New molecular topologies by fourfold metathesis reactions within a hydrogen-bonded calix[4]arene dimer

A calix[4]arene tetrapentyl ether in the cone conformation substituted at its wide rim by four m-(omega-octenyloxy)phenyl urea groups forms hydrogen-bonded dimeric capsules in dichloromethane/benzene (95:5). Metathesis reaction with Grubbs' catalyst under high-dilution conditions (1.1 x 10(-4) M) followed by hydrogenation leads to a covalent connection of all the urea groups within a dimer. Three topologically different products may be expected in such a reaction: a bis[2]catenane, a doubly bridged monocatenane and a tetrabridged capsule. All three possible reaction products could be isolated in an overall yield up to 60 % for the separated and purified compounds. Their identification was based on the NMR patterns which reflect the characteristic symmetry properties of the isomeric products especially in the region of the hydrogen-bonded NH protons and were further confirmed by MALDI-TOF mass spectra. Further structural support for the bis[2]catenane comes from a single-crystal X-ray structure, although severe disorder prevents the localization of all atoms in the aliphatic chains connecting the two calix[4]arenes. Kinetic studies for the guest release/exchange (cyclohexane against the solvent [D(6)]benzene) do not show remarkable differences between the starting dimer and the additionally linked dimers, while the mobility of an included tetraethylammonium cation is obviously more restricted.     

Synthesis of Flavin–Calix[4]arene Conjugate Derivatives

The synthesis of two new flavin substituted calix[4]arene derivatives, 9 and 10 , is described. The first flavin substituted calix[4]arene derivative 9 was synthesized by the reaction of 3‐methylalloxazine ( 5 ) with 25,27‐bis(3‐bromopropoxy)‐26,28‐dihydroxy‐5,11,17,23‐tetra(tert‐butyl)calix[4]arene ( 4 ) in high yield (92%). The other derivative 10 was prepared from 3‐methylalloxazine‐1‐acetic acid ( 7 ) and 25,27‐bis(3‐cyanopropoxy)calix[4]arene ( 3 ). All new compounds were characterized by a combination of FT‐IR and ¹H‐NMR spectroscopy, and elemental‐analysis techniques.     

Calix[4]arene-based bis[2]catenanes: synthesis and chiral resolution

The exclusive formation of hydrogen-bonded dimers between tetraaryl and tetratosylurea calix[4]arenes has been used to prepare a series of ten "bisloop" tetraurea calix[4]arenes 3, in which adjacent phenylurea groups are covalently linked through alpha,omega-dioxyalkane chains. This dimerization with tetratosylurea 2 as template preorganizes the alkenyl residues of tetra(m-alkenyloxyphenyl) ureas 1 and enables their selective connection in high yield (up to 95 %) by olefin metathesis followed by hydrogenation. The "bisloop" calixarenes 3 also exclusively form heterodimers with 1. Thus, in a separated metathesis/hydrogenation sequence, a series of 14 cyclic bis[2]catenanes 4, in which two calix[4]arenes are connected through their wide rims by two pairs of interlocked rings (total size 29 to 41 atoms), were prepared in yields of up to 97 %. Optical resolution of these chiral bis[2]catenanes was studied by HPLC on chiral stationary phases. The single-crystal X-ray structure of one example (4(P,10)) confirmed the interlocking rings and revealed that the hydrogen-bonded dimeric capsule of the calix[4]arene can be "completely" opened.     

Fourfold tetraurea calix[4]arenes--potential cores for the formation of self-assembled dendrimers

Wide rim tetraurea calix[4]arenes monofunctionalized at the narrow rim by COOH or NH2 have been synthesized in five steps from t-butylcalix[4]arene tripropylether. Their covalent linkage via the narrow rim to a central calix[4]arene fixed in the 1,3-alternate conformation led to pentacalix[4]arenes 9 bearing four tetraurea derivatives in the cone conformation in a flexible tetrahedral arrangement. Their self-assembly via the formation of hydrogen bonded dimeric capsules has been studied under different conditions. A fourfold heterodimerisation of tetrakis-tetraurea derivatives of type 9 with tetratosylurea 10 has been confirmed by 1H NMR-spectroscopy and dynamic light scattering.     

