ITO上AuPd合金和Au阵列图案的制备及电催化活性的SECM表征

利用电化学湿法印章技术在氧化铟锡(ITO)导电玻璃上制备AuPd合金和Au的双组分阵列图案.采用具有微浮雕图案的琼脂糖印章存储足够多的溶液,并通过控制电沉积的时间来控制图案厚度.应用场发射扫描电子显微镜(FE-SEM),X射线能谱分析(EDX)和原子力显微镜(AFM)分别对ITO表面上的AuPd合金和Au的形貌和组分进行表征,并通过循环伏安(CV)技术和扫描电化学显微镜(SECM)研究比较了Au和AuPd合金的催化活性.利用扫描电化学显微镜(SECM)的针尖产生-基底收集(TG-SC)模式和氧化还原竞争(RC)模式,发现Au电极对二茂铁甲醇氧化物(FcMeOH+)电催化还原能力高于AuPd合金电极,而在AuPd合金上催化还原H2O2的能力显著高于Au.     

ITO基底上ZnO薄膜的制备以及刻蚀图形的扫描电化学显微镜表征

在氧化铟锡(ITO)导电玻璃的衬底上,利用直接电沉积方法制备了ZnO纳米线或ZnO薄膜.然后利用存储有HCI刻蚀剂的琼脂糖微图案印章对其进行了化学刻蚀以形成不同的图形.利用扫描电子显微镜(SEM)、X射线衍射(XRD)和扫描电化学显微镜(SECM)分别对ITO衬底上的ZnO薄膜的结构、形貌和电化学性质进行表征.     

AuPd合金泡沫的制备及其电催化活性研究

采用氢气泡动态模板法成功地制备了多孔AuPd泡沫膜,这种三维分级多孔结构是由连通的枝晶壁构成。通过扫描电镜(SEM)、透射电镜(TEM)、X射线衍射(XRD)、X射线光电子能谱(XPS)以及电化学技术对泡沫膜进行了表征。循环伏安曲线结果表明AuPd催化剂对甲醇的电催化氧化具有高催化活性,催化活性的强弱主要是由Au:Pd之间的比率决定的。在这些AuPd催化剂里,Au_1Pd_1催化剂对甲醇的催化活性最强。     

纳米孔阵列阳极氧化铝膜的制备和表征

本文通过在0℃、0.5mol·L^-1的草酸溶液中阳极氧化高纯铝片的方法制得了阳极氧化铝(AAO)膜，并用扫描电子显微镜(SEM)和原子力显微镜(AFM)对AAO膜的形貌和结构进行了表征。结果表明，阻挡层AAO膜中大小一致的膜胞在铝/氧化铝界面上排成六方形阵列;有孔层AAO膜中含有高度有序的纳米孔阵列和膜胞阵列，并且孔的直径和膜胞的尺寸都具有较窄的分布。另外，考察了阳极氧化电压对膜胞尺寸、孔径大小、孔密度和膜胞密度的影响，表明在一定的电压范围内，膜胞和孔径都随电压的升高而增大，而孔密度和膜胞密度却随电压的升高而减小。     

扫描电化学显微镜在水凝胶微孔阵列表征中的新应用

水凝胶微孔阵列是细胞培养的新型基板软材料,其微孔形貌对细胞的行为产生直接的影响.但传统水凝胶微孔阵列形貌的表征手段缺乏在水溶液中原位和可逆表征的能力.本文以水溶液中的氧气为还原电对,应用扫描电化学显微镜(SECM)对水溶液中的聚乙二醇二甲基丙烯酸酯水凝胶微孔阵列的形貌进行了原位表征,得到了水凝胶微孔阵列表面的二维孔径和三维形貌信息,开发出采用SECM对水凝胶微孔阵列形貌进行原位、可逆、无损表征及提供三维形貌信息的新方法.     

柔性可穿戴式电化学氧气传感器的制备及应用

将金铂合金纳米颗粒(AuPtNPs)修饰单壁碳纳米管(SWCNTs)多孔电极阵列,与琼脂糖水凝胶电解质相结合,构建了柔性可穿戴式电化学氧气传感器.该传感器通过光敏印章技术,在聚偏氟乙烯(PVDF)滤膜表面构筑聚二甲基硅氧烷(PDMS)的高精度电极阵列图案,并利用减压过滤实现SWCNTs和AuPtNPs的依次沉积,从而制...     

纳米尺度扫描电化学显微镜的探针制备及在电催化氧和氢反应研究中的应用

扫描电化学显微镜是一种在检测样品表面物理形貌的同时能提供丰富的电化学信息的扫描探针技术,由于超微电极的引入,它可以高时空分辨率地探究各类样品的物理形貌和电化学性能之间的构效关系. 随着现代纳米科技的不断发展,扫描探针的尺寸也逐渐从亚微米发展到纳米级别. 与此同时,高效优选各类氧反应和氢反应电催化材料,明晰其电化学反应过程和性能是二十一世纪绿色新能源转换存储系统（如可再生燃料电池、金属空气电池等）的重要研究方向. 本文首先概括了可应用于扫描电化学显微镜的纳米级扫描探针的制备及发展,之后着重介绍了近四年纳米尺度扫描电化学显微镜在电催化氧反应和氢反应研究中的一些最新研究进展. 最后以点窥面,对未来纳米尺度扫描电化学显微镜的未来发展趋势作了展望.     

