Two Reaction Mechanisms via Iminium Ion Intermediates: The Different Reactivities of Diphenylprolinol Silyl Ether and Trifluoromethyl‐Substituted Diarylprolinol Silyl Ether

The reactions of α,β‐unsaturated aldehydes with cyclopentadiene in the presence of diarylprolinol silyl ethers as catalyst proceed via iminium cations as intermediates, and can be divided into two types; one involving a Michael‐type reaction (type A) and one involving a cycloaddition (type B). Diphenylprolinol silyl ethers and trifluoromethyl‐substituted diarylprolinol silyl ethers, which are widely used proline‐type organocatalysts, have been investigated in this study. As the LUMO of the iminium ion derived from trifluoromethyl‐substituted diarylprolinol silyl ether is lower in energy than that derived from diphenylprolinol silyl ether, as supported by ab initio calculations, the trifluoromethyl‐substituted catalyst is more reactive in a type B reaction. The iminium ion from an α,β‐unsaturated aldehyde is generated more quickly with diphenylprolinol silyl ether than with the trifluoromethyl‐substituted diarylprolinol silyl ether. When the generation of the iminium ion is the rate‐determining step, the diphenylprolinol silyl ether catalyst is the more reactive. Because acid accelerates the generation of iminium ions and reduces the generation of anionic nucleophiles in the Michael‐type reaction (type A), it is necessary to select the appropriate acid for specific reactions. In general, diphenylprolinol silyl ether is a superior catalyst for type A reactions, whereas the trifluoromethyl‐substituted diarylprolinol silyl ether catalyst is preferred for type B reactions.     

Synthesis and properties of polyfluoro(silyl)acetylene nanoparticles by reaction of fluoro(silyl)acetylenes with triethylamine

Fluoro(silyl)acetylenes, which were prepared by reaction of 1,1-difluoroethylene with silyl chlorides, reacted with triethylamine to give dark-brown colored polyfluoro(silyl)acetylene powders in excellent to moderate isolated yields. In contrast, the corresponding nonfluorinated acetylene was unable to react with triethylamine at all to afford poly(silyl)acetylene under similar conditions. Polyfluoro(silyl)acetylenes thus obtained were nanometer size-controlled cubic fine particles with a good dispersibility and stability in a variety of solvents. These polyfluoro(silyl)acetylene nanoparticles exhibited clear absorption and emission spectra related to the conjugated units in polymer main chain. Furthermore, these polyfluoro(silyl)acetylene nanoparticles were applied to the surface modification of poly(methyl methacrylate) [PMMA] film to exhibit a higher oleophobicity imparted by fluorine on their surface, compared to that on the reverse side.

Synthesis and reactivity of silyl vinylketenes: a formal interrupted Dötz benzannulation with unexpected silyl migration

[reaction: see text]. An efficient method for the generation of silyl vinylketenes from the thermal reaction of Fischer carbene complexes with silyl-substituted phenylacetylenes is described. Although the silyl vinylketene products are highly stable, conditions have been identified to induce a benzannulation/silyl migration process, providing aromatic silyl ethers.     

Lewis base activation of Lewis acids: catalytic, enantioselective addition of silyl ketene acetals to aldehydes

The concept of Lewis base activation of Lewis acids has been reduced to practice for catalysis of the aldol reaction of silyl ketene acetals and silyl dienol ethers with aldehydes. The weakly acidic species, silicon tetrachloride (SiCl4), can be activated by binding of a strongly Lewis basic chiral phosphoramide, leading to in situ formation of a chiral Lewis acid. This species has proven to be a competent catalyst for the aldol addition of acetate-, propanoate-, and isobutyrate-derived silyl ketene acetals to conjugated and nonconjugated aldehydes. Furthermore, vinylogous aldol reactions of silyl dienol ethers are also demonstrated. The high levels of regio-, anti diastereo-, and enantioselectivity observed in these reactions can be rationalized through consideration of an open transition structure where steric interactions between the silyl cation complex and the approaching nucleophile are dominant.     

