Length dependence of charge transport in nanoscopic molecular junctions incorporating a series of rigid thiol-terminated norbornylogs

Four tetrathiol-terminated norbornane homologues were synthesized and self-assembled monolayers (SAMs) of these molecules were formed on Au via adsorption from CH2Cl2. SAMs were characterized structurally via spectroscopic ellipsometry (SE), reflection-absorption infrared spectroscopy (RAIRS), Rutherford backscattering spectrometry (RBS), and X-ray photoelectron spectroscopy (XPS). Results of these analyses show that the rigid norbornylogs form monolayers that have a surface coverage slightly lower than that of alkanethiols, and that they exhibit a nonmonotonic dependence of film thickness on molecular length. Nanoscale molecular junctions incorporating these SAMs were formed and characterized electrically using conducting probe atomic force microscopy (CP-AFM). The resistances of these junctions scale exponentially with the contour length of the molecules, with beta = 0.9 A(-1), consistent with a nonresonant tunneling mechanism. Further, the resistance of norbornyl SAMs correlates well with the resistance of alkanedithiol SAMs of similar length, suggesting that the norbornyl molecules form sulfur-metal bonds on both ends of the junction.     

Chemical grafting of biphenyl self-assembled monolayers on ultrananocrystalline diamond

We have investigated the formation of self-assembled monolayers (SAMs) of 4'-nitro-1,1-biphenyl-4-diazonium tetrafluoroborate (NBD) onto ultrananocrystalline diamond (UNCD) thin films. In contrast to the common approach to modify diamond and diamond-like substrates by electrografting, the SAM was formed from the saturated solution of NBD in acetonitrile by pure chemical grafting. Atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), cyclic voltammetry (CV), and near edge X-ray absorption fine structure spectroscopy (NEXAFS) have been used to verify the direct covalent attachment of the 4'-nitro-1,1-biphenyl (NB) SAM on the diamond substrate via stable C-C bonds and to estimate the monolayer packing density. The results confirm the presence of a very stable, homogeneous and dense monolayer. Additionally, the terminal nitro group of the NB SAM can be readily converted into an amino group by X-ray irradiation as well as electrochemistry. This opens the possibility of in situ electrochemical modification as well as the creation of chemical patterns (chemical lithography) in the SAM on UNCD substrates and enables a variety of consecutive chemical functionalization for sensing and molecular electronics applications.     

Alkanethiols on platinum: multicomponent self-assembled monolayers

We have studied the formation of self-assembled monolayers (SAMs) of n-alkanethiols on platinum thin films using X-ray photoelectron spectroscopy (XPS), reflection-absorption infrared spectroscopy (RAIRS), spectroscopic ellipsometry (SE), and contact angle (CA) measurements. Specifically, SAMs of 1-hexanethiol, 1-dodecanethiol, and 1-octadecanethiol were grown on polycrystalline Pt films, and the effects of Pt surface preparation, deposition conditions, and solvent treatments on the initial quality and stability of the monolayer in air were investigated. The SAMs prepared under ambient conditions on piranha-cleaned and UV/ozone-cleaned substrates were compared to monolayers formed on template-stripped Pt in an inert atmosphere. We found that alkanethiols deposited from 1 mM ethanolic solutions on piranha-cleaned Pt formed densely packed monolayers in which alkyl chains were oriented close to the surface normal. Stored in the laboratory ambient, these monolayers were unchanged over about 1 week but were largely oxidized in about 1 month. No evidence was found of molecules being weakly bound within the monolayer or having undergone C-S bond scission; however, three distinct sulfur states were observed for all samples in the XPS of the S 2p region. The lowest- and highest-binding-energy components are assigned to alkylthiolate and partially oxidized alkylthiolate species, respectively. The remaining S 2p component (approximately one-third of the sulfur layer), intermediate in binding energy between the other two components, is attributed to a chemisorbed species with a S binding configuration distinct from the majority alkylthiolate: for example, S bound to Pt bound to O, S with a different Pt coordination number, or S in an adsorbed disulfide.     

