Simultaneous sensing of L-tyrosine and epinephrine using a glassy carbon electrode modified with nafion and CeO2 nanoparticles

An electrochemical sensor was developed and tested for detection of L-tyrosine in the presence of epinephrine by surface modification of a glassy carbon electrode (GCE) with Nafion and cerium dioxide nanoparticles. Fabrication parameters of a surfactant-assisted precipitation method were optimized to produce 2–3 nm CeO₂ nanoparticles with very high surface-to-volume ratio. The resulting nanocrystals were characterized structurally and morphologically by X-ray diffractometery (XRD), scanning and high resolution transmission electron microscopy (SEM and HR-TEM). The nanopowder is sonochemically dispersed in a Nafion solution which is then used to modify the surface of a GCE electrode. The electrochemical activity of L-tyrosine and epinephrine was investigated using both a Nafion-CeO₂ coated and a bare GCE. The modified electrode exhibits a significant electrochemical oxidation effect of L-tyrosine in a 0.2 M Britton-Robinson (B-R) buffer solution of pH 2. The electro-oxidation peak current increases linearly with the L-tyrosine concentration in the molar concentration range of 2 to 160 μM. By employing differential pulse voltammetry (DPV) for simultaneous measurements, we detected two reproducible peaks for L-tyrosine and epinephrine in the same solution with a peak separation of about 443 mV. The detection limit of the sensor (signal to noise ratio of 3) for L-tyrosine is ~90 nM and the sensitivity is 0.20 μA μM⁻¹, while for epinephrine these values are ~60 nM and 0.19 μA μM⁻¹. The sensor exhibited excellent selectivity, sensitivity, reproducibility and stability as well as a very good recovery time in real human blood serum samples.

Simultaneous electrochemical determination of L-tyrosine and epinephrine in blood plasma with Nafion-CeO₂/GCE modified electrode showing a 443 mV peak-to-peak potential difference between species oxidation peak currents.

     

Simultaneous voltammetric sensing of acetaminophen,epinephrine and melatonin using a carbon paste electrode modified with zinc ferrite nanoparticles

A highly selective electrochemical sensor was fabricated based on a modified carbon paste electrode with zinc ferrite nanoparticles (ZnFe₂O₄ NPs). The nanocomposite has attractive properties such as high surface-to-volume ratio and good electrocatalytic activity towards the drugs acetaminophen (AC), epinephrine (EP), and melatonin (MT), best at working voltages of 0.35, 0.09 and 0.55 V (vs. Ag/AgCl), respectively. The linear ranges (and detection limits) are 6.5–135 (0.4) μmol L^?1 for AC, 5–100 (0.7) μmol L^?1 for EP, and 6.5–145 (3) μmol L^?1 for MT.

Open image in new window

Graphical abstract A novel electrochemical sensor based on a modified carbon paste electrode with zinc ferrite nanoparticles (ZnFe₂O₄) for the simultaneous detection of the acetaminophen, epinephrine and melatonin was fabricated

     

Electrochemical behavior and voltammetric determination of L-tryptophan and L-tyrosine using a glassy carbon electrode modified with single-walled carbon nanohorns

We report a simple method for the direct and quantitative determination of L-tryptophan (Trp) and L-tyrosine (Tyr) using a glassy carbon electrode (GCE) modified with single-walled carbon nanohorns (SWCNHs). The SWCNH modified GCE exhibits high electrocatalytic activity towards the oxidation of both Trp and Tyr. It shows a linear response to Trp between 0.5 and 50 μM and to Tyr between 2 and 30 μM. The detection limits for Trp and Tyr are 50 nM and 400 nM, respectively. In addition, the modified GCE displays good selectivity and good sensitivity, thus making it suitable for the determination of Trp and Tyr in spiked serum samples.

