环状配合物Me_2Si［η~5－C_5H_4Fe（CO）_2］_2SnR_2的合

通过ＳｎＣｌ_２对化合物Ｍｅ_２Ｓｉ［η~５－Ｃ_５Ｈ_４Ｆｅ（ＣＯ）］_２（μ－ＣＯ）_２（Ⅰ）中Ｆｅ－Ｆｅ键的插入反应以及Ⅰ被Ｎａ－Ｈｇ齐还原所生成的相应双铁负离子｛Ｍｅ_２Ｓｉ［η~５－Ｃ_５Ｈ_４Ｆｅ（ＣＯ）_２］_２｝~（２－）与ＳｎＲ_２Ｃｌ_２（Ｒ＝Ｍｅ，Ｐｈ）的亲核反应，合成了环状化合物Ｍｅ_２Ｓｉ［η~５－Ｃ_５Ｈ_４Ｆｅ（ＣＯ）_２］_２ＳｎＲ_２［Ｒ＝Ｃｌ（１），Ｍｅ（２），Ｐｈ（３）］。以元素分析、ＩＲ和~１ＨＮＭＲ谱表征了它们的结构，并用Ｘ射线衍射测定了配合物３的晶体结构。３为单斜晶系，空间群Ｐ２_１／ｎ，ａ＝１．０３８４（３）ｎｍ，ｂ＝１．６３８４（１）ｎｍ，ｃ＝１．５７６２（５）ｎｍ，β＝９７．９３（２）°，Ｖ＝２．６５６（２）ｎｍ~３，Ｚ＝４，Ｄｘ＝１．７１ｇ／ｍＬ。     

（四甲基二硅撑）双（3－三甲硅基环戊二烯基）－四羰基二铁的反应性

标题化合物（Ｍｅ_２ＳｉＳｉＭｅ_２）［η￣５－（３－Ｍｅ_３ＳｉＣ_５Ｈ_３）Ｆｅ（ＣＯ）_２］_２／（μ－ＣＯ）_２（Ａ）分子中的Ｆｅ－Ｆｅ键被钠汞齐还原断裂，生成相应的双铁负离子，分别与ＭｅＣＯＣｌ、ＰｈＣＯＣｌ、ＰｈＣＨ_２Ｃｌ、ＣｌＣＨ_２ＣＯＯＣ_２Ｈ_５和Ｐｈ_３ＳｎＣｌ进行亲核取代反应，生成在铁原子上引入相应取代基的产物（Ｍｅ_２ＳｉＳｉＭｅ_２）［η￣５－（３－Ｍｅ_３ＳｉＣ_５Ｈ_３）Ｆｅ（ＣＯ）_２Ｒ］_２（Ｒ：ＭｅＣＯ（１），ＰｈＣＯ（２），ＰｈＣＨ_２（３），ＣＨ_２ＣＯＯＣ_２Ｈ_５（４），Ｐｈ_３Ｓｎ（５），Ｉ（６））。Ａ在氯仿中与碘反应，得到Ｆｅ－Ｆｅ断裂的双铁碘化物，但在苯中与过量碘反应，则得到Ｆｅ－Ｉ－Ｆｅ桥联的离子型化合物（Ｍｅ_２ＳｉＳｉＭｅ_２）［η￣５－（３－Ｍｅ_３ＳｉＣ_５Ｈ_３）Ｆｅ（ＣＯ）_２］_２Ｉ·Ｉ（７）。化合物６的晶体和分子结构经Ｘ射线衍射测定，６属单斜晶系，Ｐ２１／ｃ空间群，ａ＝１．７２１７（４）ｎｍ，ｂ＝０．７７５３（２）ｎｍ，Ｃ＝１．３６２９（７）ｎｍ，β＝１０３．８０（３）°，Ｖ＝１．７６７（２）ｎｍ３，Ｚ＝４，Ｄｃ＝１．６２９９·ｃｍ－１，最终偏差因子Ｒ＝０．０５４。     

金属-金属氧化物-载体相互作用研究:混合C4烷烃脱氢

以混合Ｃ４烷烃脱氢反应研究了Ｐｔ（Ｐｄ，Ｒｈ，Ｉｒ）－金属氧化物（Ｓｎ，Ｉｎ，Ｓｂ，Ｔｉ，Ｖ，Ｍｏ，Ｍｎ，Ｆｅ的氧化物）－载体的相互作用发现Ｐｔ－Ｉｎ（Ｓｎ）／γ－Ａｌ２Ｏ３，Ｐｔ－Ｆｅ／ＳｉＯ２脱氢性能较好。并根据可变价金属氧化物的特性，金属氧化物含量存在最佳值及载体的性质对“夹心”结构模型进行了讨论。     

Ce2O—TiO2／SiO2的制备及除氟性能研究

以ＳｉＯ２为基质，ＣｅＯ２ＴｉＯ２为包覆物质，采用溶胶凝胶法制备ＣｅＯ２ＴｉＯ２／ＳｉＯ２表面复合物，并对所制复合物进行除氟测试。用扫描电镜（ＳＥＭ）观察表面形貌，讨论实验环境、试剂用量等因素对ＣｅＯ２ＴｉＯ２／ＳｉＯ２制备及除氟性能的影响，结果表明：ｎＴｉ（ＯＣ４Ｈ９）４／ｎＣｅＣｌ３·７Ｈ２Ｏ＝１、ｎＣＨ３ＣＯＯＨ／ｎＴｉ（ＯＣ４Ｈ９）４＝４５、ｎＣ３Ｈ８Ｏ３／ｎＴｉ（Ｏ４Ｈ９）４＝０３、ＲＨ＝９５％，热处理温度１１０℃时，所制ＣｅＯ２ＴｉＯ２／ＳｉＯ２对Ｆ－的吸附容量（ｑ）为２１４ｍｇ／ｇ，去除率（Ｅ）为８５６％。     

