Sm2O3Ga2O3 and Gd2O3Ga2O3 phase diagrams

Four definite compounds exist in the Sm₂O₃Ga₂O₃ binary phase diagram, namely: Sm₃GaO₆, Sm₄Ga₂O₉, SmGaO₃, and Sm₃Ga₅O₁₂. The $\text{3}\text{1}$ compound is orthorhombic (space group Pnna - Z.4) with the cell parameters: a = 11.40₀Å, b = 5.51₅Å, c = 9.07Å and belongs to the oxysel family. Sm₃GaO₆ and SmGaO₃ melt incongruently at 1715 and 1565°C; Sm₄Ga₂O₉ and Sm₃Ga₅O₁₂ have a congruent melting point at 1710 and 1655°C. With regard to the Gd₂O₃Ga₂O₃ system three definite compounds have been identified: Gd₃GaO₆, Gd₄Ga₂O₉, and Gd₃Ga₅O₁₂. Only the garnet melts congruently at 1740°C with the following composition: Gd_3.12Ga_4.88O₁₂. Gd₃GaO₆, and Gd₄Ga₂O₉ melt incongruently at 1760 and 1700°C. GdGaO₃ is only obtained by melt overheating which may yield an equilibrium or a metastable phase diagram.     

Garnet-perovskite transformations in the Sm2O3Ga2O3 and Gd2O3Ga2O3 systems

The effect of heating garnet melts to various temperatures has been investigated. The previously reported decomposition of the garnet phase due to loss of Ga₂O₃ was corroborated. However, it was also observed that when gallium oxide loss is prevented and the maximum temperature of the melt exceeds a critical value, phase separation of garnet to perovskite and β-gallium oxide occurs:

$\text{RE}{}_3\text{Ga}{}_5\text{O}{}_{12}\text{?3RE}\text{GaO}{}_3\text{+}\text{Ga}{}_2\text{O}{}_3$

.The reverse reaction will occur by reheating the two-phase mixture to the garnet melting point.     

Structural changes resulting from doping Ti2O3 with Sc2O3 or Al2O3

The crystal structures of (Ti_1?xSc_x)₂O₃, x = 0.0038, 0.0109, and 0.0413, and of (Ti_0.99Al_0.01)₂O₃, have been determined from X-ray diffraction data collected from single crystals using an automated diffractometer, and have been refined to weighted residuals of 25–34. Cell constants have also been determined for x = 0.0005, 0.0019, and 0.0232. The compounds are rhombohedral, space group $\text{R}\text{3}\text{c}$, and are isomorphous with α-Al₂O₃. The hexagonal cell dimensions range from a = 5.1573(2)Å, c = 13.613(1)Å for (Ti_0.9995Sc_0.0005)₂O₃ to a = 5.1659(4)Å, c = 13.644(1)Å for (Ti_0.9587Sc_0.0413)₂O₃, and a = 5.1526(2)Å, c = 13.609(1)Å for (Ti_0.99Al_0.01)₂O₃. Sc and Al substitution cause similar increases in the short near-neighbor metal-metal distance across the shared octahedral face; for Sc doping the increase is from 2.578(1) Å in pure Ti₂O₃ to 2.597(1) Å in (Ti_0.9587Sc_0.0413)₂O₃. By contrast, changes in the metal-metal distance across the shared octahedral edge appear to be governed by ionic size effects. The distance increases from 2.994(1) Å in Ti₂O₃ to 3.000(1) Å in (Ti_0.9587Sc_0.0413)₂O₃ and decreases to 2.991(1) Å in (Ti_0.99Al_0.01)₂O₃.     

Ion-beam irradiation of lanthanum compounds in the systems La2O3-Al2O3 and La2O3-TiO2

Thin crystals of La₂O₃, LaAlO₃, La_2/3TiO₃, La₂TiO₅, and La₂Ti₂O₇ have been irradiated in situ using 1 MeV Kr²⁺ ions at the Intermediate Voltage Electron Microscope-Tandem User Facility (IVEM-Tandem), Argonne National Laboratory (ANL). We observed that La₂O₃ remained crystalline to a fluence greater than 3.1×10¹⁶ ions cm⁻² at a temperature of 50 K. The four binary oxide compounds in the two systems were observed through the crystalline-amorphous transition as a function of ion fluence and temperature. Results from the ion irradiations give critical temperatures for amorphisation (T_c) of 647 K for LaAlO₃, 840 K for La₂Ti₂O₇, 865 K for La_2/3TiO₃, and 1027 K for La₂TiO₅. The T_c values observed in this study, together with previous data for Al₂O₃ and TiO₂, are discussed with reference to the melting points for the La₂O₃-Al₂O₃ and La₂O₃-TiO₂ systems and the different local environments within the four crystal structures. Results suggest that there is an observable inverse correlation between T_c and melting temperature (T_m) in the two systems. More complex relationships exist between T_c and crystal structure, with the stoichiometric perovskite LaAlO₃ being the most resistant to amorphisation.     

