离子缔合作用

离子缔合作用杨家振，孙柏，宋彭生（辽宁大学化学系沈阳１１００３６）（中科院青海盐湖研究所西宁８１０００８）水广泛的存在于自然界之中，许多重要的无机，分析和生化反应都包活有电解质，并且很容易在水溶液中进行。因此，电解质溶液一直是物理化学研究的中心课题，...     

疏水性咪唑类混合离子液体的物理化学性质

本文选取疏水性和疏水性离子液体混合物作为研究对象, 将疏水性离子液体1-甲基-3-n-丁基咪唑三氟甲基磺酰胺盐[BMImN(CF3SO2)2]与BMImPF6以不同的比例进行混合, 对混合离子液体及其相应单组分离子液体进行了相关物理化学性质的测试和对比, 讨论由于混合导致的物理化学效应.     

短链羟基甲基咪唑离子液体的合成与电化学性能

通过2-(2-氯乙氧基)乙醇和2-溴乙醇分别与1-甲基咪唑反应,合成乙醇基甲基咪唑溴(EMIMBr)和乙氧基乙醇基甲基咪唑氯(EEMIMCl)2种羟基咪唑离子液体,用1H NMR和FT-IR表征结构,TG和DSC进行热性能测试,并研究了其电化学性能.结果表明,羟基类咪唑离子液体具有高的热稳定性,这种含醚氧键和羟基的短链离子液体有利于电导率的提高,导电机理符合Vogel-Tmman-Fulcher (VTF)方程.乙醇基甲基咪唑溴和乙氧基乙醇基甲基咪唑氯的室温电导率分别为1.2×10-4和1.7×10-4 S/cm.对于碳酸丙二醇酯、乙氧基乙醇基甲基咪唑氯和钾盐体系,室温电导率最高可达3.82×10-3 S/cm.乙氧基乙醇基甲基咪唑氯的电化学窗口为3.4V.     

离子液体的黏度与其扩散系数和电导率的新型关系方程

离子液体的传递性质对其在化学化工等领域的研究和应用至关重要,但迄今文献中缺乏可靠的理论预测模型或传递性质间的相互关系式,因此,有必要建立传递性质间的相互关系以便应用.本文建立了离子液体黏度与扩散系数或电导率间的定量关系,并利用文献实验数据进行了系统检验.结果表明,新方程可由离子液体黏度数据准确预测其扩散系数和电导率.与Stokes-Einstein方程相比,新方程不仅可解释离子液体中的许多实验现象,而且实现了定量预测(无需离子的有效流体力学半径数据).     

降水离子浓度总和与电导率的关系

利用广东省中山市2001年的降水监测数据，将降水的电导率（Y）对降水中离子浓度的总和（X）进行一元线性回归，得回归方程为Y＝20.16 223.9X。经相关系数和回归系数显著性检验表明，在99．9％的置信水平下，两者线性相关显著。     

LiCl-Urea两元体系离子液体的研究

自从1914年第一种离子液体[EtNH3]NO3问世以来,室温离子液体的研究与应用取得了飞速的发展,离子液体以其诸多的优良性能,在催化、有机反应、萃取、以及气相色谱、电化学中得到了广泛地应用。近几年来,多元离子液体体系的研究受到关注。本文报导了由LiCl简单盐和Urea形成的二元体系离子液体,最低共熔点为55℃(LiCl的熔点是608℃,尿素本身的熔点是132℃)。     

离子液体-分子溶剂混合体系中电导率的测量与关联

在298.15K下测定了1-正丁基-3-甲基咪唑四氟硼酸盐([Bmim][BF₄])和1-正丁基-3-甲基咪唑六氟磷酸盐([Bmim][PF₆])与不同分子溶剂混合体系的电导率。结果表明, 随着分子溶剂浓度的增大，离子液体的摩尔电导率逐渐增大，离子液体在溶液中的摩尔电导率可以用纯离子液体的摩尔电导率、分子溶剂的介电常数和摩尔体积进行关联。     

两种疏水型膦类离子液体的密度、动力粘度及电导率

Two air and water stable hydrophobic phosphonium ionic liquids (ILs), tributyl-hexylphosphonium tetrafluoroborate ([P4446][BF4]) and tributyl-hexylphosphonium bis (trifluoromethylsulfonyl) imide ([P4446][NTf2]), were prepared by the traditional method. Their basic physico-chemical properties of density, dynamic viscosity, and electrical conductivity were measured in the temperature range of 283.15-353.15 K. The effect of the temperature and structure of the anion on the thermodynamic properties were discussed. The properties are compared with the cation structures changing of the phosphonium type ILs. The most important thermodynamic properties for their practical application, such as molecular volume, standard molar entropy, and lattice energy, were calculated from their density using empirical equations. The calculated values were compared with those of imdazolium and pyridinium type ILs. Molar electrical conductivity was determined from density and electrical conductivity. The applicability of the Vogel-Fulcher-Tamman (VFT) and Arrhenius equations to the fitting of the dynamic viscosity and electrical conductivity was validated. The activation of the electrical conductivity and dynamic viscosity were obtained from the final VFT equation. According to the Walden rule, the density, dynamic viscosity, and electrical conductivity were described by the Walden equation. The results are very important for academic studies as well as industrial applications of these ILs.     

