Transmission of electronic effects through the {closo-1-CB9} and {closo-1-CB11} cages: apparent dissociation constants for series of [closo-1-CB9H8-1-COOH-10-X] and [closo-1-CB11H10-1-COOH-12-X] acids

The apparent ionization constants pK(a)' for series of carboxylic acids [closo-1-CB(9)H(8)-1-COOH-10-X](-) (1) and [closo-1-CB(11)H(10)-1-COOH-12-X](-) (2), where X = H, I, n-C(6)H(13), (+)NMe(3), (+)N(2), (+)SMe(2), OC(5)H(11), were measured in EtOH/H(2)O (1/1, v/v) at 24 °C. Correlation analysis of the pK(a)' values using Hammett substituent constants σ(p)(X) gave the reaction constant ρ = 0.87 ± 0.04 for series 1 and ρ = 1.00 ± 0.09 for series 2. These values are higher than for derivatives of PhCH═CHCOOH (ρ = 0.70 ± 0.09 in 55% EtOH) and correspond to 56% and 65% efficiencies in transmission of electronic effects by [closo-1-CB(9)H(10)](-) (E) and [closo-1-CB(11)H(12)](-) (F), respectively, as compared to benzene (A). Experimental results were supported with DFT calculations of relative acidity for series of acids derived from A, E, and F in aqueous medium.     

Microwave-assisted alkylation of [CB11H12]- and related anions

A total of 19 permethylated derivatives of substituted [CB(11)H(12)](-) anions have been prepared using alkylation with microwave assistance. The reactions proceed much faster and more cleanly than under ordinary conditions. Microwave assistance is especially convenient for the permethylation of carborane anions carrying electron-withdrawing groups in positions 1 and/or 12. Even [1-F-CB(11)H(11)](-) can be undecamethylated, whereas under ordinary heating, it has only been hexamethylated.     

Monocarbaborane anion chemistry. The elusive C-arylated [PhCB11H11]-, [PhCB9H9]- and [PhCB8H8]- anions

B10H14 and PhCHO yield [6-Ph-nido-6-CB9H11]- (94%), from which the nine-vertex C-phenyl monocarbaborane anion [4-Ph-closo-4-CB8H8]- (68%) can be obtained by heating at 200 degrees C, and from which the twelve- and ten-vertex analogues [1-Ph-closo-1-CB11H11]- (50%) and [4-Ph-closo-4-CB9H9]- (25%) can be obtained by heating at 210 degrees C with BH3(NEt3).     

Unusual interaction of alkynes with nine-vertex arachno-monocarbaboranes 4-CB8H14 and [4-CB8H13]-

Alkynes R(1)R(2)C(2) react with the neutral monocarbaborane arachno-4-CB(8)H(14) (1) at elevated temperatures (115-120 degrees C) under the formation of the derivatives of the ten-vertex dicarbaborane nido-5,6-C(2)B(8)H(12) (2) of general formula 9-Me-5,6-R1,R2-nido-5,6-C(2)B(8)H(9) (where R1,R2 = H,H 2a; Me,Me 2b; Et,Et 2c, H,Ph 2d, and Ph,Ph 2e) in moderate yields (26-52%). Side reaction with PhC(2)H also yields 1-Ph-6-Me-closo-1,2-C(2)B(8)H(8) (3d). In contrast, the reaction between [arachno-4-CB(8)H(13)](-) anion ((-)) and PhC(2)H produces a mixture of the closo anions [1-CB7H8]- (4-) and [1-CB6H7]- (5-) (yields 32 and 24%, respectively). Individual compounds were isolated and purified by liquid chromatography and characterized by NMR spectroscopy ((11)B, (1)H and (13)C) combined with two-dimensional [(11)B-(11)B]-COSY and (1)H-{(11)B(selective)}NMR techniques.     