BaO-Al2O3-B2O3系密封玻璃的结构与性质

The BaO-Al₂O₃-B₂O₃ glasses manufactured for solid oxide fuel cell(SOFC) sealing were studied. The effect of different n_BaO/n_B2O3 on crystal, thermal properties, density and infrared spectra of this system has been discussed. The results show that the trends of crystallization, glass transformation temperature, dilatometric softening temperature and density increase with n_BaO/n_B2O3 values. But a typical property deviation occurs when n_BaO/n_B2O3 is 0.875, and its coefficient of thermal expansion has the maximum at this point. The changes of properties can attribute to the conversion of boron from tetrahedral coordination to trigonal, breakage of the local glass network and interaction between the network modifiers. These can be proved by infrared spectra of glasses. Thermal properties of some studied samples are suitable for the sealing of SOFC using Sm doped ceria electrolyte and operating at 400～600 ℃.     

Chemical twinning of the pyrochlore structure in the system Bi2O3-Fe2O3-Nb2O5

New ternary bismuth iron niobates having structures based on chemical twinning of pyrochlore are described. Bi_5.67Nb₁₀FeO₃₅ has hexagonal symmetry, P6₃/mmc, , , Z=2 and Bi_9.3Nb_16.9Fe_1.1O_57.8 has rhombohedral symmetry, R-3m, , , Z=3. The structures of both phases were determined and refined to R₁=0.04 using single-crystal X-ray data. They can be described as being derived from the pyrochlore structure by chemical twinning on (111)_py oxygen planes. The chemical twin operation produces pairs of corner-connected hexagonal tungsten bronze (HTB) layers as in the HTB structure, so the structures may alternatively be described as pyrochlore:HTB unit-cell intergrowth structures. In the hexagonal phase the pyrochlore blocks have a width of 12 Å, whereas the rhombohedral phase has pyrochlore blocks of two widths, 6 and 12 Å, alternating with HTB blocks. It is proposed that the previously reported binary 4Bi₂O₃:9Nb₂O₅ phase has a related structure containing pyrochlore blocks all of width 6 Å. A feature of the structures is partial occupancy (∼65%) of the Bi sites and displacement of the Bi atoms from the ideal pyrochlore A sites towards the surrounding oxygen atoms, as observed in Bi-containing pyrochlores.     

Partial oxidation of methane on Cr2O3/Al2O3

The oxidation of methane on supported chromia was studied at temperatures varying between 423 and 743 K and CH₄/O₂ ratios between 1 and 9 in a differential reactor. The main reaction products observed were carbon monoxide and formaldehyde. The rates of reaction obey a power law expression.

---

, 423 743 CH₄/O₂ 1 9, . . .

     

Surface acidity of the La2O3/Al2O3 system

Surface acidity of aluminium oxide containing 5 wt. % lanthanum oxide has been determined by IR spectroscopy. Strength of Lewis sites of the La₂O₃/Al₂O₃ system was lower than that of pure aluminium oxide. However, the presence of La₂O₃ in aluminium oxide increased the thermostability of these sites in the mixed system.     

Phase states in the Bi4Ti3O12-BiFeO3 section in the Bi2O3-TiO2-Fe2O3 system

Specific features of the thermal behavior of Bi _{m + 1}Fe _m−3Ti₃O_{3m + 3} layered perovskite-like compounds (where m takes integer and some fractional values between 3 and 9) were considered, and the temperature limits of stability of these compounds were determined. The phase diagram of the Bi₄Ti₃O₁₂-BiFeO₃ section through the Bi₂O₃-TiO₂-Fe₂O₃ system was constructed.     

