Electrochemical reduction of cefminox at the mercury electrode and its voltammetric determination in urine

The electrochemical behaviour of cefminox in phosphate buffers solutions over pH range 2.0-9.0 using differential-pulse polarography, DC-tast polarography, cyclic voltammetry and linear sweep voltammetry (staircase) has been studied. In acidic media, a non reversible diffusion-controlled reduction involving two electrons occurs and the mechanism for the reduction was suggested. A differential-pulse polarographic method for the determination of cefminox in the concentration range 5.8×10⁻⁶-6.0×10⁻⁵ M with a detection limit of 1.76×10⁻⁶ M was proposed. Also, a method based on controlled adsorptive pre-concentration of cefminox on the hanging mercury drop electrode followed by linear sweep voltammetry, allows its determination in the concentration range 8.3×10⁻⁸-1.5×10⁻⁶ M with a detection limit of 2.47×10⁻⁸ M. These methods have been used for the direct determination of cefminox in human urine with recoveries between 98 and 103%, and precision around ±2%.     

Electrochemical reduction of ciprofloxacin at the mercury electrode and its voltammetric determination in tablet and urine

In this study a reduction square wave voltammetric method was developed and validated for the direct determination of ciprofloxacin (CIP) in pharmaceutical formulation and biological fluid using hanging mercury dropping electrode (HMDE) surface. Best results were obtained for the quantitative determination of CIP in 0.02 M Britton-Robinson buffer at pH 2.5 and at a potential of ?1300 mV vs. Ag/AgCl reference electrode. Various experimental and instrumental parameters affecting the peak current and potential of CIP electrochemical reduction were investigated and optimized. The monitored peak current was directly proportional to the concentration of CIP, where it exhibited a linear response in the range 3.0 × 10^?7–2 × 10^?6 M (r = 0.99). The accuracy of the proposed method was concluded based on the value of mean recovery of 98 ± 0.72 % with RSD of 0.181 % at a detection limit of 7 × 10^?9 M. Possible interferences by various substances usually present in pharmaceutical formulations have been also evaluated. After validating the proposed method, the applicability of this voltammetric method was demonstrated by estimating CIP in its pharmaceutical formulation and spiked human urine, where values of mean recoveries of 97 ± 1.0% and 108.0 ± 2.0% were obtained, respectively.     

Voltammetric determination of herbicide molinate in river water and rice samples using solid silver amalgam electrode fabricated with nanoparticles

The evaluation of the voltammetric behaviour and the determination of herbicide molinate were performed for the first time over the surface of solid amalgam electrode fabricated with silver nanoparticles using cyclic voltammetry and square-wave voltammetry techniques. The experimental and instrumental parameters were evaluated to reach the maximum analytical response for molinate. It was achieved when a medium composed of 0.04 mol L^?1 Britton–Robinson buffer at the pH value of 4.0 was used. Under these conditions, molinate showed one pronounced reduction peak at E_p = ?0.37 V (vs. Ag/AgCl 3 mol L^?1) that was characterised as an irreversible system. An analytical curve was constructed at the concentration range from 9.36 to 243.49 µg L^?1 and a limit of detection of 2.34 µg L^?1 was obtained. The amalgam electrode presented good stability during the measurements with relative standard deviation (RSD) values of 2.9% for the repeatability and 5.4% for the reproducibility. The voltammetric method developed here could be conveniently applied for the determination of molinate in river water and rice spiked samples at levels below those established on the legislations of European Union and Brazil with good accuracy (RSD of less than 5% for all samples). Comparison with HPLC technique was carried out and the results indicated satisfactory concordance. According to the results depicted here, the silver nanoparticles solid amalgam electrode showed itself highly sensitive and an interesting alternative for the routine analysis of molinate in water and food samples. Furthermore, it introduces an environmentally acceptable alternative to the mercury electrodes, most commonly used for determination of reducible pesticides.     

Electrochemical reduction of secnidazole and its determination in tablets

The electrochemical reduction of secnidazole has been carried out in aqueous solution in the pH range of 2.0–12.0 by DC polarography, AC polarography and cyclic voltammetry. Two well-defined reduction waves appear in acidic media, whereas at higher pHs the two waves overlap. The variation of E_1/2 or E_p and I_lim or I_p with pH was studied. The diffusion-controlled nature of the waves was established and the irreversibility of the electrode process was verified by different criteria. The mechanism of reduction was discussed. A method for the detemination of secnidazole by DC polarography at pH 8.5 which allows quantitation over the 1 × 10⁻⁵ M-4 × 10⁻⁴ M range was proposed and applied to the determination of secnidazole in tablets. The mean recovery was 99.67% and the relative standard deviation was 0.89%. Excipients did not interfere in the determination.     