扫描电化学显微镜原位表征pH值对核电蒸汽发生器合金腐蚀行为的影响(英文)

用扫描电化学显微镜(SECM)和电化学阻抗谱(EIS)原位表征了溶液pH值对核电蒸汽发生器800合金溶液中的腐蚀行为的影响.实验结果表明:在酸性氯化钠溶液中,SECM探针渐进曲线为正反馈,表明800合金为活化阳极溶解,腐蚀电位下的EIS图呈现完整的单容抗弧特征;而在中性或者碱性溶液中,SECM探针渐进曲线为负反馈,表明800合金为自钝化,不同阳极电位下的EIS图均呈现不完整的容抗弧特征,但随着阳极极化电位的增加,EIS谱容抗弧半径减小,表明钝化膜的耐蚀性下降;SECM二维扫描图像结果显示探针电流增加,表明电极表面活性增加,即钝化膜的溶解速度增加.而在中性或者碱性溶液中的SECM二维图像中均可观察到若干活性点,这可能与晶界或者金属夹杂物等有关.     

扫描电化学显微镜原位表征pH值对核电蒸汽发生器合金腐蚀行为的影响

用扫描电化学显微镜(SECM)和电化学阻抗谱(EIS)原位表征了溶液pH值对核电蒸汽发生器800 合金溶液中的腐蚀行为的影响. 实验结果表明：在酸性氯化钠溶液中,SECM探针渐进曲线为正反馈,表明800合金为活化阳极溶解,腐蚀电位下的EIS 图呈现完整的单容抗弧特征;而在中性或者碱性溶液中,SECM探针渐进曲线为负反馈,表明800 合金为自钝化,不同阳极电位下的EIS 图均呈现不完整的容抗弧特征,但随着阳极极化电位的增加,EIS 谱容抗弧半径减小,表明钝化膜的耐蚀性下降;SECM二维扫描图像结果显示探针电流增加,表明电极表面活性增加,即钝化膜的溶解速度增加. 而在中性或者碱性溶液中的SECM二维图像中均可观察到若干活性点,这可能与晶界或者金属夹杂物等有关.     

金属纳米电极的制备、表征及其在电化学测量中的应用

本文简要介绍了各种金属纳米电极的制备及表征方法。结合我们自己的工作,重点介绍了纳米电极在电化学反应动力学参数测量及扫描电化学显微镜(SECM)中的应用,并对其发展前景进行了展望。引用文献78篇。     

SECM for Studying the Immobilization and Repartition of a Redox Anti-tetracycline Aptamer on Screen-printed Carbon Electrodes

Scanning electrochemical microscopy (SECM) is discussed as a versatile tool to provide a unique approach of localized electrochemical information in the context of biosensing research. The step-by-step immobilization of DNA aptamer with intrinsic redox activity on screen-printed carbon electrode (SPCE) was successfully monitored using SECM imaging tool. Control experiments were performed with a non-electroactive aptamer. After immobilization of these aptamers, SECM images showed the repartition of the electroactive anti-tetracycline aptamer when comparing with images produced for control and for all modification steps of SPCE. The possibility of tetracycline detection was also proved by causing a decrease in recorded current.     

SECM visualization of the spatial variability of enzyme-polymer spots. 3. Enzymatic feedback mode

The responses of a PQQ-GDH entrapped in a polymer structure to mixtures of glucose and maltose were evaluated. Each compound was considered in the concentration range of 0–0.2 mM. Imaging was performed at constant height in the enzymatic feedback mode of scanning electrochemical microscopy (SECM). The enzyme-polymer spot was discretized into 15 × 15 μm² substructures which were treated as independent individual microsensors. The response surfaces of the individual microsensors were approximated with a linear regression model. The coefficients in the derived equations represent contributions from topography, glucose concentration, maltose concentration, and the competition of glucose and maltose for the same active site of PQQ-GDH to the measured signal. The ratio of glucose and maltose contributions to the current at the SECM tip was constant for all microsensors and it was predominantly determined by the ratio of the turnover rates of both analytes in the PQQ-GDH catalyzed reaction. Using the difference between these coefficients, it was possible to select the microsensors within the overall enzyme-polymer spot that provided the best data for quantifying glucose and maltose by the artificial neural network used. The quantification of glucose and maltose was successful, except when the contributions from the components of the mixture were n _g =k n units of glucose and simultaneously n _m = 1.86(1−k)n units of maltose, for each constant n > 0 and k∈<0,1>.     