Non-enzymatic sensing of glucose at neutral pH values using a glassy carbon electrode modified with carbon supported Co@Pt core-shell nanoparticles

Co@Pt core-shell nanoparticles (NPs) were synthetized by a two-step reductive method using carbon (Vulcan XC-72) as a solid support. The NPs were characterized by X-ray diffraction, field emission gun scanning electron microscopy, energy dispersive X-ray spectroscopy, and transmission electron microscopy. Their electrochemical performance was evaluated by cyclic voltammetry, electrochemical impedance spectroscopy and chronoamperometry, and these showed that the Co@Pt NPs display an electrocatalytic activity towards the oxidation of glucose that is much better than that of plain Pt NPs. Under optimized conditions and at pH 7.0, the oxidation current of glucose at a working potential of −50 mV (vs. SCE) is linearly related to its concentration in the 1.0 to 30 mM range, and the detection limit is 0.3 mM (S/N = 3). It therefore covers the clinical range. The sensor also exhibits excellent stability and repeatability.

Co@Pt core-shell nanoparticles (NPs) display an electrocatalytic activity towards the oxidation of glucose that is much better than that of plain Pt NPs. The oxidation current for glucose is linearly related to its concentration in the 1.0 to 30 mM range, and the detection limit is 0.3 mM (S/N =3).

     

Electrocatalytic determination of paraquat using a nafion film coated glassy carbon electrode

A nafion film coated glassy carbon electrode (NFGCE) was employed for the determination of paraquat. Paraquat was accumulated onto NFGCE by the cation-exchange feature of nafion at open circuit potential in basic medium followed by cathodic differential pulse voltammetric (CDPV) determination in a medium containing permanganate ions. The sensitivity for the determination of paraquat was improved through the electrocatalytic reduction of permanganate by the reduced paraquat. With 3-min accumulation, the analytical signal versus concentration dependence was linear from 1.0 to 100 ppb with a detection limit of 0.5 ppb. The interference from common metal ions was minimized by addition of ethylenediaminetetraacetate (EDTA) into the sample solution. The use of nafion also improves the resistance to interference from surfactants.     

Determination of trace metoclopramide by anodic stripping voltammetry with nafion modified glassy carbon electrode

A novel method is described for determination of metoclopramide (MCP) by second-derivative adsorptive anodic stripping voltammetry with a nafion-modified electrode. The stripping peak current is proportional to the concentration of MCP over the range 1.2×10⁻⁹–4.6×10⁻⁷ M. The detection limit is 8.0×10⁻¹¹ M with 4-min accumulation. The method has been successfully applied to the determination of MCP in human serum.     

Electrochemistry and voltammetric determination of L-tryptophan and L-tyrosine using a glassy carbon electrode modified with a Nafion/TiO2-graphene composite film

We describe a glassy carbon electrode (GCE) modified with a film composed of Nafion and TiO₂-graphene (TiO₂-GR) nanocomposite, and its voltammetric response to the amino acids L-tryptophane (Trp) and L-tyrosine (Tyr). The incorporation of TiO₂ nanoparticles with graphene significantly improves the electrocatalytic activity and voltammetric response compared to electrodes modified with Nafion/graphene only. The Nafion/TiO₂-GR modified electrode was used to determine Trp and Tyr with detection limits of 0.7 and 2.3 μM, and a sensitivity of 75.9 and 22.8 μA mM^?1 for Trp and Tyr, respectively.

Simultaneous voltammetric determination of acetaminophen and tramadol using Dowex50wx2 and gold nanoparticles modified glassy carbon paste electrode

A glassy carbon paste electrode (GCPE) modified with a cation exchanger resin, Dowex50wx2 and gold nanoparticles (D50wx2–GNP–GCPE) has been developed for individual and simultaneous determination of acetaminophen (ACOP) and tramadol (TRA). The electrochemical behavior of both the molecules has been investigated employing cyclic voltammetry (CV), chronocoulometry (CC), electrochemical impedance spectroscopy (EIS) and adsorptive stripping square wave voltammetry (AdSSWV). The studies revealed that the oxidation of ACOP and TRA is facilitated at D50wx2–GNP–GCPE. Using AdSSWV, the method allowed simultaneous determination of ACOP and TRA in the linear working range of 3.34 × 10⁻⁸ to 4.22 × 10⁻⁵ M with detection limits of 4.71 × 10⁻⁹ and 1.12 × 10⁻⁸ M (S/N = 3) for ACOP and TRA respectively. The prepared modified electrode shows several advantages such as simple preparation method, long-time stability, ease of preparation and regeneration of the electrode surface by simple polishing and excellent reproducibility. The high sensitivity and selectivity of D50wx2–GNP–GCPE were demonstrated by its practical application in the determination of both ACOP and TRA in pharmaceutical formulations, urine and blood serum samples.     

