Solid-phase luminescence determination of tetracycline in bottled water using chemically modified silica

Possibility of using chemically modified silica (CMS) with covalently immobilized sulfonic and ethylenediaminetriacetate (ED3A) groups for the adsorption preconcentration and extraction of tetracycline (TC) from aqueous solutions is studied. The conditions of complex formation by europium(III) ions on the surface of these adsorbents are optimized. The effect of citrate and Eu³⁺ ions on the luminescence intensity of the Eu–TC complex is shown. The luminescence properties of SiO₂ED3AEu and SiO₂SO₃HEu systems with tetracyclines are studied depending on the acidity of the medium, time of phase contact, the ratio of the volume of the solution to the weighed portion of the adsorbent, and concentrations of the adsorbed substances. It is found that tetracycline is quantitatively extracted by CMS as a complex with europium(III) ions in pH range 6.5–8.0; adsorption capacity to tetracycline in the Henry region is as high as 0.07–0.09 mmol/g and partition coefficients are 10³–10⁴ mL/g. A procedure is developed for the solid-phase luminescence determination of tetracycline using SiO₂SO₃HEu and SiO₂ED3AEu systems with limits of detection of 0.8 and 2.0 nM, respectively; linearity range is 1 × 10^–9–1 × 10^–5 M. The procedure is tested in the analysis of model mixtures and samples of bottled water.     

Alkyl-malonate-substituted thiacalix[4]arenes as ligands for bottom-up design of paramagnetic Gd(III)-containing colloids with low cytotoxicity

The present work introduces thiacalix[4]arene adopting 1,3-alternate conformation with alkyl-malonate terminal substituents as ligands for Gd(III) ions. pH-dependent complex formation of Gd(III) ions via alkyl-malonate substituents in aqueous DMSO solutions results in a precipitation. The precipitated complexes were converted into hydrophilic colloids of “plum-pudding” morphology, where the Gd(III) complexes form hard small (1.5–4 nm) cores included into larger (about 180 nm) soft PSS shells. The precipitate-to-colloid transformation is facilitated by polystyrolsulfonate (PSS) for Gd(III) complexes with thiacalix[4]arene bearing propyl-malonate groups, while the presence of PSS triggers a dissolution of the precipitated complexes for thiacalix[4]arenes with pentyl-malonate substituents. To a lesser extent the similar tendency disturbs the formation of PSS-stabilized colloids on the basis of butyl-malonate substituted thiacalix[4]arene. The PSS-stabilized colloids exhibit high longitudinal and transverse relaxivities (r₁ = 23.8 and r₂ = 29.4 mM⁻¹ s⁻¹ at 0.47 T, respectively), while the recoating of the PSS-stabilized colloids with polyethyleneimine is accompanied by the dissolution of the hard cores. High relaxivity along with low cytotoxicity of PSS-stabilized colloids indicates their applicability as contrast agents in MRI.     

Selective removal of Cd(II), As(III), Pb(II) and Cr(III) ions from water resources using novel 2-anthracene ammonium-based magnetic ionic liquids

Facile synthesis of two 2-anthracene ammonium-based magnetic ionic liquids (MILs), 2-anthracene ammonium tetrachloroferrate (III) ([2A-A]FeCl₄) and 2-anthracene ammonium trichlorocobaltate (II) ([2A-A]CoCl₃) was performed by protonation of 2-aminoanthracene, followed complexation with FeCl₃/CoCl₂. The MILs were tested in the adsorptive removal of Cd²⁺, As³⁺, Pb²⁺ and Cr³⁺ from water sources. Upon treatment with 10 mg dosage of MILs in 10 mL aqueous solution of 50 ppm each of Cd²⁺, As³⁺, Pb²⁺ and Cr³⁺, adsorption capacity (mg/g) in the range of 5.73–55.5 and 23.6–56.8 for [2A-A]FeCl₄ and [2A-A]CoCl₃ respectively were recorded. Thus, the optimization, kinetic and isotherms studies were conducted using the [2A-A]CoCl₃ adsorbent. The [2A-A]CoCl₃ was more effective in pH 7–9, and equilibrium adsorption was achieved after 60 min contact time. The adsorption process proceeded via the Pseudo-second order pathway and the Langmuir isotherm model is the best fit for the adsorption process (with q_max = 227 – 357 mg/g) of all the targeted metal ions. The [2A-A]CoCl₃ adsorbent demonstrated practicality with large distribution and selectivity coefficients of the targeted ions, and up to six times regeneration.     

