Co－Mo／TiO_2和C0－M0／γ－Al_2O_3加氢脱硫催化剂的研究

本文考察了ＣｏＭｏ／ＴｉＯ３和ＣｏＭｏ／γ－Ａｌ２Ｏ３催化剂的加氢脱硫性能及表面结构变化和预处理条件对其活性的影响．担体ＴｉＯ２（Ａ）和ＴｉＯ２（Ｂ）分别采用ＴｉＣｌ４中和法和ＴｉＯＳＯ４水解法制备．结果表明，催化剂的活性顺序为ＣｏＭｏ／ＴｉＯ２（Ａ）＞ＣｏＭｏ／ＴｉＯ２（Ｂ）＞ＣｏＭｏ／γ－Ａｌ２Ｏ３催化剂的预处理条件对催化剂的加氢脱硫（ＨＤＳ）和加氢（ＨＹＤ）活性有很大影响，ＴｉＯ２担体上Ｍｏ物种主要以八面体配位构型存在，Ｍｏ６＋更易于还原成低价态．     

Cl2／TiCl4体系引发IBVE活性阳离子聚合的研究（Ⅰ）：引…

采用ＵＶ光谱法证明了ＩＢＶＥ／Ｃｌ２／ＴｉＣｌ４／甲苯聚合体系中同时存在着两种引发活性中心及络合竞争，研究了Ｃｌ２／ＴｉＣｌ４和Ｈ２Ｏ／ＴｉＣｌ４络合平衡，求出了２０℃时２ＴｉＣｌ４←Ｃｌ２和ＴｉＣｌ４←Ｈ２Ｏ络合平衡不稳定常数。     

TiO2纳米粒子膜表面性质的研究

ＴｉＯ_２纳米粒子膜在光催化降解大气和水中的污染物［１］、光电转换［２］、光致变色［３］等方面有广阔的应用前景,近年来受到了科学界的高度重视．研究表明,膜的表面性质对如上应用有着重要影响．本文采用等离子体化学气相沉积法（ＰＥＣＶＤ法）［４］制备了ＴｉＯ２的纳米粒子膜,分别采用ＴｉＣｌ４等离子体或Ｏ２等离子体处理膜表面,获得两种不同表面性质的ＴｉＯ２纳米粒子膜;并利用表面光电压谱（ＳＰＳ）和电场诱导表面光电压谱（ＥＦＩＳＰＳ）技术对膜的表面性质进行具体分析,探讨了其在光催化领域的可能应用．１实验部…     

SO(2-)4/Ti-Al-O固体超强酸的酸强度及催化性能

ＳＯ４＾２＾－／Ｔｉ－Ａｌ－Ｏ型固体超强度酸可用于邻苯二甲酸二辛酯（ＤＯＰ）的合成，当Ｔｉ／Ａｌ原子比为２时，催化性能优于ＳＯ４＾２＾－／ＴｉＯ２，且催化剂的制备条件对其酸强度，表面积和催化活性有较大的影响。使用ＴＰＤ技术对催化剂的酸强度分布进行了表征，发现在ＳＯ４＾２＾－／Ｔｉ－Ａｌ－Ｏ型固体超强度酸中，存在着三种酸中心（弱酸，中等强度酸和超强酸），中等强度的酸中心浓度与ＤＯＰ合成的催化活性有有     

Grignard试剂同6,6—二烷基富烯反应的研究

烯丙基卤化镁和环戊二烯基溴化镁同６，６－二烷基富烯分别进行富烯环外双键的加成和还原反庆，生成的取代环戊二烯基负离子用（ＣｐＴｉＣｌ２）２Ｏ（Ｃｐ＝环戊二烯基）或ＴｉＣｌ４配合，合成式为Ｃｐ（Ｃ６Ｈ４－ＣＲＲ＾１－ＣＨ２Ｃｈ－ＣＨ２）ＴｉＣｌ２和（Ｃ６Ｈ４ＣＨＲＲ＾１）２ＴｉＣｌ２的化合物，对烯丙基卤化镁、环戊二烯基溴化镁同富烯的反应机理进行了探讨。     

Co-Mo/TiO2和Co-Mo/γ-Al2O3加氢脱硫催化剂的研究

本文考察了ＣｏＭｏ／ＴｉＯ２和ＣｏＭｏ／γ－Ａｌ２Ｏ３催化剂的加氢脱硫性能及表面结构变化和处理条件对其活性的影响，担体ＴｉＯ２（Ａ）和ＴｉＯ２（Ｂ）分别采用ＴｉＯＳＯ４水解法制备，结果表明，催化剂的活性顺序为ＣｏＭｏ／ＴｉＯ２（Ａ）＞ＣｏＭｏ／ＴｉＯ２（Ｂ）＞ＣｏＭｏ／γ－Ａｌ２Ｏ３，催化剂的预处理条件对催化剂的加氢脱硫和加氢活性有很大影响，ＴｉＯ２担体上Ｍｏ物种主要以八面体配位构型存在，Ｍｏ＾－     