A combined redox-competition and negative-feedback SECM study of self-healing anticorrosive coatings

In this paper, the long-term anticorrosive efficiency of a damaged self-healing coating is studied for the first time using scanning electrochemical microscopy (SECM). In the study an epoxy-coating with embedded-capsules containing a silyl-ester is employed. The properties of the silyl-ester as a healing-agent for the protection of AA2024-T3 were evaluated by complementary SECM experiments operating in negative-feedback and redox-competition modes. The experimental approach here presented allowed for monitoring the early-stages of corrosion activity and subsequent healing mechanisms offered by the release of silyl-ester into a relatively large coating defect. This result was observed by detecting the transition of the oxygen reduction response from a redox-competition mode to a negative-feedback behavior. These measurements demonstrated that the silyl-ester is released efficiently after capsules break upon coating damage, covering relatively large areas and gradually healing the damaged-site hindering the corrosion processes and providing an effective protection for at least one month of immersion in chloride solution.     

Recent advances in scanning electrochemical microscopic analysis and visualization on lithium-ion battery electrodes

Scanning electrochemical microscopy is a family of techniques that probes the local electrochemical surface environments with micrometer- and nanometer-scale space resolution and sub-picoampere chemical sensitivity. A recent growing trend uses these probes to investigate surface systems related to lithium-ion batteries, yielding a prodigious amount of new information. In this review, we give an overview of the recent progress on the scanning electrochemical microscopy and related techniques’ breakthroughs on lithium-ion battery electrodes research.     

Study on Electrocatalytic Activity of Platinum for Hydrogen Oxidation in Acidic Solution by Scanning Electrochemical Microscopy

The electrocatalytic activity of platinum for hydrogen oxidation in 0.01 M H₂SO₄ + 0.1 MNa₂SO₄ solution has been investigated by scanning electrochemical microscopy (SECM) technique. The cyclic voltammogram (CV), approach curve, area scan imaging and chronoamperometric methods have been used. The results indicate that the imaging capability of the SECM feedback mode can be used more efficiently to visually identify materials' electrocatalytic activity, compared with the approach curve method for identification of the conductive or insulating nature of a surface. The SECM imaging method has demonstrated the effects of Pt substrate potential on the electrocatalytic oxidation of hydrogen under a constant tip potential. It is found that the more positive the Pt substrate potential, the lower the electrocatalytic activity of the Pt. Furthermore, the chronoamperometric results support the variation of the electrocatalytic activity with the Pt substrate potential as well.     

High Sensitive Microsensor Based on Organic‐Inorganic Composite for Two‐Dimensional Mapping of H2O2 by SECM

The present work describes the development of a selective, sensitive and stable sensing microsensor for scanning electrochemical microscopy (SECM) to measure H₂O₂ during electrochemical reduction of oxygen. The microsensor is based on graphene and Poly(3,4‐ethylenedioxythiophene) composite as support to iron (III) hexacyanoferrate (II) (PEDOT/graphene/Fe^III₄[Fe^II(CN)₆]₃ microsensor). The electrochemical properties of the PEDOT/graphene/Fe^III₄[Fe^II(CN)₆]₃ microsensor were investigated by cyclic voltammetry (CV) and scanning electrochemical microscopy (SECM). The PEDOT/graphene/Fe^III₄[Fe^II(CN)₆]₃ microsensor showed an excellent electrocatalytic activity toward hydrogen peroxide (H₂O₂) reduction with a diminution of the overpotential of about 500 mV in comparison to the process at a bare gold microelectrode. The microsensor presented excellent performance for two dimensional mapping of H₂O₂ by SECM in 0.1 mol L^?1 phosphate buffer solution (pH 7.0). Under optimized conditions, a linear response range from 1 up to 1000 µmol L^?1 was obtained with a sensitivity of 0.08 nA L µmol^?1 and limit of detection of 0.5 µmol L^?1.     

SECM and SKPFM Studies of the Local Corrosion Mechanism of Al Alloys – A Pathway to an Integrated SKP‐SECM System

Scanning Kelvin Probe Force Microscopy and Scanning Electrochemical Microscopy were applied for the investigation of localized corrosion on heterogeneous aiming on the investigation of the possible correlation between the local surface potential differences, measured by the Kelvin probe technique in ambient conditions, and corrosion during immersion in a corrosive electrolyte. A model sample mimicking the interaction of Al and Cu in Al alloys was chosen to demonstrate the complementary nature of the information received from SKPFM and SECM. The necessary prerequisites for a future integration of SKP and SECM into a single set‐up are discussed.     

SECM Imaging of Interfacial Processes in Defective Organic Coatings Applied on Metallic Substrates Using Oxygen as Redox Mediator

Operation of the SECM in feedback mode over a coated metal allows changes in the state of the surface to be monitored using dissolved oxygen in the test environment as redox mediator. The system investigated consisted in mild steel samples coated with a polyurethane film in which a defect was deliberately introduced into it. Accurate approach curves under negative‐feedback condition were obtained using a platinum microelectrode over regions of the intact coating. Imaging experiments were also carried out over the artificial defect on the coating. Under these conditions, corrosion of the exposed metal substrate at the defects could be monitored.