Determination of ketorolac in human serum by square wave adsorptive stripping voltammetry

The adsorption behavior of ketorolac on a hanging mercury drop electrode (HMDE) was explored by square-wave and cyclic voltammetry. The square wave voltammetric response of ketorolac depends on the parameters of the square wave voltammetry excitation signal as well as on the pH of the medium and the accumulation time. The drug was accumulated at HMDE and a well-defined peak was obtained at -1.41 V versus. Ag/AgCl (saturated KCl) in acetate buffer of pH 5.0. A square-wave adsorptive stripping voltammetric method for the quantitative determination of ketorolac was developed. The linear concentration range was 1x10(-10)-1x10(-8) when using 300 s accumulation at -0.8 V. The detection limit of ketorolac was 1.0x10 (-11)M . The precision was excellent with relative standard deviation of 3.85% at concentration of 5x10 (-8)M after 60 s accumulation time. Applicability to serum samples was illustrated. A detection limit of 14 ng per ml of serum was obtained.     

Electrochemical studies and square wave adsorptive stripping voltammetry of the antidepressant fluoxetine

The electrochemical reduction of the antidepressant drug fluoxetine was investigated by cyclic, linear sweep, differential pulse and square wave voltammetry using a hanging mercury drop electrode in alkaline buffer solution in water and in a water/acetonitrile mixed solvent. Cyclic voltammograms in aqueous solution showed very strong adsorption of fluoxetine on the electrode with formation of a compact film. The effect of addition of different percentages of acetonitrile on the voltammetric response was evaluated. It is shown that acetonitrile protects the electrode surface, thus preventing the adsorption of fluoxetine as a compact film, although reduction occurs at more negative potentials. Adsorption was used to accumulate the drug onto the electrode surface. The adsorbed species were measured voltammetrically by reduction at -1.3 V in an aqueous 0.05 M Ringer buffer, pH 12, 20% acetonitrile v/v. Linear calibration graphs were obtained in the range 0.52-5.2 M. The quantification of fluoxetine in pharmacological formulations existing in the market was performed using adsorptive square wave cathodic stripping voltammetry. and compared with data from UV spectrophotometry. The method is simple and not time-consuming. A comparative high performance liquid chromatography assay with UV detection was performed. Recovery data for both methods are reported.     

Study and determination of the pesticide Imidacloprid by square wave adsorptive stripping voltammetry

The kinetics of the reaction between double stranded DNA (dsDNA) and formamide is monitored at the single DNA molecule level. We find that stretching of the DNA leads to an accelerated reaction rate and to a shift in the final equilibrium concentrations. The larger the stretching force, the faster the reaction and the larger the denatured fraction of the product DNA. The single molecule kinetics is obtained from the change in the contour length of the DNA which, in turn, is measured using optical tweezers on a microbead-single DNA molecule-cover slip construct.     

Determination of methotrexate in human blood plasma by adsorptive stripping voltammetry

The use of adsorptive stripping voltammetry to measure sub-micromolar concentrations of methotrexate in plasma has been investigated. A simple clean-up procedure has been developed in which methotrexate is extracted from blood plasma with Amberlite XAD-2, which is a non-ionic resin, and eluted with methanol. Recovery for plasma analysis was 80%.     

Determination of Cr (in small quantities) by adsorptive stripping voltammetry: a comparative study of square wave versus differential pulse

The usefulness of an analytical method must be measured according to its practical application possibilities. A comparative study has been carried out here between the SW (working in an open atmosphere) and DP (working with de-aerated solutions) variants of catalytic-stripping adsorptive voltammetry applied to the determination of chromium traces in triethylenetetraminehexaacetic acid (TTHA) medium. In order to optimise the analytical signal, accumulation potential, nitrate ion concentration, pH, and TTHA concentration parameters were evaluated. Four linearity ranges were established within the interval 0.5–2000 nmol L^–1 chromium concentration in the cell, each with the recommended accumulation time. Quality parameters such as repeatability, linear regression, validity limits, precision, and sensitivity were evaluated. The SW variant is significantly advantageous when the chromium concentration in cell is less than 10 nmol L^–1 and even more if analysis time, cost, and being able to work in an open atmosphere are considered. The results are comparable to those obtained using GTAAS. Employing a CRM (tomato leaves), the accuracy is 1–4%. The proposed procedure, using tree leaves as samples, has been successfully tested for the possible monitoring of chromium contamination of the atmosphere.     

