Preparation and comparison of three zwitterionic stationary phases for hydrophilic interaction liquid chromatography

Surface‐bonded zwitterionic stationary phases have shown highlighted performances in separation of polar and hydrophilic compounds under hydrophilic interaction chromatography mode. So, it would be helpful to evaluate the characteristics of zwitterionic stationary phases with different arranged charged groups. The present work involved the preparation and comparison of three zwitterionic stationary phases. An imidazolium ionic liquid was designed and synthesized, and the cationic and anionic moieties respectively possessed positively charged imidazolium ring and negatively charged sulfonic groups. Then, the prepared ionic liquid, phosphorylcholine and an imidazolium‐based zwitterionic selector were bonded on the surface of silica to obtain three zwitterionic stationary phases. The selectivity properties were characterized and compared through the relative retention of selected solute pairs, and different kinds of hydrophilic solutes mixtures were used to evaluate the chromatographic performances. Moreover, the zwitterionic stationary phases were further characterized by the modified linear solvation energy relationship model to probe the multiple interactions. All the results indicated that the types and arrangement of charged groups in zwitterionic stationary phases mainly affect the retention and separation of ionic or ionizable compounds, and for interaction characteristics the contribution from n and π electrons and electrostatic interactions displayed certain differences.     

Effect of coverage density and structure of chemically bonded silica stationary phases on the separation of compounds with various properties

The chemical character, geometry, and architecture of chemically formed surface layers determine interactions between stationary phase, analyte, and mobile phase, and therefore the retention mechanisms (partitioning, adsorption, ion exchange, steric exclusion) of separated analytes. These interactions also depend on the structure and chemical character of the solutes and the composition of the mobile phase. High-molecular-weight fullerenes (C60 and C70) and water-soluble selenium-containing peptides (833 and 2607 Da) were used for the evaluation of laboratory-prepared octadecyl stationary phases with high and low coverage density before and after end-capping. The aim of this work was to study differences in surface coverage density and homogeneity and conformational changes of chemically bonded moieties and the influence of these parameters on the separation of mixtures of selenopeptides and fullerenes with significantly different molecular masses. A topographical model of the chemically modified stationary surface is presented.     

HPLC retention behavior on hydride-based stationary phases

Two stationary phases attached to a silica hydride surface, cholesterol and bidentate C18, are investigated with a number of pharmaceutically related compounds in order to illustrate the various retention mechanisms that are possible for these bonded materials. The test solutes range from hydrophilic to hydrophobic based on log P (octanol/water partition coefficient) and pKa values. The mobile phases consist of acidified (formic and perchloric acid) water/methanol or water/ACN mixtures. Of particular interest are the high organic content mobile phase compositions where the retention would increase if the bonded material was operating in the aqueous normal phase (ANP) mode. Plots of retention factor (k) versus mobile phase composition are used to elucidate the retention mechanism. A number of examples are presented where solutes are retained based on RP, ANP, or dual retention mechanisms. The silica hydride-based stationary phases can also retain compounds in the organic normal phase.     

Transition metal complex stationary phases for the CGC analysis of ethers, thioethers and ketones

Summary The use of polysiloxanes with cyano or thiol groups as stationary phases for complexation gas chromatography is discussed. The polymers were obtained via polycondensation followed by polymerisation of the corresponding dichloro- or dimethoxy-silanes. Both the phases were modified by bonding transition metal chlorides with were modified by bonding transition metal chlorides with cyano (CuCl₂ or CoCl₂) and thiol groups (NiCl₂ or CoCl₂). The phases were examined in order to determine their application to the analysis of ethers, thioethers and ketones. Due to the presence of lone electron pairs on oxygen or sulphur atoms, the compounds should be capable of specific interacting with the electron-withdrawing centre of the liquid stationary phases. A number of retention parameters (retention indices, molecular retention indices and specific retention volume) were determined, which allowed characterisation of specific interactions between the bonded metal and the compound analysed. The results also enabled assessment of the influence of the structure of the compounds on their retention. The measurements were also carried out for the phases with free SH and CN groups as reference phases. The work demonstrates that the phases obtained may be useful for effective separations.     

