Multifunctional core–shell nanoparticles: superparamagnetic,mesoporous, and thermosensitive

Multifunctional core–shell composite nanoparticles (NPs) have been developed by the combination of three functionalities into one entity, which is composed of a single Fe₃O₄ NP as the magnetic core, mesoporous silica (mSiO₂) with cavities as the sandwiched layer, and thermosensitive poly(N-isopropylacrylamide-co-acrylamide) (P(NIPAAm-co-AAm)) copolymer as the outer shell. The mSiO₂-coated Fe₃O₄ NPs (Fe₃O₄@mSiO₂) are monodisperse and the particle sizes were varied from 25 to 95 nm by precisely controlling the thickness of mSiO₂-coating layer. The P(NIPAAm-co-AAm) were then grown onto surface-initiator-modified Fe₃O₄@mSiO₂ NPs through free radical polymerization. These core–shell composite NPs (designated as Fe₃O₄@mSiO₂@P(NIPAAm-co-AAm)) were found to be superparamagnetic with high r ₂ relaxivity. To manipulate the phase transition behavior of these thermosensitive polymer-coated NPs for future in vivo applications, the characteristic lower critical solution temperature (LCST) was subtly tuned by adjusting the composition of the monomers to be around the human body temperature (i.e. 37 °C), from ca. 34 to ca. 42 °C. The thermal response of the core–shell composite NPs to the external magnetic field was also demonstrated. Owing to their multiple functionality characteristics, these porous superparamagnetic and thermosensitive NPs may prove valuable for simultaneous magnetic resonance imaging (MRI), temperature-controlled drug release, and temperature-programed magnetic targeting and separation applications.     

Synthesis and characterization of noscapine loaded magnetic polymeric nanoparticles

The delivery of noscapine therapies directly to the site of the tumor would ultimately allow higher concentrations of the drug to be delivered, and prolong circulation time in vivo to enhance the therapeutic outcome of this drug. Therefore, we sought to design magnetic based polymeric nanoparticles for the site directed delivery of noscapine to invasive tumors. We synthesized Fe₃O₄ nanoparticles with an average size of 10±2.5 nm. These Fe₃O₄ NPs were used to prepare noscapine loaded magnetic polymeric nanoparticles (NMNP) with an average size of 252±6.3 nm. Fourier transform infrared (FT-IR) spectroscopy showed the encapsulation of noscapine on the surface of the polymer matrix. The encapsulation of the Fe₃O₄ NPs on the surface of the polymer was confirmed by elemental analysis. We studied the drug loading efficiency of polylactide acid (PLLA) and poly (l-lactide acid-co-gylocolide) (PLGA) polymeric systems of various molecular weights. Our findings revealed that the molecular weight of the polymer plays a crucial role in the capacity of the drug loading on the polymer surface. Using a constant amount of polymer and Fe₃O₄ NPs, both PLLA and PLGA at lower molecule weights showed higher loading efficiencies for the drug on their surfaces.     

One-pot synthesis and characterization of rhodamine derivative-loaded magnetic core–shell nanoparticles

A new method to produce elaborate nanostructure with magnetic and fluorescent properties in one entity is reported in this article. Magnetite (Fe₃O₄) coated with fluorescent silica (SiO₂) shell was produced through the one-pot reaction, in which one reactor was utilized to realize the synthesis of superparamagnetic core of Fe₃O₄, the formation of SiO₂ coating through the condensation and polymerization of tetraethylorthosilicate (TEOS), and the encapsulation of tetramethyl rhodamine isothiocyanate-dextran (TRITC-dextran) within silica shell. Transmission electron microscopy (TEM), energy dispersive X-ray (EDX) analysis, and X-ray diffraction (XRD) were carried out to investigate the core–shell structure. The magnetic core of the core–shell nanoparticles is 60 ± 10 nm in diameter. The thickness of the fluorescent SiO₂ shell is estimated at 15 ± 5 nm. In addition, the fluorescent signal of the SiO₂ shell has been detected by the laser confocal scanning microscopy (LCSM) with emission wavelength (λ_em) at 566 nm. In addition, the magnetic properties of TRITC-dextran loaded silica-coating iron oxide nanoparticles (Fe₃O₄@SiO₂ NPs) were studied. The hysteresis loop of the core–shell NPs measured at room temperature shows that the saturation magnetization (M _s) is not reached even at the field of 70 kOe (7T). Meanwhile, the very low coercivity (H _c) and remanent magnetization (M _r) are 0.375 kOe and 6.6 emu/g, respectively, at room temperature. It indicates that the core–shell particles have the superparamagnetic properties. The measured blocking temperature (T _B) of the TRITC-dextran loaded Fe₃O₄@SiO₂ NPs is about 122.5 K. It is expected that the multifunctional core–shell nanoparticles can be used in bio-imaging.     

