Crosslinked methylphenylsilicones as stationary phases for capillary gas chromatography

Summary Methyl(phenyl)silicones offer useful selectivities when used as stationary phases in gas chromatography (GC). Such phases have, however, hitherto been of restricted importance in capillary GC due to the lack of phases having a viscosity high enough to ensure stationary phase film stability. Further, to utilize fully the possibilities of a methyl(phenyl)silicone capillary column, it must also possess high efficiency and a high degree of deactivation.In this work, the preparation of soda-glass capillary columns coated within situ cured methyl(phenyl) and methyl(tolyl)-silicones is presented. Vulcanization was made possible by the introduction of some vinyl substitution in the gum to be cured: tolyl-containing gums could be cured without the presence of vinyl groups. In addition, fused silica capillary columns coated with OV-1701 were prepared.The columns show a coating efficiency of above 80%, a thermal stability up to 320 °C and a high degree of deactivation. Their utility is demonstrated by the separation of samples containing polynuclear aromatics, antidepressants and some potent mutagens.Presented at the 14th International Symposium on Chromatography London, September, 1982     

Cyclodextrin carbamates as novel chiral stationary phases for capillary gas chromatography

The following carbamate derivatives of cyclodextrins (CDs) were prepared as novel chiral stationary phases for capillary gas chromatography: hexakis(2,6-di-O-pentyl)-α-cyclodextrin hexa(3-n-propyl, 3-isopropyl, and 3-phenylcarbamate), heptakis-(2,6-di-O-pentyl)-β-cyclodextrin hepta(3-n-propyl, 3-isopropyl, and 3-phenylcarbamate), and octakis(2,6-di-O-pentyl)-γ-cyclodextrin octa(3-n-propyl, 3-isopropyl, and 3-isopropyl, and 3-phenylcarbamate). Metal capillary columns coated with these stationary phases resolved many kinds of racemic mixture. In general, they were especially effective towards polar compounds such as free alcohols, amines, and epoxides. The types of sample which were effectively resolved depended on the cavity size of the CD: α-CD derivatives were specifically effective toward compounds having linear alkyl chains, and β-CD derivatives toward compounds with phenyl groups. The results indicate that chiral separation with the cyclodextrin carbamates depends on the formation of inclusion complexes and also on the hydrogen-bonding interactions between the samples and the CD carbamates.     

Novel guanidinium-based ionic liquids as stationary phases for capillary gas chromatography

<正>The present study describes guanidinium-based ionic liquids(GBILs) as stationary phases for capillary gas chromatography (CGC) and to the best of our knowledge,no related reports are available up to now.In this study,a hexaalkylguanidinium ionic liquid(DOTMG-NTf_2) was synthesized and coated statically onto capillary columns.Selectivity of the stationary phase was evaluated by separating Grob test mixture,test mixture,alcohols mixture,and fatty acid methyl esters mixture,and thermal stability was investigated as well.The present study demonstrates that GBILs as CGC stationary phases exhibit satisfactory selectivity and thermal stability and have a great potential as new candidates for CGC stationary phases.     

Comparison of two liquid crystals as stationary phases in capillary gas chromatography

Summary The comparative gas chromatographic behavior has been investigated for two new liquid-crystal stationary phases, 2-(3-chlorobenzyloxy)-3-hexanoxy-4-(4-chlorobenzoyloxy)-4′-(4-methylbenzoyloxy)azobenzene (denoted 3-Cl) and 2-(3-methylbenzyloxy)-3-hexanoxy-4-(4-chlorobenzoyloxy)-4′-(4-methylbenzoyloxy)azobenzene (denoted 3-CH₃). The structures of the main core of the two liquid crystals are the same but they differ by lateral aromatic branch— 3-chlorobenzyloxy and 3-methylbenzoyloxy. Their thermal properties were established by use of differential scanning calorimetry (DSC) and their chromatographic separation properties by use of glass capillary columns. Interesting analytical performance was obtained in the separation of isomeric aromatic compounds, polyaromatic compounds, volatile aroma compounds, andcis andtrans isomers. Separation efficiency was higher for 3-Cl, especially for volatile aroma compounds, light aromatic compounds, and polyaromatic compounds, although the phases were similar in otherways.     

