Titanium(III) and vanadium(III) chloride complexes with 2-pyridylphenylacetonitrile and 1,2-dicyano-1,2-diphenyl-1,2-di(2′-pyridyl)ethane

Summary 2-Pyridylphenylacetonitrile (ppa) and 1,2-dicyano-1,2-diphenyl-1,2-di(2-pyridyl)ethane (dcppe) react with titanium(III) and vanadium(III) chlorides yielding complexes of formulae: [TiCl₃(ppa)₂], [TiCl₃(ppa)₃], [VCl₃(ppa)], [TiCl₃(dcppe)] and [(VCl₃)₂(dcppe)]. The results obtained suggest pentacoordinated structures for complexes, except for [TiCl₃(ppa)₃] where an hexacoordinated stereochemistry around the metal is proposed.     

Reactions of 2-pyridylphenylacetonitrile and 1,2-dicyano-1,2-diphenyl-1,2-di(2-pyridyl)ethane with cobalt(II), nickel(II), copper(II) and zinc(II) chlorides and copper(II) bromide

Summary 2-Pyridylphenylacetonitrile (ppa) is oxidized by copper(II) halides in 1,2-dichloroethane to 1,2-dicyano-1,2-diphenyl-1,2-di(2-pyridyl)ethane (dcppe), yielding 41 complexes of dcppe with copper(II) dihalide, [CuX₂(dcppe)₄] (green). Nickel(II) and zinc(II) chlorides react with ppa giving complexes of a general formula [MCl₂(ppa)₂].Dcppe reacts with copper(II), zinc(II) chlorides and copper(II) bromide yielding complexes of formulae [CuCl₂(dcppe)₄] (yellow), [ZnCl₂(dcppe)₂] and [CuBr₂(dcppe)]. No reaction is observed with cobalt(II) and nickel(II) chlorides.     

NS and NSO-Donor ligands and their metal complexes. Synthesis and characterisation of a new low-spin iron(III) complex with 1,2-di(o-aminophenylthio)ethane and iron(III), cobalt(III) and manganese(III) complexes of 1,2-di(o-salicylaldiminophenylthio)ethane

Summary Iron(III) complexes of a quadridentate N₂S₂ donor ligand, 1,2-di(o-aminophenylthio)ethane (DAPTE) and its Schiff Base with salicylaldehyde, a hexadentate N₂S₂O₂ donor ligand,viz. 1,2-di(o-salicylaldiminophenylthio)ethane (H₂DSALPTE) have been synthesised and characterised.The Schiff base ligand (1 mol) gave a dark green tri-iron(III) [Fe₃(DSALPTE)(HDSALPTE)Cl₃]Cl₂ complex when reacted with anhydrous iron(III) chloride (1 mol). The Mössbauer data of this complex suggest the presence of three iron sites, one of which is octahedral and the other two tetrahedral. On the other hand, Fe(ClO₄)₃ reacted smoothly with H₂DSALPTE in ethanol to give a mononuclear pseudo-octahedral complex in which the ligand functions in a dibasic hexadentate fashion. Mössbauer data suggest the presence of a low-spin-high-spin equilibrium in the solid state. The manganese(III) and cobalt(III) complexes of the Schiff base, H₂DSALPTE, are also studied for the sake of comparison with the corresponding iron(III) complex. The N₂S₂ ligand, however, formed a low-spin pseudo-octahedral iron(III) complex. The complexes have been characterised by elemental analysis, molar conductance values, cryomagnetic data and i.r., electronic and Mössbauer spectral data.     

meso-1,2-Bis­(methyl­azo)-1,2-di­phenyl­ethane

The title compound, meso-1,2-bis­(methyl­diazenyl)-1,2-di­phenyl­ethane, C₁₆H₁₈N₄, is arranged in a disordered manner around an inversion point. The N—N atom distances in the azo group of 1.192 (8) and 1.195 (8) Å, and the C—C atom distances in the ethyl­ene moiety at 1.512 (8) and 1.503 (8) Å in the two models [refined to 51.7 (6) and 48.3 (6)% occupancies] were not significantly different.     

