Enhancement of electron-capture detection of methyl bromide in air by iodination.

An instrumentally simple and cost-effective method for the direct analysis of methyl bromide in ambient air is described. The method is based on the separation of sample components by gas chromatography, the conversion of methyl bromide to methyl iodide by reaction with an inorganic iodide salt, and the detection of the methyl iodide thereby produced by an electron-capture detector. Of the 20 different inorganic salts investigated here for conversion of methyl bromide to methyl iodide, zinc iodide was found to provide the greatest conversion efficiency. In addition, zinc iodide was found to provide high conversion efficiency at a modest reaction temperature, thereby minimizing both the thermal decomposition of compounds within the reaction volume and the level of column bleed introduced to the detector. The reactions of several other brominated and chlorinated organic compounds with zinc iodide have also been characterized. The successful application of this instrument to the quantitative determination of methyl bromide in a local background air sample is then demonstrated.     

Mesoionic dimethyl derivatives of some 1,2,4-triazinones. The course of the reaction of 3,5-dimethoxy, 3-methoxy-5-methylthio, 5-methoxy-3- methylthio and 3,5-bis(methylthio)-1,2,4-triazine with methyl iodide

Treatment of 3,5-dimethoxy-1,2,4-triazine ( 1a ) with methyl iodide was found to give depending on the reaction time triazinium iodide 2a , triaziniumolates 4a and 6a as well as methoxytriazinones 7a and 8a . Thermolysis of 2a gave triaziniumolates 4a and 6a . Reaction of 2a , 4a or methoxytriazinone 9a with methyl iodide in acetonitrile yielded as the sole product 6a . Reaction of 3-methoxy-5-methylthio-1,2,4-tri-azine (1b ) with methyl iodide gave triazinium iodide 2b and methylthio triazinone 7b . Hydrolysis of 2a,b afforded 4a . Reaction of 5-methoxy-3-methylthio-1,2,4-triazine ( 1c ) with methyl iodide gave triazinium iodide 2c , triaziniumolate 4b , triazinium iodide 5b and triazinone 8b . Hydrolysis of 2c yielded 4b and its thermolysis gave a mixture of 4b and 5b . Reaction of 2c , 4b and triazinone 9b with methyl iodide afforded 5b . Treatment of 3,5-bis(methylthio)-1,2,4-triazine ( 1d ) with methyl iodide was found to give a mixture of N1 and N2 methiodides 2d and 3d which gave on hydrolysis 4b and 8b , respectively. Methylation of 6-methyl derivatives 1c-g gave analogous results, however the proportions of N1 methylated products were lower and the reaction rates higher in comparison to their respective lower homologues 1a,c,d . The structures of the mesoionic dimethyl derivatives were assigned from uv, ir, ¹H nmr and electron impact mass spectra. The structural assignments were eventually confirmed by quantum chemical calculations of net charge distributions, bond lengths and ipso angles of the C5?O bonds.     

Formation of Methyl Iodide in the Radiolysis of Aqueous Cesium Iodide and Acetic Acid Solutions

Volatile compounds of radioactive iodine, including methyl iodide, are released into the environment in the cases of serious accidents at nuclear power plants. The aim of this study was to find a conceivable mechanism of the radiation-chemical formation of methyl iodide in aerated aqueous solutions of cesium iodide and acetic acid. This provides the basis for subsequent investigations aimed at preventing the formation of methyl iodide. The radiation-chemical yield of methyl iodide formation in 10^–3M CsI solutions containing CH₃COOH (0.1 mol/l) decreased with increasing the pH. This fact is primarily explained by a decrease in the steady-state concentration of molecular iodine with increasing the pH. An increase in the pH of irradiated solutions up to pH 9 was found not only to prevent the formation of methyl iodide but also to enhance its radiation-chemical degradation.     