Theoretical study on the structure and formation mechanism of [C6H5Mm]- (M=Ag, Au; m=1-3)

The structures and formation mechanisms of the important intermediate phenyl-coinage metal complexes [C(6)H(5)M(m)](-) (M==Ag, Au, m = 1-3) are investigated at B3LYP//6-311G(d, p)/Lanl2dz level using Gaussian 03 program. The adiabatic electron affinity and vertical dissociation energy of [M(m)](-) and [C(6)H(5)M(m)](-) are calculated, which are excellently coincident with the experimental determination. The C(6)H(5) group bonds on metal clusters through M--C sigma bond in the complex [C(6)H(5)M(m)](-). The complexes [C(6)H(5)M(m)](-) (M==Ag, Au; m = 2-3) are generated through a stepwise reaction. The first step is a direct insertion reaction between [M(m)](-) (M==Ag, Au, m = 1-3) and C(6)H(6,) which leads to the generation of intermediate [C(6)H(5)M(m)H](-) (m = 1-3) with the activation and cleavage of C--H bond. The second step is the neutral metal atom abstracting the H atom to yield the product [C(6)H(5)M(m)](-).     

Silver-phosphine complexes of the highly methylated carborane monoanion [closo-1-H-CB11Me11]-

The synthesis of the silver(I) salt of the highly methylated carborane anion [closo-1-H-CB(11)Me(11)](-) is described, Ag[closo-1-H-CB(11)Me(11)] 1, which in the solid state shows close intermolecular Ag...H(3)C contacts. Addition of various monodentate phosphines to 1 results in the formation of the complexes (R(3)P)Ag[closo-1-H-CB(11)Me(11)] [R = Ph, 2; cyclohexyl (C(6)H(11)), 3; (3,5-Me(2)-C(6)H(3)), 4]. All these complexes show close intermolecular Ag.H(3)C contacts in the solid state that are considerably shorter than the sum of the van der Waals radius of methyl (2.00 A) and the ionic radius of silver(I) (1.29 A). For 2 and 3 there are other close intermolecular Ag...H(3)C contacts in the solid state, arising from proximate carborane anions in the crystal lattice. Addition of methyl groups to the periphery of the phosphine ligand (complex 4) switches off the majority of these interactions, leaving essentially a single cage interacting with the cationic silver-phosphine fragment through three CH(3) groups. In solution (CD(2)Cl(2)) Ag...H(3)C contacts remain, as evidenced by both the downfield chemical shift change and the significant line-broadening observed for the cage methyl signals. These studies also show that the metal fragment is fluxional over the surface of the cage. The Ag...H(3)C interactions in solution may be switched off by addition of a stronger Lewis base than [closo-1-H-CB(11)Me(11)](-). Thus, addition of [NBu(4)][closo-1-H-CB(11)H(5)Br(6)] to 2 affords (Ph(3)P)Ag[closo-1-H-CB(11)H(5)Br(6)], while adding Et(2)O or PPh(3) affords the well-separated ion-pairs [(Ph(3)P)(L)Ag][closo-1-H-CB(11)Me(11)] (L = OEt(2) 5, PPh(3) 6,) both of which have been crystallographically characterized. DFT calculations on 2 (at the B3LYP/DZVP level) show small energy differences between the possible coordination isomers of this compound, with the favored geometry being one in which the [(Ph(3)P)Ag](+) fragment interacts with three of the [BCH(3)] vertices on the lower surface of the cage, similar to the experimentally observed structure of 4.     

Cascade synthesis of polyoxygenated 6H,11H-[2]benzopyrano-[4,3-c][1]benzopyran-11-ones

2-(methoxymethoxymethyl)aryllead triacetates, obtained in situ from the corresponding arylboronic acids, reacted with 4-hydroxycoumarins, leading to 3-(2-methoxymethoxymethyl)aryl-4-hydroxycoumarin derivatives in good to high yields. These compounds underwent a cascade sequence of reactions, deprotection-halogenation-annulation, to afford polyoxygenated tetracyclic 6H,11H-[2]benzopyrano-[4,3-c] [1]benzopyran-11-ones in good yields. Some compounds showed a moderate cytotoxicity against human epithelial mammary HBL100 cells.     