交替马来酸酐共聚物多缩乙二醇酯盐络合物的离子传导性

交替马来酸酐共聚物多缩乙二醇酯盐络合物的离子传导性丁黎明，林云青，周子南，王佛松（中国科学院长春应用化学研究所，长春，１３００２２）关键词高分子固体电解质，离子电导率，玻璃化转变温度，离子传输，ＶＴＦ方程１９７３年，Ｐ．Ｖ．Ｗｒｉｇｈｔ等人［１］首次...     

咪唑型离子液体与牛血清蛋白的缔合特性

通过紫外-可见光谱、荧光光谱、同步荧光光谱、圆二色谱、衰减全反射红外光谱、负染-透射电镜、等温滴定微量热等实验方法系统地探讨了咪唑型离子液体与牛血清蛋白(BSA)的缔合特性.结果发现,离子液体[Bmim]Cl的加入使得BSA的紫外吸收强度增加,同时也会导致其荧光猝灭,并且这种猝灭是静态猝灭.同步荧光的研究结果表明,[Bmim]Cl分子可与蛋白质中接近色氨酸残基的区域发生相互作用,使蛋白质的构象和内部的疏水结构发生改变;负染色法透射电镜直观地显示了加入离子液体后形成的蛋白质-离子液体复合物结构逐渐变大;圆二色谱和衰减全反射红外光谱表明:在离子液体与BSA缔合过程中,离子液体的加入使得BSA二级结构中的α-螺旋和β-折叠的含量降低,从而引起蛋白质二级结构的变化;表面张力法和等温滴定微量热法进一步证实上述缔合作用为静电作用和疏水作用共同作用的结果,但离子液体的烷基链与BSA疏水内腔之间的疏水作用是离子液体与BSA缔合的主要驱动力.     

First Binary Mixture Ionic Liquids Containing EMIMBr and IM

A new series of binary mixture ionic liquids comprising 1-ethyl-3-methylimidozalium bromide(EMIMBr) and imidazole(IM) have been synthesized.The melting prints of the ionic liquids vary with te different content of IM while they still keey satisfactory conductivity and viscosity.According to the analysis of its phase diagram,the cutectic point is about 16.5℃ with the mass percentage of IM 29%.     

Excess Molar Polarization in Binary Mixtures of Polar Liquids

Abstract

Excess Molar Polarizations (ΔP _W.Q., ΔP _D.D.) have been evaluated in the binary mixture of associated + associated and associated + nonassociated polar liquids using Winkelmann-Quitzsch and Davis-Douheret equations. It is observed that Winkelmann-Quitzsch equation ΔP _W.Q. is the more appropriate one for interpretation of dynamic characteristics of the molecular association in a liquid mixture.     

阴离子为羧酸根和芳环共轭的离子液体在染料敏化太阳能电池中的应用

提出了利用p-π共轭效应设计离子液体的方法, p-π共轭效应可以有效分散阴离子的负电荷, 降低离子液体中阴阳离子之间的库仑引力, 以得到低粘度的离子液体. 所设计的离子液体为1-乙基-3-甲基咪唑苯甲酸(EMIB)和1-乙基-3-甲基咪唑异烟酸(EMIIN) (它们的阴离子中羧酸根和芳环为p-π共轭结构), 这两种离子液体都达到了较低的粘度(EMIB为42 mPa·s, EMIIN为27 mPa·s). 进一步将这两种离子液体做成电解质, 应用在染料敏化太阳能电池中, 通过优化电解质的组成, EMIB基电解质达到了1.43 mS·cm^-1的电导率和1.45×10^-7cm²·s^-1的I₃^?的扩散系数, 而EMIIN基电解质的电导率和I₃^?扩散系数分别为1.63 mS·cm^-1和2.01×10^-7 cm²·s^-1,后者电导性能的提高主要和EMIIN粘度较低有关系. 进一步将这两种电解质组装成电池, 在300 W·m^-2的光强下测得EMIB基电池和EMIIN基电池的效率分别为2.85%和4.30%.     

Synthesis of Oxygen‐Containing Spirobipyrrolidinium Salts for High Conductivity Room Temperature Ionic Liquids

Synthesis of ionic liquids (IL) based on oxygen‐containing spirobipyrrolidinium salts with BF₄, BF₃C₂F₅, and NTf₂ as counterions was undertaken. Their physical and electrochemical properties were evaluated for suitability for Room Temperature Ionic Liquids (RTIL) application. Reduction in melting point occurred upon exchange of C(2) by an O‐atom of spirobipyrrolidinium, without sacrificing the electrochemical stability; while introduction of alkyl groups between the N‐ and O‐atoms led to incorporation of asymmetry, and hence reduced the melting points, and viscosity.     