Determination of nimesulide in human serum using a glassy carbon electrode modified with SiC nanoparticles

A glassy carbon electrode (GCE) was modified with silicon carbide nanoparticles and used to investigate the electrochemistry of the drug nimesulide via voltammetry and chronoamperometry. The structure of the modified electrode was studied by field emission scanning electron microscopy. Nimesulide undergoes electroreduction at pH 2 at a potential that is shifted from ?526 mV (at the bare GCE) to ?387 mV at the modified electrode. Simultaneously, sensitivity is increased by a factor of 5.8. The charge transfer coefficient, diffusion coefficient, standard heterogeneous rate constant and catalytic reaction rate constant were determined. A plot potential vs. pH revealed a voltammetric pKa value of about 6.5–7.0. The differential pulse voltammetric calibration plot for nimesulide is linear in 0.09–8.7 μM concentration range, and the detection limit and sensitivity are 30 nM and 512 nA.μM^?1, respectively. The modified electrode was applied to the determination of nimesulide in acidic solution and human blood serum samples without further pretreatment. The recoveries, as determined by the standard addition method, range from 95.7 to 98.7%, with an RSD of around 1.6%.

肾上腺素在对甲苯磺酸修饰电极上的电化学行为

研究了对甲苯磺酸在玻碳电极上电化学聚合的条件及修饰电极的电化学特性, 发现该聚合膜对肾上腺素的电氧化有显著的催化作用, 在pH 7.0的磷酸盐缓冲溶液中, 搅拌富集40 s后, 用循环伏安法对肾上腺素进行了测定, 线性范围: 4.05×10-7～9.45×10-6 mol/L, 检出限为3.2×10-8 mol/L. 对2.0×10-6 mol/L肾上腺素平行测定7次相对标准偏差为2.4%. 该电极有效地排除了抗坏血酸的干扰, 具有良好的稳定性和重现性.     

Simultaneous determination of dopamine and serotonin using a carbon nanotubes-ionic liquid gel modified glassy carbon electrode

An electrochemical sensor based on carbon nanotubes (CNTs)-ionic liquid (IL) composite has been developed for the simultaneous determination of serotonin (5-HT) and dopamine (DA). The CNTs-IL composite modified electrode presents excellent selectivity and sensitivity towards 5-HT and DA and eliminates the interference of ascorbic acid. The parameters which influence the determination of 5-HT and DA have been investigated. Under optimized conditions, linear calibration graphs were obtained in the range from 20 nM to 7 µM, with a detection of limit of 8 nM, for 5-HT, and in the range from 0.1 to 12 µM, with a detection of limit of 60 nM, for DA. The electrode has been applied to the assay of 5-HT and DA in human blood serum with good results.     

Electrochemical sensing of catechol using a glassy carbon electrode modified with a composite made from silver nanoparticles, polydopamine, and graphene

We report on the modification of a glassy carbon electrode with a composite consisting of silver nanoparticles (AgNPs), polydopamine, and graphene to give an electrochemical sensor for catechol. The composite was characterized by transmission electron microscopy, and the electrochemical behavior of catechol at the modified electrode was studied by cyclic voltammetry. The electrochemical response is greatly enhanced and thought to result from a combination of beneficial effects including the good conductivity and large surface area of the AgNPs, the high conductivity of graphene, the synergistic effects of the composite, and the increased quantity of catechol that is adsorbed on the surface of the electrode. Differential pulse voltammetric responses are proportional to the concentration of catechol between 0.5 and 240?μM levels of catechol, and the detection limit is 0.1?μM (S/N?=?3). The performance of the sensor was evaluated with catechol-spiked water samples, and recoveries range from 96.5 % to 103.1 %. The results indicated that the composite presented here is a promising substrate for use in electrochemical sensing.