Phase formation, crystal chemistry, and properties in the system Bi2O3-Fe2O3-Nb2O5

Subsolidus phase relations have been determined for the Bi₂O₃-Fe₂O₃-Nb₂O₅ system in air (900-1075 °C). Three new ternary phases were observed—Bi₃Fe_0.5Nb_1.5O₉ with an Aurivillius-type structure, and two phases with approximate stoichiometries Bi₁₇Fe₂Nb₃₁O₁₀₆ and Bi₁₇Fe₃Nb₃₀O₁₀₅ that appear to be structurally related to Bi₈Nb₁₈O₅₇. The fourth ternary phase found in this system is pyrochlore (A₂B₂O₆O′), which forms an extensive solid solution region at Bi-deficient stoichiometries (relative to Bi₂FeNbO₇) suggesting that ≈4-15% of the A-sites are occupied by Fe³⁺. X-ray powder diffraction data confirmed that all Bi-Fe-Nb-O pyrochlores form with positional displacements, as found for analogous pyrochlores with Zn, Mn, or Co instead of Fe. A structural refinement of the pyrochlore 0.4400:0.2700:0.2900 Bi₂O₃:Fe₂O₃:Nb₂O₅ using neutron powder diffraction data is reported with the A cations displaced (0.43 Å) to 96g sites and O′ displaced (0.29 Å) to 32e sites (Bi_1.721Fe_0.190(Fe_0.866Nb_1.134)O₇, Fd3¯m (#227), ). This displacive model is somewhat different from that reported for Bi_1.5Zn_0.92Nb_1.5O_6.92, which exhibits twice the concentration of small B-type cations on the A-sites as the Fe system. Bi-Fe-Nb-O pyrochlores exhibited overall paramagnetic behavior with large negative Curie-Weiss temperature intercepts, slight superparamagnetic effects, and depressed observed moments compared to high-spin, spin-only values. The single-phase pyrochlore with composition Bi_1.657Fe_1.092Nb_1.150O₇ exhibited low-temperature dielectric relaxation similar to that observed for Bi_1.5Zn_0.92Nb_1.5O_6.92; at 1 MHz and 200 K the relative permittivity was 125, and above 350 K conductive effects were observed.     

Dilatometric studies of Y2W3O12 with added Al2O3

Y₂W₃O₁₂ exhibits negative thermal expansion along the three crystallographic directions due to the transverse thermal vibrations perpendicular to the Y-O-W linkage. It is highly hygroscopic and forms a trihydrate structure at room temperature. Dilatometric studies of Y₂W₃O₁₂ show large thermal expansion hysteresis due to large grain size and a large initial positive thermal expansion due to the removal of water molecules. Al₂O₃ has been added to Y₂W₃O₁₂ upto 10 wt% in an attempt to overcome the hygroscopicity and reduce the particle size and thereby the thermal expansion hysteresis. Thermo gravimetric, dilatometric and electron microscopic studies are presented to support these observations. Dedicated to Professor C N R Rao on his 70th birthday     

Catalytic activity of the Al2O3?Cr2O3?Fe2O3 system, I. Physico-chemical properties

The physico-chemical properties of a catalyst containing 90% Al₂O₃, 9% Cr₂O₃ and 1% Fe₂O₃ have been studied. Coexistence of acidic and basic (ionic) sites as well as electron acceptor radical centers have been found.

---

- : 90% Al₂O₃, 9% Cr₂O₃ 1% Fe₂O₃. , () , - .

     

The Ternary System Li2O-Al2O3-B2O3: Compounds and Phase Relations

The ternary system Li₂O-Al₂O₃-B₂O₃ is reinvestigated with solid-state reaction and X-ray powder diffraction technique to clarify some long-standing uncertainties. The phase relations are constructed based on the phase identifications of 51 ternary samples. Six ternary compounds, Li₂AlB₅O₁₀, LiAlB₂O₅, Li₃AlB₂O₆, Li₂AlBO₄, LiAl₇B₄O₁₇ and a compound with a composition close to 0.66Li₂O·0.06Al₂O₃·0.28B₂O₃, are observed or confirmed in this system, and the thermal stability of these ternary compounds is also discussed on the basis of DTA experimental results.     

添加Y2O3的ZrO2—Al2O3复相陶瓷力学性能的研究

采用工业ZrO2, Al2O3原料, 以Y2O3作为稳定剂, 通过适当的工艺制备出ZrO2-Al2O3复相陶瓷. 研究结果表明, Y2O3添加量为3.5%(摩尔分数)的ZrO2基陶瓷中加入Al2O3可有效地抑制ZrO2晶粒的生长, 有利于使ZrO2晶粒以亚稳四方相存在, 从而提高材料的强度与断裂韧性. Al2O3含量为20%(质量分数)时, 复相陶瓷的抗弯强度、断裂韧性分别为676.7和10 MPa*m1/2, 其值接近湿化学法制备的复相陶瓷的力学性能. 相变增韧与颗粒弥散增韧作用相互叠加提高了复相陶瓷材料的力学性能.     

