Transport processes in heavy metal fluoride glasses

Na self-diffusion, Li self-diffusion, Na⁺–Li⁺ ion exchange, electrical conductivity, and mechanical relaxation have been studied below T_g on glasses of the system ZrF₄–BaF₂–LaF₃–AF (A=Na, Li), with A=10, 20, 30 mol%. Compared to the transport mechanism in alkali-containing silicate glasses, the mechanisms in these non-oxide glasses are anomalous. Thus the self-diffusion coefficient of Na decreases with increasing NaF content, whereas that of Li increases with increasing LiF content. Both the electrical conductivity and the Na⁺–Li⁺ ion exchange reach a minimum at ≈ 20 mol% LiF, and the mechanical relaxation shows one peak for the 20 and 30 mol% LiF-glasses and two peaks for the glass with 10 mol% LiF, evidencing both a contribution of F⁻ and Li⁺ ions to the transport. Moreover, the presence of the three partially interacting mobile species F⁻, Na⁺, Li⁺ obviously leads to an anionic–cationic mixed ion effect. Applying the Nernst–Einstein equation to the Li⁺ transport in LiF-containing glasses shows that its mechanism is dissimilar to that in oxide glasses. Calculated short jump distances possibly can be interpreted as an Li⁺ movement via energetically suitable sites near F⁻ ions. Likewise the Nernst–Planck model, successfully applied to the ionic transport in mixed alkali silicate glasses, obviously does also not hold for the present heavy metal fluoride glasses.     

Structural and electrochemical properties of layered lithium nitridocuprates Li3 − xCuxN

We report a systematic study of the layered lithium nitridocuprates Li_3 ? xCu_xN with 0.1 ≤ x ≤ 0.39. The structural data obtained from experimental XRD patterns, Rietveld refinements and unit cell parameters calculation vs x, indicate that copper (I) substitute interlayer lithium ions in the parent nitride Li₃N to form the Li_3 ? xCu_xN compound without any Li vacancy in the Li₂N^? layer. Electrochemical results report Li insertion into the corresponding layered structures cannot take place in the 1.2/0.02 V voltage range as in the case of lithium into nitridonickelates and nitridocobaltates. However, in the initial charge process of Li_3 ? xCu_xN at 1.4 V leading to a specific capacity higher than 1000 mA h/g, the oxidation of copper and nitride ions is probably involved inducing a strong structural disordering process. As a consequence a new rechargeable electrochemical system characterized by discharge–charge potential of ≈ 0.3 V/1.2 V appears from the second cycle. Cycling experiments 0.02 V voltage/0.02 V range induce a complete destruction of the layered host lattice and the presence of Cu₃N in the charge state suggests a conversion reaction. The capacity recovered in the 1.4/0.02 V range practically stabilizes around 500 mA h/g after 20 cycles.     

Study on ionic conductivity of polymer electrolyte plasticized with PEG–aluminate ester for rechargeable lithium ion battery

We have synthesized poly(ethylene glycol) (PEG)-aluminate ester as a plasticizer for solid polymer electrolytes. The thermal stability, ionic conductivity and electrochemical stability of the polymer electrolyte which consist of poly(ethylene oxide) (PEO)-based copolymer, PEG–aluminate ester and lithium bis-trifluoromethanesulfonimide (LiTFSI) were investigated. Addition of PEG–aluminate ester increased the ionic conductivity of the polymer electrolyte, showing greater than 10^− 4 S cm^− 1 at 30 °C. The polymer electrolyte containing PEG–aluminate ester retained thermal stability of the non-additive polymer electrolyte and exhibited electrochemical stability up to 4.5 V vs. Li⁺/Li at 30 °C.     

The preparation and characterization of olivine LiFePO4/C doped with MoO3 by a solution method

Composite Li_0.99Mo_0.01FePO4/C cathode materials were prepared by an easy solution method followed by heat-treating at various temperatures. XRD, SEM, TGA/DTA, EA, CV, XPS and charge–discharge cycles were used to evaluate the Li_0.99Mo_0.01FePO₄/C composite powders. The results indicate that mix-doping method does not affect the olivine structure of the cathode but considerably improves its capacity delivery and cycle performance. Among the prepared cathode materials, the sample heat-treated at 700 °C for 12 h shows best electrochemical performances. It shows initial specific discharge capacities of 161 and 124 mAh g^− 1 with C rates of 0.2C and 2C, respectively, which is ascribed to the enhancement of the electronic conductivity by ion doping and carbon coating.     