Biocompatibility of various ferrite nanoparticles evaluated by in vitro cytotoxicity assays using HeLa cells

Magnetic nanoparticles for thermotherapy must be biocompatible and possess high thermal efficiency as heating elements. The biocompatibility of Fe₃O₄ (20-30 nm), ZnFe₂O₄ (15-30 nm) and NiFe₂O₄ (20-30 nm) nanoparticles was studied using a cytotoxicity colony formation assay and a cell viability assay. The Fe₃O₄ sample was found to be biocompatible on HeLa cells. While ZnFe₂O₄ and NiFe₂O₄ were non-toxic at low concentrations, HeLa cells exhibited cytotoxic effects when exposed to concentrations of 100 μg/ml nanoparticles.     

Preparation and characterization of Fe3O4 magnetic composite microspheres covered by a P(MAH-co-MAA) copolymer

A magnetic core–shell-layered polymer microsphere (MPS) was successfully synthesized by a dispersion polymerization route, where the modified Fe₃O₄ nanoparticles (MFN) were used as a core, while poly(maleic anhydride-co-methacrylic acid) P(MAH-co-MAA) as a shell was covered on the surface of the Fe₃O₄ nanoparticles. Environmental scanning electron microscope (ESME) and transmission electron microscope (TEM) measurements indicate that the magnetic P(MAH-co-MAA)/Fe₃O₄ composite microspheres assume sphericity and have a novel core–shell-layered structure. The crystal particle sizes of the unimproved Fe₃O₄ and the MFN samples vary from 8 to 16 nm in diameter, and the average size is about 10.6 nm in diameter. The core–shell magnetic composite microspheres can be adjusted by changing the stirring speed. Since multiple Fe₃O₄ cores were coated with a proper percentage of P(MAH-co-MAA) copolymers, and therefore lower density was acquired for the MPS, which improved sedimentation and dispersion behavior. The saturated magnetization of pure Fe₃O₄ nanoparticles reaches 48.1 emu g⁻¹ and the value for composite nanoparticles was as high as 173.5 emu g⁻¹. The nanoparticles show strong superparamagnetic characteristics and can be expected to be used as a candidate for magnetism-controlled drug release.     

Optimization of ultrasonic-assisted approach for synthesizing a highly stable biocompatible bismuth-coated iron oxide nanoparticles using a face-centered central composite design

