DPPC Langmuir monolayer at the air-water interface: probing the tail and head groups by vibrational sum frequency generation spectroscopy

Dipalmitoylphosphatidylcholine (DPPC) is the predominant lipid component in lung surfactant. In this study, the Langmuir monolayer of deuterated dipalmitoylphosphatidylcholine (DPPC-d62) in the liquid-expanded (LE) phase and the liquid-condensed (LC) phase has been investigated at the air-water interface with broad bandwidth sum frequency generation (BBSFG) spectroscopy combined with a Langmuir film balance. Four moieties of the DPPC molecule are probed by BBSFG: the terminal methyl (CD3) groups of the tails, the methylene (CD2) groups of the tails, the choline methyls (CH3) in the headgroup, and the phosphate in the headgroup. BBSFG spectra of the four DPPC moieties provide information about chain conformation, chain orientation, headgroup orientation, and headgroup hydration. These results provide a comprehensive picture of the DPPC phase behavior at the air-water interface. In the LE phase, the DPPC hydrocarbon chains are conformationally disordered with a significant number of gauche configurations. In the LC phase, the hydrocarbon chains are in an all-trans conformation and are tilted from the surface normal by 25 degrees. In addition, the orientations of the tail terminal methyl groups are found to remain nearly unchanged with the variation of surface area. Qualitative analysis of the BBSFG spectra of the choline methyl groups suggests that these methyl groups are tilted but lie somewhat parallel to the surface plane in both the LE and LC phases. The dehydration of the phosphate headgroup due to the LE-LC phase transition is observed through the frequency blue shift of the phosphate symmetric stretch in the fingerprint region. In addition, implications for lung surfactant function from this work are discussed.     

Dynamic properties of soy globulin adsorbed films at the air-water interface

In this paper we present surface dilatational properties of soy globulins (beta-conglycinin, glycinin, and reduced glycinin with 10 mM of dithiothreitol (DTT)) adsorbed onto the air-water interface, as a function of adsorption time. The experiments were performed at constant temperature (20 degrees C), pH (8.0), and ionic strength (0.05 M). The surface rheological parameters were measured as a function of protein concentration (ranging from 1 to 1x10(-3)% wt/wt). We found that the surface dilatational modulus, E, increases, and the phase angle, phi, decreases with time, theta, which may be associated with protein adsorption. These phenomena have been related to protein adsorption, unfolding, and/or protein-protein interactions (at long-term adsorption) as a function of protein concentration in solution. From a rheological point of view, the surface viscoelastic characteristics of soy globulin films adsorbed at the air-water interface are practically elastic. The main conclusion is that the dilatational properties of the adsorbed films depend on the molecular structure of the protein.     

Sum frequency generation vibrational spectroscopic studies on a silane adhesion-promoting mixture at a polymer interface

Sum frequency generation (SFG) vibrational spectroscopy was used to probe the interface between poly(ethylene terephthalate) with deuterated ethylene glycol subunits (d4-PET) and a silane adhesion-promoting mixture (SAPM) comprised of (3-glycidoxypropyl)trimethoxysilane (gamma-GPS) and a methylvinylsiloxanol (MVS). Such a mixture has been found to improve the adhesion of an addition-curing silicone elastomer to a range of plastic and metal substrates. Our results demonstrated that at the interface between d4-PET and a SAPM with a gamma-GPS/MVS ratio of 1:1 (w/w), the silane molecules not only segregated to the interface but also the methoxy headgroups likely adopted a greater net orientational order along the surface normal than at the d4-PET/gamma-GPS interface. The effects of varying the silane/siloxane ratio and using different siloxane oligomers on interfacial structures were also examined. This study provides unique molecular-level insights into the prerequisite conditions for adhesion of curable silicone adhesives.     

Non-linear vibrational sum frequency spectroscopy of atmospherically relevant molecules at aqueous solution surfaces

Surface vibrational sum frequency spectroscopy has been shown to be a powerful surface probe of molecules adsorbed at solid and liquid surfaces. Studies described herein apply this method to studying heterogeneous air/aqueous solution interfaces to understand surface adsorption and structure of several solute molecules adsorbed at aqueous surfaces. The molecules examined at aqueous solution surfaces include Dimethyl sulfoxide (DMSO), methane sulfonic acid (MSA) and acetone. These results reveal that small soluble molecules such as these organize in different ways at the surface of aqueous solutions. This surface organization has implications for atmospheric chemical processes since adsorption at the surface of atmospheric aerosols affects bulk chemical concentrations.     