Synthesis and electrochemical properties of Li2S–B2S3–Li4SiO4

New Li⁺ ion-conductive glasses Li₂S–B₂S₃–Li₄SiO₄ were synthesized by rapid quenching, and they were transformed into glass ceramics by heat treatment. The heat treatment increased the ionic conductivities of the Li₄SiO₄-doped glasses, and the highest ionic conductivity observed in the system was 1.0 × 10^− 3 S cm^− 1 at room temperature. The glass ceramics were highly stable against electrochemical oxidation with a wide electrochemical window of 10 V.     

Spectroscopic properties of Co2+: ZnAl2O4 nanocrystals in sol–gel derived glass–ceramics

Transparent glass–ceramics containing zinc–aluminum spinel (ZnAl₂O₄) nanocrystals doped with tetrahedrally coordinated Co²⁺ ions were obtained by the sol–gel method for the first time. The gels of composition SiO₂–Al₂O₃–ZnO–CoO were prepared at room temperature and heat-treated at temperature ranging 800–950 °C. When the gel samples were heated up to 900 °C, ZnAl₂O₄ nanocrystals were precipitated. Co²⁺ ions were located in tetrahedral sites in ZnAl₂O₄ nanocrystals. X-ray diffraction analysis shows that the crystallite sizes of ZnAl₂O₄ crystal become large with the heat-treatment temperature and time, and the crystallite diameter is in the range of 10–15 nm. The dependence of the absorption and emission spectra of the samples on heat-treatment temperature were presented. The difference in the luminescence between Co²⁺ doped glass–ceramic and Co²⁺ doped bulk crystal was analysed. The crystal field parameter D_q of 423 cm⁻¹ and the Racah parameters B of 773 cm⁻¹ and C of 3478.5 cm⁻¹ were calculated for tetrahedral Co²⁺ ions.     

Development of zeolite-derived novel aluminosilicate phosphors

In this research, zeolite-derived aluminosilicate phosphors were synthesized through the ion exchange route. Red light-emitting property of Eu³⁺-doped aluminosilicate phosphors were discussed from a view point of the Eu content, heat-treatment condition and the oxidation state of Eu ions. The crystalline phase of the host aluminosilicates could be successfully controlled as designed based on the published NaAlO₂–SiO₂ binary phase diagram. Orange-red emission peaks derived from the ⁵D₀→⁷F_j (j=0, 1, 2, 3, 4) transition of Eu³⁺ were observed around 590–700 nm, and 4f⁶5d→4f⁷ transition of Eu²⁺ was observed at around 400–500 nm. The relative intensity I(⁵D₀→⁷F₂) of the dominant emission peak at 612 nm increased consistently with the Eu content. The results of the XANES spectroscopy analysis revealed that Eu²⁺ ion in the 1400 °C as heat-treated host aluminosilicate were successfully converted to Eu³⁺ by the additional annealing at 1100 °C. The Eu contents and heat-treatment conditions were determined to exhibit the best performance as a red phosphor, which were 10 wt% and 1500 °C, respectively     

Acceptors related to group I elements in ZnO ceramics

ZnO ceramics doped with Li, Na or K were sintered in air for 4 h at 1000 °C. Electrical conductivity as well as photoluminescence (PL), PL excitation and photoconductivity spectra were measured and compared with those in undoped samples. The influence of both fast and slow cooling of the samples from 1000 °C on measured characteristics was investigated. The yellow–orange PL bands associated with the deep acceptors Li_Zn, Na_Zn and K_Zn were observed and the corresponding PL excitation spectra were determined. These acceptors were found to form some complexes with other lattice defects.     