单茂钛催化剂的丙烯无规聚合反应及其动力学研究

比较了不同钛化合物／甲基铝氧烷（ＭＡＯ）催化体系的丙烯无规聚合，催化活性次序为ＣｐＴｉ（ＯＲ）３＞ＣｐＴｉ（ＯＰｈ）３＞ＣｐＴｉＣｌ３＞Ｃｐ２ＴｉＣｌ２＞Ｔｉ（ＯＢｕ）４＞ＴｉＣｌ４＞Ｔｉ（ＯＢｕ）２Ｃｌ２，所得聚丙烯用沸庚烷抽提８ｈ，溶解９５％以上，可溶部分经１３Ｃ ＮＭＲ、ＷＡＤＸ、ＦＴＩＲ等分析证明为无规聚丙烯（ａＰＰ），是没有结晶性的弹性体．ＧＰＣ测出其分子量Ｍｗ＝８．０～１０．０×１０４，Ｍｗ／Ｍｎ≈２．０．探索了催化体系ＣｐＴｉ（Ｏ ｎ Ｐｒ）３／ＭＡＯ中钛的浓度、［Ａｌ］／［Ｔｉ］摩尔比，丙烯聚合压力，聚合温度和时间对丙烯聚合反应的影响．研究了该催化体系丙烯聚合反应动力学规律，表观聚合反应速率对催化剂浓度和单体压力（浓度）都呈一级反应关系，表观聚合速率常数ＫＰ＝２９２×１０５ｍｏｌ／Ｌ·ｈ（４０℃）．活化能ΔＥ＝－７．８８×１０３Ｊ·ｍｏｌ－１，碰撞因子Ａ＝１．４１×１０－４ｍｏｌ／Ｌ·ｈ．     

Ce2O—TiO2／SiO2的制备及除氟性能研究

以ＳｉＯ２为基质，ＣｅＯ２ＴｉＯ２为包覆物质，采用溶胶凝胶法制备ＣｅＯ２ＴｉＯ２／ＳｉＯ２表面复合物，并对所制复合物进行除氟测试。用扫描电镜（ＳＥＭ）观察表面形貌，讨论实验环境、试剂用量等因素对ＣｅＯ２ＴｉＯ２／ＳｉＯ２制备及除氟性能的影响，结果表明：ｎＴｉ（ＯＣ４Ｈ９）４／ｎＣｅＣｌ３·７Ｈ２Ｏ＝１、ｎＣＨ３ＣＯＯＨ／ｎＴｉ（ＯＣ４Ｈ９）４＝４５、ｎＣ３Ｈ８Ｏ３／ｎＴｉ（Ｏ４Ｈ９）４＝０３、ＲＨ＝９５％，热处理温度１１０℃时，所制ＣｅＯ２ＴｉＯ２／ＳｉＯ２对Ｆ－的吸附容量（ｑ）为２１４ｍｇ／ｇ，去除率（Ｅ）为８５６％。     

硼掺杂多晶金刚石薄膜电极的电化学特性

用循环伏安法和恒电位法研究了硼掺杂多晶金刚石薄膜电极（ＤＦＥ）的若干电化学特性。电极面积４×４ｍｍ＾２。在０．１ｍｏｌ／Ｌ ＫＣｌ，ＮａＮＯ３，ＮａＯＨ和ＫＨ２ＰＯ４＋Ｎａ２ＨＰＯ４（ｐＨ＝６．８６）电解质溶液中电势窗口均为－５００￣＋８００ｍＶ；而在０．１ｍｏｌ／Ｌ ＨＣｌ和Ｈ２ＳＯ４溶液中电势窗口为－２００￣＋１１００ｍＶ．Ｋ３Ｆｅ（ＣＮ）６的氧化峰电位为＋５００ｍＶ，与Ｐｔ电极测量相同；校正     

CO在Ni／TiO2上的吸附成键及活化解离的量子化学研究

用ＳＣＣ－ＤＶ－Ｘ_α方法模拟研究了Ｎｉ／ＴｉＯ_２催化体系及ＣＯ在该体系上的吸附，结果表明，Ｎｉ沿金红石（１１０）面接近ＴｉＯ_３时，体系在Ｎｉ—Ｏ距离为０．１８ｎｍ处能量最低，这与实验结果一致。负载后的Ｎｉ与ＴｉＯ_２之间有较强的电子效应。金红石的中心Ｔｉ原子对体系催化性能无明显直接影响，但表面上与同Ｎｉ相联的Ｏ直接键合的Ｔｉ参与了金属→ＣＯ电子反馈作用，从而影响体系的催化性能。ＣＯ吸附于Ｎｉ／ＴｉＯ_２后，σ轨道失去电荷，π轨道得到电荷，但π轨道得到的电荷量大于σ轨道失去的电荷量，因此，ＣＯ的活化主要是通过催化体系的反馈作用完成的。△（１π—４σ）和△（５σ—４σ）更能体现ＣＯ的吸附强度。ＣＯ／Ｎｉ／ＴｉＯ_２中Ｃ—Ｎｉ相互作用比Ｎｉ原子簇及Ｎｉ／Ａｌ_２Ｏ_３吸附ＣＯ后的Ｃ—Ｎｉ作用要弱一些，因而催化活性更好。     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

Summary of development of the theory of stability of colloids and thin films

In this review, the research of the author in the field of colloidal systems is summarized. The factors influencing colloidal stability are systematized and analyzed. Examples are presented to illustrate the practical utilization of the theory of stability of colloids and thin films.This review was prepared on the basis of the works of the author, which were awarded the State Premium for 1991 in the field of science and technology, chemistry section.Institute of Physical Chemistry, Russian Academy of Sciences, 117915 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1708–1717, August, 1992.     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Thermodynamics of the formation of oxosulfides of rare-earth elements

The enthalpies of solution of several oxosulfides of rare-earth elements and the high-temperature enthalpies of oxosulfides and oxosulfates of lanthanum and yttrium were measured using solution calorimetry and high-temperature microcalorimetry techniques. Standard enthalpies of formation and some thermodynamic properties of oxosulfides and oxosulfates were calculated. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2 pp. 294–297, February, 1997.     

探究“铁的锈蚀条件”实验创新设计

设计了铁的锈蚀实验,说明了铁钉的处理方法,增加了温度、酸、碱的影响条件,实现了铁跟蒸馏水及空气中氧气快速反应而生锈,使实验在5 min左右就能够得到准确的结果。