolayer composition. Measurements using fluorescently labeled proteins show that the EG-functionalized surfaces effectively resist nonspecific adsorption of proteins. Additionally, we demonstrate the use of mixed monolayers on silicon and diamond and apply these surfaces to control specific versus nonspecific binding to optimize a model protein sensing assay.     

Self-assembled silane monolayers: fabrication with nanoscale uniformity

Illustrating direct connections between surface chemical events and mechanical and topological characteristics of self-assembled monolayers derived from octadecyltrichlorosilane (OTS) adsorption on Si(100), layers prepared in the presence and absence of moisture have been characterized. Uniform and robust self-assembled monolayers are demonstrated provided the Si(100) surface is fully hydroxylated by treatment in piranha solution and the dried surface is exposed to OTS under strict anhydrous conditions. With nanoscale resolution, the uniform mechanical properties are confirmed by interfacial force microscopy while the uniform topological properties are evident in atomic force microscopy images. The monolayer character of the OTS coverage is confirmed by X-ray photoelectron spectroscopy, ellipsometry, and patterning experiments. Analogous surfaces, prepared in the presence of moisture, exhibit nonuniform topological and mechanical properties.     

Scanning force microscopic study of surface structure and properties of (alkylsilane/ fluoroalkylsilane) mixed monolayers

(Alkylsilane/fluoroalkylsilane) mixed monolayers were immobilized covalently on a silicon wafer surface with stable surface structure. Atomic force microscopic observation of the n-octadecyltrichlorosilane (OTS)/[2-(perfluorooctyl)ethyl]trichlorosilane (FOETS) mixed monolayer revealed that the crystalline OTS circular domains of ca. 1–2μm in diameter were surrounded by a sealike amorphous FOETS matrix, even though the molar fraction of OTS was above 75%. Also, the phaseseparated monolayer can be prepared from FOETS, and a non-polymerizable and crystallizable amphiphile such as lignoceric acid (LA). The phase separation of the (alkylsilane/fluoroalkylsilane) mixed monolayer might be attributed to both faster spreading of FOETS molecules on the water surface and the crystallizable characteristics of alkylsilane molecules. The mixed monolayer of crystalline alkylsilane (OTS) and amorphous alkylsilane (n-dodecyltrichlorosilane, DDTS) formed a phase-separated structure on the water surface because of the crystallizable characteristics of OTS. Lateral force microscopic (LFM) observation revealed that the order of the magnitude of lateral force generated against the silicon nitride tip was: n-triacontyltrichlorosilane (TATS) domain with longer alkyl chain > amorphous FOETS matrix > crystalline OTS domain. On the other hand, scanning viscoelasticity microscopic observation revealed that the order of the magnitude of modulus was: Si substrate > crystalline OTS domain > amorphous FOETS matrix.     

Simple methods for the direct assembly, functionalization, and patterning of acid-terminated monolayers on Si111

This article describes mild methods to directly assemble, functionalize, and pattern monolayers of undecylenic acid on hydrogen-terminated Si(111). These monolayers were assembled under very mild conditions from a neat solution of undecylenic acid containing 0.1 mol % 4-(decanoate)-2,2,6,6-tetramethylpiperidinooxy at room temperature without the need for UV light. Because of these mild conditions, monolayers exposing carboxylic acids could be assembled in one step without the need to protect the acid prior to its assembly. The monolayers were extensively characterized by horizontal attenuated total reflection infrared spectroscopy, X-ray photoelectron spectroscopy (XPS), and contact angle goniometry. The monolayers bonded to the silicon surface preferentially through the olefin with no detectable bonds between the carboxylic acids and silicon. The crystallinity of the monolayer was studied by infrared spectroscopy through the antisymmetric--v(a)(CH(2))--and symmetric--v(s)(CH(2))--stretches for methylene. Because it is important for future applications to assemble functional surfaces, methods to react the acid-terminated monolayers with trifluoroacetic anhydride and triethylamine to yield a symmetric anhydride on the monolayer were studied. These anhydrides were reacted with a variety of milligram-quantity amines to yield amide-terminated surfaces. This method was general, and a variety of amines could be bonded to the monolayer. The stabilities of these monolayers upon exposure to ambient conditions and under a variety of solvents were described. Because patterned monolayers have found wide applications, we have developed methods to pattern 1-octadecylamine and poly(ethylenimine) on the micrometer scale using soft lithography. In addition, polymer brushes of polynorbornene with thicknesses from 32 to 150 nm were grown from monolayers patterned with the Grubbs' catalyst. The patterned surfaces were imaged by scanning electron microscopy, scanning probe microscopy, and ellipsometry to determine the thicknesses of the patterns and the fidelity of the method.     