The incorporation of additional functional groups such as bismuth nanoparticles (Bi NPs) into magnetite nanoparticles (Fe₃O₄ NPs) is critical for their properties modification, stabilization, and multi-functionalization in biomedical applications. In this work, ultrasound has rapidly modified iron oxide (Fe₃O₄) NPs via incorporating their surface through coating with Bi NPs, creating unique Fe₃O₄@Bi composite NPs. The Fe₃O₄@Bi nanocomposites were synthesized and statistically optimized using an ultrasonic probe and response surface methodology (RSM). A face-centered central composite design (FCCD) investigated the effect of preparation settings on the stability, size, and size distribution of the nanocomposite. Based on the numerical desirability function, the optimized preparation parameters that influenced the responses were determined to be 40 ml, 5 ml, and 12 min for Bi concentration, sodium borohydride (SBH) concentration, and sonication time, respectively. It was found that the sonication time was the most influential factor in determining the responses. The predicted values for the zeta potential, hydrodynamic size, and polydispersity index (PDI) at the highest desirability solution (100%) were −45 mV, 122 nm, and 0.257, while their experimental values at the optimal preparation conditions were −47.1 mV, 125 nm, and 0.281, respectively. Dynamic light scattering (DLS) result shows that the ultrasound efficiently stabilized and functionalized Fe₃O₄NPs following modification to Fe₃O₄@Bi NPs, improved the zeta potential value from –33.5 to −47.1 mV, but increased the hydrodynamic size from 98 to 125 nm. Energy dispersive spectroscopy (EDX) validated the elemental compositions and Fourier transform infrared spectroscopy (FTIR) confirmed the presence of Sumac (Rhus coriaria) compounds in the composition of the nanocomposites. The stability and biocompatibility of Fe₃O₄@Bi NPs were improved by using the extract solution of the Sumac edible plant. Other physicochemical results revealed that Fe₃O₄NPs and Fe₃O₄@Bi NPs were crystalline, semi-spherical, and monodisperse with average particle sizes of 11.7 nm and 19.5 nm, while their saturation magnetization (Ms) values were found to be 132.33 emu/g and 92.192 emu/g, respectively. In vitro cytotoxicity of Fe₃O₄@Bi NPs on the HEK-293 cells was dose- and time-dependent. Based on our findings, the sonochemical approach efficiently produced (and RSM accurately optimized) an extremely stable, homogeneous, and biocompatible Fe₃O₄@Bi NPs with multifunctional potential for various biomedical applications.     

Synthesis and characterization of functionalized core-shell γFe2O3-SiO2 nanoparticles

Amino and/or polyethyleneglycol (PEG) functionalized core-shell γFe₂O₃-SiO₂ magnetic nanoparticles were synthesized and characterized. Amino-PEG-functionalized core-shell nanoparticles have calibrated sizes and a good colloidal stability. These bi-functionalized core-shell nanoparticles are potentially useful as biocompatible particles for magnetically targeted chemotherapy.     

Study of structural and magnetic properties of superparamagnetic Fe3O4/SiO2 core–shell nanocomposites synthesized with hydrophilic citrate-modified Fe3O4 seeds via a sol–gel approach

This paper describes a simple way for the coating of magnetite nanoparticles (MNPs) with amorphous silica. First, MNPs were synthesized by controlled co-precipitation technique under N₂ gas and then their surface was modified with trisodium citrate in order to achieve particles with improved dispersibility. Afterward, magnetite-silica core/shell nanocomposites were prepared by a sol–gel approach, using magnetic fluid including electrostatically stabilized MNPs as seeds. The prepared samples were characterized by means of X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR) spectroscopy, zeta potential analysis and vibrating sample magnetometer (VSM) in order to study their structural and magnetic properties. FT-IR and XRD results imply that resultant nanocomposites are consisted of two compounds; Fe₃O₄ and SiO₂ and TEM images confirm formation of their core/shell structure. TEM images also show increase in silica shell thickness from ∼5 to ∼24 nm with increase in amount of tetraethyl orthosilicate (TEOS) used during the coating process from 0.1 to 0.3 mL. Magnetic studies indicate that Fe₃O₄ nanoparticles remain superparamagnetic after coating with silica although their M_s values are significantly less than pristine MNPs. These core/shell nanocomposites offer a high potential for different biomedical applications due to having superparamagnetic property of magnetite and unique properties of silica.     

