Graft Copolymerization of Methyl Methacrylate onto Poly(Ethylene Terephthalate) Fibers Using Benzoyl Peroxide

Abstract

The graft copolymerization of methyl methacrylate onto poly(ethylene terephthalate) fibers has been studied using benzoyl peroxide as initiator. The grafting reactions were carried out within the 70 to 90°C temperature range, and the variations of graft yield with monomer and initiator concentrations were also investigated. The overall activation energy for grafting was calculated as 34.1 kcal/mol. The results of dyeability with the disperse dye suggested that diffusion into the fiber structure was moderately difficult when the graft yield reached 14?15%. The maximum graft yield was obtained at a benzoyl peroxide concentration of 4.00 × 10^?3 M. The decomposition temperature values obtained from thermogravimetric analysis show that the thermal stability of poly(ethylene terephthalate) fibers decreased as a result of grafting. Further, such change in the properties of methyl methacrylate grafted fibers as density, diameter, and moisture regain were also determined.     

Preparation of Poly(ethylene terephthalate)‐g‐Methacrylamide Copolymers Initiated by Azobisizobutyronitrile: Characterization and Investigation of Some Properties

Poly(ethylene terephthalate)‐g‐methacrylamide (PET‐g‐MAAm) copolymer was prepared by graft copolymerization in organic solvent/water mixtures by using azobisizobutyronitrile (AIBN) as an initiator. The highest graft yield was obtained in 20/80 (v/v) acetonitrile/water mixture as 30.0%. The effect of polymerization parameters such as the ratio of solvent/water mixture, concentrations of initiator and monomer, temperature and time on the graft yield was studied. The moisture regain of the PET fiber increased with grafting from 0.42% to 3.01%. Thermogravimetric data showed that the thermal stability of PET fibers decreased with grafting and 85% of total weight of 29.7% grafted fiber was lost at 500°C. On the other hand, fiber density decreased with increasing graft yield. At SEM micrographs, the layers oriented in the direction of fiber length were observed on the surface of PET fiber as a result of grafting.     

Plasma Induced Graft Polymerization of Three Hydrophilic Monomers on Nylon 6,6 Fabrics for Enhancing Antistatic Property

In this study, three hydrophilic monomers; 2-acrylamido-2-methyl-1-propanesulfonic acid, 2-hydroxyethyl methacrylate, diallyldimethylammonium chloride (DADMAC) were selected and their performance as an antistatic finish on nylon 6,6 fabrics was investigated. A non-thermal, high density atmospheric pressure plasma was used to graft polymerize the monomers on nylon 6,6 fabrics. Fabrics were first treated with solutions of monomer in water, air dried and then treated with helium plasma to graft polymerize the monomer on the fiber surface. Surface resistivity values were measured before and after soxhlet extraction with water. Results showed that the DADMAC monomer provided better antistatic properties to fabrics. Further studies with DADMAC monomer were made; effects of plasma post exposure time, plasma pre-exposure time, plasma power, concentration of the monomer and existence of a crosslinker were investigated. Higher plasma power, higher concentration of the monomer and longer post exposure times all gave better antistatic properties to the nylon 6,6 fabrics. Acid dye staining, UV–Vis and FT-IR measurements were conducted and results confirmed a grafted poly-DADMAC layer on the fabric surface.     

Graft copolymerization of itaconic acid-methacrylamide comonomers onto poly(ethylene terephthalate) fibers

The graft copolymerization of itaconic acid-methacrylamide (IA-MAAm) comonomers was carried out using benzoyl peroxide as initiator onto poly(ethylene terephthalate) (PET) fibers in an aqueous medium. The grafted fibers were characterized by FTIR, TGA, DSC and SEM analysis. Effect of various parameters on graft yield such as feed composition, feed and initiator concentration, reaction time and temperature were investigated. The graft yield in the presence of MAAm increased because of the synergistic effect of MAAm comonomer. While, the graft yield alone with the IA onto PET fiber was 2.2%, the use of MAAm as a comonomer increased the amount of IA introduced to the PET fiber up to 13.7%. The reactivity ratios for both monomers were determined by using a Fineman-Ross plot. The grafting rate and saturation graft yield was increased upon increasing the temperature between 65 °C and 85 °C. When the temperature increased further than 85 °C, the saturation graft yield decreased. The graft yield has shown an increase up to an initiator concentration of 1.0 × 10⁻² M and slightly decreased. The grafting increased the dyeability with acidic and basic dyes, and moisture absorption capacity but decreased the thermal stability of the fibers.     