Sum-frequency spectroscopic study of Langmuir monolayers of lipids having oppositely charged headgroups

Sum-frequency vibrational spectroscopy, with the help of surface pressure-area (π-A) isotherm, was used to study lipid Langmuir monolayers composed of molecules with positively and negatively charged headgroups as well as a 1:1 neutral mixture of the two. The spectral profiles of the CH(x) stretch vibrations are similar for all monolayers in the liquid-condensed (LC) phase. They suggest a monolayer structure of closely packed alkyl chains that are nearly all-trans and well oriented along the surface normal. In the liquid-expanded (LE) phase, the spectra of all monolayers appear characteristic of loosely packed chains with significant gauche defects. The OH stretch spectra of interfacial water for both positively and negatively charged monolayers are significantly enhanced in comparison with a neutral water interface, but the phase measurement of SFVS indicates that OH in the two cases points toward the bulk and the interface, respectively. The enhancement results mainly from surface-field-induced polar ordering of interfacial water molecules. For a charge-neutral monolayer composed of an equal number of positively and negatively charged lipid molecules, no such enhancement is observed. This mixed monolayer exhibits a wide range of LC/LE coexistence region extended to very low surface pressure and its CH(x) spectral profile in the coexistence region resembles that of the LC phase. This result suggests that in the LC/LE coexistence region, the mixed monolayer consists of coexisting LC and LE patches in which oppositely charged lipid molecules are homogeneously mixed and dispersed.     

Biofunctionalization on alkylated silicon substrate surfaces via "click" chemistry

Biofunctionalization of silicon substrates is important to the development of silicon-based biosensors and devices. Compared to conventional organosiloxane films on silicon oxide intermediate layers, organic monolayers directly bound to the nonoxidized silicon substrates via Si-C bonds enhance the sensitivity of detection and the stability against hydrolytic cleavage. Such monolayers presenting a high density of terminal alkynyl groups for bioconjugation via copper-catalyzed azide-alkyne 1,3-dipolar cycloaddition (CuAAC, a "click" reaction) were reported. However, yields of the CuAAC reactions on these monolayer platforms were low. Also, the nonspecific adsorption of proteins on the resultant surfaces remained a major obstacle for many potential biological applications. Herein, we report a new type of "clickable" monolayers grown by selective, photoactivated surface hydrosilylation of α,ω-alkenynes, where the alkynyl terminal is protected with a trimethylgermanyl (TMG) group, on hydrogen-terminated silicon substrates. The TMG groups on the film are readily removed in aqueous solutions in the presence of Cu(I). Significantly, the degermanylation and the subsequent CuAAC reaction with various azides could be combined into a single step in good yields. Thus, oligo(ethylene glycol) (OEG) with an azido tag was attached to the TMG-alkyne surfaces, leading to OEG-terminated surfaces that reduced the nonspecific adsorption of protein (fibrinogen) by >98%. The CuAAC reaction could be performed in microarray format to generate arrays of mannose and biotin with varied densities on the protein-resistant OEG background. We also demonstrated that the monolayer platform could be functionalized with mannose for highly specific capturing of living targets (Escherichia coli expressing fimbriae) onto the silicon substrates.     