Removal of Lead(II), Cadmium(II), and Arsenic(III) from Aqueous Solution Using Magnetite Nanoparticles Prepared by Green Synthesis with Box–Behnken Design

Two types of magnetite (Fe₃O₄) nanoparticles were investigated as adsorbents for the simultaneous removal of Pb(II), Cd(II), and As(III) metal ions from aqueous solution. Magnetite nanoparticles were prepared by two synthesis procedures, both using water as solvent, and are referred to as conventional Fe₃O₄ nanoparticles and green Fe₃O₄ nanoparticles. The latter used Citrus limon (lemon) aqueous peel extract as the surfactant. Box–Behnken experimental design was used to investigate the effects of parameters such as initial concentration (20–150?mg?L^?1), pH (2–9), and biomass dosage (1–5?g?L^?1) on the removal of Pb(II), Cd(II), and As(III) ions. The optimum parameters for removal of the studied metal ions from aqueous solutions, including the initial ion concentration (20?mg?L^?1), pH (5.5) and adsorbent dose (5?g?L^?1), were determined. The pseudosecond-order model exhibited the best fit for the kinetic studies, while adsorption equilibrium isotherms were best described by Langmuir and Freundlich models. The optimum conditions were applied for the treatment wastewater. The removal efficiencies of Pb(II), Cd(II), and As(III) using the conventional and green synthesized Fe₃O₄ nanoparticles were 59.4?±?4.3, 18.7?±?1.9 and 17.5?±?1.6, and 98.8?±?5.6, 46.0?±?1.3, and 48.2?±?2.6%, respectively. These results demonstrate the potential of magnetite nanoparticles synthesized using C. limon peel extract as highly efficient adsorbents for the removal of Pb(II), Cd(II), and As(III) ions from aqueous solution.     

New Ionic Liquid Based on the CMPO Pattern for the Sequential Extraction of U(VI), Am(III) and Eu(III)

Extraction of U(VI), Eu(III) and Am(III) has been performed from acidic aqueous solutions (HNO₃, HClO₄) into the ionic liquid [C₄mim][Tf₂N] in which a new extracting task-specific ionic liquid, based on the CMPO unit {namely 1-[3-[2-(octylphenylphosphoryl)acetamido]propyl]-3-methyl-1H-imidazol-3-ium bis(trifluoromethane)sulfonamide, hereafter noted OctPh-CMPO-IL}, was dissolved at low concentration (0.01 mol·L^?1). EXAFS and UV–Vis spectroscopy measurements were performed to characterize the extracted species. The extraction of U(VI) is more efficient than the extraction of trivalent Am and Eu using this TSIL, for both acids and their concentration range. We obtained evidence that the metal ions are extracted as a solvate (UO₂(OctPh-CMPO-IL)₃) by a cation exchange mechanism. Nitrate or perchlorate ions do not play a direct role in the extraction by being part of the extracted complexes, but the replacement of nitric acid for perchloric acid entails a drop in the selectivity between U and Eu. However, our TSIL allows a sequential separation of U(VI) and Eu/Am(III) using the same HNO₃ concentration and same nature of the organic phase, just by changing the ligand concentration.     

Ionic liquid modified silica gel for the sorption of americium(III) and europium(III) from dilute nitric acid medium

The imidazolium bis(2-ethylhexyl) phosphate moiety was chemically attached on silica gel by chemical modification. The resulting product ([SG-Im]⁺ [DEHP]^?) was characterized by FT-IR spectroscopy, thermogravimetry and elemental analysis. The sorption behavior of Am(III) and Eu(III) on [SG-Im]⁺ [DEHP]^? was studied from dilute nitric acid medium for the separation of Am(III) and Eu(III) from aqueous waste. The effect of time, concentrations of nitric acid and europium in aqueous phase on the distribution coefficient (K _d) was studied. The study indicated the possibility of using modified silica for the separation of Eu(III) from Am(III) with high separation factors (>50 at 0.1 M HNO₃).     