Determination of cercosporin (CER) phytotoxin isolated from infected peanut leaves by using adsorptive stripping square wave voltammetry

The adsorptive accumulation of cercosporin (CER) phytotoxin on glassy carbon (GC) electrodes from 1 M HClO₄ aqueous solutions is used to detect and quantify the phytotoxin isolated from infected leaf tissue collected from field-grown peanut in five locations in southern regions of the Provinces of Córdoba and San Luis, Argentina. The adsorptive stripping square wave voltammetry (ASSWV) is employed to perform the quantitative determination of CER in naturally infected extracts.

Thin layer chromatography (TLC) and HPLC were used to verify the presence of CER in extracts. Values of R_f = 0.23 and R_f = 0.15 were determined for CER by TLC when extracts were dissolved in ethyl acetate (EA) and acetone (Ac), respectively, while a retention time of 6.13 min (Ac) was determined by HPLC.

The recovery percentage of CER using ASSWV was determined by employing healthy peanut leaf tissue spiked with standard CER. The application of standard addition method was used to determine the recovery percentage as well as the CER contamination level in infected extracts. A recovery percentage of 93.27% was obtained with a relative standard deviation of 21.8% for a solution concentration of 1.04 × 10⁻⁶ mol dm⁻³ (n = 11). The limit of detection for a signal to noise ratio of 3:1 was about 6 ppb and the quantitation limit was about 50 ppb. The pondered relative standard deviation of 9.5% was calculated for the ASSWV method. Results found for CER contamination level in extracts through the electroanalytical method here proposed are in reasonable agreement with those values determined by using HPLC measurements.     

Determination of trace amounts of morphine in human plasma by anodic adsorptive stripping differential pulse voltammetry

New adsorptive anodic differential pulse stripping voltammetry method for the direct determination of morphine at trace levels in human plasma of addicts is proposed.The procedure involves an adsorptive accumulation of morphine on a HMDE,followed by oxidation of adsorbed morphine by voltammetry scan using differential pulse modulation.The optimum conditions for the analysis of morphine are pH 10.5,Eacc of -100 mV（vs.Ag/AgCl）,and tacc of 120 s.The peak current is proportional to the concentration of morphine,and a Linear calibration graph is obtained at 0.01-3.10μg mL^-1.A relative standard deviation of 1.06%（n=5）was obtained,and the limit of detection was 3 ng mL^-1.The capabiLity of the method for the analysis of real samples was evaluated by the determination of morphine in spiked human plasma and addicts human plasma with satisfactory results.     

Simultaneous determination of nickel(II) and cobalt(II) by square wave adsorptive stripping voltammetry on a rotating-disc bismuth-film electrode

This works reports the use of square-wave adsorptive stripping voltammetry (SWAdSV) for the simultaneous determination of Ni(II) and Co(II) on a rotating-disc bismuth-film electrode (BFE). The metal ions in the non-deoxygenated sample were complexed with dimethylglyoxime (DMG) and the complexes were accumulated by adsorption on the surface of the BFE. The stripping step was carried out by using a square-wave potential-time voltammetric excitation signal. Electrochemical cleaning of the bismuth film was employed, enabling the same bismuth film to be used for a series of measurements. The experimental variables (choice of the working electrode substrate, the presence of oxygen, the DMG concentration, the buffer concentration, the preconcentration potential, the accumulation time, the rotation speed and the SW parameters) as well as potential interferences were investigated and the figures of merit of the methods were established. Using the selected conditions, the 3σ limits of detection were 70 ng l⁻¹ for Co(II) and 100 ng l⁻¹ for Ni(II) (for 300 s of preconcentration) and the relative standard deviations were 2.3% for Co(II) and 3.9% for Ni(II) at the 2 μg l⁻¹ level (n = 8). Finally, the method was applied to the determination of nickel and cobalt in real samples with satisfactory results.     

Assay of dipyridamole in human serum using cathodic adsorptive square-wave stripping voltammetry

A rapid and sensitive square-wave voltammetric procedure was optimized for the determination of dipyridamole after its adsorption preconcentration onto a hanging mercury drop electrode. The peak current of the first of the two peaks developed for this drug in Britton-Robinson buffer at pH 8.0 has been considered for the present analytical study. An accumulation potential of -1.0 V versus Ag/AgCl/KCl(s), pulse amplitude a =100 mV, scan increment Delta E =10 mV, and frequency f =120 Hz were the optimal experimental parameters. Dipyridamole can be determined in the concentration range of 9.0 x 10(-9) to 5.0 x 10(-6) M using accumulation times of 30-300 s. A detection limit of 4.0 x 10(-11) M was achieved after a 300 s accumulation time. Applicability to serum samples was illustrated. The average recoveries for dipyridamole spiked to serum at 0.25-4.50 micro g ml(-1) were 96.0-102.0%, and the higher standard deviation was 2.9%. A detection limit of 0.06 micro g mL(-1) of serum was obtained.     