Reactions of germanium(II), tin(II), and antimony(III) chlorides with acenaphthene-1,2-diimines

Reactions of diimines dtb-BIAN and dph-BIAN with GeCl₂ afford germanium(II) complexes with radical-anionic ligands, (dtb-BIAN)GeCl (5) and (dph-BIAN)GeCl (6a), respectively, where dtb-BIAN is 1,2-bis[(2,5-di-tert-butylphenyl)imino]acenaphthene and dph-BIAN is 1,2-bis[(2-biphenyl)imino]acenaphthene. The latter reaction gives 6a along with [(dph-BIAN)GeCl]⁺[GeCl₃]⁻ (6b). The reactions of tin(II) and antimony(III) chlorides with dtb-BIAN and dpp-BIAN produce complexes of these halides with neutral coordinated diimines, viz., (dtb-BIAN)SnCl₂ (7) and (dpp-BIAN)SbCl₃ (8) (dpp-BIAN is 1,2-bis[(2,6-di-isopropylphenyl)imino]acenaphthene). Paramagnetic complexes 5 and 6a were studied by ESR spectroscopy. Diamagnetic compounds 7 and 8 were characterized by ¹H NMR spectroscopy. The structures of complexes 5, 6a,b, 7, 8, and (dpp-BIAN)Ge (9) were established by X-ray diffraction analysis. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 71–80, January, 2006.     

Spin crossover in iron(II) complexes of 3,5-di(2-pyridyl)-1,2,4-triazoles and 3,5-di(2-pyridyl)-1,2,4-triazolates

The iron coordination chemistry of 3,5-di(2-pyridyl)-1,2,4-triazoles and 3,5-di(2-pyridyl)-1,2,4-triazolates is reviewed. This includes both mononuclear and dinuclear complexes, and both iron(II) and iron(III) oxidation states. The main focus is on the synthesis, structure and magnetic properties of these complexes.     

Mononuclear and homobinuclear vanadium(IV), chromium(III), molybdenum(III), and uranium(VI) chelates with ortho-cresolphthalein complexone

Mononuclear and homobinuclear o-cresolphthalein complexone complexes with VO²⁺, Cr³⁺, MoO⁺, and UO₂ ²⁺ have been prepared and their structures investigated. The empirical formulas, the mode of bonding, and the geometry of the complexes were obtained from elemental and thermal analyses, IR, electronic and ESR spectra, magnetic moment determinations, DC and CV polarographic studies.     

Reactions of (1R,2S)-1,2-di(2-furyl)-1,2-di(3-guaiazulenyl)ethane and (1R,2S)-1,2-di(3-guaiazulenyl)-1,2-di(2-thienyl)ethane with tetracyanoethylene (TCNE) in benzene: comparative studies on the products and their spectroscopic properties

Reactions of the title meso forms, (1R,2S)-1,2-di(2-furyl)-1,2-di(3-guaiazulenyl)ethane (1) and (1R,2S)-1,2-di(3-guaiazulenyl)-1,2-di(2-thienyl)ethane (2), with a two molar amount of TCNE in benzene at 25 °C for 5 h (for 1) and 48 h (for 2) under oxygen give new compounds, 2,2,3,3-tetracyano-4-(2-furyl)-8-isopropyl-6-methyl-1,4-dihydrocyclohepta[c,d]azulene (3) and 2,2,3,3-tetracyano-8-isopropyl-6-methyl-4-(2-thienyl)-1,4-dihydrocyclohepta[c,d]azulene (4), respectively, in 74 and 21% isolated yields. Comparative studies on the above reactions as well as the spectroscopic properties of the unique products 3 and 4, possessing interesting molecular structures, are reported and, further, a plausible reaction pathway for the formation of these products is described.     

Synthesis and spectral properties of new complexes between glycine and titanium(III), vanadium(III), chromium(III), iron(III), cobalt(II), nickel(II) and copper(II)

Summary Complexes of formula [MCl₃(glyH)₃] (M=Ti, V and Fe) [CrCl₃(glyH)₂H₂O], [MCl₂(glyH)₂(H₂O)₂] (M=Co and Cu) and [NiCl₂(glyH)₃H₂O] have been prepared and characterized by potentiometric curves, chemical analysis, magnetic properties, i.r. and electronic spectral data.     

