Polarization modulation Fourier transform infrared spectroscopy

Polarization modulation Fourier transform infrared spectroscopy can be measured by either double modulation FTIR or interferometric modulation FTIR techniques. The principles of both techniques are presented with examples of representative measurements. The relative advantages and disadvantages of each method are compared.     

Probing thymine with laser ablation molecular beam Fourier transform microwave spectroscopy

Laser ablation in combination with molecular beam Fourier transform microwave spectroscopy has been used to establish unambiguously the presence of the diketo form of thymine in the gas phase and to obtain its structure.     

Time-resolved Fourier transform emission spectroscopy of He/CH4 in a positive column discharge

Time-resolved Fourier transform infrared emission spectroscopy was applied to the study of a pulsed discharge in a He/CH(4) mixture. The dynamics of the formation and decay of acetylene ν(3) (3289 cm(-1)), methane ν(3) (3019 cm(-1)) and ν(1) (2917 cm(-1)), the CH radical electronic ground state X(2)Π(r) (2309-2953 cm(-1)), C(2) Bernath electronic transition B(1)Δ(g)-A(1)Π(u) (3337-3606 cm(-1)), molecular hydrogen emission transitions 5g-4f and 2p-2s, atomic hydrogen, and atomic helium were monitored in the 1800-4000 cm(-1) region. The time profile of the rotational and vibrational temperature of the CH radical was obtained for a 30 μs time interval during and after the discharge pulse. A kinetic model was used for the study of the chemical dynamics of the formation and decay of the individual fragments. The results from the model were compared to the experimental emission spectra.     

Fourier transform infrared photoacoustic spectroscopy of dental calculus

The mid and far FTIR spectra of supragingival and subgingival calculus were measured, respectively. From the subtraction spectra of the two types of calculus, the protein components of calculus have been obtained. The results of photoacoustic spectroscopy indicated the presence of protein layer on the surface of early calculus.     

Instrumental barriers in biological Fourier transform infrared spectroscopy

Biological applications of infrared spectroscopy have pressed for ever greater instrumental capabilities in terms of spectral sensitivity and quantitative exactness. Improved instrumentation has provided measurement of many vibrational modes in biological samples that previously were lost in noise. With highly optimized sampling conditions, useful measurements have been made with a peak-to-peak noise level less than 5 microabsorbance (5×10^–6 absorbance), at 0.5 cm^–1 resolution. However, optical and instrumental instabilities often result in sine waves that are not totally removed by the ratio of sample to reference. These often limit effective spectral sensitivity to 50 or 100 microabsorbance, peak-to-peak, and constitute a non-random noise. Non-atmospheric absorptions, especially one at 1959 cm^–1 with 0.8 cm^–1 band width (FWHM) are reported. The latter is due to a trace impurity in the KBr beam splitter substrate and compensator plate. Improvements in instrumentation and sampling conditions are expected to yield measurements of absorption bands as small as 50 microabsorbance with excellent signal/noise.     

Dynamic Fourier transform infrared spectroscopy in polymer research

The rapid-scanning capability of FTIR instrumentation has revitalized the field of vibrational spectroscopy in polymer research and will be discussed with reference to the study of polyurethane kinetics, the temperature dependence of hydrogen bonding in polyamide 6 and strain-induced crystallization in a polydimethylsiloxane elastomer.     

Fourier transform infrared emission spectra of MgH and MgD

High resolution Fourier transform infrared emission spectra of MgH and MgD have been recorded. The molecules were generated in an emission source that combines an electrical discharge with a high temperature furnace. Several vibration-rotation bands were observed for all six isotopomers in the X (2)Sigma(+) ground electronic state: v=1-->0 to 4-->3 for (24)MgH, v=1-->0 to 3-->2 for (25)MgH and (26)MgH, v=1-->0 to 5-->4 for (24)MgD, v=1-->0 to 4-->3 for (25)MgD and (26)MgD. The new data were combined with the previous ground state data, obtained from diode laser vibration-rotation measurements and pure rotation spectra, and spectroscopic constants were determined for the v=0 to 4 levels of (24)MgH and the v=0 to 5 levels of (24)MgD. In addition, Dunham constants and Born-Oppenheimer breakdown correction parameters were obtained in a combined fit of the six isotopomers. The equilibrium vibrational constants (omega(e)) for (24)MgH and (24)MgD were found to be 1492.776(7) cm(-1) and 1077.298(5) cm(-1), respectively, while the equilibrium rotational constants (B(e)) are 5.825 523(8) cm(-1) and 3.034 344(4) cm(-1). The associated equilibrium bond distances (r(e)) were determined to be 1.729 721(1) A for (24)MgH and 1.729 157(1) A for (24)MgD.     