Electrochemical reduction of decafluorobenzil in DMF on a platinum electrode

The mechanism of electrochemical reduction of decafluorobenzil on a platinum electrode in DMF was investigated by cyclic voltammetry. The first reduction peak corresponded to a reversible single-electron transfer leading to the formation of a relatively stable anion-radical whose ESR spectrum was registered and characterized. The second peak corresponded to the reduction of the anion-radical into an unstable dianion that quickly reacted with initial decafluorobenzil, and the arising species (or its transformation product) at the given potential underwent further reduction. The effect of fluorine on the potentials and on the mechanism of the electrochemical reduction of decafluorobenzil was considered.     

Catalytic determination of selenium with a picrate-selective electrode

A method is described for the determination of selenium, based on its catalytic effect on the picrate—sulfide reaction. The determination involves a variable-time kinetic procedure using potentiometric monitoring with a picrate-selective electrode and automatic measurement of the time required for the potential to change by a preselected amount (5.0 mV). Selenium in the range 3–30 μg was determined with an average error of about 4% and relative standard deviations of about 2%. The reaction can also be followed spectrophotometrically.     

Electrochemical behaviors of guanosine on carbon ionic liquid electrode and its determination

The electrochemical behaviors of guanosine on the ionic liquid of N-butylpyridinium hexafluorophosphate (BPPF₆) modified carbon paste electrode (CPE) was studied in this paper and further used for guanosine detection. Guanosine showed an adsorption irreversible oxidation process on the carbon ionic liquid electrode (CILE) with the oxidation peak potential located at 1.12 V (vs. SCE) in a pH 4.5 Britton-Robinson (B-R) buffer solution. Compared with that on the traditional carbon paste electrode, small shift of the oxidation peak potentials appeared but with a great increment of the oxidation peak current on the CILE, which was due to the presence of ionic liquid in the modified electrode adsorbed the guanosine on the surface and promoted the electrochemical response. The electrochemical parameters such as the electron transfer coefficient (α), the electron transfer number (n), and the electrode reaction standard rate constant (k_s) were calculated as 0.74, 1.9 and 1.26 × 10⁻⁴ s⁻¹, respectively. Under the optimal conditions the oxidation peak current showed a good linear relationship with the guanosine concentration in the range from 1.0 × 10⁻⁶ to 1.0 × 10⁻⁴ mol/L by cyclic voltammetry with the detection limit of 2.61 × 10⁻⁷ mol/L (3σ). The common coexisting substances showed no interferences to the guanosine oxidation. The CILE showed good ability to distinguish the electrochemical response of guanosine and guanine in the mixture solution. The urine samples were further detected by the proposed method with satisfactory results.     

Electrochemical determination of mesotrione and its degradation products on glassy carbon electrode

A simple, fast and sensitive analytical method was developed for the quantification of herbicide mesotrione (MES) and its degradation products: 4-(methylsulfonyl)-2-nitrobenzoic acid (MNBA) and 2-amino-4-(methylsulfonyl) benzoic acid (AMBA) using differential pulse voltammetry (DPV). Voltammetric measurements were performed using glassy carbon electrode (GCE). Potential range, pH of the electrolyte and the scan rate were optimised to achieve the lowest detection limits of analytes. The optimal conditions were obtained in a Britton–Robinson (BR) buffer at pH 4.0 for MNBA and at pH 6.0 for MES and AMBA, with the scan rate 0.08 V/s. The potential V for (1) nitro and carbonyl groups of MES, (2) nitro group of MNBA and (3) amino group of AMBA, obtained under optimised conditions, was plotted as a function of a peak current (I). The I(V) dependencies were measured for the following concentration ranges: 0.5–5.0 µM for the nitro group of MES and MNBA, 0.75–5.0 µM and 0.50–8.5 µM for the carbonyl groups of MES, and 0.25–8.5 µM for amino group of AMBA; whereas, the limit of detection was in range 0.07–0.23 µM (20–80 µg/L). The proposed method is the first one that allows the determination of both MES and its degradation products. The practical applicability of these newly developed voltammetric methods was verified by direct determination of MES and its degradation products in model samples of drinking and surface water.     