电导法确定二元体系中离子的浓度

本文从电化学基本原理出发,推导出稀溶液中二元混合组分的电导与各组分当量浓度的关系,并通过测定纯组分的电导－当量浓度标准曲线,来确定二元混合组分的标准曲线在对其中一组分浓度确定的基础上,可很容易计算另一组分的浓度。该法简便、快速,有望成为化学分析和仪器分析的一个很好的补充。     

Photochemical Schiemann Reaction in Ionic Liquids

Photochemical Schiemann reactions of imidazole derivatives 1 and 4 were carried out in 1-butyl-3-methylimidazolium tetrafluoroborate ionic liquid [bmim][BF₄] as solvent. The effects of temperature, co-solvent and wavelength on the rate of the reaction and product yield were examined. The use of ionic liquid increases the yield of the photochemical fluorodediazoniation reaction of 2 at 0 °C. Careful temperature control is necessary to minimize the photodecomposition of the ionic liquid in order to increase the yield of product.     

IC Determination of Halide Impurities in Ionic Liquids

An ion chromatographic (IC) method has been developed for determination of trace levels of halide impurities in various types of ionic liquids (ILs). The advantage of this method is that all relevant halide species can be measured in a single chromatographic analysis. Separation of halides was performed on a Dionex AS9-HC column using an eluent consisting of 20 mM NaOH and 10% (v/v) acetonitrile, delivered at 1.5 mL min⁻¹. Using this eluent, fluoride, chloride and bromide were well resolved from each other, but iodide was co-eluted with tetrafluoroborate (BF₄⁻) present as a counter-anion in tetrafluoroborate-based ILs. The same eluent was also used successfully for the determination of halides in highly hydrophobic ILs, such as those based on bis-(trifluoromethanesulfonyl)imide (TFSI⁻) and bis-perfluoroethylsulfonylimide (BETI⁻). In this case, 50% (v/v) acetonitrile aqueous was needed to dissolve the sample before injection, and this did not adversely affect the separation. Detection limits in the measured solution were 0.1, 0.2 and 1.0 ppm for chloride, bromide and iodide, respectively, by conductivity detection, and 0.02 ppm for iodide by UV detection.     

A Cryptate Reference Electrode for Ionic Liquids

The cryptate electrode (Ag/Ag⁺222), prepared by immersing silver wire in a solution of silver(I) salt and the cryptand 222 (4,7,13,16,21,24‐hexaoxa‐1,10‐diazabicyclo[8.8.8]hexacosane) in ionic liquids have been studied. The potential of the electrode is stabilized by the equilibrium of the Ag⁺ ion complexation by the cryptand, similarly to the potential stabilization by the ionic product of slightly soluble salts, used in aqueous electrodes of the second kind. The Ag/Ag⁺222 cryptate electrode (concentration of the cryptate was much higher than the silver(I) cation concentration, [222]>[Ag⁺]) may be used as a reference electrode in room temperature ionic liquids. The potential of the Ag/Ag⁺222 electrode is less sensitive to the presence of impurities, such as halides or water, in comparison to the Ag/Ag⁺ electrode. After anodic or cathodic polarization, the potential of the Ag/Ag⁺222 electrode comes back to the initial open circuit potential quickly. Preparation of the Ag/Ag⁺222 reference electrode is very easy: a silver wire is immersed in a solution of Ag⁺ salt and cryptand 222 (both available commercially) in the ionic liquid under study.     

利用离子液体制备纤维素基气凝胶

纤维素基气凝胶材料的研究在近年来吸引了人们极大的关注,这是因为这类新型材料具有通常无机气凝胶的典型结构特点,如超轻、高孔率、高比表面积等,同时具有天然生物质材料的原料丰富、可再生、可生物降解的优点。本文首先简要介绍了纤维素基气凝胶材料及其发展概况,进而主要介绍了以离子液体为溶剂制备再生纤维素基气凝胶的研究进展,包括纤维素基气凝胶的制备方法、结构及其功能性。最后对离子液体法制备的纤维素基气凝胶材料的前景进行了简要的展望。     

Solvatochromic Parameters and Preferential Solvation Behavior for Binary Mixtures of 1,3-Dialkylimidazolium Ionic Liquids with Water

Binary mixtures of 1,3-dialkylimidazolium based ionic liquids (ILs) and water were selected as solvent systems to investigate the solute-solvent and solvent-solvent interactions on the preferential solvation of solvatochromic indicators at 25℃. Empirical solvatochromic parameters, dipolarity/polarizability (π^*), hydrogen-bond donor acidity (α), hydrogen-bond acceptor basicity (β), and Reichardt's polarity parameters (E_T^N) were measured from the ultraviolet-visible spectral shifts of 4-nitroaniline, 4-nitroanisole, and Reichardt's dye. The solvent properties of the IL-water mixtures were found to be influenced by IL type and IL mole fraction (x_IL). All these studied systems showed the non-ideal behavior. The maximum deviation to ideality for the solvatochromic parameters can be obtained in the xIL range from 0.1 to 0.3. For most of the binary mixtures, the π^* values showed the synergistic effects instead of the E_T^N, α and β values. The observed synergy extent was dependent on the studied systems, such as the dye indicator and IL type. A preferential solvation model was utilized to gather information on the molecular interactions in the mixtures. The dye indicator was preferentially solvated on the following trend: IL >IL-water complex >water.