Characterization of self-assembled monolayers of thiols on Au(111)

Self-assembled monolayers (SAMs) of n-butanethiol, n-dodecanethiol and their equimolar mixture on Au(111) were prepared and characterized by ellipsometry, contact angle measurement, scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). Results revealed that these SAMs are oriented ultrathin films with the thickness of nanometer scale, and the SAMs were influenced by the molecular chain length, the lattice orientation and cleanliness of the substrates. The surface of the longer chain SAM is hydrophobic. The thicknesses of three SAMs of n-butanethiol, n-dodecanethiol and their mixture revealed by ellipsometry and XPS are about 0.59 - 0.67nm, 1.60- 1.69 nm and 1.23 - 1.32nm, respectively. AFM images further demonstrated that the SAM formed by the mixture has some microdomains with two different thicknesses.     

Enhanced stability of short- and long-chain diselenide self-assembled monolayers on gold probed by electrochemistry, spectroscopy, and microscopy

Well-ordered, compact, self-assembled monolayers (SAMs) of hexyl and dodecyl diselenides have been formed on oriented (111) gold surfaces. Monolayer formation has been effected by adsorption from neat diselenides as well as millimolar solutions of diselenides in alcohol. The monolayer formation is confirmed using electrochemical quartz crystal microbalance studies. The stability and permeability of the monolayers at various temperatures have been probed using reflection absorption infrared spectroscopy (RAIRS) and electrochemistry. The RAIRS studies in the dry state show the formation of highly ordered, compact structures when adsorbed from neat compounds compared to the monolayers adsorbed in the presence of alcohol. The monolayers adsorbed from neat diselenide are quite stable as a function of temperature irrespective of the chain length. The electrochemical studies based on the blocking behavior of the monolayers toward electron transfer between a diffusing species and the electrode surface reflect the stability and the compactness of the structure. The results point out that the presence of solvent molecules during the SAM formation hinders the organization of the monolayer structure, especially in the case of short-chain diselenide monolayers.     

Octylgermane on gold: synthesis, oxidation, and pattern formation

Chemisorbed monolayers of octylgermane (C8H17GeH3) on gold have been formed by vapor deposition in ultrahigh vacuum. The monolayer has been characterized by X-ray photoelectron and reflection absorption infrared spectroscopies (XPS and RAIRS) and scanning tunneling microscopy (STM). XPS data indicate the monolayer can be oxidized by exposure to ozone. STM images exhibit a complex pattern which can be modeled as strain-mediated spinodal decomposition.     

Preferential adsorption of amino-terminated silane in a binary mixed self-assembled monolayer

The composition and structure of a binary mixed self-assembled monolayer (SAM) of 3-aminopropyltriethoxysilane (APS, NH(2)(CH(2))(3)Si(OCH(2)CH(3))(3)) and octadecyltrimethoxysilane (ODS, CH(3)(CH(2))(17)Si(OCH(3))(3)) on a silicon oxide surface have been characterized by water contact-angle measurements, X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and sum frequency generation (SFG) vibrational spectroscopy. XPS demonstrated that APS in the mixed SAM is significantly enriched in comparison to that in solution, indicating the preferential adsorption of APS during the SAM formation. AFM observations showed that the mixed SAM becomes rougher. SFG revealed that the coadsorption of APS induced a conformation disordering in the ODS molecules present in the mixed SAM. The surface enrichment of APS has been explained in terms of differences in the surface adsorption rates of the two components as well as in the self-congregation states of APS molecules in the bulk solution. Furthermore, the structure of the water molecules on the mixed SAM surface in contact with the aqueous solutions at different pH's has also been studied. The results indicate that the mixed-SAM modified surface is positively charged at pH < 5 and negatively charged at pH > 7.     