Elimination of oxidative degradation during the per-O-methylation of carbohydrates

The possible oxidative degradation mechanism occurring during the per-O-methylation of carbohydrates in dimethyl sulfoxide with methyl iodide in the presence of base is described. Evidence is presented that this process occurs only under anhydrous conditions when there is a long reaction time between the carbohydrate dissolved in dimethyl sulfoxide and methyl iodide, followed by reaction with the base. Under these specific conditions, the oxidative degradation of alditols, and cyclic carbohydrates, with and without a free hemiacetal group, is observed. The reaction between carbohydrate and methyl iodide in dimethyl sulfoxide can result in a complete oxidative degradation depending on the type of carbohydrate and the time of reaction. The oxidative degradation can be accelerated by replacing methyl iodide with dimethyl sulfate. Mass spectrometric identification of the degradation products of d-glucitol indicates simultaneous oxidation processes at all the hydroxyl groups, with site dependent rates of their reactivity. This oxidative process is not a characteristic of the methylation of carbohydrates in dimethyl sulfoxide with methyl iodide in the presence of solid sodium hydroxide and can be totally avoided by treating the carbohydrate with powdered sodium hydroxide before introduction of methyl iodide under nonanhydrous conditions, or by adding a trace of water in dimethyl sulfoxide before methyl iodide, or by using N,N-dimethylacetamide as the solvent. The degradation of the per-O-methylated carbohydrates in the liquid-liquid extraction process is also taken into account, and it is found that the degradation process can be avoid by neutralization of the base before extraction, by using benzene or tetrachloromethane as extraction solvent, and by drying the final organic extract.     

溴甲烷在强激光场中的电离和解离

利用自制的反射式飞行时间质谱仪(RTOF-MS)研究了多原子分子CH₃Br在强激光场中的电离解离. 得到了溴甲烷在强激光场中电离解离的飞行时间质谱, 基于RTOF-MS的高分辨率(M/ΔM>2000), 测量了分子库仑爆炸产生的系列碎片离子的动能释放(KER), 用多光子解离和库仑爆炸解释了实验结果. 与碘甲烷在强场中的实验结果对比发现: (1) 在相同的激光场强下, 碘甲烷电离解离的最高价碎片离子为I⁶⁺而溴甲烷为Br³⁺; (2) 溴甲烷质谱中存在母体离子的脱氢产物CH_mBr⁺ 和CH_mBr²⁺, 而对于碘甲烷, 没有检测到这些通道, C-I键首先断开; (3) 质谱中存在H⁷⁹Br⁺和H⁸¹Br⁺, 而碘甲烷的电离解离中不存在HI产物; (4) 溴甲烷库仑两体爆炸的有效电荷间距随着两碎片电荷乘积的增大而增大, 而对于碘甲烷此间距几乎不随电荷乘积变化; (5) CH_m⁺(m=0, 1, 2)的主要生成通道可能与碘甲烷不同, 不是来自CH₃⁺的顺序脱氢, 而是来自脱氢母体离子的直接解离.     

Feasibility of monitoring acetic acid process using near-infrared spectroscopy

Near-infrared (NIR) spectroscopy has been utilized to demonstrate its feasibility for the measurement of major components in the acetic acid process. In order to simulate the acetic acid process, synthetic mixtures were prepared from five different components: acetic acid, methyl acetate, methyl iodide, water, and potassium iodide. Partial least squares (PLS) regression was utilized to differentiate the spectral characteristics as well as to quantify each component for the mixtures. The spectral features of acetic acid, methyl acetate, methyl iodide, and water are noticeably different with each other over the entire NIR region. The quantity of iodide ion, which does not absorb NIR radiation, was determined using the wavelength shift and intensity change of water absorption band caused by the change of iodide ion concentration. The PLS calibration results of the five components show good correlation with reference data. They also demonstrate the technical feasibility of NIR spectroscopy for monitoring important components in the acetic acid process.     

