Ultrasonic/Soxhlet/supercritical fluid extraction kinetics of pyrethrins from flowers and allethrin from paper strips

Three different extraction methods (ultrasonic extraction (USE), Soxhlet extraction (SOX) and supercritical fluid extraction (SFE)) were compared for the extraction of pyrethrins from chrysanthemic flowers and commercial insecticide powder. Allethrin was extracted from paper strips. All extracts and the kinetics were analyzed by supercritical fluid chromatography and flame ionization detector. Received: 18 January 1999 / Revised: 29 June 1999 / /Accepted: 30 June 1999     

Investigation of SFE/SFC grade carbon dioxide

Carbon dioxide, the most used substance for supercritical fluid extraction, was investigated for its purity. The carbon dioxide containing impurities were concentrated in a cold trapping system and analyzed by GC-FID, -ECD and -MS. It was possible to identify several of these impurities. For some SFE pumps a helium headpressure is required. The influence of different headpressures and different types of gases on impurity level was also investigated. Received: 13 January 1999 / Revised: 29 March 1999 / Accepted: 31 March 1999     

Supercritical fluid extraction of flavonoids from Scutellariae Radix

An optimal condition of supercritical fluid extraction (SFE) for flavonoids of Scutellaria baicalensis was developed. In this study, various temperatures, pressures and modifiers were studied. The conventional extraction methods were conducted in parallel for comparison. The crude extracts were qualitatively compared by TLC and GC–MS, and the contents of flavonoids were determined by HPLC. The amounts of baicalin, baicalein and wogonin in the Scutellariae Radix obtained by supercritical fluid extraction and a conventional sonic shaking method were 137.6 mg/g, 8.6 mg/g and 2.2 mg/g, 113.5 mg/g, 5.7 mg/g and 2.3 mg/g, respectively. Application of SFE for extraction of the flavonoids from Scutellariae Radix was preferable. The optimal conditions of SFE was as follows: supercritical carbon dioxide–MeOH–water (20:2.1:0.9), 50°C and 200 bar.     

Comparison of supercritical fluid and ultrasound-assisted extraction of carotenoids and chlorophyll a from Dunaliella salina

In the work described here the extraction processes of carotenoids and chlorophylls were analysed using two extraction techniques, namely ultrasound-assisted extraction and supercritical fluid extraction, and the results are compared. The solvents used for the ultrasound-assisted extraction were N,N′-dimethylformamide and methanol and for the supercritical fluid extraction, carbon dioxide. The raw material studied was Dunaliella salina, a microalgae characterized by the high levels of carotenoids present in its cellular structure. The results indicate that the supercritical fluid extraction process is comparable to the ultrasound-assisted extraction when methanol is used as solvent. In addition, the supercritical extraction process is more selective for the recovery of carotenoids than the conventional technique since it leads to higher values for the ratio carotenoids/chlorophylls. Finally, the effects of pressure and temperature on the extraction yields of the supercritical fluid extraction process were studied.     

Supercritical fluid extraction and liquid chromatography-electrospray mass analysis of vinblastine from Catharanthus roseus

Supercritical fluid extraction using carbon dioxide modified with methanol, methanol-diethylamine, or methanol-triethylamine was used to extract vinblastine from the aerial portions of Catharanthus roseus. An HPLC-electrospray ionization (ESI)/MS analysis method was also developed to quantify the alkaloids in these extracts. Of the supercritical solvents evaluated, carbon dioxide-methanol-triethylamine (80 : 18 : 2) at 80 degrees C and 34.0 MPa greatly improved the supercritical fluid extraction (SFE) yield of vinblastine by as much as 76.4% over methanol extraction, while the other solvent conditions extracted the compound at yields less than 25% that of a methanol extraction. These results were confirmed by the robust HPLC-ESI/MS analytical method developed in this study.     

Supercritical fluid extraction of oxindole alkaloids from Uncaria tormentosa

Supercritical fluid extraction of oxindole alkaloids from Uncaria Tormentosa is described. The extraction was performed with supercritical carbon dioxide alone and with supercritical carbon dioxide modified with 10% metanol, and the extracts were analyzed by GC/MS and HPLC/MS.     