Biodegradable thermoresponsive polymeric magnetic nanoparticles: a new drug delivery platform for doxorubicin

The use of nanoparticles as drug delivery systems for anticancer therapeutics has great potential to revolutionize the future of cancer therapy. The aim of this study is to construct a novel drug delivery platform comprising a magnetic core and biodegradable thermoresponsive shell of tri-block-copolymer. Oleic acid-coated Fe₃O₄ nanoparticles and hydrophilic anticancer drug “doxorubicin” are encapsulated with PEO–PLGA–PEO (polyethylene oxide–poly d, l lactide-co-glycolide–polyethylene oxide) tri-block-copolymer. Structural, magnetic, and physical properties of Fe₃O₄ core are determined by X-ray diffraction, vibrating sample magnetometer, and transmission electron microscopy techniques, respectively. The hydrodynamic size of composite nanoparticles is determined by dynamic light scattering and is found to be ~36.4 nm at 25 °C. The functionalization of magnetic core with various polymeric chain molecules and their weight proportions are determined by Fourier transform infrared spectroscopy and thermogravimetric analysis, respectively. Encapsulation of doxorubicin into the polymeric magnetic nanoparticles, its loading efficiency, and kinetics of drug release are investigated by UV–vis spectroscopy. The loading efficiency of drug is 89% with a rapid release for the initial 7 h followed by the sustained release over a period of 36 h. The release of drug is envisaged to occur in response to the physiological temperature by deswelling of thermoresponsive PEO–PLGA–PEO block-copolymer. This study demonstrates that temperature can be exploited successfully as an external parameter to control the release of drug.     

Control synthesis of magnetic Fe3O4–chitosan nanoparticles under UV irradiation in aqueous system

Novel magnetic Fe₃O₄–chitosan nanoparticles were synthesized via photochemical method in an emulsifier-free aqueous system at room temperature for the first time. The scanning electron microscopy (SEM) and transmission electron microscopy (TEM) results showed that the Fe₃O₄–chitosan nanoparticles were in regular shape with a mean diameter of 41 nm, whereas the average size in aqueous solution measured by photocorrelation spectroscopy (PCS) was 64 nm, which indicated that the nanoparticles had water-swelling properties. X-ray diffraction (XRD) patterns indicated that the Fe₃O₄ nanoparticles were pure Fe₃O₄ with a spinel structure, and the irradiation under UV light did not result in a phase change. The Fe₃O₄–chitosan nanoparticles were also characterized by Fourier transform infrared (FTIR) spectra, thermogravimetric analysis (TGA) and vibrating sample magnetometer (VSM). Magnetic measurement revealed that the saturated magnetization (Ms) of the Fe₃O₄–chitosan nanoparticles reached 48.6 emu/g and the nanoparticles showed the characteristics of superparamagnetism. The stability test showed these novel nanoparticles had high magnetic stability. The PCS and TGA results indicated that the size and chitosan content of Fe₃O₄–chitosan nanoparticles formed was pH- and chitosan/Fe₃O₄ ratio-dependent, which could be used to synthesize magnetic Fe₃O₄–chitosan nanoparticles with different size to meet the requirements of different applications.     

Synthesis of magnetic core–shell Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>–Au nanoparticle for biomolecule immobilization and detection

The production of monodispersed magnetic nanoparticles with appropriate surface modification has attracted increasing attention in biomedical applications including drug delivery, separation, and purification of biomolecules from the matrices. In the present study, we report rapid and room temperature reaction synthesis of gold-coated iron nanoparticles in aqueous solution using the borohydride reduction of HAuCl₄ under sonication for the first time. The resulting nanoparticles were characterized with transmission electron microscopy (TEM), electron spectroscopy for chemical analysis (ESCA), ultraviolet visible spectroscopy (UV–Vis), and X-ray diffraction (XRD). Surface charges and magnetic properties of the nanoparticles were also examined. The pattern of Fe₃O₄ nanoparticles is face centered cubic with an average diameter of 9.5 nm and the initial reduction of gold on the surface of Fe₃O₄ particles exhibits uniform Fe₃O₄–Au nanoparticles with an average diameter of 12.5 nm. The saturation magnetization values for the uncoated and gold-coated Fe₃O₄ nanoparticles were found to be 30 and 4.5 emu/g, respectively, at 300 K. The progression of binding events between boronic acid terminated ligand shell and fructose based on the covalent bonding interaction was measured by absorbance spectral changes. Immunomagnetic separation was also performed at different E. coli concentration to evaluate capturing efficiency of resulting nanoparticles. Immunomagnetic separation percentages were varied in a range of 52.1 and 21.9% depend on the initial bacteria counts.     

