The Effect of wake Turbulence Intensity on Transition in a Compressor Cascade

Direct numerical simulations of separating flow along a section at midspan of a low-pressure V103 compressor cascade with periodically incoming wakes were performed. By varying the strength of the wake, its influence on both boundary layer separation and bypass transition were examined. Due to the presence of small-scale three-dimensional fluctuations in the wakes, the flow along the pressure surface undergoes bypass transition. Only in the weak-wake case, the boundary layer reaches a nearly-separated state between impinging wakes. In all simulations, the flow along the suction surface was found to separate. In the simulation with the strong wakes, separation is intermittently suppressed as the periodically passing wakes managed to trigger turbulent spots upstream of the location of separation. As these turbulent spots convect downstream, they locally suppress separation.     

Spectral-based simulations of particle-laden turbulent flows

In this paper, we discuss the application of spectral-based methods to simulation of particle-laden turbulent flows. The primary focus of the article is on the past and ongoing works by the authors. The particles are tracked in Lagrangian framework, while direct numerical simulation (DNS) or large-eddy simulation (LES) is used to describe the carrier-phase flow field. Two different spectral methods are considered, namely Fourier pseudo-spectral method and Chebyshev multidomain spectral method. The pseudo-spectral method is used for the simulation of homogeneous turbulence. DNS of both incompressible and compressible flows with one- and two-way couplings are reported. For LES of particle-laden flows, two new models, developed by the authors, account for the effect of sub-grid fluctuations on the dispersed phase. The Chebyshev multidomain method is employed for the works on inhomogeneous flows. A number of canonical flows are discussed, including flow past a square cylinder, channel flow and flow over backward-facing step. Ongoing research on particle-laden LES of inhomogeneous flows is briefly reported.     

Direct Computations of Boundary Layers Distorted by Migrating Wakes in a Linear Compressor Cascade

A Direct Numerical Simulation (DNS) of flow in the V103 Low-Pressure (LP) compressor cascade with incoming wakes was performed. The computational geometry was chosen largely in accordance with the setup of the experiments performed by Hilgenfeld and Pfitzner (J Turbomach 126:493–500, 2004) at the University of the Armed Forces in Munich. The computations were carried out on the NEC-SX8 in Stuttgart using 64 processors and 85 million grid points. The incoming wakes stemmed from a separate DNS of incompressible flow around a circular cylinder with a Reynolds number of Re _d  = 3300 (based on mean inflow velocity and cylinder diameter). The boundary layer along the suction surface of the blade was found to separate and roll up due to a Kelvin–Helmholtz instability triggered by the periodically passing wakes. Inside the rolls further transition to turbulence was found to occur. The boundary-layer flow along the pressure surface did not separate, instead it underwent by-pass transition.     

A reformulated synthetic turbulence generation method for a zonal RANS–LES method and its application to zero-pressure gradient boundary layers

A synthetic turbulence generation (STG) method for subsonic and supersonic flows at low and moderate Reynolds numbers to provide inflow distributions of zonal Reynolds-averaged Navier–Stokes (RANS) – large-eddy simulation (LES) methods is presented. The STG method splits the LES inflow region into three planes where a local velocity signal is decomposed from the turbulent flow properties of the upstream RANS solution. Based on the wall-normal position and the local flow Reynolds number, specific length and velocity scales with different vorticity content are imposed at the inlet plane of the boundary layer. The quality of the STG method for incompressible and compressible zero-pressure gradient boundary layers is shown by comparing the zonal RANS–LES data with pure LES, pure RANS, and direct numerical simulation (DNS) solutions. The distributions of the time and spanwise wall-shear stress, Reynolds stress distributions, and two point correlations of the zonal RANS–LES simulations are smooth in the transition region and in good agreement with the pure LES and reference DNS findings. The STG approach reduces the RANS-to-LES transition length to less than four boundary-layer thicknesses.     