Physical,electrochemical and supercapacitive properties of activated carbon pellets from pre-carbonized rubber wood sawdust by CO2 activation

The physical and electrochemical properties of the activated carbon pellet electrodes have been investigated. Activated carbon pellets were prepared from single step carbonization process of pre-carbonized rubber wood sawdust at a temperature of 800 °C that followed with a CO₂ activation process at temperature in the range of 700–1000 °C. The BET characterization on the sample found that the surface area of the carbon pellet increased with the increasing of the activation temperature. The optimum value was as high as 683.63 m² g⁻¹. The electrical conductivity was also found to increase linearly with the increasing of the activation temperature, namely from 0.0075 S cm⁻¹ to 0.0687 S cm⁻¹ for the activation temperature in the range of 700–1000 °C. The cyclic voltammetry characterization of the samples in aqueous solution of 1 M H₂SO₄ also found that the specific capacitance increased with the increasing of the activation temperature. Typical optimum value was shown by the sample activated at 900 °C with the specific capacitance was as high as 33.74 F g⁻¹ (scan rate 1 mV s⁻¹). The retained ratio was as high as 32.72%. The activated carbon pellet prepared from the rubber wood sawdust may found used in supercapacitor applications.     

7Li NMR study on Li+ ionic diffusion and phase transition in LixCoO2

The temperature dependence of the spin-lattice relaxation time, T₁ and the line width of the ⁷Li nucleus were measured in delithiated Li_xCoO₂ (x = 0.6, 0.8, 1.0). Two different relaxation behaviors were observed in the temperature dependence of T₁^− 1 in a x = 0.8 sample. These would have arisen from inequivalent Li sites in two coexisting phases; an original hexagonal (HEX-I) and a modified hexagonal (HEX-II) phase in the x = 0.8 sample. We analyzed using a phenomenological non Debye-type relaxation model. Motional narrowing in the line width was observed in each sample, the result revealing that Li⁺ ions begin to move at low temperature in samples with less Li content. It was found that the activation energy associating with Li⁺ ion hopping in the HEX-II phase is smaller than that in the HEX-I phase. These results show that the HEX-II phase produced in the Li deintercalation process would be suitable for Li⁺ ionic diffusion in multi-phase Li_xCoO₂, and it is expected that this would enable fast ionic diffusion. Li⁺ ionic diffusion related to phase transition is discussed from ⁷Li NMR results.     

NMR studies of cation transport in the crystalline ion conductors MCF3SO3 (M = Li,Na) and Li7TaO6

In this contribution we present studies on the mechanism of ion transport in crystalline solid electrolytes employing a range of different solid state nuclear magnetic resonance (NMR) experiments. The first part is devoted to the elucidation of a possible correlation of cation transport and anion reorientation in the dynamically disordered rotor phases of alkali trifluoromethane sulfonates MCF₃SO₃ (M = Li, Na) employing ⁷Li, ¹³C, ¹⁷O and ²³Na NMR line shape analysis, whereas the second part focuses on the tracking of cation diffusion pathways in the hexaoxometalate Li₇TaO₆ utilizing ⁶Li 1D and 2D exchange MAS NMR approaches.     

Cellulose-based carbon—A potential anode material for lithium-ion battery

A series of hard carbons was produced by the carbonization of microcrystalline cellulose powder in the temperature range of 950–1100 °C. The properties of the carbons were characterized using elemental analysis, X-ray diffraction and N₂ and CO₂ adsorption. The effect of heat-treatment temperature (HTT), pyrolytic carbon (PC) coating and discharging mode on the lithium insertion/deinsertion behavior of the carbons was assessed in a coin-type half-cell with metal lithium cathode. Increasing cellulose HTT modifies mostly carbon porosity, the surface area (S_DFT) decreases from about 500 to 167 m² g⁻¹. It is associated with lowering the reversible C_rev and irreversible C_irr capacities, but without improving relatively low (0.72) 1st cycle coulombic efficiency. Applying constant current (CC)+constant voltage (CV) discharging mode instead of conventional CC enhances the reversible capacity by 15–18%. PC coating is effective in reducing C_irr by ∼20% with a little change of C_rev. The best capacity parameters, C_rev of 458 mA h g⁻¹ and C_irr of 139 mA h g⁻¹, were measured for PC coated 1000 °C carbon. The prolonged cycling of full-cell assembled with anode of the carbon and commercial cathode revealed that after initial 20 cycles the capacity decay (0.029 mA h/cycle) is comparable to that of commercial cell with graphite-based anode.     