Study of the retention and selectivity of cholesterol bonded phases with different linkage spacers

The chromatographic properties of four cholesterol bonded phases with different structures were studied. The columns used were packed with a stationary phase containing a cholesterol molecule attached to the silica surface using different types of linkage molecules. As a basic characteristic of the bonded phases the hydrophobicity and silanol activity (polarity) were investigated. The presence of the polar amino and carboxyl groups in the structure of the bonded ligand strongly influences the polarity of the bonded phase. Columns were compared according to methylene selectivity using a series of benzene homologues and according to their shape and size selectivity using polycyclic aromatic hydrocarbons (PAHs). The measurements were done using MeOH–water and ACN–water mobile phases. The presented results show that the coverage density of the bonded ligands and length of the linkage strongly influence the retention and selectivity of cholesterol bonded phases.     

Excess isotherms as a new way for characterization of the columns for reversed-phase liquid chromatography

In this work, we present the excess isotherm of acetonitrile for stationary phases with different coverage density. Data obtained with the minor disturbance method were compared with (29)Si cross-polarization/magic-angle spinning NMR spectra to find dependence between acetonitrile adsorption on C18 chemically bonded stationary phases and coverage density of stationary phase. The preferential adsorption of acetonitrile on the bonded phase and the adsorption of water on the silica surface can be well correlated with the coverage density.     

A density functional approach to retention in chromatography with chemically bonded phases

A density functional approach to the retention in a chromatography with chemically bonded phases is developed. The bonded phase is treated as brush built of grafted polymers. The chain molecules are modelled as freely jointed spheres. Segments of all components interact with the surface via the hard wall potential whereas interactions between the segments are described by Lennard-Jones (12-6) potential. The structure of the bonded phase is investigated. The distribution of different solutes in the stationary phases is determined. An influence of the following parameters on the retention is analyzed: the grafting density, the grafted chains length, the strength of molecular interactions, the solute sizes, temperature. The theoretical predictions are consisted with numerous experimental results.     

Comparative studies of gas chromatographic properties of new packings with chemically bonded complexes

Specific interactions of aliphatic linear and branched hydrocarbons as well as cyclic and aromatic hydrocarbons with new packings containing chemically bonded complexes of transition metals are studied. The possibility of using these packings to separate these compounds is also discussed. The packings under study contain complexes of Cu(II) and Cr(III) chemically bonded to the silica surface. Chlorides of these metals are bonded to the silica surface by the use of the ketoimine group originally from 2-(3-triethoxysililpropylimino)-3-(n-buthyl)-pentanon-4. In order to determine an influence of the performed modification to gas chromatographic properties of the packings, such retention parameters as retention factor, retention index, molecular retention index, and specific retention volume are measured for these compounds. Based on the obtained values, a trial is taken to determine an influence of the nature of the bonded metal from the complex on the retention of the adsorbates under study and a dependence between a structure of an adsorbate molecule and values of charge-transfer interactions with the bonded metal complexes.     

Gas chromatography silica packings with chemically bonded complexes of Cu(II) and Cr(III)

In the presented work, copper(II) and chromium(III) complexes chemically bonded to silica surface were prepared and used in gas chromatography. Chlorides of these metals were bonded to the silica surface by the use of the ketoimine group originally from 2-(3-triethoxysililpropylimino)-3-(n-butyl)-pentanone-4. Packings obtained in such way were investigated to evaluate their usefulness in the analysis of aliphatic and aromatic halogenated hydrocarbons as well as ethers, thioethers and ketones. Moreover, packings were subjected to elemental analysis and differential scanning calorimetry (DSC), thus some retention parameters were determined to characterize specific interactions between bonded metal and adsorbate molecules. Attempts were also made to separate some mixtures of the nucleophilic compounds.     