Supercritical fluid extraction of ecdysterone from the roots of Achyranthes bidentata BL

Ecdysterone has been found in a great many plants and animals and has some valuable pharmaceutical properties. The present study was conducted to investigate optimal conditions for the extraction of the compound by supercritical fluid extraction from the roots of Achyranthes bidentata BL. An orthogonal array design (OAD), OA(9)(3(4)), was employed as a chemometric method for optimization of the extraction of ecdysterone from the herbal medicine. Four parameters, namely, pressure and temperature of the supercritical fluid, the dynamic extraction time, and the flow rate of dimethyl sulfoxide, were studied and optimized by a three-level OAD. Determinations of the extracts were performed by high-performance liquid chromatography. The effects of the parameters were studied using analysis of variance. The results shown that the yield of ecdysterone could be influenced by the four parameters to a similar degree. The yield for DMSO-modified supercritical CO(2) was in the range from 0.65 to 1.03 mg/g under the selected conditions. In comparison with methanol-modified supercritical CO(2 )and Soxhlet extraction, a higher yield was obtained when DMSO-modified supercritical CO(2) was used.     

Supercritical fluid extraction of polycyclic aromatic hydrocarbons (PAH) from native soil and fly ash with pure and modified carbon dioxide and dimethylether

Polycyclic aromatic hydrocarbons (PAH) and alkyl-PAH in the lower mg/kg range were extracted from soil and fly ash. Extraction yields were measured for toluene Soxhlet, supercritical carbon dioxide, toluene modified carbon dioxide, and toluene modified dimethylether (DME) extractions. Pure DME similarly to toluene Soxhlet extraction enhances extraction yields (32 mg/kg) as compared to pure carbon dioxide (21 mg/kg). In particular, higher molecular weight PAH are extracted with pure DME. 5% Toluene modified carbon dioxide (43 mg/kg) and toluene modified DME (50 mg/kg) yield much better extraction yields than Soxhlet (32 mg/kg) or pure supercritical fluid extractions. Received: 19 July 1996 / Revised: 23 September 1996 / Accepted: 22 October 1996     

Orthogonal array design for the optimization of supercritical fluid extraction of baicalin from roots of Scutellaria baicalensis Georgi

Supercritical fluid was used to extract baicalin from the roots of Scutellaria baicalensis Georgi. An orthogonal array design (OAD), OA(9)(3(4)), was employed as a chemometric method for the optimization of the supercritical fluid extraction of baicalin from the herbal medicine. Four parameters, namely, modifiers, temperature and pressure of supercritical fluid, and the dynamic extraction time, were studied and optimized by a three-level OAD in which the interactions between the parameters were neglected. Determinations of the extracts were performed by high-performance liquid chromatography. The effects of parameters were studied using analysis of variance. The results showed that selection of the modifier was the main factor in attaining higher yields of baicalin. While the other three factors had some effect on the extraction of the compound, the effect was much less than that of the modifiers. 1,2-Propanediol-modified supercritical fluid was more effective than 95% ethanol-modified supercritical carbon dioxide or methanol-modified supercritical carbon dioxide for the extraction of baicalin from the solid matrix. Finally, experimental conditions were proposed which can provide the highest extraction yield with respect to the considered factors.     

Performance comparison between packed column supercritical fluid chromatography (SFC) and HPLC using cyclandelate as the model analyte

A reproducible and fast method has been developed for the assay of cyclandelate in bulk and drug forms using packed column supercritical fluid chromatography using dicyclohexyl phthalate (DCHP) as internal standard. The drug and the internal standard were resolved by elution with supercritical fluid carbon dioxide doped with 14.29% (v/v) methanol on an RP-C₁₈ column and detected spectrophotometrically at 228 nm. Chromatographic figures of merit using C₈, C₁₈, cyano and phenyl columns have been assessed. Parallel experiments have been performed by HPLC and the data have been compared. Supercritical fluid extraction using CO₂ modified with a small amount of methanol was found to give quantitative analytical recoveries of cyclandelate from a dosage form. SFC has been shown to be a viable, faster alternative technique to HPLC generating less disposable waste. Received: 20 June 1997 / Revised: 20 October 1997 / Accepted: 26 October 1997     