Dicyanobiphenyl polysioloxane stationary phases for capillary column gas chromatography

Summary The chromatographic performance of newly developed dicyanobiphenyl polysiloxane stationary phases were evaluated and compared with the performance of other polar stationary phases, including the previously reported monocyanobiphenyl polysiloxanes. Due to the unique combination of polarizable biphenyl and polar cyano functionalities in the side chains of the flexible polysiloxane backbone, and by virtue of their mild liquid crystalline properties, the new stationary phases provide excellent resolution of a wide variety of analytes, both polar and nonpolar, in both GC and SFC. They can be easily coated and cross-linked in open tubular columns, and the resultant columns demonstrate excellent efficiency and performance at temperatures up to 280–300°C. The new stationary phases exhibit enhanced selectivities for various types of isomeric compounds.     

Synthesis of siloxane stationary phases for capillary gas chromatography and supercritical fluid chromatography

A comparison is made between dichlorosilanes and cyclic siloxanes as starting materials in the synthesis of stationary phases for capillary gas chromatography (CGC) and supercritical fluid chromatography (SFC). Siloxanes containing one or more of the side groups methyl, vinyl, phenyl, and cyanoethyl in various ratios were synthesized and compared. These phases were characterized by chromatographic (gel permeation, GPC), spectroscopic (IR, ¹H NMR, ²⁹Si NMR), and thermal (DSC) methods. Coated fused silica columns were evaluated with respect to polarity, crosslinkability with several free-radical initiators, and thermal stability. A new liquid phase, 7% cyanoethyl, 7% phenyl, 1% vinyl methyl polysiloxane is shown to be more polar than OV-1701, more temperature stable, easily crosslinked and suitable for use in supercritical fluid chromatography.     

Macroporous polymeric monoliths as stationary phases in gas adsorption chromatography

The influence of the conditions of preparation of divinylbenzene-based polymer monoliths on the properties of monolithic capillary columns for use in gas adsorption chromatography was examined. It was found that the polymerization time and the temperature and composition of the polymerization mixture have an effect on the dynamic and chromatographic properties of the columns. The monolithic capillary columns prepared under the optimal synthesis conditions had the height equivalent of a theoretical plate at the level of 20–30 μm, which is an order of magnitude below that of conventional open tubular columns.     

The preparation of non-extractable methylphenylpolysiloxane stationary phases for capillary column gas chromatography

Summary The synthesis of methylphenylpolysiloxane polymers and their use in the preparation of crosslinked, non-extractable stationary phases for fused-silica capillary columns are described. By preparing more viscous phenyl-containing polymers than are commercially available, stationary phase films of these polymers could be efficiently coated on fused-silica capillary columns and stabilized by a free radical crosslinking mechanism using peroxides. Four methylphenylpolysiloxane polymers containing different phenyl concentrations were prepared. These included three polymers containing 50% phenyl and one polymer containing 70% phenyl. Two of the 50% phenyl polymers had one phenyl and one methyl group attached to each silicon atom. One of these also had 1% vinyl incorporated. The third 50% phenyl polymer was synthesized in such a way that one half of the silicon atoms had two phenyl groups attached while the rest contained dimethyl groups. The 70% phenyl polymer also had 4% vinyl incorporated. Due to the intrinsic thermal stability of these phenyl phases and the enhanced film stability achieved by crosslinking, the 70% phenyl phase could be utilized up to 400 °C. Using the methods described in this paper, highly efficient and thermally stable fused silica capillary columns coated with crosslinked methylphenylpolysiloxane stationary phases can be successfully prepared.     