Kinetic study of the oxidative addition of methyl iodide to Vaska’s complex in ionic liquids

Oxidative addition of methyl iodide to Vaska’s complex in the ionic liquids 1-butyl-3-methylimidazolium triflate [C₄mim][OTf], [C₄mim] bis(trifluormethylsulfonyl)imide [Tf₂N], and N-hexylpyridinium [C₆pyr][Tf₂N] occurred cleanly to give the expected Ir(III) oxidative addition product. Pseudo-first order rate constants were determined for the oxidative addition reaction in each solvent ([Vaska’s] = 0.25 mM, [CH₃I] = 37.5 mM). The observed rate constants under these conditions were 5-10 times slower than the rate seen in DMF. At high methyl iodide concentrations (>23 mM), the expected first order dependence on methyl iodide was not observed. In each ionic liquid, there was no change in the reaction rates within experimental error over the methyl iodide concentration range of 23-75 mM. At lower methyl iodide concentration, a decrease in rate was observed in [C₄mim][Tf₂N] with decreasing concentration of methyl iodide.     

Direct observation of reductive elimination of methyl iodide from a rhodium(III) pincer complex: the importance of sterics

A rare case of directly observed alkyl halide reductive elimination from rhodium is reported. Treatment of the naphthyl-based PCP-type Rh(III) methyl complexes 2a,b [(C10H5(CH2PR2)2)Rh(CH3)(I)] (R = iPr 2a, R = tBu 2b) with CO resulted in facile reductive elimination of methyl iodide in the case of 2b, yielding the Rh(I) carbonyl complex [(C10H5(CH2PR2)2)Rh(CO)] 3b (R = tBu), while the less bulky 2a formed CO adducts and did not undergo reductive elimination, contrary to expectations based on electron density considerations. Moreover, 3b oxidatively added methyl iodide, while 3a did not. CD3I/CH3I exchange studies in the absence of CO indicate that reversible formation of (ligated) methyl iodide takes place in both systems. Subsequently, when CO is present, it displaces methyl iodide in the bulkier tBu system, whereas with the iPr system formation of the Rh(III) CO adducts is favored. Iodide dissociation followed by its attack on the rhodium-methyl group is unlikely.     

Synthesis of Low‐Viscosity Ionic Liquids for Application in Dye‐Sensitized Solar Cells

Two types of ionic liquids (ILs), 1‐(3‐hexenyl)‐3‐methyl imidazolium iodide and 1‐(3‐butenyl)‐3‐methyl imidazolium iodide, are synthesized by introducing an unsaturated bond into the side alkyl chain of the imidazolium cation. These new ionic liquids exhibit high thermal stability and low viscosity (104 cP and 80 cP, respectively). The molecular dynamics simulation shows that the double bond introduced in the alkane chain greatly changes the molecular system space arrangement and diminishes the packing efficiency, leading to low viscosity. The low viscosity of the synthesized ionic liquids would enhance the diffusion of redox couples. This enhancement is detected by fabricating dye‐sensitized solar cells (DSSCs) with electrolytes containing the two ILs and I₂. The highest efficiency of DSSCs is 6.85 % for 1‐(3‐hexenyl)‐3‐methyl imidazolium iodide and 5.93 % for 1‐(3‐butenyl)‐3‐methyl imidazolium iodide electrolyte, which is much higher than that of 5.17 % with the counterpart 1‐hexyl‐3‐methyl imidazolium iodide electrolyte.     

Femtosecond real-time probing of transition state dynamics in a surface photoreaction: methyl desorption from CH3I on MgO(100)

A novel experimental approach to the investigation of surface adsorbate reaction dynamics is presented. The direct time-resolved monitoring of the surface reaction transition state and product formation dynamics were accomplished via pump-probe mass spectrometry. As an example, methyl iodide molecules adsorbed at submonolayer coverage on an ultrathin magnesia film on Mo(100) were photoexcited to the A-band by ultrafast laser pulse irradiation. Employing time-delayed multiphoton ionization the dynamics of the dissociative methyl iodide transition state and of the emerging methyl photoproduct could be detected with femtosecond resolution. The reaction times deduced from the temporal evolution of the methyl ion mass signal indicate a strong interaction of the methyl fragment with the substrate surface prior to desorption.     

