Synthesis of (S,S)-isodityrosine by Dötz benzannulation

[reaction: see text] A synthesis of (S,S)-isodityrosine 1, a naturally occurring, key structural subunit of numerous biologically active macromolecules, is described. A formal [3 + 2 + 1] cycloaddition (D?tz benzannulation) approach was utilized to simultaneously construct an aromatic ring and the diaryl ether linkage in one step. This key step was extended to the synthesis of (S,S)-isodityrosine in two separate convergent synthetic routes. This method demonstrates a novel and mild method for the synthesis of diaryl ethers.     

Synthesis and reactivity of silyl vinylketenes: a formal interrupted Dötz benzannulation with unexpected silyl migration

[reaction: see text]. An efficient method for the generation of silyl vinylketenes from the thermal reaction of Fischer carbene complexes with silyl-substituted phenylacetylenes is described. Although the silyl vinylketene products are highly stable, conditions have been identified to induce a benzannulation/silyl migration process, providing aromatic silyl ethers.     

Application of the Dötz reaction to construction of a major portion of the ansa macrocycle (-)-kendomycin

[Reaction: see text] A D?tz reaction employing a terminal alkyne and a Fischer-type alkenylchromium carbenoid led to a pentasubstituted benzene from which a major portion of the Streptomyces metabolite (-)-kendomycin was synthesized.     

Simultaneous formation of ferrite nanocrystals and deposition of thin films via a microwave-assisted nonaqueous sol–gel process

Combination of the surfactant-free nonaqueous sol–gel approach with the microwave technique makes it possible to synthesize Fe₃O₄, CoFe₂O₄, MnFe₂O₄, and NiFe₂O₄ nanoparticles of about 5–6 nm and with high crystallinity and good morphological uniformity. The synthesis involves the reaction of metal acetates or acetylacetonates as precursors with benzyl alcohol at 170 °C under microwave irradiation of 12 min. Immersion of glass substrates in the reaction solution results in the deposition of homogeneous metal ferrite films whose thickness can be adjusted through the precursor concentration. If preformed nickel nanoparticles are used as a type of curved substrate, the ferrite nanoparticles coat the seeds and form core–shell structures. These results extend the microwave-assisted nonaqueous sol–gel approach beyond the simple synthesis of nanoparticles to the preparation of thin films on flat or curved substrates.     

The miniemulsification process — different form of spontaneous emulsification

The miniemulsification process involves the use of low concentrations of mixed emulsifier combinations of an ionic surfactant (e.g. sodium lauryl sulfate) and a cosurfactant (e.g. long-chain fatty alcohol — cetyl alcohol). The product is an oil-in-water miniemulsion with an average droplet diameter of 100–400 nm, and excellent shelf stability. The dominant presence of liquid crystals in the aqueous mixed emulsifier system, under conditions of the miniemulsification process, was confirmed by consideration of phase diagrams, conductivity and birefringence studies. Unexpectedly, interfacial tension studies showed relatively high values of 5–15 dyn cm⁻¹. In spite of these high interfacial tensions, spontaneous emulsification was found at the oil-water interface, contrary to what is known in the field. Adsorption and electrophoretic mobility studies suggested that the miniemulsification process takes place by unidirectional swelling of the lamellar bilayers in the aqueous mixed emulsifier liquid crystal system as a result of absorption of oil, followed by subdivision of these entities. The stability of miniemulsions formed by this process is influenced by a steric component in the mixed emulsifier complex adsorbed at the oil-water interface.     

The role sol–gel process for nuclear fuels-an overview

The paper reviews the sol–gel methods used for the preparation of nuclear fuel materials in the form of microspheres. It also discusses how these microspheres can be fabricated into nuclear fuels for reactors such as High Temperature Gas Cooled Reactors and Fast Reactors. The performance of these microsphere-based fuels is reviewed. More recent applications, such as the transmutation of minor actinides, (Np, Am and Cm) and hydrogen production, are also briefly covered.     

The Mössbauer effect in hexafluorostannates

Journal of Structural Chemistry -     

Synthesis of monodispersed silica nanoparticles with high concentration by the Stöber process

Silica nanoparticles with high concentration were prepared by the sol–gel process based on the Stöber method using tetraethoxysilane as a starting material. It was found that silica sol with about 4 wt% in concentration and with a diameter of about 10 nm was obtained by controlling the reaction conditions in the Stöber process. By removing the solvent under a reduced pressure, the particle concentration was increased up to 15 wt% without aggregation.     

Preparation of spherical silica particles by Stöber process with high concentration of tetra-ethyl-orthosilicate

In this paper, Stöber process with high concentration of tetra-ethyl-orthosilicate (TEOS) up to 1.24 M is used to prepare monodisperse and uniform-size silica particles. The reactions are carried out at [TEOS] = 0.22–1.24 M, low concentrations of ammonia ([NH₃] = 0.81[TEOS]), and [H₂O] = 6.25[TEOS] in isopropanol. The solids content in the resulting suspension achieves a maximum value of 7.45% at 1.24 M TEOS. Various-sized particles in the range of 30–1000 nm are synthesized. The influences of TEOS, NH₃, and H₂O on the size and size distribution of the particles are discussed. A modified monomer addition model combined with aggregation model is proposed to analyze the formation mechanism of silica particles.     