Electrochemical reduction of dihydroquercetin on mercury electrode

The methods of classical and ac polarography were used to study the electrochemical behavior of dihydroquercetin on a mercury dropping electrode. This process occurs only in protonic media. The protonated and nonprotonated forms of dihydroquercetin undergo electroreduction. The amount of electrons and protons participating in electroreduction of the studied flavonoid is determined. The nature of currents measured in the processes of electrochemical reduction of dihydroquercetin is studied.     

Electrochemical study and voltammetric determination of sodium diethyldithiocarbamate using silver nanoparticles solid amalgam electrode

We report in this work, for the first time, the voltammetric study and the development of an electroanalytical method for the determination of sodium diethyldithiocarbamate (Na-DDC) using solid amalgam electrode fabricated with silver nanoparticles. The experimental parameters were studied and the best voltammetric response was reached when using 0.02 mol L^–1 Britton–Robinson buffer (pH = 5.5). Cyclic voltammograms of the substance presented two voltammetric signals: one cathodic peak at E_p = – 0.55 V and one anodic peak at E_p = – 0.49 V. The redox process of Na-DDC showed itself as an adsorption-controlled and quasi-reversible system. A mechanism for this electrochemical reaction was proposed. The analytical studies employed square-wave adsorptive stripping voltammetry (SWAdSV) and were based on the cathodic signal given by Na-DDC. Good linearity was observed in the concentration range from 2.83 × 10^–7 mol L^–1 to 6.89 × 10^–6 mol L^–1. The obtained limit of detection was 7.26 × 10^–8 mol L^–1. The electroanalytical approach described here was successfully employed for the determination of Na-DDC in river water at levels of concentration from 1.46 × 10^–7 mol L^–1 to 1.46 × 10^–6 mol L^–1 with good repeatability and reproducibility (RSD values of 4.2% and 5.9%, respectively). The values found during these determinations presented good concordance when compared with the expected values. According to the data presented here, the solid amalgam electrode fabricated with silver nanoparticles may be seen as an effective and green tool for the electrochemical analysis of Na-DDC and also other reducible compounds that usually require mercury-based electrode surfaces.     

青蒿素在银电极上的电化学行为及其定量分析

在乙醇(1+4)+B R缓冲溶液(pH7.2)中,青蒿素在银电极上有一灵敏的还原峰,无氧化峰,峰电位为-0.64V(vs.SCE)。2 5次微分线性扫描伏安(2 5thLSV)峰电流与青蒿素的浓度在8.0×10-6～1.0×10-3mol L范围内成线性关系(r=0.9994),检出限为5.0×10-6mol L,该法已用于人工合成样品分析,优于紫外测定法。     

Electrochemical reduction of hydrogenated 2-pyrimidones on a graphite electrode

A rotating disk-ring, graphite electrode was used to show that the first step in the electrochemical oxidation of substituted 2-oxo-1,2,3,4-tetrahydropyrimidines in anhydrous acetonitrile corresponds to a two-electron process and leads to the formation of the corresponding substituted 2-oxo-1,2-dihydropyrimidines. The electroreduction wave of 2-oxo-1,2-dihydropyrimidines on the ring electrode which appears at about –1.0 V is related to the reduction of the protonated oxidized species arising in the electrolysis. The electrochemical oxidation potentials of 11 hydrogenated 2-pyrimidones and electrochemical reduction-potentials of two 2-pyrimidines were determined.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 1, pp. 117–121, January, 1985.     

Flow-injection determination of iodide with a silver electrode

A procedure is developed for the flow-injection determination of iodide using a modified silver electrode; it extends the analytical range of iodide by an order of magnitude as compared to potentiometric determination using an iodide-selective electrode with a polycrystalline membrane. The detection limit is 7 μg/L. The procedure was used to determine iodide in natural mineral waters and model solutions. The throughput was 20–25 samples/h.     