UV–visible absorption spectrum determination of optical energy gaps of α and β lithium nitrides

It is well known that a high pressure can induce α–β phase transformation of lithium nitride (Li₃N). However, this work demonstrated that a reverse phase transformation of Li₃N from β to α could occur when it was subjected to heat-treatment at 500 °C in vacuum. Furthermore, the optical properties of α and β lithium nitrides were evaluated by UV–visible spectra. The optical energy gaps (E_g) of α and β lithium nitrides, which were determined from the derivative UV–visible spectra, are 1.81±0.01 and 2.14±0.01 eV, respectively.     

Preparation of cube micrometer potassium niobate (KNbO3) by hydrothermal method and sonocatalytic degradation of organic dye

Cube micrometer potassium niobate (KNbO₃) powder, as a high effective sonocatalyst, was prepared using hydrothermal method, and then, was characterized by X-ray diffractometer (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX). In order to evaluate the sonocatalytic activity of prepared KNbO₃ powder, the sonocatalytic degradation of some organic dyes was studied. In addition, some influencing factors such as heat-treatment temperature and heat-treatment time on the sonocatalytic activity of prepared KNbO₃ powder and catalyst added amount and ultrasonic irradiation time on the sonocatalytic degradation efficiency were examined by using UV–visible spectrophotometer and Total Organic Carbon (TOC) determination. The experimental results showed that the best sonocatalytic degradation ratio (69.23%) of organic dyes could be obtained when the conditions of 5.00 mg/L initial concentration, 1.00 g/L prepared KNbO₃ powder (heat-treated at 400 °C for 60 min) added amount, 5.00 h ultrasonic irradiation (40 kHz frequency and 300 W output power), 100 mL total volume and 25–28 °C temperature were adopted. Therefore, the micrometer KNbO₃ powder could be considered as an effective sonocatalyst for treating non- or low-transparent organic wastewaters.     

Synthesis and crystallographic studies of garnet-related lithium-ion conductors Li6CaLa2Ta2O12 and Li6BaLa2Ta2O12

High-purity specimens of Li₆CaLa₂Ta₂O₁₂ and Li₆BaLa₂Ta₂O₁₂ have been successfully synthesized by solid-state reactions. The analytical chemical compositions of these samples were in good agreement with the nominal compositions of Li₆CaLa₂Ta₂O₁₂ and Li₆BaLa₂Ta₂O₁₂. The Rietveld refinements verified that these compounds have the garnet-type framework structure with the lattice constants of a = 12.725(2) Å for Li₆CaLa₂Ta₂O₁₂ and a = 13.001(4) Å for Li₆BaLa₂Ta₂O₁₂. All of the diffraction peaks of X-ray powder diffraction patterns were well indexed on the basis of cubic symmetry with space group Ia-3d. To make a search for Li sites, the electron density distributions were precisely examined by using the maximum entropy method. Li⁺ ions occupy partially two types of crystallographic site in these compounds: (i) tetrahedral 24d sites, and (ii) distorted octahedral 96h sites, the latter of which are the vacant sites of the ideal garnet-type structure. The present Li₆CaLa₂Ta₂O₁₂ and Li₆BaLa₂Ta₂O₁₂ samples exhibit the conductivity σ = 2.2 × 10^? 6 S cm^? 1 at 27 °C (E_a = 0.50 eV) and σ = 1.3 × 10^? 5 S cm^? 1 at 25 °C (E_a = 0.44 eV), respectively.     

Preparation and characterization of solid polymer electrolytes based on PHEMO and PVDF-HFP

Polymer electrolyte membranes consisting of a novel hyperbranched polyether PHEMO (poly(3-{2-[2-(2-hydroxyethoxy) ethoxy] ethoxy}methyl-3′-methyloxetane)), PVDF-HFP (poly(vinylidene fluoride-hexafluoropropylene)) and LiTFSI have been prepared by solution casting technique. X-ray diffraction of the PHEMO/PVDF-HFP polymer matrix and pure PVDF-HFP revealed the difference in crystallinity between them. The effect of different amounts of PVDF-HFP and lithium salts on the conductivity of the polymer electrolytes was studied. The ionic conductivity of the prepared polymer electrolytes can reach 1.64 × 10^? 4 S·cm^? 1 at 30 °C and 1.75 × 10^? 3 S·cm^? 1 at 80 °C. Thermogravimetric analysis informed that the PHEMO/PVDF-HFP matrix exhibited good thermal stability with a decomposition temperature higher than 400 °C. The electrochemical experiments showed that the electrochemical window of the polymer electrolyte was around 4.2 V vs. Li⁺/Li. The PHEMO/PVDF-HFP polymer electrolyte, which has good electrochemical stability and thermal stability, could be a promising solid polymer electrolyte for polymer lithium ion batteries.     