Fabrication of glycosylated surface on polymer membrane by UV-induced graft polymerization for lectin recognition

Increasingly, carbohydrate-protein interactions are viewed as important mechanisms for many biological processes such as blood coagulation, immune response, viral infection, inflammation, embryogenesis, and cellular signal transfer. However, the weak affinity of the interactions and the structural complexity of carbohydrates have hindered efforts to develop a comprehensive understanding of carbohydrate functions. Fortunately, synthetic polyvalent glycoligands give us a chance to reveal the nature of these biological processes. In this work a sugar-containing monomer (alpha-D-allyl glucoside (AG)) was grafted onto polypropylene microporous membrane (PPMM) by UV-induced graft polymerization to generate a glycosylated porous surface for the first time. Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and scanning electron microscopy were employed to confirm the glycosylation. Water contact angle measurement was used to evaluate the hydrophilicity change of the surfaces before and after the graft polymerization of AG. It was found that the grafting density increased reasonably with the increase of AG monomer concentration, and then this increase slowed when the AG concentration exceeded 80 g/L. At the same time a 20-25 min UV irradiation was enough for the grafting polymerization. The photoinitiator concentration also influenced the grafting density obviously, and there was an optimal concentration of the photoinitiator for the grafting process. The water contact angle of the polyAG-tethered membrane surface decreased from 149 degrees to 80 degrees with the increase of grafting density from 0 to 187.76 microg/cm2, which indicated a hydrophilic variation of the membrane surface by the grafting of AG. Results also indicated that the surface-grafted polyAG chains showed weak interaction with Con A when the grafting density was low. However, when the sugar density exceeded 90 microg/cm2, the binding affinity increased dramatically which was the due to the "glycoside cluster effect".     

Graft copolymerization kinetics of acrylic acid onto the poly(ethylene terephthalate) surface by atmospheric pressure plasma inducement

After one atmospheric pressure plasma treatment of poly(ethylene terephthalate) (PET) film, acrylic acid (AAc) in aqueous solution was successfully graft‐copolymerized onto PET films. The effects of reaction time, AAc monomer concentration and reaction temperature on grafting behavior of AAc were systematically studied. Possible reaction kinetics of plasma‐induced graft copolymerization, starting from initial hydroperoxide decomposition, were proposed. Through the Arrhenius analysis about graft copolymerization kinetics of AAc monomers on PET surface, it was revealed that the activation energies of decomposition, propagation and termination were 98.4, 63.5, and 17.5 kJ/mol, respectively. The temperature around 80 °C was favorable not only for the formation of oxide radicals through the thermal decomposition of hydroperoxide on PET surface but also for the extension of graft copolymer chain through direct polymer grafting. Poly(acrylic acid) (PAAc) grains grafted onto PET surfaces possessed relatively uniform size and both PAAc grain size and surface roughness increased with increasing the grafting degree of AAc. The increase of grain size with increasing grafting degree results from the possibility of forming long chain graft copolymers and their shielding of reactive sites. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1594–1601, 2008     

丝素蛋白纤维的接枝聚合Ⅲ．丝素蛋白纤维的接枝聚合染色

本文提出了通过接枝聚合物将丝素蛋白纤维的染色的设想：在染料分子上引入丙烯酰基，然后将其接枝到丝素蛋白纤维表面。将2－羟基－4－丙烯酰氧二苯酮（HAOBP），1－羟基－2－丙烯酰氧蒽醌（HAOAQ）和1，5，8－三羟基－2－丙烯酰氧蒽醌（THAOAQ）等三种染料，分别用无引发剂存在下的接枝聚合法接枝到丝素蛋白纤维表面，使丝素蛋白纤维分别染成了浅黄、浅红和浅紫三种颜色。这样染色了的丝素蛋白纤维在浓酸或浓碱溶液中回流，未发生任何裉色现象，并且其热稳定性和紫外稳定性也得到了显著的改善。力学性能未下降。采用甲基丙烯酸甲酯（MMA）与染料单体共同进行接枝聚合染色，可以提高丝素蛋白纤维的光泽度，并可将接枝整理和染色两道工序合而为一。HAOBP、HAOAQ和THAOAQ在丝素蛋白纤维上的接枝率（mol单体／g丝），具有如下顺序，HAOBP＞HAOAQ＜THAOAQ。该顺序与它们的亲水性顺序恰好相反，这一结果支持了Imoto等人的无引发剂存在下的接枝聚合发生在丝素蛋白纤维的疏水区域的观点。     