Complexes of titanium(IV), vanadium(IV) and tin(IV) with schiff bases derived from 2-(2-aminophenyl)benzimidazole

Summary New titanium(IV), vanadium(IV) and tin(IV) complexes with Schiff bases derived from 2-(2-aminophenyl)benzimidazole with benzaldehyde (L₁) and salicylaldehyde (L₂) have been prepared and have the general formulae MX₄ · 2L (M = Ti, V or Sn; L = L₁ or L₂; X = Cl or Br).All the complexes have been characterized by elemental analyses, magnetic measurements, e.p.r., electronic and i.r. spectral studies. The results show that the Schiff bases act as monodentate ligands. Tentative structures for the complexes are suggested.     

The spectrophotometry and solvent-extraction behaviour of iron(III), vanadium(IV and V) and titanium(IV) chelates of 1-(o-carboxyphenyl)-3-hydroxy-3-methyltriazene

l-(o-Carboxyphenyl)-3-hydroxy-3-methyltriazene is proposed as an excellent reagent for the spectrophotometric determination of iron(III) and titanium(IV), and also for the separation of titanium from a large quantity of iron as well as other cations and anions. Iron(III) forms an anionic violet 1:2 complex at pH 4.0–9.4, and a cationic green 1:1 complex at pH 1.5–2.0, with absorption maxima at 570 nm and 660 nm, respectively. The violet complex is quantitatively extracted in chloroform containing n-octylamine at pH 3.0–9.0. The green and the violet iron(III) complexes obey Beer's law, the respective optimal ranges being 8.9–35.8 and 3.9–11.2 p.p.m. The yellow titanium chelate extracted into chloroform (absorption maximum at 410 nm) between pH 1.0 and 3.5, can be re-extracted into concentrated sulphuric acid a violet colour being produced with absorption maximum at 530 nm. Beer's law is obeyed in the ranges 0.8–5.7 p.p.m. for the titanium complex in chloroform and 3.4–19.2 p.p.m. when extracted in concentrated sulphuric acid. Interferences from diverse ions are not severe. Procedures for the separation and determination of titanium in the presence of a large quantity of iron are given. The isolation of the iron(III) and vanadium(IV and V) complexes, and their properties, are described.     

Porosity of some iron(III), chromium(III), and zirconium(IV) hydroxide oxide xerogels

Porosity and density in water are studied for xerogels prepared by drying iron(III), chromium(III), and zirconium(IV) hydroxide oxide (HO) hydrogels. The hydrogels are either freshly precipitated at pH 7–11 or aged in sodium chloride or sodium sulfate solutions. The space distribution in the xerogels between the volume occupied by the constituent ions and the interstitial volume (spaces between metal-oxygen chains, mesopores, micropores, and macropores) is determined. The meso-and micropore volumes of the chromium(III) HO xerogels are two to four times the volumes of iron(III) and zirconium(IV) HO xerogels. We suggest that the microstructure of the chromium(III) HO hydrogels is almost fully inherited by their xerogels.     

Tin(IV), titanium(IV) and vanadium(IV) chloride complexes with 2-aminobenzimidazole and 2(2′-aminophenyl) benzimidazole

Summary 2-Aminobenzimidazole (abi) and 2(2-aminophenyl)benzimidazole (apbi) react with tin, titanium and vanadium tetrachlorides to yield complexes of formulae: [MCl₄(abi)](M=Sn or Ti), [TiCl₄(abi)₂], [VCl₃(abi-H)] ((abi-H) being the deprotonated ligand) and [MCl₄(apbi)] (M=Sn, Ti or V).Abi is monodentate, with the metal in a pseudooctahedral environment, so that a dimeric structure is proposed for [SnCl₄(abi)] and [TiCl₄(abi-], monomeric for [TiCl₄(abi)₂] and polymeric for [VCl₃(abi-H)]. Apbi acts as a bidentate ligand in all complexes showing a hexacoordinated environment for the metal.     

Synthesis and spectroscopic studies of homo- and heteroleptic N-arylsalicylaldiminates of titanium(IV), zirconium(IV) and chromium(III)