Diphosphacarbollide analogues of the C5H5- anion: isolation of the nido-di- and triphosphacarboranes 7,8,9-P2CB8H10, [7,8,9-P2CB8H9]-, [7,8,10-P2CB8H9]-, and 7,8,9,10-P3CB7H8

Treatment of a solution of excess PCl(3) and PS (PS = "proton sponge" = 1,8-dimethylamino naphthalene) with arachno-4-CB(8)H(14) (1) in CH(2)Cl(2), followed by hydrolysis of the reaction mixture, resulted in the isolation of the eleven-vertex diphosphacarbaborane nido-7,8,9-P(2)CB(8)H(10) (2) (yield 34%) as the main product. Other products isolated from this reaction were the phosphacarboranes nido-7,8,9,10-P(3)CB(7)H(8) (3) (yield 5%) and closo-2,1-PCB(8)H(9) (4) (yield 15%). Compound 2 can be deprotonated by PS in CH(2)Cl(2) or NaH in diethyl ether to give the [nido-7,8,9-P(2)CB(8)H(9)](-) (2(-)()) anion, which gives back the original compound, 2, upon re-protonation. Thermal rearrangement of anion 2(-) (Na(+) salt) at 350 degrees C for 2 h produced the isomeric [nido-7,8,10-P(2)CB(8)H(9)](-) (5(-)()) anion, which was isolated as a PPh(4)(+) salt (yield 86%). Multinuclear ((1)H, (11)B, (31)P, and (13)C), two-dimensional [(11)B-(11)B] COSY, (1)H{(11)B(selective)}, (1)H{(31)P(selective)}, and gradient-enhanced ([(1)H-(13)C] HSQC) magnetic resonance measurements led to complete assignments of all resonances which are in excellent agreement with the structures proposed. Coupling constants, (1)J((31)P,(13)C), (2)J((31)P,C,(1)H), and (1)J((31)P,(31)P), were calculated using the DFT method B3LYP/6-311+G(d,p). The molecular geometries of all compounds were optimized ab initio at a correlated level of theory (RMP2(fc)) using the 6-31G basis set, and their correctness was assessed by comparison of the experimental (11)B and (13)C chemical shifts with those calculated by the GIAO-SCF/II//RMP2(fc)/6-31G method. The computations also include the structures and chemical shieldings of the still unknown isomers [nido-7,10,8-P(2)CB(8)H(9)](-) (6(-)) and [nido-7,9,8-P(2)CB(8)H(9)](-) (7(-)).     

Convenient C-alkylation of the [HCB11Cl11]- carborane anion

A method for C-alkylation of [HCB(11)Cl(11)](-) anions using potassium tert-butoxide and alkyl iodides in tert-butanol is presented. Trimethylammonium salts of the corresponding C-alkylated derivatives are easily isolated and obtained in good yields.     

Syntheses and crystal structures of the closo-borates M2[B7H7] and M[B7H8] (M = PPh4, PNP, and N(n-Bu4)): the missing crystal structure in the series [B(n)H(n)]2- (n = 6-12)

Oxidation of [N(n-Bu(4))](2)[B(9)H(9)] with oxygen in a mixture of dimethoxyethane and CH(2)Cl(2) leads to salts of the [B(7)H(7)](2-) dianion. This is the first convenient synthesis for a seven-vertex hydro-closo-borate anion. Protonation with NEt(3)·HCl resulted in salts of the [B(7)H(8)](-) monoanion. Both closo-borate anions were isolated and characterized by (1)H, (1)H{(11)B}, (11)B, and (11)B{(1)H} NMR spectroscopy. The temperature-dependent (1)H{(11)B}, (11)B, and (11)B{(1)H} NMR spectra of [B(7)H(8)](-) were also measured. The structure of [B(7)H(7)](2-) as well as of [B(7)H(8)](-) were determined by single-crystal X-ray diffraction.     

Monocarbaborane anion chemistry. [COOH], [CH2OH] and [CHO] units as functional groups on ten-vertex monocarbaborane anionic compounds