取代苯基硫脲在Au表面的自组装

制备了对甲苯基硫脲、对氯苯基硫脲和2，4，6-三溴苯基硫脲在Au表面的自组装单分子膜（SAMs），用润湿角测量仪、椭圆偏振仪、X-射线光电子能谱仪（XPS）和原子力显微镜（AFM）对单分子膜进行了分析表征。结果表明取代苯基硫脲分子的S原子与Au形成Au-S键而诱导吸附分子形成取向排列的单分子膜。由于Au表面本身具有一定的缺陷和吸附的可逆性，使得所形成的单分子膜具有一定的缺陷。     

正十八烷醇在HOPG上形成自组装膜的吸附特性

研究了正十八烷醇在高定向热解石墨(HOPG)上形成自组装膜的吸附特性, 正十八烷醇在室温下从溶液中吸附至HOPG上形成整齐定向排列的单层自组装膜. 通过扫描隧道显微镜(STM)、接触角测量和X射线光电子能谱(XPS)分析了正十八烷醇单层自组装膜在HOPG上的结构. 实验结果表明, 正十八烷醇自组装膜在基底上成平铺或直立形态, 由于分子在基底上覆盖程度的不同, 会导致它在基底上排列的方式有所不同.     

Formation and structure of self-assembled monolayers of alkanethiolates on palladium

The adsorption of n-alkanethiols onto polycrystalline thin films of palladium containing a strong (111) texture produces well-organized, self-assembled monolayers. The organization of the alkane chains in the monolayer and the nature of the bonding between the palladium and the thiol were studied by contact angle measurements, optical ellipsometry, reflection absorption infrared spectroscopy (RAIRS), and X-ray photoelectron spectroscopy (XPS). The XPS data reveals that a compound palladium-sulfide interphase is present at the surface of the palladium film. The RAIR spectra, ellipsometry data, and wetting properties show that the palladium-sulfide phase is terminated with an organized, methyl-terminated monolayer of alkanethiolates. The local molecular environment of the alkane chains transitions from a conformationally disordered, liquidlike state to a mostly all-trans, crystalline-like structure with increasing chain length (n = 8-26). The intensities and dichroism of the methylene and methyl stretching modes support a model for the average orientation of an ensemble of all-trans-conformer chains with a tilt angle of approximately 14-18 degrees with respect to the surface normal and a twist angle of the CCC plane relative to the tilt plane of approximately 45 degrees. The SAMs are stable in air, although the sulfur present at the surface oxidizes in air over a period of 2-5 days at room temperature. The differences in chain organization between SAMs formed by microcontact printing and by solution deposition are also examined by RAIRS and XPS.     

Metal ion interaction with phosphorylated tyrosine analogue monolayers on gold

Phosphorylated tyrosine analogue molecules (pTyr-PT) were assembled onto gold substrates, and the resulting monolayers were used for metal ion interaction studies. The monolayers were characterized by X-ray photoelectron spectroscopy (XPS), infrared reflection-absorption spectroscopy (IRAS), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS), both prior to and after exposure to metal ions. XPS verified the elemental composition of the molecular adsorbate and the presence of metal ions coordinated to the phosphate groups. Both the angle-dependent XPS and IRAS results were consistent with the change in the structural orientation of the pTyr-PT monolayer upon exposure to metal ions. The differential capacitance of the monolayers upon coordination of the metal ions was evaluated using EIS. These metal ions were found to significantly change the capacitance of the pTyr-PT monolayers in contrast to the nonphosphorylated tyrosine analogue (TPT). CV results showed reduced electrochemical blocking capabilities of the phosphorylated analogue monolayer when exposed to metal ions, supporting the change in the structure of the monolayer observed by XPS and IRAS. The largest change in the structure and interfacial capacitance was observed for aluminum ions, compared to calcium, magnesium, and chromium ions. This type of monolayer shows an excellent capability to coordinate metal ions and has a high potential for use as sensing layers in biochip applications to monitor the presence of metal ions.     