Graft Copolymerization of Acrylamide on Swollen poly (Ethylene Terephthalate) Fibers Using Cerium Ammonium Nitrate Initiator

Abstract

In this study the graft copolymerization of acrylamide (AAm) on swollen poly(ethylene terephthalate) (PET) fibers using cerium ammonium nitrate (CeAN) initiator was investigated. Five organic solvents, dimethylsulfoxide (DMSO), morpholine, acetic acid (HAc), n-butanol, and 1,2-dichloroethane (DCE), were used as swelling agents. DMSO was found to be the most suitable swelling agent. Solvent diffusion into the fibers was observed to increase with treatment time and temperature. The optimum graft yield was obtained when fibers were grafted after having been swollen in DMSO for a period of 1 hour at 140°C. Variation of graft yield with polymerization time and temperature, and monomer, initiator, and acid concentrations were investigated. Graft yields were observed to increase initially with polymerization time, then to level off, and were found to increase up to a certain monomer and Ce⁴⁺ concentration, then to decrease slightly. The effect of grafting on such fiber properties as diameter, viscosity, and moisture gain were also investigated.     

Grafting onto Wool. XV. Graft Copolymerization of MA and MM A by Use of Mn(acac)3 as Initiator

Graft copolymerization of acceptor monomers MA and MMA onto Himachali wool fiber in an aqueous medium was studied by using Mn(acac)s as initiator. Nitric acid was found to catalyze the graft copolymerization. Percentage of grafting and percent efficiency have been determined as functions of the concentration of chelate, nitric acid, monomer, time, and temperature, Under optimum conditions, MMA produced a maximum grafting of 82.5% while MA afforded maximum grafting to the extent of 27.5%. Relative reactivities of MA and MMA toward grafting have been compared with those of EA, BA, and VAc reported earlier from this laboratory. Different vinyl monomers were found to follow the following reactivity order toward grafting onto wool fiber in the presence of Mn(acac)₃: MMA > EA > BA > MA > VAc. An attempt has been made to explain the observed reactivity pattern shown by different vinyl monomers in graft copolymerization reactions.     

Graft copolymerizations of gaseous vinyl chloride and vinylidene chloride on preirradiated polypropylene

The graft copolymerizations onto the preirradiated polypropylene fibers of gaseous vinyl chloride and also of gaseous vinylidene chloride were carried out. The fibers were preirradiated with γ-rays from a ⁶⁰Co source at ?78°C. in air to a total dose of 8 X 10⁵ rad, and were thus presumed to contain peroxide radicals which were active in grafting at ordinary temperature. The volume decrease of monomers at constant pressures due to the sorption and the grafting reaction was followed automatically at temperatures ranging from ?10 to 80°C. The net monomer consumption through the grafting process was estimated by subtracting the volume change due to the sorption from the total volume change of monomers. In general, the extent of grafting was lower at the higher grafting temperature and the decrease of the grafting activity of fibers was also accelerated. The grafting was found to increase almost linearly with the logarithm of the reaction time and the logarithm of the radiation of the radiation dose to the fibers. The extent of grafting was also proportional to the vapor pressure of monomer at a given reaction temperature and was supposed to be controlled by the amount of the monomer adsorbed. Raising the irradiation temperature higher than 0°C. brought about a marked decrease in the activity of preirradiated polypropylene. The grafting activity was successfully retained by the polymer for at least a fortnight at ?78°C.     