Analytical performances of two liquid crystals and their mixture as stationary phases in capillary gas chromatography

Comparative gas chromatographic applications of two new liquid crystals called LCa and LCb and their equimolar mixture LC(a+b) were investigated. The thermal properties of LCa, LCb and LC(a+b) were established with differential scanning calorimetry (DSC) and polarizing microscopy. Differential scanning calorimetry of LC(a+b) showed that the melting or clearing temperature was intermediate between the corresponding temperatures of the pure compounds. Polarizing microscopy showed that the liquid crystal phase of A + B was nematic. The chromatographic separation abilities LCa, LCb and LC(a+b) were studied using fused silica capillary columns. Interesting analytical performances were obtained: isomeric separation of aromatics, polyaromatics, phenols.     

气相色谱固定相研究新进展

发展高选择性固定相是实现气相色谱(GC)高效分离样品组分及其分析测定的关键。近年,材料科学的快速发展促进了新型色谱固定相的研究和应用。该文综述了近5年有关多孔材料、石墨烯及类似物、三聚茚类材料和蝶烯类材料等作为GC固定相的研究进展,并对GC固定相研究进行了总结和展望。     

Liquid-crystalline stationary phases for gas chromatography

Physico-chemical properties of new liquid-crystalline stationary phases (LCSPs) for gas chromatography are reviewed. The mechanism of chromatographic separation on liquid-crystalline stationary phases is discussed and examples of analyses of complex mixtures of organic compounds using capillary and packed columns are given.     

Nonextractable cyanopropyl polysiloxane stationary phases for capillary chromatography

Summary Crosslinkable cyanopropylpolysiloxane stationary phases have been difficult to produce because of steric effects of the large cyanopropyl groups or because of the interaction between the polar cyanopropyl groups and the groups added for crosslinking. Various polymers containing 50% to 90% cyanopropyl were synthesized which contained vinyl,p-tolyl, or 4-vinylphenyl groups for crosslinking. Thep-tolyl group was found to give satisfactory crosslinking if there were two such groups attached to one silicon atom.     

Application of dithiocarbamate resin-metal complexes as stationary phases in gas chromatography

A chelating resin with dithiocarbamate functional groups to which silica gel was used as a matrix and silanes were used with diamino functional groups as a spacer was synthesized. The structure and the conversion of functional groups of the resin were confirmed by IR spectra and elemental analysis. The influence of pH on the adsorption of the resin for metal ions was also examined. The resin under optimum pH conditions formed a 1:1 metal complex with copper ion. The affinity of metal ions toward the synthesized resin decreased in the order Hg(II) >; Cu(ll) >; Cd(II) >; Zn(II). The resin exhibited efficient complexation of transition metal cations. The cadmium, copper and zinc complexes were investigated for application as stationary phase for the gas chromatographic analysis of dialkyl sulphides. The material was packed in a 2.1 m × 3.2 mm I.D. spiral glass column. Factors affecting the retention and sample selectivity were also studied. A shorter retention time and sharp peaks were obtained when ammonia was introduced into the mobile phase. At an oven temperature of 100°C, a flow-rate of 60 ml min⁻¹ and use of a flame ionization detector, the analysis of dialkyl sulphides showed that the copper resin complex as the stationary phase gave the best results. The stationary phase was also used for the separation of dialkyl sulphide from a hydrocarbon mixture.     

Chiral stationary phases for capillary gas chromatography: Towards higher selectivity and stability

Thermal stability and enantioselectivity of chiral polysiloxane stationary phases for gas chromatography depend upon the composition and purity of the polymer matrix, its functional groups, the chiral selector, and the pretreatment of the inner surface of the capillary. Under proper conditions, narrow-bore capillaries can be prepared which may be used up to 300 °C for short times. Crosslinking of the phases is achieved by heating.     

Enantiomer separation of pharmaceuticals by capillary gas chromatography with novel chiral stationary phases

New chiral stationary phases of polydimethylsiloxane anchored with (S)-(-)-t-leucine derivatives were provided for use in enantiomer separation of pharmaceuticals by capillary gas chromatography. Fifteen pharmaceuticals were separated into their enantiomeric pairs by converting them into pentafluoropropionyl and heptafluorobutyryl derivatives. The separation factor and resolution obtained from the new phases were superior to those from the conventional Chirasil-Val capillary column.