Determination of traces of hemoglobin by square wave stripping voltammetry at a silver microelectrode

An electrochemical method was developed for the determination of traces of hemoglobin (Hb) by adsorption square wave voltammetric stripping at a bare silver microelectrode. Under optimum conditions the proposed method provided a linear response over the hemoglobin concentration range 5 to 100 nmol/L. The detection limit was 3 nmol/L. The relative standard deviation was 4.5% for 6 successive determinations at 50 nmol/L Hb. Other chemicals present in the sample did not interfere.     

Determination of secnidazole in tablets and human serum by cathodic adsorptive stripping voltammetry

The electrochemical reduction of secnidazole was carried out in BR buffer solutions in the pH range 2.0–11.8 by dc polarography. The polarograms exhibited two irreversible reduction waves in acidic media and one wave in alkaline media, corresponding to the reduction of nitro group in the drug. The cathodic adsorptive voltammetric behavior was studied on glassy carbon electrode to optimize an analytical method for determination of secnidazole. The drug was determined in the range between 4.0 × 10^?6 and 1.2 × 10^?4 mol L^?1. The proposed method was successfully applied to the determination of the drug content in tablets with mean recovery and relative standard deviation of 100.91% and 1.82%, respectively. It was also applied to human serum with a good precision and accuracy.     

Determination of total inorganic iodine in seawater by cathodic stripping square wave voltammetry

A method has been designed for the reduction of iodate to iodide in seawater and subsequent determination of total dissolved iodine as iodide by cathodic stripping square wave voltammetry. The pH of the sample is lowered to about 1-2 and iodate is reduced to iodide with sodium sulfite under this acidic condition. The pH of the sample is then raised to 8-9 before the concentration of iodide is measured.     

Determination of metallothionein in Daphnia magna by modified square wave cathodic stripping voltammetry

Metallothioneins (MTs) are widely used as biomarkers in environmental studies. However, eliminating interfering factors for MT determination in vivo by electrochemical detection is difficult. In this study, NO₃⁻ and Cl⁻ were found to negatively affect MT determination in Daphnia magna by square wave cathodic stripping voltammetry (SWCSV). The relevant mechanism was analyzed, and results were used to modify the original electrochemical testing parameters and environmental conditions. This modified SWCSV achieved accurate MT concentrations in D. magna, leading to detection limits as low as picomolar levels.     

Experimental designs in the development of a new method for the sensitive determination of cadmium in seawater by adsorptive cathodic stripping voltammetry

A new differential pulse adsorptive cathodic stripping voltammetric (DPAdCSV) method for the direct determination of cadmium at subnanomolar levels in saline waters based on metal complexation with 2-acetylpyridine salicyloylhydrazone (APSH) and subsequent adsorptive deposition onto a hanging mercury drop electrode (HMDE) is presented. A study strategy based on experimental designs has been followed. Operating conditions were improved with exploratory (Plackett-Burman) and surface response (central composite) experimental designs, involving several chemical and instrumental parameters (pH, ligand concentration, pulse amplitude, time interval for voltage step, voltage step, deposition potential and deposition time). Analytical parameters as repeatability, linearity and accuracy were also investigated and a detection limit (DL) of 0.06 nM was achieved which could be lowered by extending the adsorption time. The interference of other metals and major salts present in seawater was also studied. The method was validated with reference water samples: NIST-SRM 1643d and BCR-CRM 505, showing good concordance with the certified values.     

An optimized digestion method coupled to electrochemical sensor for the determination of Cd, Cu, Pb and Hg in fish by square wave anodic stripping voltammetry

An optimized digestion method coupled to electrochemical detection to monitor lead, copper, cadmium and mercury in fish tissues was developed. Square wave anodic stripping voltammetry (SWASV) coupled to disposable screen-printed electrodes (SPEs) was employed as fast and sensitive electroanalytical method for heavy metals detection. Different approaches in digestion protocols were assessed. The study was focused on Atlantic hake fillets because of their wide diffusion in the human nutrition. Best results were obtained by digesting fish tissue with hydrogen peroxide/hydrochloric acid mixture coupled to solid phase (SP) purification of the digested material. This combined treatment allowed quantitative extraction from fish tissue (muscle) of the target analytes, with fast execution times, high sensitivity and avoiding organic residues eventually affecting electrochemical measurements. Finally, the method has been validated with reference standard materials such as dogfish muscle (DORM-2) and mussel tissues (NIST 2977).     