Synthetic Studies on and Mechanistic Insight into [W(CO)5(L)]‐Catalyzed Stereoselective Construction of Functionalized Bicyclo[5.3.0]decane Frameworks

Stereoselective preparation of a variety of synthetically useful functionalized bicyclo[5.3.0]decane derivatives was achieved by tandem cyclization of 3‐siloxy‐1,3,9‐triene‐7‐yne derivatives based on the electrophilic activation of alkynes catalyzed by [W(CO)₅(L)]. The reaction proceeded smoothly under photoirradiation, and various substrates were cyclized to give the corresponding bicyclic compounds with up to four chiral centers stereospecifically. Reactions of siloxydienes with a silyl substituent as an equivalent of a hydroxyl group also proceeded with wide generality to afford silyl‐substituted bicyclo[5.3.0]decanes, which were highly useful as synthetic intermediates. Stereochemical studies concerning the silyl enol ether moiety suggested that two types of reaction pathway for the formation of seven‐membered rings were present. The reaction of (Z)‐enol silyl ethers proceeded through Cope rearrangement of cis‐divinylcyclopropane intermediates, and that of (E)‐enol silyl ethers by 1,4‐addition of the dienyl tungsten species at the position δ to the metal atom. In the reactions of siloxydiene derivatives with silyl substituents, all possible diastereomers could be synthesized stereoselectively by changing the geometry of the silyl enol ether and enyne moieties.     

New approaches toward the synthesis of (D-homo) steroid skeletons using Mukaiyama reactions

New, short, and flexible procedures have been developed for syntheses of steroid and D-homo steroid skeletons. A Mukaiyama reaction between the silyl enol ether of 6-methoxytetralone and 2-methyl-2-cyclopentenone or carvone, with transfer of the silyl group to the receiving enone, gave a second silyl enol ether. Addition of a carbocation, generated under Lewis acid conditions from 3-methoxy-2-butenol, 3-ethoxy-3-phenyl-2-propenol or 3-methoxy-2-propenol to this second silyl enol ether gave adducts, which could not be cyclized by aldol condensation to (D-homo) steroid skeletons. The Mukaiyama-Michael reaction of the silyl enol ether of 6-methoxy tetralone with 2-methyl-2-cylopentenone gave a second silyl enol ether, which reacted in high yield with a carbocation generated from 3-hydroxy-3-(4-methoxyphenyl)propene. Ozonolysis of the double bond in this adduct gave a tricarbonyl compound (Zieglers triketone), which has been used before in the synthesis of 9,11-dehydroestrone methyl ether. A second synthesis of C17 substituted CD-trans coupled (D-homo) steroid skeletons has been developed via addition of a carbocation, generated with ZnBr₂ from a Torgov reagent, to a silyl enol ether containing ring D precursor. The obtained seco steroids have been cyclized under formation of the 8-14 bond by treatment with acid. The double bonds in one of the cyclized products have been reduced to a C17-substituted all trans steroid skeleton.     

Peripherally Silylated Porphyrins

Silylation of peripherally lithiated porphyrins with silyl electrophiles has realized the first synthesis of a series of directly silyl‐substituted porphyrins. The meso‐silyl group underwent facile protodesilylation, whereas the β‐silyl group was entirely compatible with standard work‐up and purification on silica gel. The meso‐silyl group caused larger substituent effects to the porphyrin compared with the β‐silyl group. Silylation of β‐lithiated porphyrins with 1,2‐dichlorodisilane furnished β‐to‐β disilane‐bridged porphyrin dimers. A doubly β‐to‐β disilane‐bridged Ni^II‐porphyrin dimer was also synthesized from a β,β‐dilithiated Ni^II‐porphyrin and characterized by X‐ray crystallographic analysis to take a steplike structure favorable for interporphyrinic interaction. Denickelation of β‐silylporphyrins was achieved upon treatment with a 4‐tolylmagnesium bromide to yield the corresponding freebase porphyrins.     

Novel sequential 1,4-Brook rearrangement-Wittig reaction: new one-pot approach for silyl dienol ethers

A novel one-pot synthetic method of silyl dienol ethers via 1,4-Brook rearrangement-Wittig reaction sequence has been developed. This tandem reaction proceeded via the intramolecular silyl migration step, which enabled stereoselective formation of phosphorane intermediates. The reaction is operationally simple and high yielding, thus providing a new useful formula for silyl dienol ether synthesis.     