Homo- and heteroleptic N-arylsalicylaldiminate derivatives of Ti^IV and Zr^IV of the type, MX_4–x (OC₆H₄CH=NAr) _x (X = OPrⁱ, x = 2,3; X = Cl, x = 1,2,3,4; Ar = C₆H₃Me₂-2,6, C₆H₃Et₂-2,6) have been prepared by reactions in the desired molar ratios of: (i) Ti(OPrⁱ)₄/Zr(OPrⁱ)₄·PrⁱOH with N-arylsalicylaldimines in benzene, and (ii) MCl₄ (M = Ti, Zr) with Me₃SiOC₆H₄CH=NAr or HOC₆H₄CH=NAr in the presence of Et₃N as a base or the potassium salt of N-arylsalicylaldimines in benzene. The three homoleptic derivatives of Cr^III, Cr(OC₆H₄CH=NAr)₃ (Ar = C₆H₂Me₃-2,4,6, C₆H₃Et₂-2,6, C₆H₃Prⁱ ₂-2,6) have also been prepared by salt-elimination. All of these new derivatives have been characterized by elemental analyses, spectroscopic [i.r., ¹H and ¹³C-n.m.r. (Ti and Zr complexes), and electronic (for Cr complexes)] studies, as well as molecular weight measurements.     

Sorption of phosphate ions on iron(III), zirconium(IV), and chromium(III) oxyhydroxides from aqueous electrolyte solutions

The adsorption of phosphate ions from aqueous solutions with an ionic strength of 0.5 on iron(III), zirconium(IV), and chromium(III) oxyhydroxide hydrogels has been studied as influenced by chloride and sulfate ions. Despite the high concentrations of chloride and sulfate ions, they do not inhibit phosphate adsorption on the hydrogels; they only slightly change the isotherm shape. In the range of equilibrium phosphate concentrations equal to 30–50 mmol/l, all isotherms for iron and zirconium oxyhydroxide gels signify the appearance of a second adsorption layer (two-step isotherms). Both steps are satisfactorily fitted by the Langmuir equation. The maximum adsorptions and adsorption constants have been calculated. For chromium oxyhydroxide gels, the intraduction of an electrolyte dramatically decreases the equilibration rate.     

Simultaneous determination of iron(II), iron(III), and titanium(IV) by flow injection analysis using kinetic spectrophotometry with Tiron

Summary Two flow injection analysis systems have been worked out for the simultaneous determination of Fe(III), Fe(II), and Ti(IV) based on the kinetic spectrophotometry with Tiron. The first system uses a silver reductor column and a single detector with two flow cells aligned in the same optical path to yield two peaks corresponding to (a) Ti(IV)-Tiron and (b) Ti(IV) plus total iron(III)-Tiron complexes. An another sample injection without the silver column yields a single peak which corresponds to Ti(IV) plus Fe(III)-Tiron complexes. With the two sample aliquot injections the system permits simultaneous determinations with throughput of 30 samples/h in the g to several tens g range of each species. The second system is a multidetection system with or without the silver reductor column using the same spectrophotometry with Tiron, in which the entrapment of the sample plug into a closed system allows its repetitive passage through a single detector. With the advantage of much simpler instrumentation, the system permits 6 samples/h to be analyzed for the three metal species with somewhat lower precisions than the first system.     

Reversed phase HPLC determination of titanium(IV) and iron(III) with sodium 1,2-dihydroxybenzene-3,5-disulfonic acid

A highly sensitive method has been developed for the determination of titanium(IV) and iron(III) by ion-pair reversed phase liquid chromatography using sodium 1,2-dihydroxybenzene-3,5-disulfonic acid (Tiron) as a precolumn chelating reagent. The metal - Tiron chelates were separated on a C₁₈ (ODS) column; the mobile phase was a 2:8 (v/v) mixture of acetonitrile and acetate buffer (0.04 mol/L, pH 6.2) containing 2.0 × 10^?3 mol/L Tiron, 0.04 mol/L tetrabutylammonium bromide, and 0.1 mol/L potassium nitrate. The detection limits for titanium(IV) and iron(III) are 0.5 and 2.0 μg/L, respectively. The method has been applied to the simultaneous determination of titanium(IV) and iron(III) in river water samples and has furnished highly precise results.     

Complexes of gallium(III), antimony(III), titanium(IV), and cobalt(II) with acenaphthenequinonimine

Reactions of (2,6-diisopropylphenylimino)acenaphthenone (dpp-mian) with gallium(III), antimony(III), titanium(IV), and cobalt(II) chlorides in toluene lead to the formation of compounds of the formulas [(dpp-mian)₂GaCl₂][GaCl₄], (dpp-mian)SbCl₃, (dpp-mian)TiCl₄, and [(dpp-mian)CoCl₂]₂[CoCl₂(EtOH)₄], respectively. The complexes were characterized by IR and NMR spectra, their structure was established by X-ray crystallography.