Supercritical fluid extraction of kava lactones from Piper methysticum (kava) herb

Supercritical fluid extraction of kava lactones from Piper methysticum Forst. herb is described here. The extraction was performed with supercritical carbon dioxide alone and supercritical carbon dioxide modified with 15% ethanol, and the extracts were analyzed by gas chromatography/mass spectrometry. Seven lactones including: 7,8-dihydrokavain; kavain; 5,6-dehydrokavain; 5, 6, 7, 8-tetrahydroyangonin; dihydromethysticin; yangonin; and methysticin were the major constituents in the SFE extract.     

A Unified Sample Preparation System for Extraction of Various Analyte/Matrix Combinations

A supercritical fluid extraction/enhanced solvent extraction system (SFE/ESE) was used to remove polar and non-polar analytes from various matrices. Extraction of environmental pollutants from soil, additives from low density polyethylene, sulfa drugs from animal tissue, and drug from tablet was performed using both SFE and ESE. Results showed that a single instrumental system can be used to perform both ESE with organic solvents and SFE with carbon dioxide-based fluids. Each method has its own unique advantages and applications. The ability to carry out both solvent extraction and supercritical fluid extraction with one system has obvious economical advantages.     

Superheated water extraction, steam distillation and SFE of peppermint oil

Superheated water extraction, steam distillation and supercritical fluid extraction (SFE) are compared for extraction of l-menthol, menthone, eucalyptol and other components of peppermint (mentha piperita) leaves. Different temperatures and pressures were investigated. SFE results at 25/40 °C and 6.5/8/10 MPa were comparable with those reported in the literature. Although SFE is a gentle way of extracting thermally unstable compounds, this method is too slow for commercial use in comparison with steam distillation at 100 °C. Superheated water extraction at 125/150 °C and 1–2 MPa exhibits higher extraction efficiency than the SFE method. Comparison of all experiments under the chosen conditions shows steam distillation to be the most effective extraction method. Received: 18 January 1998 / Revised: 9 April 1999 / Accepted: 15 April 1999     

Rhodium and palladium β-diketonate determination with on-line supercritical fluid extraction-high performance liquid chromatography via solid phase extraction

 An on-line system of supercritical fluid extraction (SFE) and high performance liquid chromatography (HPLC) via solid phase extraction (SPE) is described for the determination of palladium and rhodium 2,2,6,6-tetramethyl-3,5-heptanedione-(thd) as well as rhodium-acetylacetonate-(acac) and benzylacetonate-(bzac) chelates. The chelates were extracted with supercritical CO₂ from sand and humic acid, concentrated on SPE cartridges and analysed with HPLC. Two cartridge materials were tested and compared to off-line trapping. The percentage of the breakthrough and cartridge retained material were measured in liquid dichloromethane. The SFE conditions could be optimized to separate metal chelates during the extraction. The supercritical fluid (SF) behaviour of different ligands on rhodium were investigated. Received: 19 July 1996/Revised: 11 December 1996/Accepted: 14 December 1996     

Extraction and isolation of diphenylheptanes and flavonoids from Alpinia officinarum Hance using supercritical fluid extraction followed by supercritical fluid chromatography

In this paper, an off-line combination method of supercritical fluid extraction and supercritical fluid chromatography was developed for the selective extraction and isolation of diphenylheptanes and flavonoids from Alpinia officinarum Hance. The enrichment of target components was successfully achieved using supercritical fluid extraction with the following conditions (8% ethanol as co-solvent at 45°C and 30 MPa for 30 min). Taking full advantage of the complementarity of supercritical fluid chromatography stationary phases, a two-step preparative supercritical fluid chromatography strategy was constructed. The extract was firstly divided into seven fractions on a Diol column (250 × 20 mm internal diameter, 10 μm) within 8 min by gradient elution increasing from 5% to 20% modifier (methanol) at 55 ml/min and 15 MPa. Then the seven fractions were separated by using a 1-AA or a DEA column (250 × 19 mm internal diameter, 5 μm) at 50 ml/min and 13.5 MPa. This two-step strategy showed superior separation ability for structural analogs. As a result, seven compounds, including four diphenylheptanes and three flavonoids with high purity, were successfully obtained. The developed method is also helpful for the extraction and isolation of other structural analogs of traditional Chinese medicines.     