LES-based filter-matrix lattice Boltzmann model for simulating fully developed turbulent channel flow

In this paper, a three-dimensional filter-matrix lattice Boltzmann (FMLB) model based on large eddy simulation (LES) was verified for simulating wall-bounded turbulent flows. The Vreman subgrid-scale model was employed in the present FMLB–LES framework, which had been proved to be capable of predicting turbulent near-wall region accurately. The fully developed turbulent channel flows were performed at a friction Reynolds number Re_τ of 180. The turbulence statistics computed from the present FMLB–LES simulations, including mean stream velocity profile, Reynolds stress profile and root-mean-square velocity fluctuations greed well with the LES results of multiple-relaxation-time (MRT) LB model, and some discrepancies in comparison with those direct numerical simulation (DNS) data of Kim et al. was also observed due to the relatively low grid resolution. Moreover, to investigate the influence of grid resolution on the present LES simulation, a DNS simulation on a finer gird was also implemented by present FMLB–D3Q19 model. Comparisons of detailed computed various turbulence statistics with available benchmark data of DNS showed quite well agreement.     

Validation of a novel very large eddy simulation method for simulation of turbulent separated flow

The paper describes the validation of a newly developed very LES (VLES) method for the simulation of turbulent separated flow. The new VLES method is a unified simulation approach that can change seamlessly from Reynolds‐averaged Navier–Stokes to DNS depending on the numerical resolution. Four complex test cases are selected to validate the performance of the new method, that is, the flow past a square cylinder at Re = 3000 confined in a channel (with a blockage ratio of 20%), the turbulent flow over a circular cylinder at Re = 3900 as well as Re = 140,000, and a turbulent backward‐facing step flow with a thick incoming boundary layer at Re = 40,000. The simulation results are compared with available experimental, LES, and detached eddy simulation‐type results. The new VLES model performs well overall, and the predictions are satisfactory compared with previous experimental and numerical results. It is observed that the new VLES method is quite efficient for the turbulent flow simulations; that is, good predictions can be obtained using a quite coarse mesh compared with the previous LES method. Discussions of the implementation of the present VLES modeling are also conducted on the basis of the simulations of turbulent channel flow up to high Reynolds number of Re_τ = 4000. The efficiency of the present VLES modeling is also observed in the channel flow simulation. From a practical point of view, this new method has considerable potential for more complex turbulent flow simulations at relative high Reynolds numbers. Copyright © 2013 John Wiley & Sons, Ltd.     

On the use of a two-layer model for large-eddy simulations of supersonic boundary layers with separation

The two-layer modeling approach has become one of the most promising and successful methodology for simulating turbulent boundary layers in the past ten years. In the present study, a mixed wall model for large-eddy simulations (LES) of high-speed flows is proposed which combine two approaches; the thin-Boundary Layer Equations (TBLE) model of Kawai and Larsson (1994) and the analytical wall-layer model of Duprat et al. (2011) for streamwise pressure gradients. The new hybrid model has been efficiently implemented into a three-dimensional compressible LES solver and validated against DNS of a spatially-evolving supersonic boundary layer (BL) under moderate and strong pressure gradients, before being employed for the prediction of nozzle flow separations at different flow conditions, ranging from weakly to highly over-expanded regimes. A good agreement is obtained in terms of mean and fluctuating quantities compared to the DNS results. Particularly, the current wall-modeled LES results are found to perfectly match the DNS data of supersonic BL with/out pressure gradient. It is also shown that the model can account for the effect of the large-scale turbulent motions of the outer layer, indicating a good interaction between the inner and the outer part of the wall layer. In terms of simulations costs and improvements of computing power, the obtained results highlight the capability of the current wall-modeling LES strategy in saving a considerable amount of computational time compared to the wall-resolved LES counterpart, allowing to push further the simulations limits. Furthermore, the application of these computationally low-costly LES simulations to nozzle flow separation allows to clearly identify the origin of the shock unsteadiness, and the existence of broadband and energetically-significant low-frequency oscillations (LFO) in the vicinity of the separation region.     

Numerical Investigation of Unsteady Transitional Flows in Turbomachinery Components Based on a RANS Approach

This paper presents results of the numerical simulation of periodically unsteady flows with focus on turbomachinery applications. The unsteady CFD solver used for the simulations is based on the Reynolds averaged Navier–Stokes equations. The numerical scheme applies an extended version of the Spalart–Allmaras one-equation turbulence model coupled with a transition correlation. The first example of validation consists of boundary layer flow with separation bubble on a flat plate, both under steady and periodically unsteady main flow conditions. The investigation includes a variation of the major parameters Strouhal number, amplitude, and Reynolds number. The second, more complex test case consists of the flow through a cascade of turbine blades which is influenced by wakes periodically passing over the cascade. The computations were carried out for two different blade loadings. The results of the numerical simulations are discussed and compared with experimental data in detail. Special emphasis is given to the investigation of boundary layers with regard to transition, separation and reattachment under the influence of main flow unsteadiness. This revised version was published online in July 2006 with corrections to the Cover Date.     