Efficient removal of heavy metal ions using hydrophilic thiacalix[4]arene doped polyaniline prepared by emulsion polymerization: conductivity,isotherm and kinetic study

The adsorption capacity of conductive polyaniline doped by thiacalix[4]arene tetrasulfonate (PANI–TCAS) towards Cu(II), Cd(II), Co(II) and Cr(III) was investigated through batch adsorption techniques, and the extent of adsorption was measured as a function of pH, initial metal ion concentration and contact time. It was found that the metal ion removal reached maximum at pH 8.0 and remained constant after 60 min. Experimental data was fitted to Langmuir, Freundlich, Redlich–Peterson and Temkin equation models with the maximum adsorption capacity calculated to be 833.3, 555.5, 526.3 and 500 for Cr³⁺, Cu²⁺, Co²⁺ and Cd²⁺, respectively, from the Langmuir isotherm model. The kinetic study was carried out through pseudo‐first‐order, pseudo‐second‐order, Elovich kinetic and intraparticle diffusion models in which the related correlation coefficient for each kinetic model showed that the pseudo‐second‐order rate equation was better described by the adsorption process. XRD spectra, SEM and TEM images of the adsorbent revealed a homogeneous distribution of nano‐sized particle structure with a porous surface, the morphology of which brings about high adsorption capacity for the PANI–TCAS molecular nanocomposite which in turn was observed by the AFM micrograph. The conductivity of thiacalix[4]arene tetrasulfonate doped polyaniline after metal ion adsorption was also assessed, and the four‐probe measurement technique revealed conductivity increment as high as 102.4 S cm^?1 with a 100 order of magnitude enhancement. Copyright © 2015 John Wiley & Sons, Ltd.     

Liquid–liquid extraction of neodymium (III) and europium (III) using synergic mixture of furosemide and tribenzylamine in benzyl alcohol

The extraction behavior of Nd(III) and Eu(III) with 0.05 mol dm⁻³ furosemide in benzyl alcohol as single acidic extractant and then with equimolar (0.05 mol dm⁻³) synergic mixture of furosemide as acidic extractant and tribenzylamine as neutral donor in benzyl alcohol has been studied from aqueous solutions of pH 1 to 6. The effect of various parameters and of various cations and anions on the extraction of these metal ions was investigated. The composition of the extracted adducts was determined by slope analysis method that came out to be [(M(FS)₂)⁺ (CH₃COO)⁻] and [M(FS)₃·3TBA] where M = Nd(III) and Eu(III).

     

Lipophilic ternary complexes in liquid–liquid extraction of trivalent lanthanides

The formation of ternary complexes between lanthanide ions [Nd(III) or Eu(III)], octyl(phenyl)-N,N-diisobutyl-carbamoylmethylphosphine oxide (CMPO), and bis-(2-ethylhexyl)phosphoric acid (HDEHP) was probed by liquid–liquid extraction and spectroscopic techniques. Equilibrium modeling of data for the extraction of Nd(III) or Eu(III) from lactic acid media into n-dodecane solutions of CMPO and HDEHP indicates the predominant extracted species are of the type [Ln(AHA)₂(A)] and [Ln(CMPO)(AHA)₂(A)], where Ln?=?Nd or Eu and A represents the DEHP^? anion. FTIR (for both Eu and Nd) and visible spectrophotometry (in the case of Nd) indicate the formation of the [Ln(CMPO)(A)₃] complexes when CMPO is added to n-dodecane solutions of the LnA₃ compounds. Both techniques indicate a stronger propensity of CMPO to complex Nd(III) versus Eu(III).     

Modification of silica nanoparticles with stereisomers of <Emphasis Type="Italic">p</Emphasis>-<Emphasis Type="Italic">tert</Emphasis>-butylthiacalix[4]arene containing four 2-oxo-2-{[3-(triethoxysilyl)prop-1-yl]amino}ethoxy substituents at the lower rim

Three stereoisomers (cone, partial cone, and 1,3-alternate) of p-tert-butylthiacalix[4]arene bearing four anchor propyltriethoxysilane substituents at the lower rim were synthesized for the first time. Surface modification of silica nanoparticles (d = 12 nm) with the synthesized macrocycles gave novel hybride thiacalix [4]arene?SiO₂ particles. The obtained nanostructured adsorbents were found to efficiently extract nitroaromatic compounds from aqueous solutions. The partial cone and 1,3-alternate thiacalix[4]arene–SiO₂ hybrid particles showed affinity to nitrophenols.     