Surface modification of polyethylene fiber by graft polymerization

To improve the wettability and adhesion, graft polymerization of acrylamide (AAm) and glycidyl methacrylate (GMA) was performed onto the surface of ultra-high modulus polyethylene (UHMPE) fiber pretreated with Ar plasma. Following the plasma treatment and the subsequent exposure to air to introduce peroxides onto the fiber surface, graft polymerization onto the UHMPE fiber was allowed to proceed from the polymer peroxides either in deaerated monomer solution at an elevated temperature (degassing method), or in aerated monomer solution containing riboflavin at 30°C under UV irradiation (photoinduction method). The monomer solution was prepared from water and dioxane for AAm and GMA, respectively. After rigorous removal of homopolymers, surface analysis of the grafted fibers was performed with ATR-FTIR and XPS, which revealed that PAAm and PGMA chains were grafted in the surface region of fibers. The grafting rate of PAAm by the photoinduction method was much higher than that by the degassing method when compared at the same concentration of the AAm solution. The amount of PGMA grafted was greatly affected by UV irradiation time, but depended on plasma treatment time to an insignificant extent if the treatment was carried out for longer than 30 s. Reaction of propylamine with the PGMA-grafted surface resulted in the appearance of a nitrogen peak in the XPS spectrum, suggesting the presence of epoxy groups on the surface of PGMA grafted fiber. © 1994 John Wiley & Sons, Inc.     

一缩二乙醇二甲基丙烯酸酯对真丝接枝的反应性

研究了一缩二乙二醇二甲基丙烯酸酯在空气存在下，用过硫酸钾(KPS)在水液 中对真丝的接枝。对接枝的条件，如单体、引发剂、甲酸(FA)和乳化剂OP的浓度以 及温度和时间对接枝率的影响进行了测试。发现了较佳的接枝条件是：温度 = 80 ℃，时间 = 30 min，[KPS] = 1.85% (owm)，[OP] = 1% (owf)，[FA] = 0.2%。 接枝率的大小可以用单体浓度来调节，接枝活化能是86.94 kJ/mol。     

聚四氟乙烯强酸性阳离子交换纤维的制备研究

采用共辐射引发将苯乙烯接枝到聚四氟乙烯(PTFE)纤维上,然后磺化制备出强酸性和超强酸性离子交换纤维,接枝率随苯乙烯单体浓度和辐射剂量增加而提高,随辐射剂量率的增加而降低,当接枝率为20%左右时,PTFE-co-St-SO3H离子交换纤维的Hammett酸度函数低于-11.99,呈现出超强酸性。     

Electrokinetic and contact angle measurements of grafted carbon fibers

 The grafting method that has successfully been applied to methacrylic acid and liquid crystalline monomers was expanded to prepare amphoteric carbon fiber surfaces using 2-(N,N-dimethylamino)ethyl methacrylate as monomer. The obtained carbon fiber surfaces were characterized by contact angle and ζ-potential measurements. The expected basic behavior was not observed, instead an amphoteric character of the modified carbon fiber surface was found. The fiber surfaces display a basic character in the acidic pH-range, while they are acidic in the alkaline part of the pH-scale. An important influence is derived from the amount of initiator used to graft the monomers onto the fibers. The smaller the initiator concen-tration used during polymerization, the larger the amount of amino functionalities introduced to the carbon fiber surface. The wetting behavior versus water depends on the overall conformation of the immobilized polymer. During immersion into water the polymer acts hydrophobic, while during emersion, a hydrophilic character is observed, probably derived from conformational changes and swelling during the contact angle measure-ments in water. Received: 9 June 1998 Accepted: 13 August 1998     

Grafting Vinyl Monomers onto Nylon 6 Fiber. III. Graft Copolymerization of Vinyl Monomers onto Nylon 6 Fiber in Water Medium in the Presence of Fructose

Nylon 6 fiber was grafted with various vinyl monomers e.g., methyl methacrylate (MMA), ethyl methacrylate (EMA), and n-butyl methacrylate (n-BMA), in water in the presence of fructose using a carbon arc lamp as the source of photoirradiation at 70°C and a liquor ratio of 1:26. The effects of various parameters, e.g., monomer concentration, time of grafting, and fructose concentration on grafting reactions, were studied individually for each monomer. The graft yield is greatly enhanced by increasing the monomer concentration and the time of grafting. However, the optimum fructose concentration is required for maximum grafting efficiency. The accelerating action of photopolymerization by fructose was attributed to the sensitizing action of fructose involving an energy transfer.     