Size regulation and prediction of the SiO2 nanoparticles prepared via Stöber process

In this study, monodispersed SiO₂ nanoparticles with controllable size ranging from 20 to 100 nm have been successfully prepared by using a Stöber sol-gel process. The particle size, distribution, and morphology were examined by dynamic light scattering (DLS) and transmission electron microscopy (TEM). In order to accurately regulate the particle size, the effects of various reaction parameters on the particle size and morphology of SiO₂ nanoparticles were systematically investigated. It was found that, to some extent, the SiO₂ particle size increased linearly with the increase of ammonia or water content, as well as the decrease of reaction temperature, while nearly kept constant with the increase of tetraethyl orthosilicate (TEOS). Based upon the results, an empirical formula has been developed to model/predict the particle size of the SiO₂ nanoparticles over a wide range of various reaction conditions.     

Optimization of a hybrid chromatography-crystallization process for the separation of Tröger's base enantiomers

This paper presents an analysis of a hybrid process consisting of simulated moving bed (SMB) chromatography and crystallization and studies its performance for the separation of the Tr?ger's base enantiomers. The SMB is simulated using a detailed model including column efficiency, thus, implying a proper evaluation of the effect of column size on column efficiency and separation performance. The crystallization operations are accounted for through material balances, assuming equilibrium between enantiopure crystals and mother liquor. A genetic algorithm is used to optimize the combined process, using proper definitions of objective functions. Multi-objective optimization of this hybrid process for productivity and evaporation cost in terms of operating parameters, column length, and SMB feed concentration shows an optimum SMB purity value as a trade off between increased SMB performance and recycle of the mother liquor.     

Modification of the Stöber process by a polyazamacrocycle leading to unusual core-shell silica nanoparticles

In the view of designing functional nanoparticles, the encapsulation of 1,4,7,10-tetraazacyclododecane (cyclen) within silica nanoparticles using the St?ber process was studied. In the presence of cyclen and tetraethoxysilane (TEOS), silica particles exhibiting an unusual core-shell structure were obtained. On then basis of TEM, DLS, and NMR data, we suggest that the particle core is constituted of hybrid primary nanoparticles resulting from cyclen-silica interactions, whereas the shell formation results from further condensation of unreacted silica precursors. Control experiments performed with the zinc-cyclen complex and ammonia addition suggest that cyclen-TEOS interactions arise from the activation of the silicon alkoxide hydrolysis with the polyazamacrocycle amine groups. These data are discussed in the context of silica biomineralization mechanisms, where polyamine/silica interactions have been shown to play a major role. Moreover, the possibility to control the size and the structure of these nanoparticles makes them promising materials for pharmaceutical applications.     

Metal Free Dötz-Type Aminobenzannulation Reaction via 1,1-Dipoles Cross-Coupling

Aryl amines are of constant interest in organic synthesis owing to their ubiquity in natural products, pharmaceuticals, and organic materials. However, C−H amination or pre-functionalization frequently results in uncontrollable site selectivity, over activation and the generation of inseparable mixtures of regio-isomers. Here we present a novel metal free Dötz-type aminobenzannulation reaction that circumvents the selectivity issues inherent in aromatic chemistry, as well as the use of stoichiometric unstable organolithium reagents and toxic chromium complexes. The concept of utilizing readily available isocyanides and Morita–Baylis–Hillman (MBH) carbonates to achieve 1,1-dipoles cross-coupling to construct ketenimine is the key to success, which has been experimentally and computationally verified. The tandem 6π-electrocyclization/aromatization process offers a versatile method for synthesizing functionalized anilines, fused aryl amines and fused heteroaryl amines.     

β-Cyclodextrin derived full-spectrum fluorescent carbon dots: The formation process investigation and biological applications

Carbon dots (CDs), a new building unit, have been revolutionizing the fields of biomedicine, bioimaging, and optoelectronics with their excellent physical, chemical, and biological properties. However, the difficulty of preparing excitation-dependent full-spectrum fluorescent CDs has seriously hindered their further research in fluorescence emission mechanisms and biomedicine. Here, we report full-spectrum fluorescent CDs that exhibit controlled emission changes from purple (380 nm) to red (613 nm) at room temperature by changing the excitation wavelength, and the excitation dependence was closely related to the regulation of sp² and sp³ hybrid carbon structures by β-cyclodextrin-related groups. In addition, by regulating the content of β-cyclodextrin, the optimal quantum yields of full-spectrum fluorescent CDs were 8.97%, 8.35%, 7.90%, 9.69% and 17.4% at the excitation wavelengths of 340, 350, 390, 410 and 540 nm, respectively. Due to their excellent biocompatibility and color tunability, full-spectrum fluorescent CDs emitted bright and steady purple, blue, green, yellow, and red fluorescence in MCF-7 cells. Moreover, we optimized the imaging conditions of CDs and mitochondrial-specific dyes; and realized the mitochondrial-targeted co-localization imaging of purple, blue and green fluorescence. After that, we also explored the effect of full-spectrum fluorescent CDs in vivo fluorescence imaging through the intratumorally, subcutaneously, and caudal vein, and found that full-spectrum fluorescent CDs had good fluorescence imaging ability in vivo.     

The Structure of Ammonium,D,L—Tartrate

1 INTRODUCTION The enantiomers separated by a co- crystallization method using an appropriate chiral as separating reagent has attracted many attentions in the past years[1]. Recently we are interested in enantiomeric discrimination by chiral amino acid. When racemic D,L-tartaric acid was tried to be separated by the L-glutamine in a hot aqueous solution, the well shaped crystals were obtained. The determination of melting point (220℃) and density (1.66 g穋m－3) showed it is…