（四甲基二硅撑）二（3－三甲硅基环戊二烯基）四羰基二铁及其相关化合物的合成及结构

１，２－二（三甲硅基环戊二烯基）四甲基二硅烷与Ｆｅ（ＣＯ）_５在二甲苯中于１０５～１１０℃反应除分离到少量标题化合物（Ｍｅ_２ＳｉＳｉＭｅ_２）［η－（３－Ｍｅ_３ＳｉＣ_５Ｈ_３Ｆｅ（ＣＯ）］_２（μ－ＣＯ）_２（５）外，主要是生成了脱Ｍｅ_３Ｓｉ基的产物（Ｍｅ_２ＳｉＳｉＭｅ_２）［η－Ｃ_５Ｈ_４Ｆｅ（ＣＯ）］_２（μ－ＣＯ）_２（１）及１的热重排异构体［Ｍｅ_２ＳｉＣ５Ｈ４－Ｆｅ（ＣＯ）_２］_２（２）．将５的二甲苯溶液加热回流１８ｈ，则转化为其异构体［Ｍｅ_２Ｓｉ（Ｍｅ_３ＳｉＣ_５Ｈ_３）Ｆｅ（ＣＯ）_２］_２（６）．脱硅基发生在由相应反应物制备５的过程中。且脱硅基是与反应物中（Ｍｅ_２ＳｉＳｉＭｅ_２）桥的存在有关．５的晶体结构经Ｘ射线衍射测定属单斜晶系，Ｐ２_１／ｍ空间群，晶体学数据：ａ＝０．６７８０（１）ｎｍ，ｂ＝２．２３０３（９）ｎｍ，ｃ＝０．９９８８（１）ｎｎ，；β＝９８．９６（１）°，Ｖ＝１．４９６０ｎｍ~３．Ｚ＝２，Ｄ_ｃ＝１．３６ｇ／ｃｍ~３．     

MoO3／（Tio2—SiO2）催化剂的表面分散状态及催化性能的研究

用气相流动吸附法制备复合载体，用浸渍法制备ＭｏＯ３（ＴｉＯ２－ＳｉＯ２）催化剂，应用ＬＲＳ和ＴＰＲ技术研究ＭｏＯ３在复合载体ＴｉＯ２－ＳｉＯ２表面的分散发现ＴｉＯ２在ＳｉＯ２表面的分散可增强ＭｏＯ３与载体之间的相互作用，提高ＭｏＯ３在载体表面的分散阈值。     

SrTi_（1－x）Sn_xO_3的水热合成与结构研究

采用水热晶化法合成出ＳｒＴｉ_（１－ｘ）Ｓｎ_ｘＯ_３系列化合物，并对其结构进行了表征。结果表明，随着Ｓｎ含量的增加，产物的晶胞体积增大，红外吸收谱带发生劈裂，并向高波数方向移动；ＳｒＴｉ_（１－ｘ）Ｓｎ_ｘＯ_３化合物粒度较小，其中常含有少量有机物和吸附水，可以Ｔｉ（ＯＣ４Ｈ９）４为Ｔｉ源直接合成。     

WO_3在TiO_2／γ－Al_2O_3和在TiO_2／SiO_2复合载体表面的分散状态和最大分散量

ＷＯ_３在ＴｉＯ_２／γ－Ａｌ_２Ｏ_３和在ＴｉＯ_２／ＳｉＯ_２复合载体表面的分散状态和最大分散量邓存，陈巧平（宁德师范专科学校化学系，宁德３５２１００）刘英骏（北京大学物理化学研究所，北京１００８７１）关键词ＷＯ_３／（ＴｉＯ_２／γ－Ａｌ_２Ｏ_３）催化...     

（Pb_（0．88）Nd（0．10））（Ti_（0．92）In_（0．06）Mn_（0．2））O_3超细陶瓷粉末的制备与研究

（Ｐｂ_（０．８８）Ｎｄ（０．１０））（Ｔｉ_（０．９２）Ｉｎ_（０．０６）Ｍｎ_（０．２））Ｏ_３超细陶瓷粉末的制备与研究杨昆山，陈种菊，陈坚业，张惊涛（四川联合大学化学系，成都，６１００６４）关键词超细粉，共沉淀，制备掺Ｉｎ２Ｏ３、Ｎｄ２Ｏ３和ＭｎＯ?..     

柄型金属有机化合物（Ⅱ）──硅氧硅桥联二（1－茚基及四氢茚基）二氯化锆的合成和结构

１，３－二（１－茚基）四甲基二硅氧烷相继与丁基锂及ＺｒＣｌ_４·２ＴＨＦ作用，生成硅氧硅桥联二（１－茚基）二氯化锆（Ｍｅ_２ＳｉＯＳｉＭｅ_２）［Ｉｎｄ］_２ＺｒＣｌ_２（１）。对其进行催化氢化得到相应的四氢茚基化合物（Ｍｅ_２ＳｉＯＳｉＭｅ_２）［ＩｎｄＨ_４］_２ＺｒＣｌ_２（２）。１和２均含有顺式和反式二种异构体（１_ｃ和１_ｔ以及２_ｃ和２_ｔ），通过重结晶得到纯的单一异构体１_ｔ、２_ｃ和２_ｔ，１_ｃ和２_ｔ的晶体结构经Ｘ射线衍射测定，二者均属单斜晶系，Ｐ２_１／ｎ（１_ｔ）和Ｐ２_１／ｃ（２ｃ）空间群，其中２_ｃ分子的一个配体六元环在晶胞中具有两种几率完全相等的不同构象。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.