B(10)H(14) reacts with para-C(6)H(4)(CHO)(COOH) in aqueous KOH solution to give the [nido-6-CB(9)H(11)-6-(C(6)H(4)-para-COOH)](-) anion 1, which undergoes cage closure with iodine in alkaline solution to give the [closo-2-CB(9)H(9)-2-(C(6)H(4)-para-COOH)](-) anion 2. Upon heating, anion 2 rearranges to form the [closo-1-CB(9)H(9)-1-(C(6)H(4)-para-COOH)](-) anion 3. Similarly, B(10)H(14) with glyoxylic acid OHCCOOH in aqueous KOH gives the [arachno-6-CB(9)H(13)-6-(COOH)](-) anion 4, which undergoes cage closure with iodine in alkaline solution to give the [closo-2-CB(9)H(9)-2-(COOH)](-) anion 5. Upon heating, anion 5 rearranges to give the [closo-1-CB(9)H(9)-1-(COOH)](-) anion 6. Reduction of the [COOH] anions 3 and 6 with diisobutylaluminium hydride gives the [CH(2)OH] hydroxy anions [closo-1-CB(9)H(9)-1-(C(6)H(4)-para-CH(2)OH)](-) and [closo-1-CB(9)H(9)-1-(CH(2)OH)](-) 8 respectively. The [closo-1-CB(9)H(9)-1-(C(6)H(4)-para-CH(2)OH)](-) anion 7 can also be made via isomerisation of the [closo-2-CB(9)H(9)-2-(C(6)H(4)-para-CH(2)OH)](-) anion 9, in turn obtained from the [nido-6-CB(9)H(11)-6-(C(6)H(4)-para-CH(2)OH)](-) anion 10, which is obtained from the reaction of B(10)H(14) with terephthaldicarboxaldehyde, C(6)H(4)-para-(CHO)(2), in aqueous KOH solution. Oxidation of the hydroxy anions 7 and 8 with pyridinium dichromate gives the aldehydic [closo-1-CB(9)H(9)-1-(C(6)H(4)-para-CHO)](-) anion 11 and the aldehydic [closo-1-CB(9)H(9)-1-(CHO)](-) anion 12 respectively, characterised as their 2,4-dinitrophenylhydrazone derivatives, the [closo-1-CB(9)H(9)-1-C(6)H(4)-para-CH=N-NHC(6)H(3)(NO(2))(2)](-) anion 13 and the [closo-1-CB(9)H(9)-1-CH=N-NHC(6)H(3)(NO(2))(2)](-) anion respectively.     

Cationic rhodium mono-phosphine fragments partnered with carborane monoanions [closo-CB11H6X6]- (X = H, Br). Synthesis, structures and reactivity with alkenes

Addition of the new phosphonium carborane salts [HPR(3)][closo-CB(11)H(6)X(6)] (R = (i)Pr, Cy, Cyp; X = H 1a-c, X = Br 2a-c; Cy = C(6)H(11), Cyp = C(5)H(9)) to [Rh(nbd)(mu-OMe)](2) under a H(2) atmosphere gives the complexes Rh(PR(3))H(2)(closo-CB(11)H(12)) 3 (R = (i)Pr 3a, Cy 3b, Cyp 3c) and Rh(PR(3))H(2)(closo-CB(11)H(6)Br(6)) 4 (R = (i)Pr 4a, Cy 4b, Cyp 4c). These complexes have been characterised spectroscopically, and for 4b by single crystal X-ray crystallography. These data show that the {Rh(PR(3))H(2)}(+) fragment is interacting with the lower hemisphere of the [closo-CB(11)H(6)X(6)](-) anion on the NMR timescale, through three Rh-H-B or Rh-Br interactions for complexes 3 and 4 respectively. The metal fragment is fluxional over the lower surface of the cage anion, and mechanisms for this process are discussed. Complexes 3a-c are only stable under an atmosphere of H(2). Removing this, or placing under a vacuum, results in H(2) loss and the formation of the dimer species Rh(2)(PR(3))(2)(closo-CB(11)H(12))(2) 5a (R = (i)Pr), 5b (R = Cy), 5c (R = Cyp). These dimers have been characterised spectroscopically and for 5b by X-ray diffraction. The solid state structure shows a dimer with two closely associated carborane monoanions surrounding a [Rh(2)(PCy(3))(2)](2+) core. One carborane interacts with the metal core through three Rh-H-B bonds, while the other interacts through two Rh-H-B bonds and a direct Rh-B link. The electronic structure of this molecule is best described as having a dative Rh(I) --> Rh(III), d(8)--> d(6), interaction and a formal electron count of 16 and 18 electrons for the two rhodium centres respectively. Addition of H(2) to complexes 5a-c regenerate 3a-c. Addition of alkene (ethene or 1-hexene) to 5a-c or 3a-c results in dehydrogenative borylation, with 1, 2, and 3-B-vinyl substituted cages observed by ESI-MS: [closo-(RHC[double bond, length as m-dash]CH)(x)CB(11)H(12-x)](-)x = 1-3, R = H, C(4)H(9). Addition of H(2) to this mixture converts the B-vinyl groups to B-ethyl; while sequential addition of 4 cycles of ethene (excess) and H(2) to CH(2)Cl(2) solutions of 5a-c results in multiple substitution of the cage (as measured by ESI-MS), with an approximately Gaussian distribution between 3 and 9 substitutions. Compositionally pure material was not obtained. Complexes 4a-c do not lose H(2). Addition of tert-butylethene (tbe) to 4a gives the new complex Rh(P(i)Pr(3))(eta(2)-H(2)C=CH(t)Bu)(closo-CB(11)H(6)Br(6)) 6, characterised spectroscopically and by X-ray diffraction, which show coordination of the alkene ligand and bidentate coordination of the [closo-CB(11)H(6)Br(6)](-) anion. By contrast, addition of tbe to 4b or 4c results in transfer dehydrogenation to give the rhodium complexes Rh{PCy(2)(eta(2)-C(6)H(9))}(closo-CB(11)H(6)Br(6)) 7 and Rh{PCyp(2)(eta(2)-C(5)H(7))}(closo-CB(11)H(6)Br(6)) 9, which contain phosphine-alkene ligands. Complex has been characterised crystallographically.     