Supercritical fluid extraction of isoflavones from biological samples with ultra-fast high-performance liquid chromatography/mass spectrometry

An efficient method of modifier addition for supercritical fluid extraction (SFE) of polar isoflavones was developed and yielded extraordinarily high recoveries. To find the optimal extraction conditions, a temperature and pressure optimization and modifier impact study was performed in naturally contaminated and spiked samples. Ultra-fast high-performance liquid chromatography/mass spectrometry (HPLC/MS) was used for the determination of isoflavones on an Atlantis dC18 high-speed reversed phase chromatographic column (20 x 2.1 mm, 3 microm particle size). A newly elaborated supercritical fluid extraction (SFE) procedure allowed more accurate (< 5%) and precise (< 4-7%) determination of isoflavones in biological materials. The HPLC/MS method significantly reduced analysis time with simultaneous improvement of sensitivity and detection limits. The on-column limits of detection LOD (S/N = 3) for isoflavone glycosides (daidzin, genistin, glycitin, ononin, and sissotrin) were 1.3-3.6 fmol and 0.2-1.0 fmol for aglycones (daidzein, glycitein, genistein, formononetin, and biochanin A), respectively.     

Applications of On-Line SFE/SFC in Environmental Analysis

Polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs) and organochlorinated Pesticides (OCPs) on different absorbents were extracted and analyzed by a directly coupled supercritical fluid extraction and supercritical fluid chromatography system (on-line SFE/SFC). The influence of various absorbents as sample matrixes on extraction efficiencies was evaluated. In general, the extraction efficiencies were decreased if a matrix had a larger surface area and a smaller pore size. The recoveries of PAHs and PCBs were decreased in inverse proportion to their molar mass. Recoveries of OCPs containing epoxy functional groups were greater than for OCPs lacking this functional group. In conclusion, online SFE/SFC is a rapid (1-2 h) and high recovery (70%-100%) analytical technique.     

Supercritical fluid extraction of polychlorinated dibenzo-p-dioxins from municipal incinerator fly ash

The supercritical fluid extraction of polychlorinated dibenzo-p-dioxins from an incinerator fly ash sample has been investigated; supercritical nitrous oxide and its mixtures with methanol and toluene were employed as mobile phases. Recoveries of individual polychlorinated dibenzo-p-dioxins congeners were calculated from results of analysis of ¹³C-labeled dioxins by high resolution GC-MS employing selected ion monitoring. The extraction procedure was compared with extraction in a Soxhlet apparatus, which is currently used as a standard method for removing chlorinated dibenzo-p-dioxins from fly ash samples: the results indicated that the time required for the extraction and clean-up can be reduced from 24 to 2.5 hours/sample. Quantitative recovery of the chlorinated dibenzo-p-dioxins was achieved at μg/kg levels, the relative standard deviation was between 1.8 and 5.8%. The use of a virtually inert fluid such as pure nitrous oxide provides significant improvement over conventional extraction procedures because no solvent residue is left in the processed extract.     

Modeling of supercritical fluid extraction of flavonoids from Calycopteris floribunda leaves

The aim of this study was to obtain flavonoids extracts from Calycopteris floribunda leaves using supercritical fluid extraction (SFE) with CO₂ and a co-solvent. Pachypodol, a potential anticancer drug lead compound separated from the extracts, was examined. Classical organic solvent extraction (CE) with ethanol was performed to evaluate the high pressure method. HPLC analysis was introduced to interpret the differences between SFE and CE extracts in terms of antioxidant activity and the concentration of pachypodol. SFE kinetics and mathematical modeling of the overall extraction curves (OEC) were investigated. Evaluation of the models against experimental data showed that the Sovová model performs the best. The supercritical fluid extraction process was optimized using a central composite design (CCD), where temperature and pressure were adjusted. The optimal conditions of SFE were: pressure of 30 MPa and temperature of 35°C.