Enhanced thermodynamic and kinetic stability of calix[4]arene dimers locked in the cone conformation

Wide rim tetraurea derivatives (2a,b) have been prepared from a calix[4]arene rigidified in the cone conformation by two diethyleneglycol ether bridges between adjacent oxygens. In comparison to the analogous tetraurea derivatives (3a,b) of a tetrapentoxy calix[4]arene, 2a,b show an increased thermodynamic stability in mixtures of CDCl(3) and DMSO-d(6). Their kinetic stability as expressed by the rate of guest exchange (benzene or cyclohexane against the solvent benzene-d(6)) is also strongly increased by factors of 30-38. Noticeable differences for the inclusion of selected guests are found.     

Rigidified calixarenes bearing four carbamoylmethylphosphineoxide or carbamoylmethylphosphoryl functions at the wide rim

Conformationally rigidified tetraCMPO derivatives have been prepared from calix[4]arene bis(crown ether) 4a in which adjacent oxygens are bridged at the narrow rim by two diethylene glycol links. Acylation of the tetraamine 4c with the CMPO-active ester 5b gave the tetraphosphine oxide 6a, while the tetraphosphinate 6b and the tetraphosphonate 6c were obtained by Arbuzov reaction of tetrabromoacetamido derivative 7 with PhP(OEt)2 or P(OEt)3. The extraction ability of these CMPO derivatives was checked for selected lanthanides and actinides and compared with the analogous compounds 1b, 10b and 10d derived from calix[4]arene tetrapentyl ether. All rigidified bis(crown ether) ligands are more effective extractants than their pentyl ether counterparts and require only 1/10 of the concentration (cL= 10 4M) to obtain the same distribution coefficients, while with CMPO itself a 2,000-fold concentration is necessary. This could be a consequence of a better preorganisation of the ligating functions owing to the rigidity which on the other hand did not change the observed selectivity for americium (DAm/DEu=9-19) and for light lanthanides over heavy ones. NMR relaxivity titration curves show that the complex of Gd3+ with ligand 6a is highly oligomerised in anhydrous acetonitrile over a large range of ligand:metal concentration ratios. Nuclear magnetic relaxation dispersion (NMRD) profiles also showed that large oligomers were formed, and their mean tumbling times were deduced from the Solomon-Bloembergen-Morgan equations. The NMR spectra of dia- and paramagnetic lanthanide complexes with 6a agreed with the presence of two conformers with an elongated calix[4]arene skeleton in which the distances between opposite methylene groups are different. Contrary to what was observed with ligand 2a, the addition of nitrate ions does not labilize the metal complexes, presumably because of the rigidification effect of the ether bridges. Single-crystal X-ray structures were obtained for the active ester 5b and for diphenylphosphorylacetic acid 5a.     

含酰胺和席夫碱单元的杯[4]芳烃衍生物的合成与配合性能

杯[4]-1,3-二乙酸乙酯衍生物1与水合肼反应生成杯[4]芳烃酰肼衍生物2, 然后进一步与相应的芳醛反应, 高产率地合成了三个新型的含酰胺和席夫碱单元的杯[4]芳烃衍生物3a～3c和一例新型杯[4]冠醚4. 阳离子萃取实验表明新型杯芳烃衍生物比只含有酰胺基或席夫碱基的杯芳烃衍生物有更强的软金属离子配合性能, 杯[4]冠醚4还对Ag^＋有较好的选择性萃取能力.     

A [2]catenane containing an upper-rim functionalized calix[4]arene for anion recognition

A novel [2]catenane is synthesized in good yield from an upper-rim functionalized calix[4]arene macrobicycle and a nitro-substituted isophthalamide threading component in the presence of a chloride anion template via a ring-closing metathesis (RCM) reaction. After halide anion template removal the resulting catenane host exhibits a high degree of selectivity for chloride in competitive organic solvent mixtures.     