Fourier transform raman spectroscopy using a bench-top fourier transform infrared spectrometer

The use of a bench top FTIR spectrometer for near infrared Fourier transform Raman spectroscopy is demonstrated. The use of near infrared excitation results in fluorescence free Raman spectra allowing previously difficult samples to be measured.     

Fourier transform infrared spectroscopy study of nanostructured nickel oxide

Nanostructured nickel oxide having different average particle sizes ranging from 3 to 16 nm were synthesized and Fourier transform infrared (FTIR) spectra of the samples were recorded in the far infrared (IR) region. The spectra were found to be dominated by surface mode absorptions with no distinct absorption corresponding to the bulk transverse optical mode. IR absorption coefficient, alpha, for the nanostructured NiO samples were calculated as a function of frequency using a macroscopic approach devised by Fuchs. The effects of crystalline geometry, numerical values of optical constants, filling factor and increased damping on the spectral features of the samples were analyzed. Though the simulations approximately reproduced the occurrence of a shoulder in the experimental spectra, the most intense peak in the simulated spectra was found to be about 50 cm(-1) above the corresponding experimentally observed peak. It was shown that the experimentally observed absorption maximum of all the samples were in close agreement with that determined using a microscopic theory based on the rigid ion model. The weak absorption peaks in the frequency region 60-100 cm(-1) appearing in the spectra of all the samples were identified as surface induced transverse acoustical modes, omegaTA, which became IR active due to the breakdown of translational symmetry in the nanocrystallites.     

Sexing of turkey poults by Fourier transform infrared spectroscopy

Fourier transform infrared (FT-IR) spectroscopy was used to probe the molecular composition of germinal cells and to identify the gender of turkey poults. Germinal cells obtained from a feather pulp were characterized by FT-IR micro spectroscopy. The sample set consisted of growing contour feathers from 23 male and 23 female turkey poults. Significant spectral variations were observed in the range between 1,000 and 1,250 cm⁻¹. The spectra of male turkey poults exhibit a significantly higher content of RNA than those of female turkeys. Spectral classification was performed by a non-supervised method based on the principal component analysis. An evaluation of the first and third PCs led to a classification of female and male poults with an accuracy of more than 95%.     

The reaction products of the 193 nm photolysis of vinyl bromide and vinyl chloride studied by time-resolved Fourier transform infrared emission spectroscopy

Time-resolved Fourier transform infrared (TRFTIR) emission spectroscopy has been used to study the 193 nm photolysis of vinyl bromide (C(2)H(3)Br) and vinyl chloride (C(2)H(3)Cl). Time-resolved IR emission was analysed to obtain nascent vibrational state populations of two primary photolysis products: HBr (v = 1-7) and HCl (v = 1-6). In both cases the nascent vibrational state populations monotonically decrease with increasing v and are in excellent agreement with previously published data. Time-resolved populations were analysed to yield rate constants for vibrational relaxation of HBr (v = 1-3) and HCl (v = 1-4) by parent vinyl bromide and vinyl chloride, respectively. In both cases the rate constants were found to increase with increasing vibrational quantum number, in agreement with a single quantum de-excitation via vibrational to vibrational energy transfer. Butadiene (C(4)H(6)) was identified as a secondary product of the photolysis of both vinyl halides, and shown to be formed from the reaction of parent vinyl halide with the vinyl radical. The presence of a buffer gas was found to produce a strong emission feature centred at 2,200 cm(-1), the intensity of which was dependent on the pressure of the buffer gas used, and whose kinetics are indicative of a secondary reaction product. We propose that this emission is from the vibrational progression of the electronic transition A(0, v, 1) --> X(0, v, 2) in the secondary reaction product C(2)H, whose formation route is favoured by the presence of buffer gas.     

Determination of chlorinated hydrocarbons introduced into air/acetylene flames by Fourier transform infrared emission spectroscopy

A Fourier transform spectrometer is used to record the infrared emission from chlorinated hydrocarbons combusted in an air/acetylene flame. In this manner, the chlorinated hydrocarbons are determined by monitoring the infrared emission of hydrogen chloride at 2653 cm(-1). Discussion is presented of the air/acetylene flame background, and the potential spectral interference from the emission of deuterated species. Practical detection limits for chloroform, carbon tetrachloride and methylene chloride in acetone, methanol, and ethanol are solvent independent and are found to be 1.1, 0.80, and 1.0%, respectively. Calibration curves for these three analytes are linear from their detection limits to approximately 55% (v/v). In addition, evidence is presented that flame flicker-noise does not lead to a multiplex disadvantage when the Fourier transform instrument is used for data acquisition.     