低温等离子体对聚合物多孔膜的亲水化改性

综述了低温等离子体在聚合物多孔膜表面亲水化改性领域的研究与应用进展。在简要介绍等离子体技术的原理、方法的基础上,讨论了Ar、He、O2、N2、CO2、H2O、NH2和SO2等非反应性和反应性气体的等离子体表面处理,烷基醇、烷基胺、烯丙基醇和烯丙基胺等饱和及不饱和单体的等离子体沉积聚合,以及烯类单体的等离子体引发的接枝聚合等等离子体方法,对膜表面和膜孔壁的化学组成和形态结构、膜亲水性的获得及其时效性、膜水通量和蛋白质抗污染性等方面的影响。     

Vapor-phase graft copolymerization of vinyl chloride and vinylidene chloride onto polypropylene fibers by simultaneous irradiation technique

The vapor-phase graft copolymerization of vinyl chloride and vinylidene chloride onto polypropylene fibers was studied by a simultaneous γ-irradiation technique. The weight increase during irradiation due to the grafting in monomers at constant vapor pressure was measured by a sensitive spring balance. The sorption of both monomers onto unirradiated polypropylene fibers was also measured. The graft copolymerization reaction was suppressed with increasing irradiation temperature, and the overall activation energies of grafting were negative in both monomers, ?2.4 kcal/mole for vinyl chloride and ?6.3 kcal/mole for vinylidene chloride. The initial rate of grafting increased linearly with the vapor pressure of monomers. The above dependence was found to parallel the sorption of monomers on polypropylene fibers. The reaction rates were proportional to the 0.9 power of the dose rate in both monomers. The relationship between the grafting and the sorption of monomers was discussed on the basis of kinetics.     

Studies on New Hydrophobically Modified Water-soluble Cellulosic Graft Terpolymers

Hydrophobically modified water-soluble ion-containing cellulosic polymer possessing intra-or intermolecular modes of hydrophobic associations has been recently the object of our research^[1-4]. Based on the preparation of the surface-active monomer, dimethyloctyl (2-methacryloxyethyl)ammonium bromide (DMOA), new cellulosic graft terpolymers (NCGT) have been synthesized by grafting acrylamide (AM) and DMOA onto carboxymethyl cellulose (CMC) using potassium persulfate and dimethylaminoethyl methacrylate as the initiating system, and characterized by FTIR, elementary analysis, titration and GPC. To obtain the optimum reaction conditions, the influence of the feed ratio and addition order of raw materials, the concentration of initiators, temperature and pH on the grafting have been investigated.     

Chemical structure of poly(ethylene terephthalate)–styrene and nylon–styrene graft copolymers prepared by radiation techniques

The graft copolymerizations of styrene onto poly(ethylene terephthalate) (PET) and nylon fibers were carried out by the mutual irradiation and preirradiation methods. True graft copolymers were isolated from the products by extraction and characterized by hydrolysis and osmometry. Among the swelling agents employed, methanol was most effective for increasing the extent of grafting onto PET. In both methods of the grafting, the molecular weight of polystyrene formed in the substrate matrix was higher than one million if no chain-transfer agent was added to the monomer solution. Similar to the case of radiation grafting onto poly(vinyl alcohol) and cellulose, the isolated graft copolymer carried only one branch per copolymer molecule in both cases. Of great interest is the particularly low extent of grafting in the case of PET–styrene. This should be attributed to the low sensitivity of PET to radiation. The grafting site on the mother polymer molecule is discussed on the basis of the solution behavior of the branch polymers separated from the backbone.     

Grafting onto Wool. XXVI. Graft Copolymerization of Vinyl Monomers by Use of Cr(acac)3-TBHP as Initiator

Methyl methacrylate (MMA), methyl acrylate (MA), and ethyl acrylate (EA) have been graft copolymerized onto wool fiber in aqueous medium using the chromium acetylacetonate-tertiary-butyl hydroperoxide (Cr(acac)₃-TBHP) system as initiator. The percentage of grafting has been determined as a function of the concentrations of monomer, chelate, and TBHP, and the time and temperature under optimum conditions. MMA produced a maximum grafting of 119.8%, MA produced a maximum grafting of 56%, while EA afforded maximum grafting to the extent of 41.9%. Different vinyl monomers were found to follow the following reactivity order toward grafting onto wool fiber in the presence of the Cr(acac)₃-TBHP system: MMA > MA > EA.