Synthesis and characterization of Fe3O4@C@Ag nanocomposites and their antibacterial performance

We synthesized Fe₃O₄@C@Ag nanocomposites through a combination of solvothermal, hydrothermal, and chemical redox reactions. Characterization of the resulting samples by X-ray diffraction, Fourier-transform infrared spectroscopy, field-emission scanning and transmission electron microscopy, and magnetic measurement is reported. Compared to Fe₃O₄@Ag nanocomposites, the Fe₃O₄@C@Ag nanocomposites showed enhanced antibacterial activity. The Fe₃O₄@C@Ag nanocomposites were able to almost entirely prevent growth of Escherichia coli when the concentration of Ag nanoparticles was 10 μg/mL. Antibacterial activity of the Fe₃O₄@C@Ag nanocomposites was maintained for more than 40 h at 37 °C. The intermediate carbon layer not only protects magnetic core, but also improves the dispersion and antibacterial activity of the silver nanoparticles. The magnetic core can be used to control the specific location of the antibacterial agent (via external magnetic field) and to recycle the residual silver nanoparticles. The Fe₃O₄@C@Ag nanocomposites will have potential uses in many fields as catalysts, absorbents, and bifunctional magnetic-optical materials.     

Preparation and study of magnetic properties of silico phosphate glass and glass-ceramics having iron and zinc oxide

The magnetic properties of 25SiO₂–50CaO–15P₂O₅–(10−x)Fe₂O₃−xZnO (where x=0, 2, 5 mol%) glass and glass-ceramics have been studied. These glasses are prepared by melt quench technique and heat treated at 800 °C for 6 h. Electron Spectroscopy for Chemical Analysis (ESCA) revealed that the fraction of non-bridging oxygen decreases with the increase in zinc oxide content. Evolution of crystalline phases in glass-ceramics has been studied by X-ray diffraction (XRD). The microstructure as seen by scanning electron microscopy (SEM) exhibits formation of nanosize particles. Effect of controlled heat treatment on magnetic properties was studied by means of a Superconducting Quantum Interference Device (SQUID) magnetometer. Mössbauer spectroscopy at room temperature was also carried out to determine the state of iron ions in glasses and glass-ceramics. Isomer shift values of the glasses suggest that Fe³⁺ and Fe²⁺ are in tetrahedral coordination. The analysis of the glass without ZnO shows about 58 wt% of total iron ions is in the Fe³⁺ state. The samples on heat treatment show improved magnetic properties due to the formation of magnetic nanoparticles. Magnetic studies revealed the relaxation of magnetic particles and the increase in saturation magnetization with addition of 2 mol% ZnO. Increase in ZnO content results in decrease in the strength of dipolar interactions.     

Sonochemical activation-assisted biosynthesis of Au/Fe3O4 nanoparticles and sonocatalytic degradation of methyl orange