Preparation of dimethoxyborane and analysis by Fourier transform infrared spectroscopy

Dimethoxyborane was prepared by the reaction of trimethoxyboroxine, sodium borohydride and trimethyl borate in diethylene glycol dimethyl ether solvent at 70°C under atmospheric pressure followed by distillation to increase the purity and analyzed in liquid phase by FT-IR. The concentration of dimethoxyborane was identified by hydrolysis with water, which yields boric acid, methanol and hydrogen, whereas the generated hydrogen was analyzed by the mass detector of a volumetric flow apparatus. The FT-IR absorbance peak area showed a linear dependence on dimethoxyborane concentration in the wavenumber range 873 to 950 cm⁻¹ for samples with dimethoxyborane concentrations 0 to 6.2 wt% in trimethyl borate. Data fitting using the least square method gave an R ² value of 97%.     

Seafood freshness determination through vapour phase Fourier transform infrared spectroscopy

A new vapour-phase manifold has been developed to determine trimethylamine (TMA) in fish and cephalopod samples by Fourier transform infrared (FT-IR) spectroscopy. Samples were treated off-line for 1 h with trichloroacetic acid (TCA), filtered and washed. The obtained extracts were aspirated and alkalinized with NaOH 2.0 M, in an on-line system. TMA was separated from the solution in a gas phase separator and then transported by means of a nitrogen carrier into a home made 10 cm pathlength IR gas cell, where the corresponding FT-IR spectra were acquired by accumulating 30 scans per spectrum with 2 cm⁻¹ nominal resolution. The method was applied to the determination of TMA in natural samples providing concentration values statistically comparables with those obtained by a head space gas chromatography (HS-GC) reference procedure. The sample throughput by FT-IR is increased by a factor of 6 as compared with HS-GC.     

Complexation of polyacrylates by Ca2+ ions. Time-resolved studies using attenuated total reflectance Fourier transform infrared dialysis spectroscopy

The attenuated total reflectance Fourier transform infrared dialysis technique is introduced for the time-resolved investigation of the binding processes of Ca2+ to polyacrylates dissolved in water. We observed transient formation of intermediates in water with various types of coordination of the carboxylate group to Ca2+ throughout the complexation steps. Time-resolved changes in the spectra were analyzed with principal component analysis, from which the spectral species were obtained as well as their formation kinetics. We propose a model for the mechanisms of Ca2+ coordination to polyacrylates. The polymer chain length plays an important role in Ca2+ binding.     

Monitoring of the smoking process by multicommutation Fourier transform infrared spectroscopy

Nicotine was selected as the target molecule for monitoring of the smoking process by multicommutation Fourier Transform Infrared spectroscopy (FTIR). The method involved the use of CHCl₃ for on-line extraction of nicotine from tobacco, cigarette filters and tobacco ash from NH₄OH alkalinized samples, and absorbance measurement of the characteristic band at 1316 cm⁻¹ in the stopped-flow mode, by obtaining the peak area in the range between 1334 and 1300 cm⁻¹. Under the best operational conditions, the procedure developed provided a detection limit of 0.05 mg mL⁻¹ nicotine, corresponding to 0.5 mg g⁻¹ in the solid sample, a relative standard deviation less than 2.5%, and a sampling frequency of 12 determinations h⁻¹. It can be concluded that nicotine migrates in the smoke mainstream towards the filter during the smoking process. The smoking of cigarettes and cigars is different. Nicotine is retained weakly by both tobacco and filter in the case of cigarettes, and strongly by the unburned tobacco in cigars. The incomplete smoking of cigars and cigarettes reduces nicotine intake and thus reduces the additive effect.     

Study of tissue engineered bone nodules by Fourier transform infrared spectroscopy

The key criteria for assessing the success of bone tissue engineering are the quality and quantity of the produced minerals within the cultured constructs. The accumulation of calcium ions and inorganic phosphates in culture medium serves as nucleating agents for the formation of hydroxyapatite, which is the main inorganic component of bone. Bone nodule formation is one of the hallmarks of mineralization in such cell cultures. In this study, we developed a new two-step procedure to accelerate bone formation in which mouse bone cell aggregates were produced first on various chemically treated non-adhesive substrates. After this step, the bone cells' growth and mineralization were followed in conventional culture plates. The number and size of cell aggregates were studied with light microscopy. The minerals' formation in the form of nodules produced by the cell aggregates and the bone crystal quality were studied with Fourier Transform Infrared (FTIR) spectroscopy. The FTIR spectra of the ash specimens (mineral phase only) from thermal gravimetric analysis (TGA) provided valuable information of the quality of the minerals. The υ(4) PO(4) region (550-650 cm(-1)), which reveals apatitic and non-apatitic HPO(4) or PO(4) environments, and phosphate region (910-1180 cm(-1)) were examined for the minerals produced in the form of nodules. The peak position and intensity of the spectra demonstrate that the quality of the bone produced by cell aggregates, especially from the bigger ones, which were formed on Plunoric treated substrates, exhibit a composition more similar to that of native bone. This work establishes a new protocol for high quality bone formation and characterization, with the potential to be applied to bone tissue engineering.