Phase transition of alkylsilane monolayers studied by temperature-dependent grazing incidence X-ray diffraction

The phase transition of organosilane monolayers on Si-wafer substrate surfaces prepared from octadecyltrichlorosilane (OTS) or docosyltrichlorosilane (DOTS) was investigated on the basis of grazing incidence X-ray diffraction (GIXD) at various temperatures. The OTS monolayer was prepared by a chemisorption method. The DOTS monolayer was prepared by a water-cast method (DOTS). The GIXD measurement clarified that the OTS monolayer also changed from hexagonal phase to amorphous state above a melting point of otadecyl groups. The GIXD measurements also clarified that the molecular aggregation state of the DOTS monolayer changes from an anisotropic phase to an isotropic phase with an increase in temperature. An estimated linear thermal expansion coefficient of the lattice lengths of a and b of the DOTS monolayer in the rectangular crystalline state assigned a similar value to those of bulk polyethylene with an orthorhombic crystalline lattice. The setting angle of the ab plane of the rectangular DOTS monolayer also showed similar behavior to that of the ab plane of bulk polyethylene.     

Monte Carlo simulation of properties of monolayers and metal islands adsorbed on metallic (111) surfaces

To obtain the surface stress changes deltasigma due to the adsorption of metal monolayers onto metallic surfaces, a new model derived from thermodynamic considerations is presented. Such a model is based on continuum Monte Carlo simulations with embedded atom method potentials in the canonical ensemble, and it is extended to consider the behavior on different islands adsorbed onto (111) substrate surfaces. Homoepitaxial and heteroepitaxial systems are studied. Pseudomorphic growth is not observed for small metal islands with considerable positive misfit with the substrate. Instead, the islands become compressed upon increase of their size. A simple model is proposed to interpolate between the misfits of atoms in small islands and the pseudomorphic behavior of the monolayer.     

Perfecting imperfect "monolayers": removal of siloxane multilayers by CO2 snow treatment

Self-assembled monolayers (SAMs) of N-(3-triethoxysilylpropyl)-4-hydroxybutyramide were prepared on silicon oxide on silicon (Si/SiO(2)). Initial silane adsorption and high-temperature annealing led to a stable base monolayer with many large over-lying islands of disordered multilayers as a result of the non-self-limited growth process. The disordered multilayers were hydrolyzed and subsequently removed by CO(2) snow treatment. The resulting films were one monolayer thick as measured by ellipsometry. Atomic force microscopy, attenuated total reflection Fourier transform infrared spectroscopy, and contact angle analysis showed that the films were composed of monolayers with full and uniform surface coverage rather than nonuniform coverage by islands or patches of multilayers. Monolayers of octadecyltrichlorosilane were also prepared by multilayer removal via CO(2) treatment, showing the general applicability of the technique toward siloxane SAMs. We believe that CO(2) is an excellent solvent for weakly bound and hydrolyzed molecules that compose multilayers, and this ability to prepare near-perfect monolayer films from imperfect ones allows for less stringent formation conditions.     

Adsorption of bisulfate on the Ru(0001) single crystal electrode surface

Adsorption of anions from sulfuric acid solutions has been studied on Ru(0001) single crystal and polycrystalline surfaces by electrochemical techniques and in-situ Fourier transform infrared spectroscopy. Infrared spectroscopy shows that bisulfate is the anion adsorbed on the Ru(0001) surface. The bisulfate adsorption is detected at the H₂ evolution potential and extends into the potential region where the Ru surface is oxidized. A method for extracting unipolar bands from bipolar bands has been presented. The tuning rate of adsorbed bisulfate in the double layer potential region of Ru(0001) was found to be significantly smaller than those observed for other platinum metals. This has been ascribed to a small change in bisulfate coverage on Ru(0001) in this potential range. Bisulfate vibration frequencies are higher on this surface than at any face-centered cubic metal with the (111) orientation. Oxidation of the Ru(0001) surface is limited to one electron per Ru atom, distinctly different from the high degree of oxidation seen in polycrystalline surfaces. For oxidized polycrystalline Ru, only solution phase sulfates and bisulfates are observed in the IR spectra.     