In this research, a sonochemical activation-assisted biosynthesis of Au/Fe₃O₄ nanoparticles is proposed. The proposed synthesis methodology incorporates the use of Piper auritum (an endemic plant) as reducing agent and in a complementary way, an ultrasonication process to promote the synthesis of the plasmonic/magnetic nanoparticles (Au/Fe₃O₄). The synergic effect of the green and sonochemical synthesis favors the well-dispersion of precursor salts and the subsequent growth of the Au/Fe₃O₄ nanoparticles.The hybrid green/sonochemical process generates an economical, ecological and simplified alternative to synthesizing Au/Fe₃O₄ nanoparticles whit enhanced catalytic activity, pronounced magnetic properties. The morphological, chemical and structural characterization was carried out by high- resolution Scanning electron microscopy (HR-SEM), Energy Dispersive X-Ray Spectroscopy (EDS) and X-Ray diffraction (XRD), respectively. Ultraviolet–visible (UV–vis) and X-ray photoelectron (XPS) spectroscopy confirm the Au/Fe₃O₄ nanoparticles obtention. The magnetic properties were evaluated by a vibrating sample magnetometer (VSM). Superparamagnetic behavior, of the Au/ Fe₃O₄ nanoparticles was observed (M_s = 51 emu/g and H_c = 30 Oe at 300 K). Finally, the catalytic activity was evaluated by sonocatalytic degradation of methyl orange (MO). In this stage, it was possible to achieve a removal percentage of 91.2% at 15 min of the sonocatalytic process (160 W/42 kHz). The initial concentration of the MO was 20 mg L⁻¹, and the Fe3O4-Au dosage was 0.075 gL⁻¹. The MO degradation process was described mathematically by four kinetic adsorption models: Pseudo-first order model, Pseudo-second order model, Elovich and intraparticle diffusion model.     

Synthesis and characterization of “mulberry”-like Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/multiwalled carbon nanotube nanocomposites

Nanocomposites composed of multi-wall carbon nanotubes (MWNTs) and Fe₃O₄ nanoparticles were fabricated using solvothermal method. Transmission and scanning electron microscopy, energy dispersive spectroscopy, and X-ray powder diffraction measurements confirmed that these mulberry-like Fe₃O₄ microparticles which were combined with the MWNTs in a random pattern are constructed with tiny nanocrystallites (12 nm in average diameter). The magnetic properties of the Fe₃O₄/MWNTs nanocomposites were measured using a vibrating sample magnetometer. Results showed that the Fe₃O₄/MWNTs nanocomposites exhibited superparamagnetism at room temperature and possessed a lower saturation magnetization (around 27.6 emu/g) than that of the pure Fe₃O₄ nanoparticles (around 33.7 emu/g). The Fe₃O₄/MWNTs nanocomposites have potential applications in engineering and medicine.     

Magnetic properties of SiO2-coated iron oxide nanoparticles studied by polarized small angle neutron scattering

The structural and magnetic properties of non-coated and SiO₂-coated iron oxide (Fe₃O₄) nanoparticles (NPs) were investigated by a polarized small-angle neutron scattering (P-SANS) method. Measurement of the P-SANS allowed us to obtain nuclear and magnetic scattering cross sections of the NPs under applied magnetic field. The analysis of the scattering intensity provided the structural parameters and the spatial magnetization distribution of the non-coated and the SiO₂ coated core–shell NPs. The measured radius of both NPs and the shell thickness of the core–shell NPs were in consistent with those measured by the transmission electron microscopy. In comparison, the magnetic core radii of both NPs were 0.12–0.6 nm smaller than the nuclear radii, indicating the magnetization reduction in the surface region of core Fe₃O₄ in both NPs. However, the reduced magnetization region, which is the surface spin canting region, of the SiO₂-coated NPs was relatively narrower than that of the non-coated NPs. We suggest that the SiO₂ coating on the Fe₃O₄ NPs may stabilize the spin order of atoms and prohibit the oxidation or defect formation at the surface region of the Fe₃O₄ NPs, and enhance the corresponding magnetization of the Fe₃O₄ NPs by the reduction of the spin canting layer thickness.     