High‐order stable interpolations for immersed boundary methods

The analysis and improvement of an immersed boundary method (IBM) for simulating turbulent flows over complex geometries are presented. Direct forcing is employed. It consists in interpolating boundary conditions from the solid body to the Cartesian mesh on which the computation is performed. Lagrange and least squares high‐order interpolations are considered. The direct forcing IBM is implemented in an incompressible finite volume Navier–Stokes solver for direct numerical simulations (DNS) and large eddy simulations (LES) on staggered grids. An algorithm to identify the body and construct the interpolation schemes for arbitrarily complex geometries consisting of triangular elements is presented. A matrix stability analysis of both interpolation schemes demonstrates the superiority of least squares interpolation over Lagrange interpolation in terms of stability. Preservation of time and space accuracy of the original solver is proven with the laminar two‐dimensional Taylor–Couette flow. Finally, practicability of the method for simulating complex flows is demonstrated with the computation of the fully turbulent three‐dimensional flow in an air‐conditioning exhaust pipe. Copyright © 2006 John Wiley & Sons, Ltd.     

Persistent Non-Homogeneous Features in Periodic Channel-Flow Simulations

Time-resolved simulations of simple shear flows, such as boundary layers and channel flows, are often used as precursor simulations that provide the inflow-boundary conditions for simulations of turbulent flows in and around more complex geometries. For both the precursor and main simulations, the accuracy of the calculated mean flow relies on the simulations being run for long enough to contain the full spectrum of turbulent processes, resulting in a physically valid statistical representation. The time scale needed to achieve convergence of statistics from fundamental studies of simple shear flows is based on data that is averaged in spatial directions in which the flow geometry is invariant—i.e. directions in which homogeneity is expected to be the limiting case. This paper reports and discusses features that represent significant departures from spatial homogeneity of the flow in such a direction, that persist on this time scale, thereby limiting the spatial uniformity of a simulated turbulent inflow. The persistence and size of the features is quantified. A range of simulations for different combinations of domain dimensions and flow parameters has been performed with two independent codes (DNS and LES) to explore how the persistence and size are controlled. While no definitive physical mechanism has been identified, it is suggested that the features may be related to experimental observations of persistent structures in wall-bounded flows.     

An advanced switching parameter for a hybrid LES/RANS model considering the characteristics of near-wall turbulent length scales

In this study, we proposed an idea for an advanced switching parameter used in a hybrid approach connecting large eddy simulation (LES) with Reynolds-averaged Navier–Stokes modeling [the hybrid LES/RANS (HLR) model]. Although the HLR model is promising way to predict engineering turbulent flows, an important problem is that RANS is always adopted in the near-wall region, even if the grid resolution is fine enough for LES. To overcome this difficulty, the switching parameter proposed here introduced knowledge of the Kolmogorov microscale that is thought to be reasonable for representing the near-wall turbulence. This parameter enabled the present HLR model to be smoothly replaced by a full LES if a grid resolution was fine enough in the near-wall region. To confirm model performance, the present HLR model was applied to numerical simulations of a periodic hill flow as well as fundamental plane channel flows. The model generally provided reasonable predictions for these test cases that include complex turbulence with massive flow separation.     

The effect of inflow conditions on the transition to turbulence in large eddy simulations of spatially developing mixing layers

Large Eddy Simulations (LES) of spatially developing turbulent mixing layers have been performed for flows of uniform density and Reynolds numbers of up to 50,000 based on the visual thickness of the layer and the velocity difference across it. On a fine LES grid, a validation simulation performed with a hyperbolic tangent inflow profile produces flow statistics that compare extremely well with reference Direct Numerical Simulation (DNS) data. An inflow profile derived from laminar Blasius profiles produces a flow that is significantly different to the reference DNS, particularly with respect to the initial development of the flow. When compared with experimental data, however, it is the boundary layer-type inflow simulation produces the better prediction of the flow statistics, including the mean transition location. It is found that the boundary layer inflow condition is more unstable than the hyperbolic tangent inlet profile. A suitably designed coarse LES grid produces good predictions of the mean transition location with boundary layer inflow conditions at a low computational cost. The results suggest that hyperbolic tangent functions may produce unreliable DNS data when used as the initial condition for studies of the transition in the mixing layer flow.     