Study on the determination of metronidazole in human serum by adsorptive stripping voltammetry

In Britton-Robinson buffer, metronidazole is preconcentrated on a HMDE at 0.0 V (vs. AgAgCl). An adsorptive stripping peak is observed at -0.62 V. The response is linear from 1 x 10(-8) to 1 x 10(-6)M with 1.5 min accumulation. The method has been successfully applied to the determination of metronidazole in human serum and formulations.     

Disposable electrochemical flow cells for catalytic adsorptive stripping voltammetry (CAdSV) at a bismuth film electrode (BiFE)

Catalytic adsorptive stripping voltammetry (CAdSV) has been demonstrated at a bismuth film electrode (BiFE) in an injection-moulded electrochemical micro-flow cell. The polystyrene three-electrode flow cell was fabricated with electrodes moulded from a conducting grade of polystyrene containing 40% carbon fibre, one of which was precoated with Ag to enable its use as an on-chip Ag/AgCl reference electrode. CAdSV of Co(II) and Ni(II) in the presence of dimethylglyoxime (DMG) with nitrite employed as the catalyst was performed in order to assess the performance of the flow cell with an in-line plated BiFE. The injection-moulded electrodes were found to be suitable substrates for the formation of BiFEs. Key parameters such as the plating solution matrix, plating flow rate, analysis flow rate, solution composition and square-wave parameters have been characterised and optimal conditions selected for successful and rapid analysis of Co(II) and Ni(II) at the ppb level. The analytical response was linear over the range 1 to 20 ppb and deoxygenation of the sample solution was not required. The successful coupling of a microfluidic flow cell with a BiFE, thereby forming a “mercury-free” AdSV flow analysis sensor, shows promise for industrial and in-the-field applications where inexpensive, compact, and robust instrumentation capable of low-volume analysis is required.     

Selectivity and sensitivity of a reagentless electrochemical DNA sensor studied by square wave voltammetry and fluorescence

Poly(5-hydroxy-1,4-naphthoquinone-co-5-hydroxy-3-thioacetic acid-1,4-naphthoquinone)-modified electrode is used for the direct electrochemical detection of oligonucleotide hybridization. The polymer film presents well-defined electroactivity in the cathodic potential domain (between 0 and -0.8 V/SCE), due to the quinone group embedded into the polymer structure. The detection can be performed simply by square wave voltammetry. This sensor is a "signal-on" device and works with different oligonucleotide lengths, from 10 to 30 bases. Quantitative results from fluorescence are consistent with electrochemical data. It is confirmed that the signal increase in square wave voltammetry is unambiguously due to hybridization. The biosensor presents a detection limit of target of ca. 25 nM and is highly selective as it can discriminate single mismatch base.     

An adsorptive stripping voltammetry of nickel and cobalt at a solid lead electrode

For the first time, a solid lead electrode (PbE) was exploited for adsorptive stripping voltammetric determination of Ni(II) and Co(II) in the presence of nioxime as a complexing agent. The calibration graphs for Ni(II) and Co(II) were linear from 0.059 to 0.59 µg L^?1 and from 0.029 to 0.29 µg L^?1 (accumulation time 120 s), respectively. The analytical parameters such as the detection limit and separation of analytical signals obtained at the solid lead electrode were comparable with those obtained using a lead film electrode while better in comparison to those reported before for the bismuth film or solid bismuth electrodes. Co(II) could be determined in the presence of a large excess of Ni(II) and Zn(II). The proposed electrode was applied to determine Co(II) and Ni(II) traces in certified reference material and a natural water sample with satisfactory results.     

Determination of levofloxacin in human urine by adsorptive square-wave anodic stripping voltammetry on a glassy carbon electrode

The adsorption behavior of levofloxacin on a glassy carbon electrode was explored by cyclic and square-wave voltammetry. The drug was accumulated on a glassy carbon electrode and a well-defined oxidation peak was obtained in acetate buffer pH 5.0. Using square-wave anodic stripping voltammetry and accumulation at +0.4 V versus Ag/AgCl (saturated KCl) for 300 s, linear calibration graph was obtained from 6.0x10(-9) to 5.0x10(-7) M levofloxacin. The detection limit was calculated to be 5.0x10(-9) M. The R.S.D. determined from ten determinations at the 1.0x10(-7) M level was 1.7%. The method was applied for the direct determination of levofloxacin in diluted urine samples. It was validated using high-performance liquid chromatography (HPLC) as a reference method.