A mild and efficient method for the selective deprotection of silyl ethers using KF in the presence of tetraethylene glycol

A mild and efficient protocol for the deprotection of silyl ethers using KF in tetraethylene glycol is reported. A wide range of alcoholic silyl ethers can be selectively cleaved in high yield in the presence of certain acid- and base-labile functional groups. Moreover, the phenolic silyl ethers were cleaved exclusively, without affecting the alcoholic silyl ethers, at room temperature.     

A Theoretical and Experimental Study of the Effects of Silyl Substituents in Enantioselective Reactions Catalyzed by Diphenylprolinol Silyl Ether

The effect of silyl substituents in diphenylprolinol silyl ether catalysts was investigated. Mechanistically, reactions catalyzed by diphenylprolinol silyl ether can be categorized into three types: two that involve an iminium ion intermediate, such as for the Michael‐type reaction (type A) and the cycloaddition reaction (type B), and one that proceeds via an enamine intermediate (type C). In the Michael‐type reaction via iminium ions (type A), excellent enantioselectivity is realized when the catalyst with a bulky silyl moiety is employed, in which efficient shielding of a diastereotopic face of the iminium ion is directed by the bulky silyl moiety. In the cycloaddition reaction of iminium ions (type B) and reactions via enamines (type C), excellent enantioselectivity is obtained even when the silyl group is less bulky and, in this case, too much bulk reduces the reaction rate. In other cases, the yield increases when diphenylprolinol silyl ethers with bulky substituents are employed, presumably by suppressing side reactions between the nucleophilic catalyst and the reagent. The conformational behaviors of the iminium and enamine species have been determined by theoretical calculations. These data explain the effect of the bulkiness of the silyl substituent on the enantioselectivity and reactivity of the catalysts.     

Chiral Zinc(II)‐Catalyzed Enantioselective Tandem α‐Alkenyl Addition/Proton Shift Reaction of Silyl Enol Ethers with Ketimines

A new catalytic asymmetric tandem α‐alkenyl addition/proton shift reaction of silyl enol ethers with ketimines was serendipitously discovered in the presence of chiral N,N′‐dioxide/Zn^II complexes. The proton shift preferentially proceeded instead of a silyl shift after α‐alkenyl addition of silyl enol ether to the ketimine. A wide range of β‐amino silyl enol ethers were synthesized in high yields with good to excellent ee values. Control experiments suggest that the Mukaiyama–Mannich reaction and tandem α‐alkenyl addition/proton shift reaction are competitive reactions in the current catalytic system. The obtained β‐amino silyl enol ethers were easily transformed into β‐fluoroamines containing two vicinal tetrasubstituted carbon centers.     

Benzhydryldimethylsilyl allylic silanes: syntheses and applications to

A new silyl group, the benzhydryldimethylsilyl group, has been developed that is easily synthesized and that undergoes facile oxidation. The [3 + 2] annulation reactions of allylic silanes with this silyl group provide a variety of highly substituted five-membered carbocycles and heterocycles with high stereoselectivities. The silyl groups of these cyclic compounds have been oxidized to hydroxyl groups to demonstrate the general synthetic utility of the method.     

Crucial role of the ligand of silyl Lewis acid in the Mukaiyama aldol reaction

The Me3SiX-induced Mukaiyama aldol reaction proceeds through each catalytic cycle under the influence of X-: the silyl group of Me3SiNTf2 does not release from -NTf2 and that of silyl enol ether intermolecularly transfers to the product, while the silyl group of Me3SiOTf remains in the product and that of the silyl enol ether becomes the catalyst for the next catalytic cycle.     

Origins of aryl substituent effects on the stereoselectivities of additions of silyl enol ethers to a chiral oxazolinium ion

Density functional theory calculations are reported that reveal the role of aromatic interactions in the additions of aryl-substituted silyl enol ethers to a chiral oxazolinium ion. Aryl-substituted silyl enol ethers give the opposite diastereomer of the adduct than do aliphatic silyl enol ethers, due to a combination of attractive cation-π and CH-π interactions, reduced steric repulsion, and lower torsional strain in the more "crowded" transition state.     