Comparison of the chromatography of octadecyl silane bonded silica and polybutadiene-coated zirconia phases based on a diverse set of cationic drugs

In this study, we compare the separation of basic drugs on several octadecyl silane bonded silica (ODS) phases and a polybutadiene-coated zirconia (PBD-ZrO2) phase. The retention characteristics were investigated in detail using a variety of cationic drugs as probe solutes. The ODS phases were selected to cover a relatively wide range in silanol activity and were studied with ammonium phosphate eluents at pH 3.0 and 6.0. Compared to any of the ODS phases, the PBD-ZrO2 phase showed very significant differences in selectivities towards these drugs. Due to the presence of both reversed-phase and ion-exchange interactions between the stationary phase and the basic analyte on ODS and PBD-ZrO2, mixed-mode retention takes place to some extent on both types of phases. However, very large differences in the relative contributions from ion-exchange and reversed-phase interactions on the two types of phases led to quite different selectivities. When phosphate is present in the eluent and adsorbs on the surface, the PBD-ZrO2 phase takes on a high negative charge over a wide pH range due to phosphate adsorption on its surface. On ODS phases, ion-exchange interactions result from the interactions between protonated basic compounds and ionized residual silanol groups. Since the pH of the eluent influences the charge state of the silanol groups, the ion-exchange interactions vary in strength depending on pH. At pH 6.0, the ion-exchange interactions are strong. However, at pH 3.0 the ion-exchange interactions on ODS are significantly smaller because the silanol groups are less dissociated at the lower pH. Thus, not only are the selectivities of the ODS and PBD-ZrO2 phases different but quite different trends in retention are observed on these two types of phases as the pH of the eluent is varied. More importantly, by using the large set of "real" basic analytes we show the extreme complexity of the chromatographic processes on the reversed stationary phases. Both the test condition and solute property influence the column performance. Therefore, use of only one or two probe solutes is not sufficient for column ranking.     

Evaluation of porous graphitic carbon as stationary phase for the analysis of fatty acid methyl esters by liquid chromatography

Summary Polyunsaturated fatty acids have been analysed as methyl esters by liquid chromatography on porous graphitic carbon and the results compared with those obtained on octadecyl bonded phases. Chromatographic behaviour on octadecyl bonded phases arises principally as a result of hydrophobic interactions with the bonded phase. Because the retention of analytes is greater on porous graphitic carbon than on octadecyl phases, organic mobile phases are required. When the number of double bonds is low (ca 1–3), the behaviour of porous graphitic carbon is similar to that of octadecyl bonded phases, but when this number increases stronger interactions with the flat surface of the graphite appear, resulting in new selectivity. These two ‘reversed-phase’ systems are considered complementary for separation of different fatty acid methyl esters. An additional advantage of porous graphitic carbon is that it enables isolation of hexadecartrienoic and hexadecadienoic acids, which are not available commercially.     

Retention process in reversed phase TLC systems with polar bonded stationary phases

The retention of a solute in RP chromatography is a very complex process which depends on many factors. Therefore, the study of the influence of a mobile phase modifier concentration on the retention in different reversed phase chromatographic systems is very important for understanding the rules governing retention and mechanisms of substance separation in a chromatographic process. Composition changes and the nature of mobile phases enable tuning of the separated analytes' retention over a wide range of retention parameters and optimization of the chromatographic process as well. Optimization of the chromatographic process can be achieved by several different methods; one of them is the so-called interpretative strategy. The key approach adopted in this strategy is the implementation of adequate retention models that couple the retention of solute with the composition of a mixed mobile phase. The use of chemically bonded stationary phases composed of partially non-bonded silica matrix and organic ligands bonded to its surface in everyday chromatography practice leads to questions of the correct definition of the retention model and the dominant retention mechanism in such chromatographic systems. The retention model for an accurate prediction of retention factor as a function of modifier concentration and the heterogeneity of the adsorbent surface should be taken into consideration. In this work the influence of mobile-phase composition on the retention of sixteen model substances such as phenols, quinolines, and anilines used as test analytes in different RP-TLC systems with CN-, NH2-, and Diol-silica polar bonded stationary phases has been studied. The aim of this study is to compare the performance of three valuable retention models assumed as the partition, adsorption/partition, and adsorption mechanism of retention. All the models were verified for different RP-TLC systems by three statistical criteria. The results of investigations presented in this work demonstrate that the best agreement between the experimental and calculated Rf values was obtained by the use of new-generation retention models, which assume heterogeneity of adsorbent surface. The results reported here show that heterogeneity of the adsorbent surface may be important in analysis of the elution process in liquid chromatography. Consideration of the goodness of fit for the experimental data to the examined retention models is in conformity with the adsorption mechanism of retention on all polar bonded stationary phases in most eluent systems for most investigated compounds.     