Synthesis of Macrocyclic Lactones Building on Double Calix[4]arenes

Naturalmacrocycliclactonesandlactamsastheionophoreshaveabsorbedextensiveinterestsbecauseoftheirveryhighselectiverecognitionforalkalimetals.rorexample,nactinslandvalinomycin'havethehighestselectivityforpotassiumamongalltheionopohores.Artificialmacrocycliclactonesalsoshowedselectivityforcanons,althoughthebindingstrengthwaslowerthanthatofcommoncrownethers3.Calixareneswereaveryimportantkindofartificialreceptors,whosederivativeshaveshowedthehighestselectivityforNa ,K andCs amongthesynthesizedmacro…     

Self-assembling, patterning and SPR imaging of a 1,3 alternate bis(dipyridyl)calix[4]arene derivative-Cu2+ complex immobilized on to Au(111) surfaces

The electrochemically switchable Cu(2+) complex of a 1,3 alternate bis(dipyridyl)calix[4]arene derivative forms self-assembled monolayers on Au(111) surfaces. The receptor is patterned on the surface by using microcontact printing procedures and the resulting surface is imaged via SPR.     

Reversible cyanovinylcarbazole-based polymer gel via photo-cross-linking reaction

A polymeric gel was prepared from a bis(3-cyanovinylcarbazole)-based derivative and a thymine-bearing calix[4]arene derivative via photo-cross-linking between 3-cyanovinylcarbazole and thymine groups by irradiation with 365 nm UV light, a novel and facile method to obtain a soft material. Values for storage and loss moduli of the bis(3-cyanovinylcarbazole)-based derivative and the thymine-bearing calix[4]arene derivative gradually increased during photoirradiation. This gel was transformed back to the solution state by decomposition of the polymer network to the monomers via irradiation with 312 nm UV light.     

Synthesis of p‐tert‐Butyl‐calix[6] ‐biscrown‐3 via Intramolecular Ring‐closure of 1,4‐Bis (2‐(2‐chloroethoxy) ethoxy) ‐p‐tert‐butyl‐calix[6]arene

With a variation in reaction conditions, 1, 4‐bis (2‐(2‐chloroethoxy)ethoxy)‐calix[6]arene (3) and l,3,5‐tris(2‐(2‐chloroethoxy) ethoxy)‐calix [6] arene (4) or 4 and 4‐chloroethoxyethoxy‐calix[6]crown‐3 (5) were selectively synthesized from p‐tert‐butyl‐calix [6] arene and 2‐(2‐chloroethoxy)ethyltosylate. l,3–4,6‐p‐tert‐butylcalix[6]‐bis‐crown‐3 (6) with (u,u,u,d,d,d) conformation and 1,3–4,5‐p‐tert‐butylcalix[6]‐biscrown‐3 (7) with self‐anchored (u,u, u, u, u, d) conformation were synthesized through an intramolecularly ring‐closing condensation of 1, 4‐bis (2‐(2‐chloroethoxy)ethoxy)‐p‐tert‐butyl‐calix[6]arene (3) in 25% and 15% yield, respectively. Using 5 instead of 3, only 7 was obtained in 65% high yield. 6 and 7 show different complexation properties toward alkali metal and ammonium ions.     

Conformational features and recognition properties of a conformationally blocked calix[7]arene derivative

The shaping of a calix[7]arene macrocycle into cone-like structure 3, through exhaustive alkylation of doubly bridged calix[7]arene derivative 2 with bulky groups, has been investigated. Conformational details about the structure adopted by calix[7]arene derivative 3 in solution have been obtained by using chemical shift surface maps, as previously reported by our group. Thus, chemical shift contour plots indicated that 3 adopted a cone-shaped structure in solution analogous to that adopted by the known p-tert-butylcalix[7]arene heptacarboxylic acid derivative 4. Interestingly, the X-ray structure of derivative 3 showed a high degree of similarity to the theoretical structure, which confirmed the validity of the contour plots method. The preorganized calix[7]arene host 3 showed interesting recognition abilities toward both organic and alkali cations. In fact, an unprecedented endo-cavity complexation of linear and branched alkyl ammonium cations with a larger calix[7]arene host was evidenced. A comparable affinity for branched tBuNH(3)(+) and linear nBuNH(3)(+) guests was observed.     