Sulfurization of Pt/Al2O3?Cl catalysts. IV. Adsorption sites of H2S on Al2O3, Al2O3?Cl and Pt/Al2O3?Cl

Chemisorption of H₂S on Al₂O₃, Al₂O₃–Cl and Pt/Al₂O₃–Cl has been studied by gravimetry and IR spectroscopy. The influence of the amount of Cl on the H₂S adsorption equilibrium value and the nature of the adsorption sites at low and high coverages are discussed.

---

H₂S Al₂O₃, Al₂O₃–Cl Pt/Al₂O₃–Cl . Cl H₂S, .

     

TPR studies on steam reforming of 2-propanol on Rh/Al2O3, Ru/Al2O3 and Pd/Al2O3

Reaction pathways for steam reforming of 2-propanol (isopropyl alcohol, IPA) on Rh/Al₂O₃, Ru/Al₂O₃ and Pd/Al₂O₃ have been studied by temperature-programmed reactions (TPRs) of IPA and acetone in the presence of steam. The results of TPRs suggest that that of IPA on Rh/Al₂O₃ and Ru/Al₂O₃ proceeds via acetone, while the steam reforming of IPA on Pd/Al₂O₃ takes place via propene from acetone. This revised version was published online in August 2006 with corrections to the Cover Date.     

Sulfuration of Pt/Al2O3, Pt?Re/Al2O3 and Pt?Ir/Al2O3 catalysts

Three reforming catalysts Pt/Al₂O₃, Pt–Ir/Al₂O₃ and Pt–Re/Al₂O₃ have been sulfurated by H₂S and tested by their activities in benzene hydrogenation. By treatment at 500°C under hydrogen flow only a part of the initial activity of the non-sulfurated catalyst is retained. So only a part of the adsorbed sulfur is easily removed in these conditions. The remaining sulfur for each of the catalysts (Pt/Al₂O₃, Pt–Ir/Al₂O₃ and Pt–Re/Al₂O₃) gives the same atomic ratio of 0.5 sulfur atom per accessible metallic atom.

---

Pt/Al₂O₃, Pt–Ir/Al₂O₃ Pt–Pe/Al₂O₃ . 500°C H₂ . . ., . (Pt/Al₂O₃, Pt–Ir/Al₂O₃ Pt–Pe/Al₂O₃) 0,5.

     

Eu3+-Tb3+共掺杂SiO2-B2O3-Na2O-Y2O3-P2O5玻璃陶瓷的制备与发光性能

采用高温熔融法制备Eu3+?Tb3+共掺杂SiO2?B2O3?Na2O?Y2O3?P2O5前驱体玻璃。对前驱体玻璃粉末进行差示扫描量热(DSC)分析,确定玻璃陶瓷样品的热处理温度。前驱体玻璃热处理后,采用X射线衍射(XRD)和扫描电镜(SEM)分析可知前驱体玻璃中有Na3.6Y1.8(PO4)3晶粒析出。利用荧光光谱对玻璃陶瓷样品的发光性能进行表征,同时分析了Tb3+离子的荧光衰减曲线,确定Eu3+、Tb3+离子的发光机理以及能量传递过程。通过对Eu3+?Tb3+共掺杂玻璃陶瓷样品的发射光谱采集并用色坐标软件和色温计算程序,获得玻璃陶瓷样品的色坐标和相关色温。     

The characterization of Ba3Re2O9 and Sr3Re2O9

The compounds Ba₃Re₂O₉ and Sr₃Re₂O₉ were prepared by the solid state reaction of the corresponding alkaline-earth oxide with ReO₃ at 750 to 900°C in sealed, evacuated, fused silica tubes. The two compounds are isostructural, having the nine-layer ABO₃ structure with vacant central octahedra. The unit cell parameters are given. The magnetic susceptibility for Ba₃Re₂O₉ indicates Curie-Weiss behavior with a Re⁶⁺ moment having localized electrons. The magnetic data for Sr₃Re₂O₉ suggest delocalized electron behavior from its temperature-independent susceptibility. Both compounds appear to have semiconducting properties, but the strontium analog is a better conductor. Both compounds are unstable when heated in air above 400°C. They are readily decomposed by chemical oxidizing agents.