Selectivity of calixarene‐bonded silica phases in HPLC: Description of special characteristics with a multiple term linear equation at different methanol concentrations

Retention and selectivity characteristics of different calixarene‐, resorcinarene‐ and alkyl‐bonded stationary phases are examined by analyzing a set of test solutes covering the main interactions (hydrophobic, steric, ionic, polar) that apply in HPLC. Therefore Dolan and Snyder's multiple term linear equation has been adapted to fit the properties of calixarene‐bonded columns. The obtained parameters are used to describe retention and selectivity of the novel Caltrex^® phases and to elucidate underlying mechanisms of retention. Here, differences of stationary phase characteristics at different methanol concentrations in the mobile phases are examined. Both selectivity and retention were found to depend on the methanol content. Differences of these dependencies were found for different stationary phases and interactions. The differences between common alkyl‐bonded and novel calixarene‐bonded phases increase with increasing methanol content.     

Development of a new C14 monolithic silica column containing embedded polar groups for pressurized capillary electrochromatography

Monolithic columns have been prepared with a novel bonded silica stationary phase, tetradecylamine bonded silica (TDAS), and used in pressurized capillary electrochromatography (pCEC). The monolithic silica column matrix was prepared by a sol-gel process and then chemically modified with the spacer (3-glycidoxypropyl)trimethoxysilane and tetradecylamine. The introduced embedded polar amine groups dominated the charge on the surface of the monolithic stationary phase and generated an EOF from cathode to anode under acidic conditions. The tetradecyl hydrophobic chains in TDAS provide chromatographic interactions. The chromatographic characteristics of the prepared monolithic column were studied. Some aromatic compounds including alkylbenzenes, aromatic hydrocarbons, phenols, and anilines were successfully separated on the TDAS monolithic column in pCEC mode. As expected, the TDAS monolithic stationary phases exhibit typical reversed-phase electrochromatographic behavior toward neutral solutes due to the introduced tetradecyl groups. Hydrophobic as well as electrophoretic migration processes within the monoliths were observed in the separation of basic anilines. Symmetrical peaks can be obtained for anilines because the embedded polar amine groups on the surface can effectively shield the adsorption of positively charged analytes onto the stationary phase.     

Phenyl‐bonded stationary phases—The influence of polar functional groups on retention and selectivity in reversed‐phase liquid chromatography

The chromatographic properties of four phenyl‐bonded phases with different structures were studied. The columns used were packed with a stationary phase containing a phenyl ring attached to the silica surface using different types of linkage molecules. As a basic characteristic of the bonded phases, the hydrophobicity and silanol activity (polarity) were investigated. The presence of the polar amino and amide groups in the structure of the bonded ligand strongly influences the polarity of the bonded phase. Columns were compared according to methylene selectivity using a series of benzene homologues and according to their shape and size selectivity using polycyclic aromatic hydrocarbons. The measurements were done using methanol/water and acetonitrile/water mobile phases. The presented results show that the presence of polar functional groups in the ligand structure strongly influences the chromatographic properties of the bonded phase.     