A novel zirconium polyoxometalate complex that contains both a coordinated saturated anion, [PMo12O40]3-, and a coordinated unsaturated anion, [PMo11O39]7-

The novel 8-coordinate zirconium compound (NH(4))(6)[Zr(PMo(12)O(40))(PMo(11)O(39))].26H(2)O (1) has been synthesized and characterized by single-crystal X-ray diffraction, elemental analysis, and vibrational and (31)P NMR spectroscopy. It is the first example of a metal complex containing both parent, [PMo(12)O(40)](3)(-), and monovacant lacunary, [PMo(11)O(39)](7)(-), anions. Furthermore, this is the first crystallographic determination of the [PMo(11)O(39)](7)(-) anion.     

Square-planar coordinated polyanions of palladium, platinum, and gold stannaborate [SnB11H11]2- coordination chemistry

The tetrasubstituted polyanions of platinum, palladium, and gold [M(SnB(11)H(11))(4)](x-) (x=6, M=Pd, Pt; x=5, M=Au) have been prepared and characterized by single-crystal X-ray diffraction, elemental analysis, IR, Raman, (11)B, and (119)Sn heteronuclear NMR spectroscopy. In the case of the platinum derivative [Bu(3)MeN](6)[Pt(SnB(11)H(11))(4)] (2) (119)Sn M?ssbauer spectroscopy has been carried out. The isolated salts are stable towards moisture and air and the complexes 2 and 3 were treated with 1,3-bis(diphenylphosphino)propane (dppp) to give the respective substitution products [Bu(3)MeN](2)[(dppp)M(SnB(11)H(11))(2)] (M=Pd, Pt).     

Cation-directed synthesis of tungstosilicates. 1. Syntheses and structures of K10A-alpha-[SiW9O34].24H2O,of the sandwich-type complex K10.75[Co(H2O)6]0.5[Co(H2O)4Cl]0.25A-alpha-[K2(Co(H2O)2)3(SiW9O34)2].32H2O and of Cs15[K(SiW11O39)2].39H2O

The influence of the nature of alkali metal cations on the structure of the species obtained from the trivacant precursor A-alpha-[SiW(9)O(34)](10-) has been studied. Starting from the potassium salt 1, K(10)A-alpha-[SiW(9)O(34)].24H(2)O, the sandwich-type complex 2, K(10.75)[Co(H(2)O)(6)](0.5)[Co(H(2)O)(4)Cl](0.25)A-alpha-[K(2)(Co(H(2)O)(2))(3)(SiW(9)O(34) )(2)].32H(2)O, has been obtained. The crystal structures of these two compounds consist of two A-alpha-[SiW(9)O(34)](10-) anions linked by a set of potassium (1) or cobalt plus potassium cations (2), and the relative orientation of the two half-anions is the same. Attempts to link two A-alpha-[SiW(9)O(34)](10-) anions by tungsten atoms instead of cobalt failed whatever the alkali metal cation. Moreover, the nondisordered structure of Cs(15)[K(SiW(11)O(39))(2)].39H(2)O is described. Two [SiW(11)O(39)](8-) anions are linked through a potassium cation with a "trans-oid" conformation, and the potassium occupies a cubic coordination site.     