Synthesis and characterization of magnetic nano-material for removal of Eu3+ ions from aqueous solutions

Ferrite coated apatite magnetic nano-material was synthesized by a co-precipitation method and applied in removal of Eu(III) ions from aqueous solutions. The sample was firstly characterized using Fourier transform infrared spectroscopy, thermogravimetric analyses, deferential thermal analysis, X-ray powder diffraction, surface area by nitrogen adsorption and scanning electron microscopy. The results of physicochemical properties indicated that the synthesized magnetic nano-adsorbent had a crystalline structure and possessed a surface area amounted to 85.11 m² g^?1. Further, it was found to have high thermal resistance up to 600 °C and mean particle size of about 63 nm. The kinetic of Eu(III) sorption indicated that equilibrium state was attained within 12 h with using 5 mg as an appropriate nano-adsorbent weight. The sorption process was pH and ionic strength dependent. The maximum adsorbed amount of Eu(III) was attained at pH 2.5 with value reached to 157.14 mg g^?1. Desorption of Eu(III) from loaded samples was studied using various eluents and maximum recovery was obtained using FeCl₃ solution.     

Comparative study of Cr(III) adsorption by carbon nanotubes and active carbons

The adsorption of trivalent chromium ions from aqueous solutions on the surface of carbon materials, namely, multiwall carbon nanotubes (NTs) and two samples of active carbon, is studied depending on pH and adsorbate concentration in the system. Isotherms of Cr(III) adsorption by the aforementioned materials are obtained. It is shown that chromium ions are predominantly bound by surface carboxyl groups. The adsorption of chromium ions reduces the electrokinetic potential of NTs and, at chromium concentrations C _Cr(III) > 10^–5 M, leads to the reversal of the surface charge. The adsorption value decreases in the series NT > Merck carbon > Norit carbon, in contrast to an increase in the adsorbate affinity to the adsorbent in this series, as determined from the slope of the initial section of the Langmuir isotherms. Small amounts of chromium ions sorbed at low concentrations in solution (C _Cr(III) ≤ 10^–5 M) are comparable with the concentration of hydrogen ions displaced from the surface, thus making it possible to suppose the existence of an ionexchange adsorption mechanism. As the concentration of Cr(III) increases, the equivalent displacement of H⁺ is violated, thereby indicating the development of other adsorption mechanisms (complexation).     

Removal of uranium(VI) from aqueous solutions by new phosphorus-containing carbon spheres synthesized via one-step hydrothermal carbonization of glucose in the presence of phosphoric acid

The novel phosphorus-rich hydrothermal carbon spheres (HCSs–PO₄) have been synthesized via one-step hydrothermal carbonization of glucose in the presence of phosphoric acid. The textural and surface chemistry properties were characterized using Boehm titrations, scanning electron microscopy and Fourier transform infrared spectrometer. The content of oxygen-containing functional groups on the surface of HCSs increased from 0.053 to 1.009 mmol g^?1 by phosphate group modification. The adsorption ability of HCSs–PO₄ has been explored for the removal of uranium from aqueous solutions. The adsorption kinetic data were best described by the pseudo-second-order equation. Adsorption process could be well defined by the Langmuir isotherm, the adsorption capacity of HCSs increased from 80.00 to 285.70 mg g^?1 after phosphate group modification. And thermodynamic parameters indicated the adsorption process was feasible,endothermic and spontaneous. Selective adsorption studies showed that the HCSs–PO₄ could selectively remove U(VI), and the selectivity coefficients had been improved in the presence of co-existing ions, Na(I), Ni(II), Sr(II), Mn(II), Mg(II) and Zn(II). Complete removal (99.9 %) of U(VI) from 1.0 L industry wastewater containing 15.0 mg U(VI) ions was possible with 12.0 g HCSs–PO₄.     

Ionselective electrodes based on adamantylthiacalix[4]arenes for alkali cations determination

The possibility of using three derivatives of p-R-thiacalix[4]arene: tetraethyl ester of p-(1-adamantyl)thiacalix[4]arene acid (I) and asymmetric p-tert-buthylcalix[4]-p-R-thiacalix[4]arene “molecular tubes” [R = tert-Bu(II), 1-adamantyl(III)] as ionophores in PVC-membrane ISEs for the determination of Na⁺, K⁺ and Rb⁺ ions was studied. It was found that an electrode based on thiacalix[4]arene (I) exhibited high selectivity toward Na⁺ ions, and electrodes with (II) and (III) demonstrated a good potentiometric response of the Rb⁺ ion; Rb⁺ can be determined in the presence of excess amounts Na⁺ and K⁺.     