DNS of Fractal-Generated Turbulence

An innovative approach which combines high order compact schemes, Immersed Boundary Method and an efficient domain decomposition method is used to perform high fidelity Direct Numerical Simulations (DNS) of four spatially evolving turbulent flows, one generated by a regular grid and three generated by fractal square grids. The main results which we have been able to obtain from these simulations are the following: the vorticity field appears more clustered when generated by fractal square grids compared to a regular grid; fractal square grids generate higher vorticities and turbulence intensities than a regular grid; the flow holds clear geometrical imprints of the fractal grids far downstream, a property which could be used in the future for flow design, management and passive control; the DNS obtained with fractal grids confirmed the existence of two turbulent regions, one where the turbulence progressively amplifies closer to the grid (the production region) followed by one where the turbulence decays; the energy spectra of fluctuating turbulent velocities at various locations in the production region of the flow provide some information on how the turbulence is generated at the smallest scales first near the grid where the smallest wakes are dominant, followed by progressively smaller turbulent frequencies further downstream where progressively larger wakes interact.     

Large eddy simulation of gas-particle turbulent channel flow with momentum exchange between the phases

This paper presents results of a large eddy simulation (LES) combined with Lagrangian particle tracking and a point-force approximation for the feedback effect of particles on the downward turbulent gaseous flow in a vertical channel. The LES predictions are compared with the results obtained by direct numerical simulation (DNS) of a finer computational mesh. A parametric study is conducted for particles with two response times in simulations with and without streamwise gravitational settling and elastic, binary interparticle collisions. It is shown that the classical and the dynamic Smagorinsky turbulence models adequately predict the particle-induced changes in the mean streamwise velocity and the Reynolds stresses of the carrier phase for the range of parameters studied. However, the largest discrepancies between the LES and DNS results are found in the cases of particle-laden flows. Conditional sampling of the instantaneous resolved flow fields indicates that the mechanisms by which particles directly oppose the production of momentum and vorticity of the organized fluid motions are also observed in the LES results. However, the geometric features of the near-wall quasistreamwise vortices are overestimated by the use of both turbulence models compared to the DNS predictions.     

An efficient very large eddy simulation model for simulation of turbulent flow

Among the various hybrid methodologies, Speziale's very large eddy simulation (VLES) is one that was proposed very early. It is a unified simulation approach that can change seamlessly from Reynolds Averaged Navier–Stokes (RANS) to direct numerical simulation (DNS) depending on the numerical resolution. The present study proposes a new improved variant of the original VLES model. The advantages are achieved in two ways: (i) RANS simulation can be recovered near the wall which is similar to the detached eddy simulation concept; (ii) a LES subgrid scale model can be reached by the introduction of a third length scale, that is, the integral turbulence length scale. Thus, the new model can provide a proper LES mode between the RANS and DNS limits. This new methodology is implemented in the standard k ? ? model. Applications are conducted for the turbulent channel flow at Reynolds number of Re_τ = 395, periodic hill flow at Re = 10,595, and turbulent flow past a square cylinder at Re = 22,000. In comparison with the available experimental data, DNS or LES, the new VLES model produces better predictions than the original VLES model. Furthermore, it is demonstrated that the new method is quite efficient in resolving the large flow structures and can give satisfactory predictions on a coarse mesh. Copyright © 2012 John Wiley & Sons, Ltd.     

Hybrid LES-RANS: An approach to make LES applicable at high Reynolds number

The main bottle neck for using large eddy simulations (LES) at high Reynolds number is the requirement of very fine meshes near walls. Hybrid LES-Reynolds-averaged Navier-Stokes (RANS) was invented to get rid of this limitation. In this method, unsteady RANS (URANS) is used near walls and away from walls LES is used. The matching between URANS and LES takes place in the inner log-region. In the present paper, a method to improve standard LES-RANS is evaluated. The improvement consists of adding instantaneous turbulent fluctuations (forcing conditions) at the matching plane in order to provide the equations in the LES region with relevant turbulent structures. The fluctuations are taken from a DNS of a generic boundary layer. Simulations of fully developed channel flow and plane asymmetric diffuser flow are presented. Hybrid LES-RANS is used both with and without forcing conditions.     