Characterization and oxidative addition reactions for iridium cod complexes

Three different [Ir(LL′)(cod)] complexes (LL′ = N-aryl-N-nitrosohydroxylaminato) (cupf), trifluoroacetylacetonato (tfaa), and (methyl 2-(methylamino)-1-cyclopentene-1-dithiocarboxylato-κN,κS) (macsm)) were synthesized, characterized, and their rates of oxidative addition with methyl iodide were determined. Formation of an isosbestic point during the oxidative addition of methyl iodide with the complexes containing tfaa and cupf as bidentate ligands indicated formation of only one product, while an increase in absorbance maximum observed for macsm confirms that the same reaction between the complex and methyl iodide occurs. Kinetic results for all complexes, except [Ir(tfaa)(cod)], showed simple second-order kinetics with a zero intercept (within experimental error). Rates of oxidative addition for bidentate ligands in acetonitrile showed an increase of an order of magnitude with a change in the type of bidentate ligands. Computational chemistry using density functional theory calculations showed that the oxidative addition reaction proceeds through a “linear” transition state with the methyl iodide unit tilted towards the LL′-bidentate ligand.     

Electron stimulated reactions of methyl iodide coadsorbed with amorphous solid water

The electron stimulated reactions of methyl iodide (MeI) adsorbed on and suspended within amorphous solid water (ice) were studied using a combination of postirradiation temperature programmed desorption and reflection absorption infrared spectroscopy. For MeI adsorbed on top of amorphous solid water (ice), electron beam irradiation is responsible for both structural and chemical transformations within the overlayer. Electron stimulated reactions of MeI result principally in the formation of methyl radicals and solvated iodide anions. The cross section for electron stimulated decomposition of MeI is comparable to the gas phase value and is only weakly dependent upon the local environment. For both adsorbed MeI and suspended MeI, reactions of methyl radicals within MeI clusters lead to the formation of ethane, ethyl iodide, and diiodomethane. In contrast, reactions between the products of methyl iodide and water dissociation are responsible for the formation of methanol and carbon dioxide. Methane, formed as a result of reactions between methyl radicals and either parent MeI molecules or hydrogen atoms, is also observed. The product distribution is found to depend on the film's initial chemical composition as well as the electron fluence. Results from this study highlight the similarities in the carbon-containing products formed when monohalomethanes coadsorbed with amorphous solid water are irradiated by either electrons or photons.     

Kinetics and mechanism of the mercury(II)-assisted hydrolysis of methyl iodide

The kinetics and mechanism of the reaction of aqueous Hg(II) with methyl iodide have been investigated. The overall reaction is best described as Hg(II)-assisted hydrolysis, resulting in quantitative formation of methanol and, in the presence of excess methyl iodide, ultimately, HgI2 via the intermediate HgI+. The kinetics are biexponential when methyl iodide is in excess. At 25 degrees C, the acceleration provided by Hg2+ is 7.5 times greater than that caused by HgI+, while assistance of hydrolysis was not observed for HgI2. Thus, the reactions are not catalytic in Hg(II). The kinetics are consistent with an SN2-M+ mechanism involving electrophilic attack at iodide. As expected, methylation of mercury is not a reaction pathway; traces of methylmercury(II) are artifacts of the extraction/preconcentration procedure used for methylmercury analysis.     