Voltammetric sensing of sulfamethoxazole using a glassy carbon electrode modified with a graphitic carbon nitride and zinc oxide nanocomposite

A voltammetric sensor is described for the determination the antibiotic sulfamethoxazole (SMZ). It is based on the use of a glassy carbon electrode (GCE) modified with a nanocomposite prepared from graphitic carbon nitride and zinc oxide (g-C₃N₄/ZnO). The nanorod-like ZnO nanostructure were synthesized sonochemically. The g-C₃N₄/ZnO nanocomposite was then prepared by mixing g-C₃N₄ with ZnO, followed by ultrasonication. The morphology and structure of the nanocomposite were characterized by X-ray diffraction, Fourier-transform infrared spectroscopy and transmission electron microscopy. Under the optimal conditions, the response of the electrode, typically measured between 0.8 and 0.9 V (vs. Ag/AgCl), increases linearly in the 20 nM to 1.1 mM SMZ concentration range, and the lower detection limit is 6.6 nM. This is better than that of many previously reported sensors for SMZ. The modified electrode is highly selective, well reproducible and maintains its activity for at least 4 weeks. It was applied to the determination of SMZ in spiked human blood serum samples in with satisfactory results.

Open image in new window

Graphical abstract Schematic presentation of the voltammetric sensor for sulfamethoxazole. It consists of a glassy carbon electrode modified with a nanocomposite prepared from graphitic carbon nitride (g-C₃N₄/ZnO) that was supported with zinc oxide nanorods.

     

A glutathione biosensor based on a glassy carbon electrode modified with CdO nanoparticle-decorated carbon nanotubes in a nafion matrix

A nanocomposite consisting of cadmium oxide decorated with carbon nanotubes (CdO.CNT NC) was prepared by a wet-chemical technique, and its optical, morphological, and structural properties were characterized by FTIR, UV/Vis, FESEM coupled to XEDS, XPS, and XRD methods. A flat glassy carbon electrode was modified with the nanocomposite to obtain a sensor for L-glutathione (GSH) which displays improved sensitivity, a large dynamic range and good long-term stability. The calibration plot (best acquired at a voltage of 0.5 V) is linear (r ² = 0.99) in the 0.1 nM to 0.01 M GSH concentration range. The detection limit is as low as 30.0 pM, and the sensitivity is ~9.49 μA?μM^?1?cm^?2. To the best of our knowledge, this is the first report on the determination of GSH using such a modified glassy carbon electrode (GCE) in combination with I-V method. The GCE was applied to the selective determination of GSH in spiked rabbit serum samples and gave acceptable results.

Open image in new window

Graphical abstract A selective glutathione biosensor based on wet-chemically prepared CdO.CNT/Nafion/GCE was fabricated by reliable I-V method and shows good analytical parameters such as high sensitivity, low detection limit, long-term stability, and large dynamic range.

     

Selective determination of epinephrine in the presence of ascorbic acid using a glassy carbon electrode modified with graphene

A graphene-modified glassy carbon electrode was fabricated via a drop-casting method, and applied to the electrochemical detection of epinephrine. The capacity of the graphene-modified glassy carbon electrode for the selective detection of epinephrine was confirmed in a sufficient amount of ascorbic acid (2 mmol L(-1)) by cyclic voltammetry. The modified electrode showed an excellent electrocatalytical effect on the oxidation of epinephrine. A pair of well-defined redox waves were observed in voltammograms of epinephrine in a phosphate buffered solution (pH 4.0). The peak potentials of epinephrine remained unchanged, and the oxidation peak currents showed a linear relation versus the epinephrine concentration in the range of 3.85 × 10(-7) - 1.31 × 10(-5) mol L(-1) and 1.31 × 10(-5) - 1.09 × 10(-4) mol L(-1) with a correlation coefficient as follows: i(pa1) = -4.25 × 10(-6) - 1.99c (mol L(-1)), R(1) = 0.9953; i(pa2) = -4.31 × 10(-5) - 0.315c (mol L(-1)), R(2) = 0.9988. Detection limit is estimated to be 8.9 × 10(-8) mol L(-1). Graphene-modified glassy carbon electrode was applied to epinephrine sample analysis, and the results were in good agreement with the standard values.