Formation of alkanethiol monolayer on Ge(111).

Alkanethiols, CH3(CH2)(n-1)SH, are shown to react readily with HF-treated Ge(111) surface at room temperature to form a high-quality monolayer. The resulting films are characterized by using contact angle analysis (CAA), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), spectroscopic ellipsometry (SE), and high-resolution electron energy loss spectroscopy (HREELS). The octanethiol and octadecanethiol films on Ge(111) both exhibit 101 degrees and 40 degrees water and hexadecane contact angles, respectively. These values indicate that the thiol surface coverage is relatively high, and that the films possess a high degree of orientational ordering. The angle-resolved XPS analysis supports that thiols are bound to the Ge surface by Ge-S bonds at the monolayer/Ge interface. The film thickness values obtained by XPS and SE agree well with the earlier reported values on alkyl monolayers on Ge(111) prepared by Grignard reaction. On the basis of HREEL spectra taken after thermal annealing steps, the monolayers are found to be thermally stable up to 450 K. The thermal stability provides further evidence that thiols are covalently bonded to Ge(111).     

Electrochemical and surface characterization of 4-aminothiophenol adsorption at polycrystalline platinum electrodes

The formation of a self-assembled monolayer (SAM) of 4-aminothiophenol (4-ATP) on polycrystalline platinum electrodes has been characterized by surface analysis and electrochemistry techniques. The 4-ATP monolayer was characterized by cyclic voltammetry (CV), linear sweep voltammetry, Raman spectroscopy, reflection-absorption infrared (RAIR) spectroscopy, and X-ray photoelectron spectroscopy (XPS). CV was used to study the dependence of the adsorption time and 4-ATP solution concentration on the relative degree of coverage of 4-ATP monolayers on polycrystalline Pt electrodes. The adsorption time range probed was 24-72 h. The optimal concentration of 4-ATP needed to obtain the highest surface at the lowest adsorption time was 10 mM. RAIR and Raman spectroscopy for 4-ATP-modified platinum electrodes showed the characteristic adsorption bands for 4-ATP, such as nuNH, nuCH(arom), and nuCS(arom), indicating the adsorption on the platinum surface. The XPS spectra for the modified Pt surface presented the binding energy peaks of sulfur and nitrogen. High energy resolution XPS studies, RAIR, and Raman spectrum for platinum electrodes modified with 4-ATP indicate that the molecules are sulfur-bonded to the platinum surface. The formation of a S-Pt bond suggests that ATP adsorption leads to an amino-terminated electrode surface. The thickness of the monolayer was evaluated via angle-resolved XPS (AR-XPS) analyses, giving a value of 8 A. As evidence of the terminal amino group on the electrode surface, the chemical derivatization of the 4-ATP SAM was done with 16-Br hexadecanoic acid. This surface reaction was followed by RAIR spectroscopy.     

Growth of long CdS nanowires using a carboxylic acid-functionalized self-assembled monolayer as substrate

We report a novel result that long CdS nanowires with typical width of 70–80 nm and length ranging from several micrometers to tens of micrometers can be obtained by the in situ growth on substrate of a carboxylic acid-functionalized self-assembled monolayer (SAM), which formed from a rigid aromatic molecule on mica surfaces. The as-grown CdS nanowires were characterized by X-ray photoelectron spectroscopy (XPS), Transmission electron microscopy (TEM) and Energy-dispersive X-ray spectroscopy (EDS). A possible mechanism that accounts for the formation of the one-dimensional (1D) nanowires was also discussed.     