Quaternization of 1H-imidazo[4,5-b]pyridine and 4-methyl-4H-imidazo[4,5-b]pyridine

Unsubstituted imidazo[4,5-b]pyridine adds methyl iodide to the pyridine N atom. Treatment of the resulting iodide with base forms 4-methyl-4H-imidazo[4,5-b]pyridine. This nucleophile can readily add methyl iodide to form only one salt, 1,4-dimethylimidazo[4,5-b]pyridinium iodide.L. M. Litvinenko Institute of Physical Organic Chemistry and Coal Chemistry, Ukraine Academy of Sciences, Donetsk 340114. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 9, pp. 1232–1233, September, 1994. Original article submitted june 17, 1994.     

交联聚4-乙烯基吡啶及其季铵盐负载钯催化剂对丙烯酸甲酯加氢反应的研究

 制备了交联聚4-乙烯基吡啶及碘甲烷,溴乙烷季铵化的聚4-乙烯基吡啶负载钯催化剂,考察了它们催化丙烯酸甲酯加氢反应的性能。对碘甲烷季铵化聚4-乙烯基吡啶负载钯催化剂,其催化加氢活性随载体季铵化程度的增加而减小,并且当载体季铵化程度低于80％时,其催化加氢活性比聚4-乙烯基吡啶负载催化剂高。实验结果表明催化剂制备条件对催化性能有很大影响。     

Raman scattering investigation of the orientational dynamics of methyl iodide

A Raman scattering study of the v₃ vibration—rotation band in methyl iodide as a function of temperature and dilution (in cyclohexane) has been performed. All the data satisfy the second moment criterion. Detailed information about rotational correlation function, angular velocity correlation function, various correlation times and mean-square torque has been obtained. The correlation function, in the pure liquid, decays slowly with decrease in temperature whereas it decays faster with decreasing concentration in cyclohexane. It has been shown, from a consideration of the second moment as a function of concentration, that the contribution of collision-induced scattering to the v₃ band of methyl iodide is negligible. Applicability of a simple “damped librator model”, with a view to understanding certain aspects of the rotational motion in methyl iodide, is discussed.     

交联聚4-乙烯基吡啶及其季铵盐负载钯催化剂对丙烯酸甲酯加氢反应的研究

制备了交联聚4-乙烯基吡啶及碘甲烷,溴乙烷季铵化的聚4-乙烯基吡啶负载钯催化剂,考察了它们催化丙烯酸甲酯加氢反应的性能。对碘甲烷季铵化聚4-乙烯基吡啶负载钯催化剂,其催化加氢活性随载体季铵化程度的增加而减小,并且当载体季铵化程度低于80％时,其催化加氢活性比聚4-乙烯基吡啶负载催化剂高。实验结果表明催化剂制备条件对催化性能有很大影响。     

A Facile Route to Cyclic and Acyclic Alkyl-Arginines

Treatment of commercially available alkyl and cycloalkyl thioureas with methyl iodide provides the corresponding S-alkylisothiouronium iodide which reacts directly with ornithine to yield the title compounds.     

Synthesis and photoinitiating properties of N-substituted 2,6-diisopropylanilines

Reactions of 2,6-diisopropylaniline and its 4-bromo and 4-thiocyanato derivatives with methyl iodide in dimethylformamide in the presence of potassium carbonate gave exclusively the corresponding N,N-dimethyl-substituted products. Heating of 2,6-diisopropylaniline and 2,6-diisopropyl-4-thiocyanatoaniline with methyl iodide without a solvent afforded only N-methyl derivatives.     

Methylation of 3-methyl- and 3-phenyl-4-arylhydrazonoisoxazol-5-ones with methyl iodide and dimethyl sulfate

Methylation of 3-methyl-4-arylhydrazonoisoxazol-5-ones with methyl iodide affords both 2,3-dimethyl-4-arylazoisoxazol-5-ones and 3-methyl-4-(N-methylarylhydrazono)isoxazol-5-ones but with dimethyl sulfate only the former products are formed. 3-Phenyl-4-arylhydrazonoisoxazol-5-ones behave in a similar way on methylation with methyl iodide and dimethyl sulfate.