Preparation and characterization of Fe3O4(1 1 1) nanoparticles and thin films on Au(1 1 1)

Fe₃O₄ nanoparticles and thin films were prepared on the Au(1 1 1) surface and characterized using X-ray photoelectron spectroscopy (XPS) and scanning tunneling microscopy (STM). Fe₃O₄ was formed by annealing α-Fe₂O₃(0 0 0 1) structures on Au(1 1 1) at 750 K in ultrahigh vacuum (UHV) for 60 min. Transformation of the α-Fe₂O₃(0 0 0 1) structures into Fe₃O₄ nanoparticles and thin films was supported by XPS. STM images show that during the growth procedure used, Fe₃O₄ initially appears as nanoparticles at low coverages, and forms thin films at ～2 monolayer equivalents (MLE) of iron. Two types of ordered superstructures were observed on the Fe₃O₄ particles with periodicities of ～50 and ～42 Å, respectively. As the Fe₃O₄ particles form more continuous films, the ～50 Å feature was the predominant superstructure observed. The Fe₃O₄ structures at all coverages show a hexagonal unit cell with a ～3 Å periodicity in the atomically resolved STM images.     

The Study of Aggregation Processes in Colloidal Solutions of Magnetite–Silica Nanoparticles by NMR Relaxometry,AFM, and UV–Vis-Spectroscopy

Colloidal solutions of magnetic nanoparticles were studied as a promising magnetic resonance imaging (MRI) contrast agent. The problem of aggregative stability of solutions is considered. Sol-gel synthesis of magnetite colloidal solutions stabilized by silica is described. Transmittance spectra were measured to analyze sedimentation of nanoparticles in magnetite–silica solutions of different compositions and concentrations. It is shown that the synthesized nanoparticles can be used as MRI contrast agents. The surface morphology and particle size of Fe₃O₄/SiO₂ layers were estimated by atomic force mictroscopy (AFM) technique. The mechanism of magnetic-field-induced aggregation of Fe₃O₄/SiO₂ nanoparticles into chain-like and fractal structures is described.     

In Vitro Studies of Fe3O4-ZIF-8 Core–Shell Nanoparticles Designed as Potential Theragnostics

Theragnostics represent a combination of therapy and diagnosis within one system. Herein, Fe₃O₄-ZIF-8 core–shell nanoparticles are developed and suggested as candidates for theragnostic applications in cancer treatment. A drug loaded metal–organic framework ZIF-8 (zeolitic imidazolate framework-8) represents the therapeutic tool, while the Fe₃O₄ core is included to enable the material visualization by magnetic resonance imaging (MRI). A reliable synthesis of Fe₃O₄-ZIF-8 core–shell nanoparticles of an average size below 100 nm is reported. The nanoparticles are characterized by FT-IR, TGA, XRPD, TEM, STEM-EDS, DLS, ICP-OES, CHN-elemental analysis, SQUID measurements, and MRI. Moreover, their chemical stability and in vitro cytotoxicity against fibroblast and selected cancer cell lines are evaluated. As a model drug, arsenic trioxide—a promising anticancer drug—is used. The drug release can be triggered by a pH change from 7.4 to 6.0 and the nanoparticles can be visualized by MRI in vitro, thus a potential theragnostic agent for cancer treatment is developed.     

Preparation and photocatalytic properties of magnetically reusable Fe3O4@ZnO core/shell nanoparticles

Fe₃O₄@ZnO binary nanoparticles were synthesized by a simple two-step chemical method and characterized using various analytical instruments. TEM result proved the binary nanoparticles have core/shell structures and average particle size is 60 nm. Photocatalytic investigation of Fe₃O₄@ZnO core/shell nanoparticles was carried out using rhodamine B (RhB) solution under UV light. Fe₃O₄@ZnO core/shell nanoparticles showed enhanced photocatalytic performance in comparison with the as prepared ZnO nanoparticles. The enhanced photocatalytic activity for Fe₃O₄@ZnO might be resulting from the higher concentration of surface oxygen vacancies and the suppressing effect of the Fe³⁺ ions on the recombination of photoinduced electron–hole pairs. Magnetization saturation value (5.96 emu/g) of Fe₃O₄@ZnO core/shell nanoparticles is high enough to be magnetically removed by applying a magnetic field. The core/shell photocatalyst can be easily separated by using a commercial magnet and almost no decrease in photocatalytic efficiency was observed even after recycling six times.