Interfacial rheological studies of gelatin-sodium dodecyl sulfate complexes adsorbed at the air-water interface

The dilational rheological behavior of gelatin molecules adsorbed at the air-water interface has been studied as a function of sodium dodecyl sulfate (SDS) concentration for a 7 wt % gelatin-SDS solution at 40 degrees C. Binding of SDS molecules to the gelatin strands disrupts the cross-linked network structure of adsorbed gelatin molecules and results in a reduction of the surface elastic modulus of the adsorbed layer that continues until the bulk SDS concentration reaches 1 mM. Beyond this SDS concentration, the dilational rheological properties of the adsorbed gelatin layer are indistinguishable from those of pure SDS adsorbed layers.     

Toroid morphology by ABC-type amphiphilic rod-coil molecules at the air-water interface

The interfacial and aggregation behavior of the ABC-type amphiphilic molecules with semirigid dumbbell-shaped core and variable length of hydrophobic branched tails (R=(CH2)nCH3 with n=5 (1), 9 (2), 13 (3)) were investigated. At low surface pressure, smooth, uniform monolayers were formed at the air-water interface by molecules 1 and 2, whereas for molecule 3 unique 2D toroid aggregates have been formed. These aggregates were relatively stable within a range of surface pressure and spreading solution concentration. Upon compression, the 2D toroid aggregates collapsed into large, round 3D aggregates. Finally, the choice of spreading solvent has a great influence on aggregation formation into 2D or 3D micelles as a result of the variable balance of the hydrophobic interactions of branched tails and the pi-pi stacking interaction between aromatic segments.     

Behavior of pure and mixed DPPC liposomes spread or adsorbed at the air-water interface

Liposomes from pure dipalmitoylphosphatidylcholine (DPPC) and mixed DPPC: distearoylphosphatidylcholine (DSPC): soybean lecithin (SL) prepared by the Bangham method with sonication were dispersed into solution or spread at the interface and the kinetics of the surface film formation was studied by measuring and recording the evolution of superficial tension, surface potential, and superficial (¹⁴C labeled) DPPC density.A simple theoretical approach can describe these kinetics by two processes: irreversible diffusion of closed vesicles into or from the bulk phase, and irrevers ible transformation of closed spherical vesicles into destroyed ones which form the surface film. Diffusion controls the phenomenon for small initial amounts of liposomes.Transformation controls the phenomenon for important initial amounts of liposomes. The kinetic constant of the transformation,K, does not depend on the technique used to form the surface film (spreading or adsorption).The equilibrium and rheological properties of surface films formed after liposome spreading are compared to those of monolayers     

Molecular level studies of polymer behaviors at the water interface using sum frequency generation vibrational spectroscopy

Industrial plastics, biomedical polymers and numerous other polymeric systems are contacted with water for everyday functions and after disposal. Probing the interfacial molecular interactions between widely used polymers and water yields valuable information that can be extrapolated to macroscopic polymer/water interfacial behaviors so scientists can better understand polymer bio-compatibility, hygroscopic tendencies and improve upon beneficial polymer behavior in water. There is an ongoing concerted effort to elucidate the molecular level behaviors of polymers in water by using sum frequency generation vibrational spectroscopy (SFG). SFG stands out for its utility in probing buried interfaces in situ and in real time without disrupting interfacial chemistry. Included in this review are SFG water interfacial studies performed on poly(methacrylate) and (acrylate)s, poly(dimethyl siloxane)s, poly(ethylene glycol)s, poly(electrolyte)s and other polymer types. The driving forces behind common water/polymer interfacial molecular features will be discussed as well as unique molecular reorientation phenomena and resulting macroscopic behaviors from microscopic polymer rearrangement. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

The effect of surface coverage on conformation changes of bovine serum albumin molecules at the air-solution interface detected by sum frequency generation vibrational spectroscopy

The air-BSA solution interface has been investigated by various techniques for years. From these studies we know that BSA molecules segregate at the BSA solution-air interface, and the surface coverage increases with the increase of the bulk solution concentration. However, questions still remain as to whether the protein changes conformation, orientation, or a combination of the two upon adsorption. In this paper, by using sum frequency generation (SFG) vibrational spectroscopy we found that the conformation of interfacial BSA molecules changes dramatically at the solution-air interface, compared to that of the native BSA in solution. The hydrophobic methyl groups of BSA molecules at this interface tend to align along the surface normal. The degree of such conformational changes of surface BSA molecules depend on the surface coverage, indicating that the protein-protein interaction plays a very important role in determining the conformation of interfacial protein molecules. At very low surface concentration, the adsorbed BSA molecules unfold substantially. Our results can provide a molecular interpretation of results obtained from other studies such as protein layer thickness and surface tension measurements of protein solution.     