The chemoselective and efficient deprotection of silyl ethers using trimethylsilyl bromide

An efficient and chemoselective cleavage of silyl ethers (primary, secondary and aromatic) by using catalytic quantities of trimethylsilyl bromide (TMSBr) in methanol is reported. A wide range of alkyl silyl ethers such as TBS, TIPS, and TBDPS can be chemoselectively cleaved in high yield in the presence of aryl silyl ethers. The deprotection of silyl esters was also achieved employing catalytic quantities of TMSBr.     

A novel synthesis of silyl enol ethers from α-silylbenzylthiols and carboxylic acid derivatives via C---C bond formation; thermal rearrangement of S-α-silylbenzyl thioesters

A new procedure for the synthesis of silyl enol ethers from S-α-silylbenzyl thioesters without need for either bases or catalysts via C---C bond formation is described. Solutions of S-α-silylbenzyl thioesters were simply heated at 180°C for 24 h in a sealed tube to give silyl enol ethers in good yields with high stereoselectivity. Cyclization of the dipoles generated by thermal rearrangement of the silyl group and elimination of sulfur afforded silyl enol ethers.     

Isolable silyl and germyl radicals lacking conjugation with pi-bonds: synthesis,characterization, and reactivity

The one-electron oxidation reaction of tris[di-tert-butyl(methyl)silyl]silyl and -germyl anions with dichlorogermylene-dioxane complex results in the formation of stable tris[di-tert-butyl(methyl)silyl]silyl and -germyl radicals 1 and 2, representing the first isolable radical species of heavier Group 14 elements lacking stabilization by conjugation with pi-bonds. The crystal structures of both silyl and germyl radicals 1 and 2 showed a completely planar geometry around the radical centers. The ESR spectra of 1 and 2 showed strong signals with characteristic satellites due to the coupling with the 29Si and 73Ge nuclei. The small values of the hyperfine coupling constants a(29Si) and a(73Ge) clearly indicate the pi-character of both radicals, corresponding to a planar geometry and sp2 hybridization of the radical centers. Both 1 and 2 easily undergo halogenation reactions with carbon tetrachloride, 1,2-dibromoethane, and benzyl bromide to form the corresponding halosilanes and halogermanes.     

New ferrocene-containing structures: Poly(silyl ester)s

Two new polymeric structures containing ferrocene units along the chains, namely poly(silyl ester)s, have been synthesized and characterized: a geminal poly(silyl ester) (g-PSE) and one having a disiloxane spacer between the silyl ester groups (s-PSE). The condensation polymerization of AA/BB monomer systems in solution was used in both cases as preparation method involving a silicon-containing diol, (diphenylsilane diol or 1,3-bis(hydroxy)-tetramethyldisiloxane), and 1,1′-di(chlorocarbonyl)ferrocene. The polymers were investigated by differential pulse voltammetry in order to evaluate the redox behavior. Due to the presence of the silyl ester groups in the chain, these polymers are hydrolytically degradable.     

Reactions of novel mono- and difluoroacetyltrialkylsilanes with sulfur and phosphorus ylides

The reactions of difluoroacetyltrialkylsilanes with methylidene triphenylphosphorane and benzylidene triphenylphosphorane are affected by the nature of the silyl substituents giving either the enol silyl ether or normal Wittig product exclusively, or mixture of both. Reactions with Horner-Emmons type ylide gave only the alkene products. Reactions of mono- and difluoroacetyltrialkylsilanes with dimethylsulfoxonium methylide gave the enol silyl ether products exclusively. Conversion of an enol silyl ether to an epoxide was effected with m-CPBA.     

Organosilicon synthesis of isocyanates: II. Synthesis of aliphatic, carbocyclic, and fatty-aromatic isocyanates

Silylation of a series of aliphatic, carbocyclic, and fatty-aromatic amines gave the corresponding silyl derivatives whose yield depended on the electronic and steric structure of the substrate and the nature of the silylating agent. The yield of isocyanates obtained by phosgenation of the silyl derivatives under mild conditions decreased in going from aliphatic amines to benzylamines and rose as the length of the alkyl chain in fatty-aromatic amines extended. The most convenient procedure for the synthesis of low-boiling alkyl isocyanates was found to be based on the transformation of amines or ammonium salts into silyl or silyl silyl-carabamates, followed by pyrolysis of the latter in the presence of trichloro(phenyl)silane.