High lithium ion conducting glass-ceramics in the system Li2S–P2S5

Highly ion-conductive Li₂S–P₂S₅ glass-ceramic electrolytes were prepared by controlling the compositions and heat treatment temperatures of the glasses. The 70Li₂S·30P₂S₅ (mol%) glass-ceramic heated at 360 °C showed the highest conductivity of 3.2 × 10^− 3 S cm^− 1 at room temperature and the lowest activation energy of 12 kJ mol^− 1 for conduction in the binary system Li₂S–P₂S₅. The outstanding property was attributed to both the precipitation of the new crystal as a metastable phase and the increase in crystallinity of the phase. With increasing heat treatment temperatures, the metastable phase changed into thermodynamically stable phases such as the Li₄P₂S₆ crystal by heat treatment up to 550 °C, resulting in low conductivities of the glass-ceramics. It was, thus, found that the formation of superionic metastable phases by heating the Li₂S–P₂S₅ glasses is responsible for the marked enhancement on the conducting properties of the glass-ceramics.     

Determination of the diffusion coefficient of lithium ions in nano-Si

The diffusion coefficients of lithium ions (D_Li⁺) in nano-Si were determined by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and galvanostatic intermittent titration technique (GITT). D_Li⁺ values are estimated to be ~ 10^? 12 cm² s^? 1 and exhibit a “W” type varying with the lithium concentration in silicon. Two minimum regions of D_Li⁺ (at Li_2.1 ± 0.2Si and Li_3.2 ± 0.2Si) are found, which probably result from two amorphous compositions (a-Li₇Si₃ and a-Li₁₃Si₄). Besides the two minimum regions, one maximum D_Li⁺ is observed at Li₁₅Si₄, corresponding to the crystallization of highly lithiated amorphous Li_xSi.     

Structural,XPS and impedance analysis of LixCoVO4 (x = 0.8, 1.0, 1.2)

Lithium cobalt vanadate Li_xCoVO₄ (x = 0.8; 1.0; 1.2) has been prepared by a solid state reaction method. The XRD analysis confirms the formation of the sample. A new peak has been observed for Li_1.0CoVO₄ and for Li_1.2CoVO₄ indicating the formation of a new phase. The XPS analysis indicates the reduction in the oxidation of vanadium and oxygen with the addition of Li in Li_xCoVO₄ (x = 0.8, 1.0, 1.2). The impedance analysis gives the conductivity value as 2.46 × 10^− 5, 6.16 × 10^− 5, 9 × 10^− 5 Ω^− 1 cm^− 1 for Li_xCoVO₄ (x = 0.8; 1.0; 1.2), all at 623 K. The similarity in the bulk activation energy (E_a) and the activation enthalpy for migration of ions (E_ω) indicate that the conduction in Li_1.2CoVO₄ has been due to hopping mechanism.     

7Li and 51V NMR study on Li+ ionic diffusion in lithium intercalated LixV2O5

Li_xV₂O₅ (0.4 < x < 1.4) prepared by solid-state reaction were studied by ⁷Li and ⁵¹V NMR spectroscopy. ⁷Li NMR spectra showed a narrowing of the line width in relation to Li⁺ionic diffusion. Analysis of Li_xV₂O₅ using a Debye-type relaxation model showed a low activation energy ∼0.07 eV in the sample of x = 0.4 below room temperature, and revealed a Li⁺ionic diffusion with larger activation energy ∼0.5 eV above 450 K in lithium-rich samples. The latter is ascribed to the existence of a multi-phase system comprising stable ɛ- and γ-phases, resulting from complicated phase transitions at high temperature. These shapes and shifts enable the classification of the β-, ɛ-, δ-, and γ-phases. The ionic diffusion of Li⁺ ions is discussed in relation to the complicated phase transitions.