Sum frequency generation spectroscopic studies on phase transitions of phospholipid monolayers containing poly(ethylene oxide) lipids at the air-water interface

Vibrational sum frequency generation (SFG) spectroscopy was applied to study the phase transitions of the mixed monolayers of l-alpha-distearoyl phosphatidylethanolamine (DSPE) and DSPE covalently coupled with poly(ethylene oxide) at the amino head group (DSPE-EO(45), DSPE with 45 ethylene oxide monomers) at the air-water interface. The SFG spectra were measured for the mixed monolayers with the mole fractions of DSPE-EO(45) of 0, 1.3, 4.5, 9.0, 12.5, and 16.7% at the surface pressures of 5, 15, and 35 mN/m. The monolayer compression isotherms indicated that the mixed monolayers at 5, 15, are 35 mN/m are mainly in the so-called "pancake", "mushroom", and "brush" states, respectively. The SFG spectra in the OH stretching vibration region give rise to SFG bands near 3200 and 3400 cm(-1). The mean molecular amplitude of the former band due to the OH stretching of the "icelike" water molecules associated mainly with the hydrophilic poly(ethylene oxide) (PEO) chains, exhibits appreciable decrease on compression of the mixed monolayers from 5 to 15 mN/m. The result corroborates the model for the pancake-mushroom transition, which presumes the dissolution of the PEO chains from the air-water interface to the water subphase. Further compression of the mixed monolayers to 35 mN/m causes a slight decrease of the line amplitude, which can be explained by considering a squeezing out of water molecules from the hydrophilic groups of DSPE-EO(45) in the brush state, where the PEO chains strongly interact with each other to form a tight binding state of the hydrophilic groups. The relative intensities of the SFG bands due to the CH3 asymmetric and symmetric vibrations were used to estimate the tilt angles of the terminal methyl group of DSPE, indicating that the angle increases with increasing the mole fraction of DSPE-EO(45). The angles almost saturate at the mole fraction larger than 10%, the saturation angle being nearly 90 degrees at 5 mN/m, ca. 60 degrees at 15 mN/m, and ca. 47 degrees at 35 mN/ m. Then, the introduction of the hydrophilic PEO head group causes a large tilting of the alkyl groups of DEPE in the mixed monolayers.     

Structural and topographical characteristics of adsorbed WPI and monoglyceride mixed monolayers at the air-water interface

In this work we have analyzed the structural and topographical characteristics of mixed monolayers formed by an adsorbed whey protein isolate (WPI) and a spread monoglyceride monolayer (monopalmitin or monoolein) on the previously adsorbed protein film. Measurements of the surface pressure (pi)-area (A) isotherm were obtained at 20 degrees C and at pH 7 for protein-adsorbed films from water in a Wilhelmy-type film balance. Since the surface concentration (1/A) is actually unknown for the adsorbed monolayer, the values were derived by assuming that the A values for adsorbed and spread monolayers were equal at the collapse point of the mixed film. The pi-A isotherm deduced for adsorbed WPI monolayer in this work is practically the same as that obtained directly by spreading. For WPI-monoglyceride mixed films, the pi-A isotherms for adsorbed and spread monolayers at pi higher than the equilibrium surface pressure of WPI are practically coincident, a phenomenon which may be attributed to the protein displacement by the monoglyceride from the interface. At lower surface pressures, WPI and monoglyceride coexist at the interface and the adsorbed and spread pi-A isotherms (i.e., the monolayer structure of the mixed films) are different. Monopalmitin has a higher capacity than monoolein for the displacement of protein from the air-water interface. However, some degree of interactions exists between proteins and monoglycerides and these interactions are higher for adsorbed than for spread films. The topography of the monolayer corroborates these conclusions.     