Exclusive self-assembly of a polar dimeric capsule between tetraurea calix[4]pyrrole and tetraurea calix[4]arene

The exclusive self-sorting observed in the self-assembly process between tetraurea benzyl calix[4]pyrroles and tetraurea tolyl calix[4]arene to afford unprecedented hybrid dimeric capsules with polar interiors is described. The coencapsulation of a solvent molecule with an organic guest yields four particle aggregates in which the guests are confined and restricted into single hemispheres due to the polar requirements of the internal cavity.     

杯[4]芳烃黄原酸酯衍生物的合成与阳离子萃取性能

以二氧六环作溶剂, 杯[4]芳烃二甲氧基二羟乙氧基衍生物2与氢氧化钾、二硫化碳作用合成了杯芳烃黄原酸盐衍生物3, 并进一步与碘甲烷或氯化苄反应首次合成了含黄原酸酯基的杯芳烃衍生物4a和4b. 阳离子萃取试验表明该新型杯芳烃衍生物比单硫杂杯芳烃衍生物具有更好的过渡金属离子萃取性能.     

Anion-templated calix[4]arene-based pseudorotaxanes and catenanes

We present the rational design and anion-binding properties of the first anion-templated pseudorotaxanes and catenanes in which the "wheel" component is provided by a calix[4]arene macrobicyclic unit. The designs and syntheses of two new calix[4]arene macrobicycles, 2 and 3, are presented, and the abilities of these new species both to bind anions and to undergo anion-dependent pseudorotaxane formation are demonstrated. Furthermore, it is shown that performing ring-closing metathesis reactions on some of these pseudorotaxane assemblies gives novel catenane species 14 and 15, in which the yield of interlocked molecule obtained is critically dependent on the presence of a suitable anion template, namely, chloride. Exchange of the chloride anion in catenane 14 a for hexafluorophosphate gives catenane 14 d, which contains a unique anion-binding domain defined by the permanently interlocked hydrogen-bond-donating calix[4]arene macrobicycle and pyridinium macrocycle fragments. The anion-binding properties of this domain are presented, and shown to differ from non-interlocked components.     

新型杯[4]芳烃衍生物的合成及其氨基酸萃取性能

杯[4]-1,3-二乙酸乙酯衍生物(1)与水合肼反应生成杯[4]芳烃酰肼衍生物(2),化合物(2)与异硫氰酸苯酯反应得到含酰胺和硫脲单元的新型杯[4]芳烃衍生物(3).总产率达70%.系列氨基酸萃取实验表明化合物(3)对异亮氨酸有较好的选择性萃取能力.     

含酰胺和硫脲单元的杯[4]芳烃衍生物的合成

杯[4]芳烃．1,3-二乙酸乙酯衍生物与水合肼反应生成杯[4]芳烃酰肼衍生物(2),2与异硫氰酸苯酯反应得到新型含酰胺和硫脲单元的杯[4]芳烃衍生物,总产率85％。     

邻甲氧基羰基苄氧基取代杯[4]芳烃衍生物的合成及其性？…

杯芳烃是继冠醚、环糊精之后的第三代主体分子 [1] .据文献 [2 ,3]报道 ,在杯 [4]芳烃下沿酚氧原子上连接乙酸酯得到的四取代衍生物对 Na+ 有很高的选择性 ,核磁与晶体结构研究均证实这是由于羧酸酯的羰基和酚氧基参与了对 Na+ 的配位 ,而且配位基团所形成的包络空间大小与钠离子相匹配 .一般认为 ,随着包络空间改变 ,对金属离子的识别作用会有所变化[4] .但目前对这方面的工作并没有给予更多的重视 .我们发现 ,用 2 -溴甲基苯甲酸甲酯与杯 [4 ]芳烃反应 ,得到了一种新的四取代杯 [4]芳烃衍生物 2 ,萃取研究结果表明 ,该化合物对钾离子有较…     