Controlled direct synthesis of C-mono- and C-disubstituted derivatives of [3,3'-Co(1,2-C2B9H11)2]- with organosilane groups: theoretical calculations compared with experimental results

Mono- and dilithium salts of [3,3'-Co(1,2-C(2)B(9)H(11))(2)](-), (1(-)), react with different chlorosilanes (Me(2)SiHCl, Me(2)SiCl(2), Me(3)SiCl and MeSiHCl(2)) with an accurate control of the temperature to give a set of novel C(c)-mono- (C(c) = C(cluster)) and C(c)-disubstituted cobaltabis(dicarbollide) derivatives with silyl functions: [1-SiMe(2)H-3,3'-Co(1,2-C(2)B(9)H(10))(1',2'-C(2)B(9)H(11))](-) (3(-)); [1,1'-mu-SiMe(2)-3,3'-Co(1,2-C(2)B(9)H(10))(2)](-) (4(-)); [1,1'-mu-SiMeH-3,3'-Co(1,2-C(2)B(9)H(10))(2)](-) (5(-)); [1-SiMe(3)-3,3'-Co(1,2-C(2)B(9)H(10))(1',2'-C(2)B(9)H(11))](-) (6(-)) and [1,1'-(SiMe(3))(2)-3,3'-Co(1,2-C(2)B(9)H(10))(2)](-) (7(-)). In a similar way, the [8,8'-mu-(1',2'-C(6)H(4))-1,1'-mu-SiMe(2)-3,3'-Co(1,2-C(2)B(9)H(9))(2)](-) (8(-)); [8,8'-mu-(1',2'-C(6)H(4))-1,1'-mu-SiMeH-3,3'-Co(1,2-C(2)B(9)H(9))(2)](-) (9(-)) and [8,8'-mu-(1',2'-C(6)H(4))-1-SiMe(3)-3,3'-Co(1,2-C(2)B(9)H(9))(1',2'-C(2)B(9)H(10))](-) (10(-)) ions have been prepared from [8,8'-mu-(1',2'-C(6)H(4))-3,3'-Co(1,2-C(2)B(9)H(10))(2)](-) (2(-)). Thus, depending on the chlorosilane, the temperature and the stoichiometry of nBuLi used, it has been possible to control the number of substituents on the C(c) atoms and the nature of the attached silyl function. All compounds were characterised by NMR and UV/Vis spectroscopy and MALDI-TOF mass spectrometry; [NMe(4)]-3, [NMe(4)]-4 and [NMe(4)]-7 were successfully isolated in crystalline forms suitable for X-ray diffraction analyses. The 4(-) and 8(-) ions, which contain one bridging -mu-SiMe(2) group between each of the dicarbollide clusters, were unexpectedly obtained from the reaction of the monolithium salts of 1(-) and 2(-), respectively, with Me(2)SiHCl at -78 degrees C in 1,2-dimethoxyethane. This suggests that an intramolecular reaction has taken place, in which the acidic C(c)-H proton reacts with the hydridic Si-H, with subsequent loss of H(2). Some aspects of this reaction have been studied by using DFT calculations and have been compared with experimental results. In addition, DFT theoretical studies at the B3 LYP/6-311G(d,p) level of theory were applied to optimise the geometries of ions 1(-)-10(-) and calculate their relative energies. Results indicate that the racemic mixtures, rac form, are more stable than the meso isomers. A good concordance between theoretical studies and experimental results has been achieved.     

Formation of two isomeric closo-[(eta5-C5H5)FePC2B8H10] phosphadicarbaborane analogues of ferrocene via isolable eta1-bonded complexes of the [7-[(eta5-C5H5)Fe(CO)2]-(eta1-nido-PC2B8H10)] type