Phospholipid morphologies on photochemically patterned silane monolayers

We have studied the spreading of phospholipid vesicles on photochemically patterned n-octadecylsiloxane monolayers using epifluorescence and imaging ellipsometry measurements. Self-assembled monolayers of n-octadecylsiloxanes were patterned using short-wavelength ultraviolet radiation and a photomask to produce periodic arrays of patterned hydrophilic domains separated from hydrophobic surroundings. Exposing these patterned surfaces to a solution of small unilamellar vesicles of phospholipids and their mixtures resulted in a complex lipid layer morphology epitaxially reflecting the underlying pattern of hydrophilicity. The hydrophilic square regions of the photopatterned OTS monolayer reflected lipid bilayer formation, and the hydrophobic OTS residues supported lipid monolayers. We further observed the existence of a boundary region composed of a nonfluid lipid phase and a lipid-free moat at the interface between the lipid monolayer and bilayer morphologies spontaneously corralling the fluid bilayers. The outer-edge of the boundary region was found to be accessible for subsequent adsorption by proteins (e.g., streptavidin and BSA), but the inner-edge closer to the bilayer remained resistant to adsorption by protein or vesicles. Mechanistic implications of our results in terms of the effects of substrate topochemical character are discussed. Furthermore, our results provide a basis for the construction of complex biomembrane models, which exhibit fluidity barriers and differentiate membrane properties based on correspondence between lipid leaflets. We also envisage the use of this construct where two-dimensionally fluid, low-defect lipid layers serve as sacrificial resists for the deposition of protein and other material patterns.     

Functional monolayers for improved resistance to protein adsorption: oligo(ethylene glycol)-modified silicon and diamond surfaces

The interaction of proteins with semiconductors such as silicon and diamond is of great interest for applications such as electronic biosensing. We have investigated the use of covalently bound oligo(ethylene glycol), EG, monolayers on diamond and silicon to minimize nonspecific protein adsorption. Protein adsorption was monitored by fluorescence scanning as a function of the length of the ethylene glycol chain (EG3 through EG6) and the terminal functional group (methyl- versus hydroxyl-terminated EG3 monolayer). More quantitative measurements were made by eluting adsorbed avidin from the surface and measuring the intensity of fluorescence in the solution. The attachment chemistry of the tri(ethylene glycol) molecules and monolayer orientation was studied by X-ray photoelectron spectroscopy. Improvement in the selectivity of surfaces modified with EG functionality was demonstrated in two model biosensing assays. We find that high-quality EG monolayers are formed on silicon and diamond and that these EG3 monolayers are as effective as EG3 self-assembled monolayers on gold at resisting nonspecific avidin adsorption. These results show promise for use of silicon and diamond materials in many potential applications such as biosensing and medical implants.     

The reaction of tetrakis(dimethylamido)titanium with self-assembled alkyltrichlorosilane monolayers possessing -OH, -NH2, and -CH3 terminal groups

The reactions of tetrakis(dimethylamido)titanium, Ti[N(CH(3))(2)](4), with alkyltrichlorosilane self-assembled monolayers (SAMs) terminated by -OH, -NH(2), and -CH(3) groups have been investigated with X-ray photoelectron spectroscopy (XPS). For comparison, a chemically oxidized Si surface, which serves as the starting point for formation of the SAMs, has also been investigated. In this work, we examined the kinetics of adsorption, the spatial extent, and stoichiometry of the reaction. Chemically oxidized Si has been found to be the most reactive surface examined here, followed by the -OH, -NH(2), and -CH(3) terminated SAMs, in that order. On all surfaces, the reaction of Ti[N(CH(3))(2)](4) was relatively facile, as evidenced by a rather weak dependence of the initial reaction probability on substrate temperature (T(s) = -50 to 110 degrees C), and adsorption could be described by first-order Langmuirian kinetics. The use of angle-resolved XPS demonstrated clearly that the anomalous reactivity of the -CH(3) terminated SAM could be attributed to reaction of Ti[N(CH(3))(2)](4) at the SAM/SiO(2) interface. Reaction on the -NH(2) terminated SAM proved to be the "cleanest", where essentially all of the reactivity could be associated with the terminal amine group. In this case, we found that approximately one Ti[N(CH(3))(2)](4) adsorbed per two SAM molecules. On all surfaces, there was significant loss of the N(CH(3))(2) ligand, particularly at high substrate temperatures, T(s) = 110 degrees C. These results show for the first time that it is possible to attach a transition metal coordination complex from the vapor phase to a surface with an appropriately functionalized self-assembled monolayer.