Electrochemical reduction of nicergoline and its analytical determination in dosage forms

Electrochemical reduction of nicergoline was studied at different pH and concentrations using differential pulse polarography and linear sweep voltammetry. Both techniques reveal that the reduction process occurs with strong adsorption of the product. Nicergoline is an excellent model for the previously developed theory related to the effects of strong adsorption of electroactive species in voltammetry. At concentrations below 0.1 mM, the adsorption prepeak is linearly dependent on nicergoline concentration. This peak was used to develop a new differential pulse polarographic method for the determination of the drug in pharmaceutical dosage forms. The method is simple and not time-consuming because nitrogen purging of samples and previous separation of the excipients were not needed. A comparative UV spectrophotometric assay was applied. Recovery data and composite and uniformity content studies for both methods are reported.     

Electrochemical reduction and voltammetric determination of metronidazole at a nanomaterial thin film coated glassy carbon electrode

Simple and sensitive electrochemical method for the determination of metronidazole, based on a nanostructured film coated glassy carbon electrode (GCE), is described. Multi-walled carbon nanotubes (MWNT) was dispersed into water in the presence of a hydrophobic surfactant to give very stable and homogeneous MWNT suspension, and a MWNT-film coated GCE was achieved via evaporating solvent. Metronidazole yields a well-defined reduction peak whose potential is −0.71 V at the MWNT-film coated GCE in pH 9.0 Britton-Robinson buffer. Compared with bare GCE, the MWNT-film modified GCE significantly enhances the reduction peak current of metronidazole. All the experimental parameters were optimized for the determination of metronidazole. The detection limit is 6×10⁻⁹ mol/l at 2 min accumulation. This method has been successfully used to determine metronidazole in the drugs. Furthermore, results obtained by the proposed method have been compared with spectrophotometric method.     

Electrochemical oxidation behavior of 2,4-dinitrophenol at hydroxylapatite film-modified glassy carbon electrode and its determination in water samples

Hydroxylapatite (HAP)-modified glassy carbon electrode (GCE) was fabricated and used to investigate the electrochemical oxidation behavior of 2,4-dinitrophenol (2,4-DNP) by cyclic voltammetry, differential pulse voltammetry, and chronocoulometry. The oxidation peak current of 2,4-DNP at the modified electrode was obviously increased compared with the bare GCE, indicating that HAP exhibits a remarkable enhancement effect on the electrochemical oxidation of 2,4-DNP. Based on this, a sensitive and simple electrochemical method was proposed for the determination of 2,4-DNP. The effects of HAP concentration, accumulation time, accumulation potential, pH, and scan rate were examined. Under optimal conditions, the oxidation peak current of 2,4-DNP was proportional to its concentration in the range from 2.0 × 10⁻⁶ to 6.0 × 10⁻⁴ M with a correlation coefficient of 0.9987. The detection limit was 7.5 × 10⁻⁷ M (S/N = 3). The proposed method was further applied to determine 2,4-DNP in water samples with recoveries from 96.75% to 106.50%.     

Electrochemical determination of maltol in beverages with glassy carbon electrode and its silica sol-gel modified electrode

The electrochemical behavior of maltol on a glassy carbon (GC) electrode was investigated. The results were applied to differential pulse voltammetric determination of maltol in beverages pretreated by ultrafiltration. Under the optimum experimental conditions, the linear range is 1×10⁻⁵ to 6×10⁻⁴ mol l⁻¹ maltol and the relative standard deviation for 0.4 mmol l⁻¹ maltol is 0.6% (n=9). The detection limit was 5 μmol l⁻¹. Furthermore, silica sol-gel film on GC electrode could be used as suitable selective membrane, which integrated selective membrane on the electrode and substituted for the pretreatment of ultrafiltration. Under the above conditions, maltol was determined by semi-differential linear sweep voltammetry at a silica sol-gel modified GC electrode in the concentration range of 5×10⁻⁶ to 5×10⁻⁴ mol l⁻¹. The detection limit was 2 μmol l⁻¹ and the relative standard deviation for 0.1 mmol l⁻¹ maltol was 0.7% (n=7). The proposed method is of sensitivity, simplicity, rapidness and no contamination. It had been applied to the direct determination of maltol in beverages such as grape wines, drinks and beers without any pretreatment. The results obtained with the present method were satisfactory with those obtained by spectrophotometry. It could be used as a simple and practical method for the determination of the flavor enhancer maltol in beverages.     

Electrochemical reduction of oxygen at a porous flow-through electrode

The electrochemical reduction of oxygen at a porous flow-through electrode is described with emphasis on the effects of concentration, flow speed and surface area. On a packed bed copper electrode in sulfuric acid, it was found that oxygen undergoes a two electron reduction process giving rise to H₂O₂.