The reaction of nido-[7,8,9-PC(2)B(8)H(11)] (1) with [[CpFe(CO)(2)](2)] (Cp=eta(5)-C(5)H(5) (-)) in benzene (reflux, 3 days) gave an eta(1)-bonded complex [7-Fp-(eta(1)-nido-7,8,9,-PC(2)B(8)H(10))] (2; Fp=CpFe(CO)(2); yield 38 %). A similar reaction at elevated temperatures (xylene, reflux 24 h) gave the isomeric complex [7-Fp-(eta(1)-nido-7,9,10-PC(2)B(8)H(10))] (3; yield 28 %) together with the fully sandwiched complexes [1-Cp-closo-1,2,4,5-FePC(2)B(8)H(10)] 4 a (yield 30%) and [1-Cp-closo-1,2,4,8-FePC(2)B(8)H(10)] 4 b (yield 5%). Compounds 2 and 3 are isolable intermediates along the full eta(5)-complexation pathway of the phosphadicarbaborane cage; their heating (xylene, reflux, 24 h) leads finally to the isolation of compounds 4 a (yields 46 and 52%, respectively) and 4 b (yields 4 and 5%, respectively). Moreover, compound 3 is isolated as a side product from the heating of 2 (yield 10%). The structure of compound 4 a was determined by an X-ray structural analysis and the constitution of all compounds is consistent with the results of mass spectrometry and IR spectroscopy. Multinuclear ((1)H, (11)B, (31)P, and (13)C), two-dimensional [(11)B-(11)B]-COSY, and (1)H[(11)B(selective)] magnetic resonance measurements led to complete assignments of all resonances and are in excellent agreement with the structures proposed.     

Syntheses and crystal structures of the closo-borate M[B8H9] (M = [PPh4]+ and [N(n-Bu4)]+)

Protonation of M(2)[B(8)H(8)] with HCl or NEt(3)·HCl resulted in M[B(8)H(9)] (M = [PPh(4)](+) or [N(n-Bu(4))](+)). The monoanion was isolated and characterized by (1)H, (1)H{(11)B}, (11)B, and (11)B{(1)H} NMR spectroscopy. The "protonated" form [B(8)H(9)](-) showed a dynamic behavior in solution, which was analyzed by NMR spectroscopy and compared with theoretical calculations. The structures of [B(8)H(9)](-) as well as [B(8)H(8)](2-) were determined by single-crystal X-ray diffraction.     

Experimental and theoretical study of the regiospecific coordination of RuII and OsII fragments on the lacunary polyoxometalate [alpha-PW11O39]7-

New Ru(II) and Os(II) derivatives of the monovacant [alpha-PW(11)O(39)](7-) anion ([PW(11)O(39){M(DMSO)(3)(H(2)O)}](5-) (M = Ru (1), Os (2)) and [PW(11)O(39){Os(eta(6)-p-cym)(H(2)O)}](5-) (3)) have been synthesized and characterized. The binding mode of the d(6)-{M(II)L(3)(H(2)O)}(2+) moieties in these compounds is similar to that in the previously described [PW(11)O(39){Ru(eta(6)-p-cym)(H(2)O)}](5-) (4) complex: bidentate, on two nonequivalent oxygen atoms of the lacuna, leading to a loss of the C(s) symmetry of the parent anion, which thus plays the role of a prochiral bidentate ligand. The density functional theory (DFT) (B3PW91) computation of the lowest unoccupied molecular orbitals of the {ML(3)(H(2)O)}(2+) (M = Os, Ru; L(3) = fac-(DMSO)(3), eta(6)-C(6)H(6)) fragments reveals the similarities between their electrophilic properties. The origin of the regioselectivity of the grafting was investigated through a DFT (B3PW91) analysis of (i) the highest occupied molecular orbital of [alpha-PW(11)O(39)](7-) and (ii) the relative energies of the different potential regioisomers obtained by a bidentate grafting of the {ML(3)(H(2)O)}(2+) moiety onto the lacuna of [alpha-PW(11)O(39)](7-). The role of the water ligand in the stabilization of this peculiar structure was studied.     

Salts of the Lewis-acidic dianion [Hg(closo-1-CB11F11)2]2-: coordination of acetonitrile and water

The coordination of acetonitrile and water to the Hg atom in [Hg(closo-1-CB(11)F(11))(2)](2-) (1) reveals the Lewis acidity of the Hg(II) center, which is unprecedented, since 1 is a dianion. Both coordination compounds were characterized by single-crystal X-ray diffraction, vibrational spectroscopy, and differential scanning calorimetry (DSC). In contrast, the Hg atom in [PhHg(closo-1-CB(11)F(11))](-) (2) does not coordinate to CH(3)CN and H(2)O, although it has only a single negative charge.