Evaluation of an algebraic model for laminar-to-turbulent transition on secondary flow loss in a low-pressure turbine cascade with an endwall

The predictive qualities of a recently developed algebraic intermittency model for laminar-to-turbulent transition are analysed for the flow through a linear cascade of low-pressure turbine blades with an endwall. Both steady RANS (Reynolds-averaged Navier–Stokes) and time-accurate RANS (URANS) simulations are performed. The results are compared with reference LES (Large Eddy Simulation) by Cui et al. (2017, Numerical investigation of secondary flows in a high-lift low pressure turbine, Int. J. of Heat and Fluid Flow, vol. 63) and results by the local correlation-based intermittency transport model (LCTM) by Menter et al. (2015, A one-equation local correlation-based transition model. Flow Turbul. Combust., vol. 95) for laminar and turbulent endwall boundary layers at the cascade entrance. Good agreement is obtained with the reference LES and with results by the LCTM for the evolution through the cascade of the mass-averaged total pressure loss coefficient and for profiles of pitchwise-averaged total pressure loss coefficient at the cascade exit.     

Direct numerical simulation of fluid flow in a 5x5 square rod bundle

Characterization of parallel flow through rod bundles is of key importance in assessing the performance and safety of several engineering systems, including a majority of nuclear reactor concepts. Inhomogeneities in the bundle cross-section can present complex flow phenomena, including varying local conditions of turbulence. With the ever-increasing capabilities of high-performance computing, Direct Numerical Simulation (DNS) of turbulent flows is becoming more feasible. Through resolving all scales of turbulence, DNS can serve as a “numerical experiment,” and can provide substantial insight into flow physics, but at considerable computational cost. Thus to date, the DNS in open literature for rod bundle flows is relatively scarce, and largely limited to unit-cell domains. Since wall effects are important in rod bundle flows, a multiple-pin DNS study can expand understanding of rod bundle flows while providing valuable reference data for evaluating reduced-resolution techniques. In this work, DNS of a 5x5 square bare rod bundle representative of typical light water reactor fuel dimensions was performed using the spectral element code Nek5000. Turbulent microscales based on an advanced Reynolds-Averaged Navier–Stokes model were used to establish the required DNS resolution. Velocity and Reynolds stress fields are analyzed in detail, and invariant analysis is used for further investigation into flow physics. The results show stark changes in the structure of turbulence in the edge gaps, suggesting the presence of gap vortices in these regions. In addition, turbulent kinetic energy budgets are presented to more fully illustrate the various turbulent processes. These data can prove useful for rigorous evaluation of lower-fidelity turbulence modeling approaches.     

Simulation of Three-Dimensional Bluff-Body Flows Using the Vortex Particle and Boundary Element Methods

Recent contributions to the 3-D vortex method for bluff-body flows are presented. The numerical method--a vortex method combined with a boundary element method--is briefy reviewed. It is applied to direct numerical simulation (DNS) of the flow past a sphere (Re= 300, 500 and 1000). The on-going work to extend the method towards vortex-based large-eddy simulation (LES) for high Reynolds number flows is also presented. Preliminary results for the flow past a hemisphere are discussed.     

Comparative Study of DNS,LES and Hybrid LES/RANS of Turbulent Boundary Layer with Heat Transfer Over 2d Hill

This paper first presents the turbulent heat transfer phenomenon of the boundary layer over a 2-dimensional hill using the direct numerical simulation (DNS). DNS results reveal turbulent heat transfer phenomena in the boundary layer over a 2-dimensional hill affected by the flow acceleration and the concave wall at the foreface of a hill, the convex wall at the top of the hill, and the flow deceleration, separation, and reattachment and the concave wall at the back of the hill. The prediction of turbulent heat transfer, the turbulence models of LES and HLR should be assessed in such heat transfer because these models have seldom been evaluated in the complex turbulent heat transfer. Therefore, this paper also presents evaluations of predictions of LES and HLR in the complicated turbulent heat transfer which is the boundary layer with heat transfer over a 2-dimensional hill. Consequently, this paper obviously shows the detailed turbulent heat transfer phenomena of a boundary layer over a 2-dimensional hill via DNS, and the evaluation results of prediction accuracy of LES and HLR for the heat transfer. LES and HLR give good prediction in comparison with DNS results, but the predicted reattachment and separation points are slightly different from DNS.