Self-assembled monolayers of disulfide Cu porphyrins on Au surfaces: adsorption induced reduction and demetalation

Metalloporphyrin molecules have a wide range of potential applications in diverse technological areas ranging from electronics to optoelectronics, electrochemistry, photophysics, chemical sensors, and catalysis. In particular, self-assembled monolayers of porphyrin molecules have recently attracted considerable interest. In this work we have studied for the first time the self-assembly of a novel Cu deutero porphyrin functionalized with disulfide moieties using electrochemical techniques, UV-vis absorption spectroscopy, polarization modulation infrared reflection absorption spectroscopy, and photoelectron spectroscopies (XPS and UPS). Experimental results indicate that the molecule adsorbs retaining its molecular integrity without forming molecular aggregates via the formation of Au-S covalent bonds. Furthermore, the monolayer consists of a packed array of molecules adsorbed with the plane of the porphyrin molecule at an angle of around 30° with respect to the surface normal. Interestingly, adsorption induces reduction of the Cu center and its consequent removal from the center of the porphyrin ring resulting in porphyrin demetalation. Our results are important in the design of self-assembled monolayers of metallo porphyrins where not only blocking of the metal center by the functional groups that drive the self-assembly should be considered but also possible adsorption induced demetalation with the consequent loss in the properties imparted by the metal center.     

Self-assembled monolayers prepared from ω-thiophene-functionalized n-alkyltrichlorosilane on silicon substrates

Self-assembled monolayers (SAMs) of thienyl-functionalized n-alkyltrichlorosilane (11-(3-thienyl)undecyltrichlorosilane [TUTS]) have been prepared by adsorption from solution and characterized by using X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), contact angle measurements, ellipsometry, and scanning electron microscopy (SEM). Using contact angle and SEM measurements, the film preparation protocol was optimized, resulting in reproducible SAM formation with no adverse deposition of polysiloxane particles. XPS and ellipsometry studies confirmed the existence of SAM formation. AFM results show a smooth and homogeneous SAM, with surface roughness of Ra≤0.2 nm, which is slightly higher than the corresponding values for octadecyltrichlorosilane (OTS) SAMs. Such thiophene-based SAM surfaces can be used for surface-initiated polymerization of thiophene. The resulting formed polythiophene layers at non-compatible surfaces offer some practical applications in manufacturing [W. Plieth, A. Fikus, D. Appelhans, H.-J. Adler, German Patent Application No. 2661977 (1998); D. Appelhans, D. Ferse, H.-J. Adler, A. Fikus, W. Plieth, B. Aldolphi et al., J. Electrochem. Soc. (accepted)].     

Corrosion resistant performances of alkanoic and phosphonic acids derived self-assembled monolayers on magnesium alloy AZ31 by vapor-phase method

Alkanoic and phosphonic acid derived self-assembled monolayers (SAMs) were formed on magnesium alloy by the vapor phase method. AFM and XPS studies showed that SAMs were formed on Mg alloy. The chemical and anticorrosive properties of the SAMs prepared on magnesium alloys were characterized using contact angle measurements, X-ray photoelectron spectroscopy (XPS), and electrochemical measurements. Water contact angle measurements revealed that, although SA and ISA have the same headgroup to anchor to the magnesium alloy surface, the packing density on the magnesium alloy surface could be considerably different. The contact angle hysteresis of SAMs with a carboxylate headgroup is much larger than that of SAMs with a phosphonic acid group. The XPS O 1s peaks indicated more likely a mix of mono-, bi-, or tridentate binding of phosphonic acid SAM to the oxide or hydroxide surface of the Mg alloy. The electrochemical measurements showed that the phosphonic acid derived SAM had better corrosion resistance compared to alkanoic acid derived SAM. The chemical stability of SAMs modified magnesium alloy was investigated using water contact angle and XPS measurements. The water contact angle and XPS measurements revealed that the molecular density of OP and PFEP on magnesium alloy would be higher than those of SA and ISA on magnesium alloy.     