Study of solvation processes on cholesterol bonded phases

Four cholesterol bonded phases with different structures were investigated. The columns studied were packed with stationary phase containing cholesterol attached to the silica surface using different types of linkage molecules. The presence of the polar amino and carboxyl groups in the structure of the bonded ligand strongly influence on the solvation process. The possibility of hydrogen bonding, dipole-dipole and π-π electron interactions lead to preferential solvation of bonded ligands. The coverage density of bonded ligands and length of the linkage strongly influence the adsorption of solvent from the mobile phase. The removal of residual silanols during the hydrosilation procedure significantly influences solvation of the bonded phase. Excess isotherms of the commonly used solvents in RP HPLC (methanol and acetonitrile) were obtained using the minor disturbance method. For comparison of the stationary phases prepared on different silica gels the excess adsorbed amounts were calculated per volume of the stationary phase in the column. The hydrosilated UDC Cholesterol bonded phase is preferentially solvated by methanol whereas the highest coverage Cosmosil Cholester phase exhibit high adsorption of acetonitrile. Polar groups in the Amino-cholesterol type bonded phase are solvated with both solvent but the mechanisms of these processes are different.     

Retention and selectivity tests of silica-based and metal-oxide bonded stationary phases for RP-HPLC

Chromatographic properties of silica-, zirconia- and alumina-based columns with octadecyl-, polyethylene glycol- and pentafluorophenylpropyl-bonded stationary phases were tested. Selectivities of nine columns for LC were characterized using chromatographic methods including Walters, Engelhardt, Tanaka and Galushko hydrophobicity and silanol activity tests, measurements of methylene selectivity in various aqueous-methanol and aqueous-acetonitrile mobile phases and of gradient lipophilic capacity as a measure of the effect of the sample hydrophobicity on gradient-elution separations. A semi-empirical interaction indices model, assuming a predominant role of the solvophobic interactions of test compounds with different polarities, was compared with the linear free energy relationships approach taking into account selective polar interactions. The interaction indices model was applied to both non-polar stationary phases bonded on silica, alumina and zirconia supports, and to the non-modified adsorbents in the normal-phase LC. The retention data of isomeric naphthalene disulfonic acids were used to compare the attractive and repulsive ionic interactions of the columns in purely aqueous mobile phases. The results of the hydrophobicity and polarity tests were consistent, and allowed column characterization and classification. Silanol activity was important with octadecyl silica columns, but was relatively insignificant with bonded polyethylene glycol and pentafluorophenylpropyl phases on silica gel support. Polar interactions with the alumina and zirconia support materials significantly affect the retention.     

Retention properties of novel β-CD bonded stationary phases in reversed-phase HPLC mode

With the given special structures, the CD bonded stationary phases are expected to have complementary retention properties with conventional C18 stationary phase, which will be helpful to enhance the polar selectivity in RP mode separation. In this work, two β-cyclodextrin (β-CD) bonded stationary phases for reversed-phase HPLC, including 1, 12-dodecyldiol linked β-CD stationary phase (CD1) and olio (ethylene glycol) (OEG) linked β-CD stationary phase (CD2), have been synthesized via click chemistry. The resulting materials were characterized with FT-IR and elemental analysis, which proved the successful immobilization of ligands. The similarities and differences in retention characteristics between the CD and C18 stationary phases have been elucidated by using comparative linear solvation energy relationships (LSERs). The force related to solute McGowan volume has no significant difference, while the hydrogen bonding and dipolar interactions between solutes and CD stationary phases are stronger than between solutes and C18, which is attributed to the special structures (CD and triazole groups) of CD stationary phases. Chemical origins are interpreted by comparison between CD1 and CD2. Similar dispersive interactions of CD1 and CD2 are attributed to their similar length of spacer arms. CD2 which contains OEG spacer arm has relative weaker HBD acidity but stronger HBA basicity. CD stationary phases display no serious different methylene selectivity and higher polar selectivity than in the case of C18. Higher acid selectivity and lower basic selectivity are observed on CD2 than on CD1. Distinctive retention properties and good complementary separation selectivity to C18 make the novel CD bonded stationary phases available for more application in RPLC.