The MOF+ Technique: A Significant Synergic Effect Enables High Performance Chromate Removal

A significant synergic effect between a metal–organic framework (MOF) and Fe₂SO₄, the so‐called MOF⁺ technique, is exploited for the first time to remove toxic chromate from aqueous solutions. The results show that relative to the pristine MOF samples (no detectable chromate removal), the MOF⁺ method enables super performance, giving a 796 Cr mg g⁻¹ adsorption capacity. The value is almost eight‐fold higher than the best value of established MOF adsorbents, and the highest value of all reported porous adsorbents for such use. The adsorption mechanism, unlike the anion‐exchange process that dominates chromate removal in all other MOF adsorbents, as unveiled by X‐ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and transmission electron microscopy (TEM), is due to the surface formation of Fe_0.75Cr_0.25(OH)₃ nanospheres on the MOF samples.     

Ferric Chloride Complexes in Aqueous Solution: An EXAFS Study

A series of concentrated aqueous solutions of ferric chloride with different chloride:iron(III) ratios has been studied by means of EXAFS to determine the structure around the iron(III) ion of the dominating species in such solutions. The dominating species in dilute acidic aqueous solution of ferric chloride, at less than 1 mmol·dm^?3, are the hydrated iron(III) and chloride ions, while in concentrated aqueous solution and in solutions with an excess of chloride ions, up to 1.0 mol·dm^?3, it is the trans-[FeCl₂(H₂O)₄]⁺ complex. Possible higher chloroferrate(III) or dimeric [Fe₂Cl₆] complexes at room temperature, as proposed in the literature, were not observed in any of the studied solutions in spite of an excess of chloride ions of 1 mol·dm^?3.     

Assessment of adsorption properties of inorganic–organic hybrid cyclomatrix type polyphosphazene microspheres for the removal of Pb(II) ions from aqueous solutions

Abstract

Inorganic–organic hybrid cyclomatrix type polyphosphazene microspheres (poly[cyclotriphosphazene-co-(4,4′-diaminodiphenylmethane)]) (HDMS) and poly[cyclotetraphosphazene-co-4,4′-diaminodiphenylmethane)] (ODMS) were prepared to investigate their possible use as alternative adsorbents for the comparative study on Pb(II) ions removal from aqueous solutions. The structures of the microspheres were elucidated by Fourier Transform Infrared (FTIR) spectroscopy and Dynamic Light Scattering (DLS) measurements, and the surface morphologies were also observed by Scanning Electron Microscopy (SEM). The adsorption of Pb(II) ions onto HDMS and ODMS from aqueous solutions was examined by means of pH, temperature, contact time and concentration. Furthermore, adsorption kinetics and isotherm models were applied and the experimental data fitted well with Langmuir isotherm and pseudo-second-order kinetic models. The maximum adsorption capacities of HDMS and ODMS for Pb(II) ions were obtained as 157.8 and 308.0?mg g^?1 at 20?°C and pH 5.5, respectively.     

Some synthesized polymeric composite resins for the removal of Co(II) and Eu(III) from aqueous solutions

Summary The ion-exchange and sorption characteristics of new polymeric composite resins, prepared by gamma radiation were experimentally studied. The composite resins show high uptake for Co(II) and Eu(III) ions in aqueous solutions in a wide range of pH. The selectivity of the resins for Co(II) or Eu(III) species in presence of some competing ions and complexing agents (as Na⁺, Fe³⁺, EDTANa₂, etc.) was compared. Various factors that could affect the sorption behavior of metal ions (Co(II) and Eu(III)) on the prepared polymeric composite resins were studied such as ionic strength, contact time, volume mass ratio.     

Competitive sorption of Cu(II) and Eu(III) ions on olive-cake carbon in aqueous solutions—a potentiometric study

The competitive sorption of Cu(II) and Eu(III) ions from aqueous solutions by olive-cake carbon, has been investigated by potentiometry at pH 6, I=0.1 M NaClO₄, 25°C and under normal atmospheric conditions. Evaluation of the experimental data supports the formation of inner-sphere surface complexes and results in the calculation of the formation constant of the surface complexes ((=S–O)₂Cu), which is found to amount log β _Cu=5.3±0.3. Addition of competing Eu(III) ions in the aqueous system leads to replacement of the Cu(II) by the competitor metal ion. Evaluation of the potentiometric data obtained from competition experiments indicates an ion-exchange mechanism. The formation constant of the Eu(III) species sorbed on olive cake carbon is found to be log β _Eu=5.1±0.5. Comparison of the complex formation constants of the olive-cake carbon with the corresponding complex formation constants for of olive cake and humic acid with the two metal ions, indicates that the same type of active sites is responsible for the metal ion complexation on the surface of the different types natural organic matter (e.g. olive-cake carbon, olive-cake and humic acid).