Modulated surface vibrational spectroscopy at the electrode—solution interface

Infrared spectroelectrochemistry can be used to examine reactions occurring at the electrode—solution interface. This vibrational probe can be applied to study the structure and orientation of molecules and the dynamics of adsorption—desorption processes at the electrode surface. The technique can reveal valuable information about the mechanisms and kinetics of surface reactions.     

Orientational motions of vibrational chromophores in molecules at the air/water interface with time-resolved sum frequency generation

The first time-resolved experiments in which interfacial molecules are pumped to excited electronic states and probed by vibrational sum frequency generation (SFG) are reported. This method was used to measure the out-of-plane rotation dynamics, i.e. time dependent changes in the polar angle, of a vibrational chromophore of an interfacial molecule. The chromophore is the carbonyl group, the rotation observed is that of the -C=O bond axis, with respect to the interfacial normal, and the interfacial molecule is coumarin 314 (C314) at the air/water interface. The orientational relaxation time was found to be 220+/-20 ps, which is much faster than the orientational relaxation time of the permanent dipole moment axis of C314 at the same interface, as obtained from pump-second harmonic probe experiments. Possible effects on the rotation of the -C=O bond axis due to the carbonyl group hydrogen bonding with interfacial water are discussed. From the measured equilibrium orientation of the permanent dipole moment axis and the carbonyl axis, and knowledge of their relative orientation in the molecule, the absolute orientation of C314 at the air/water interface is obtained.     

Structural properties and Raman spectroscopy of lipid Langmuir monolayers at the air-water interface

Spectra of octadecylamine (ODA) Langmuir monolayers and egg phosphatidylcholine (PC)/ODA-mixed monolayers at the air-water interface have been acquired. The organization of the monolayers has been characterized by surface pressure-area isotherms. Application of polarized optical microscopy provides further insight in the domain structures and interactions of the film components. Surface-enhanced Raman scattering (SERS) data indicate that enhancement in Raman spectra can be obtained by strong interaction between headgroups of the surfactants and silver particles in subphase. By mixing ODA with phospholipid molecules and spreading the mixture at the air-water interface, we acquired vibrational information of phospholipid molecules with surfactant-aided SERS effect.     

Structural and shear characteristics of adsorbed sodium caseinate and monoglyceride mixed monolayers at the air-water interface

The structural and shear characteristics of mixed monolayers formed by an adsorbed Na-caseinate film and a spread monoglyceride (monopalmitin or monoolein) on the previously adsorbed protein film have been analyzed. Measurements of the surface pressure (pi)-area (A) isotherm and surface shear viscosity (eta(s)) were obtained at 20 degrees C and at pH 7 in a modified Wilhelmy-type film balance. The structural and shear characteristics of the mixed films depend on the surface pressure and on the composition of the mixed film. At surface pressures lower than the equilibrium surface pressure of Na-caseinate (at pipi(e)(CS) have important repercussions on the shear characteristics of the mixed films.     

SINDO1 calculations of vibrational frequencies of adsorbed molecules

A scaling procedure is used for the force constants generated by the SINDO 1 method in internal coordinates to achieve better agreement with experimental frequencies of molecules. The procedure is subsequently used to calculate frequency shifts for adsorbed molecules. The results for CO₂ and CO adsorption at NaCl cluster surfaces are in good agreement with experimental data. © 1995 John Wiley & Sons, Inc.     

Hydroxyl radical at the air-water interface

Interaction of the hydroxyl radical with the liquid water surface was studied using classical molecular dynamics computer simulations. From a series of scattering trajectories, the thermal and mass accommodation coefficients of OH on liquid water at 300 K were determined to be 0.95 and 0.83, respectively. The calculated free energy profile for transfer of OH across the air-water interface at 300 K exhibits a minimum in the interfacial region, with the free energy of adsorbtion (DeltaGa) being about 1 kcal/mol more negative than the hydration free energy (DeltaGs). The propensity of the hydroxyl radical for the air-water interface manifests itself in partitioning of OH radicals between the bulk water and the surface. The enhancement of the surface concentration of OH relative to its concentration in the aqueous phase suggests that important OH chemistry may be occurring in the interfacial layer of water droplets, aqueous aerosol particles, and thin water films adsorbed on solid surfaces. This has profound consequences for modeling heterogeneous atmospheric chemical processes.