Synthesis and characterization of diametrically substituted tetra-O-n-butylcalix[4]arene ligands and their chelated complexes of titanium,molybdenum, and palladium

The ligation properties of three new upper-rim-substituted calix[4]arene ligands, 5,17-bis(hydroxymethyl)-tetra-n-butoxycalix[4]arene ((HOCH2)2-nBu4Clx, 7), 5,17-bis((diphenylphosphinito)methoxy)-tetra-n-butoxycalix[4]arene ((PPh2OCH2)2-nBu4Clx, 8), and 5,17-bis((diphenylphosphino)methyl)-tetra-n-butoxycalix[4]arene ((PPh2CH2)2-nBu4Clx, 10) are reported herein. The newly prepared compounds differ from previously reported diametrically substituted calix[4]arene derivatives in that the lower-rim substituent was n-butyl. The presence of this lower-rim substituent did not reduce the inherent crystallinity of these complexes as purification of all materials occurred via simple crystallizations. The key precursor for the syntheses of 8 and 10 was 7, acquisition of which occurred in six steps starting from tetra-tert-butylcalix[4]arene, 1. Calix[4]arene derivatives include, tetra-n-butoxycalix[4]arene (nBu4Clx, 3), 5,11,17,23-tetrabromo-tetra-n-butoxycalix[4]arene (Br4-nBu4Clx, 4), 5,17-dibromo-tetra-n-butoxycalix[4]arene (Br2-nBu4Clx, 5), 5,17-bis(formyl)-tetra-n-butoxycalix[4]arene ((CHO)2-nBu4Clx, 6), and 5,17-bis(chloromethyl)-tetra-n-butoxycalix[4]arene ((ClCH2)2-nBu4Clx, 9), all of which were synthesized using modifications of existing procedures. Characterization of all compounds occurred, when possible, using 1H, 13C, and 31P NMR, elemental analyses, FAB-MS, ESI-MS, FT-IR, and X-ray crystallography. The solid-state structures of all calix[4]arene intermediates and ligands showed that the annulus adopted the pinched-cone conformation in which the average C(5)...C(17) intraannular separation was 4.5 +/- 0.4 A. Reaction of 7 with CpTiMe3 yielded the cis-chelate, CpTi(Me)[(OCH2)2-nBu4Clx] (11), quantitatively. Data obtained using ESI-MS (positive-ion mode) confirmed the monomer formulation showed above, and 1H NMR spectra provided sufficient information to deduce the nature of the Ti coordination sphere. Reaction of 8 with cis-Cl2Pd(NCPh)2 in refluxing benzene afforded cis-Cl2Pd[(PPh2OCH2)2-nBu4Clx] (12) in good yields. The monomeric identity of this compound was verified by both X-ray crystallography and positive-ion ESI-MS. The cis-bidentate calix[4]arene ligand did not undergo any noticeable contortion upon chelation of the PdCl2 fragment. Acid-promoted decomposition of 12 occurred in the presence of adventitious HCl and gaseous HCl, and the products of this decomposition were 9 and [mu2-ClPd(PPh2OH)(PPh2O)]2. In addition, chelates of 8 that contained Mo(CO)3L (L = NCMe (14a), NCEt (14b), and CO (14c)) showed that the mode of coordination was relatively insensitive to the identity of the metal. X-ray crystallography afforded views of the solid-state structures of 14b,c and, like 12, showed that the Mo(CO)3L fragment resided above the pinched-cone of the calix[4]arene. 1H NMR revealed that C-H/pi interactions existed between L (14a,b) and a phenyl ring of the coordinated phosphinite. Finally, the bis(diphenylphosphine)calix[4]arene ligand (10) readily coordinated the Mo(CO)3L species, but the reaction did not go to completion, as evidenced by 1H NMR, even after a 5 day reaction time. Data suggest that the product is similar to that observed for 12 and 14, but the incomplete reaction complicated attempts to obtain pure material and prohibited definitive assignment of the coordination array.