Water exclusion at the nanometer scale provides long-term passivation of silicon (111) grafted with alkyl monolayers

This work is a quantitative study of the conditions required for a long-term passivation of the interface silicon-alkyl monolayers prepared by thermal hydrosilyation of neat 1-alkenes on well-defined H-Si(111) surfaces. We present electrochemical capacitance measurements (C-U) in combination with ex situ atomic force microscopy (AFM) observations and X-ray photoelectron spectroscopy (XPS) measurements. Capacitance measurements as a function of the reaction time and XPS data reveal close correlations between the chemical composition at the interface and its electronic properties. A very low density of states is found if suboxide formation is carefully prevented. The monitoring of C-U plots and AFM imaging upon exposure of the sample in diverse conditions indicate that the initial electronic properties and structure of the interface are long-lasting only when the monolayer surface coverage is theta > 0.42. A model demonstrates that this threshold value corresponds to a monolayer with intermolecular channels narrower than approximately 2.82 A, which is equal to the diameter of a water molecule. Water exclusion from the monolayer promotes long-term passivation of the silicon surface against oxidation in air and water as well as perfect corrosion inhibition in 20% NH(4)F. We provide two criteria to assess when a sample is optimized: The first one is an effective dielectric constant <2.5, and the second one is a very characteristic energy diagram at open circuit potential.     

In situ self-assembled photo-switchable liquid crystal alignment layer using azosilane monomer-liquid crystal mixture system

Self-assembled monolayers (SAMs) are a unique approach for the liquid crystal (LC) alignment in electro-optical applications such as displays. Herein, a new methodology for photo-switchable LC alignment layer using an azosilane monomer and LC mixture system in the absence of any other foreign alignment layer is presented. The azosilane monomer spontaneously separated from the host LCs, and formed a stable monolayer network on the substrate surface. Data from X-ray photo-electron spectroscopy (XPS), spectroscopic elipsometry (SE), water contact angle and LC alignment studies confirmed that, in the azosilane and LC mixture system, azosilane makes an in situ SAM that is capable of photo-switchable LC alignment layer on glass and indium tin oxide (ITO) substrates. The LCs are aligned with respect to change in the photo-isomerisation of the azo molecule.     

Structural characterization of 4-bromostyrene self-assembled monolayers on si(111)

Organic functionalization of silicon holds promise for a variety of applications ranging from molecular electronics to biosensing. Because the performance and reliability of organosilicon devices will be intimately tied to the detailed structure of the organic adlayers, it is imperative to develop systematic strategies for forming and characterizing self-assembled monolayers (SAMs) on silicon with submolecular spatial resolution. In this study, we use 4-bromostyrene for the photochemical growth of Br-terminated SAMs on Si(111). A variety of experimental and theoretical techniques including atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), X-ray reflectivity (XRR), X-ray standing waves (XSW), X-ray fluorescence (XRF), and density functional theory (DFT) have been employed to determine the coverage and conformation of the 4-bromostryene molecules within the SAM. In particular, AFM verifies a continuous and atomically flat SAM, and the XRR data indicate a SAM thickness of 8.50 A and a molecular coverage of 46% of the surface silicon atoms. Because the DFT calculations indicate a molecular length of 8.89 A, the measured XRR thickness implies a molecular tilt angle of approximately 17 degrees. The XRR analysis also suggests that the Br atoms are preserved on top of the SAM in agreement with XPS measurements that show bromine bound solely to carbon and not to silicon. XRF reveals a Br atomic coverage of 50%, again in close agreement to that found by XRR. Single-crystal Bragg diffraction XSW is used to generate a three-dimensional map of the Br distribution within the SAM, which in conjunction with the XRR result suggests that the 4-bromostyrene molecules are tilted such that the Br atoms are located over the T4 sites at a height of 8.50 A above the top bulklike Si(111) layer. The direction of molecular tilt toward the T4 sites is consistent with that predicted by the DFT calculation. Overall, through this unique suite of complementary structural characterization techniques, it is concluded that the Br functional handle is preserved at the top of the SAM and is available for further substitutional chemistry.