契形结构光纤表面等离子体共振传感器研究

提出了一种契形端面结构的光纤表面等离子体共振(SPR)传感器激励模型. 采用时域有限差分法对契形SPR波导的共振模型进行数值模拟, 通过在光纤出射端抛磨契形角度并进行敏感膜修饰, 制出具有契形端面结构的类Kretschmann微棱镜式光纤SPR传感器, 实现激发SPR的光波调制.结果表明, 在1.3330–1.4215折射率范围内, 制备的契形光纤SPR传感器相对于常规光纤SPR传感器, 其平均灵敏度提高了近1–6倍, 1倍和6倍分别出现在小角度结构(15° 契形) 传感器和大角度结构(60°契形) 传感器, 且仍保持 10^-5 等级的分辨率. 该类型结构的传感器具有契形端面激励模式, 设计灵活性高、制备工艺简单、可微量检测样本等优点, 能够很好地适应于不同环境和测量条件的实际生化检测、环境监测需求. 关键词： 光纤传感器 表面等离子体共振 契形端面结构 折射率灵敏度     

Fiber-optic surface plasmon resonant sensor with low-index anti-oxidation coating

A multimode fiber-optic surface plasmon resonance(SPR) sensor with a MgF2 film as a modulated layer is studied.The fiber-optic SPR sensor is investigated theoretically,specifically the influence of the dielectric protecting layer,using a four-layer model.The sensor is then fabricated with the optimal parameters suggested by the theoretical simulation.The sensor has a high sensitivity in the analyte refractive index(RI) range of 1.33-1.40.The best sensitivity of 4 464 nm/RIU is achieved in the experiment.The use of dielectric film(MgF2) can not only modulate the resonance wavelength of the sensor,but also protect the silver film from oxidation.     

Cascaded dual-channel fiber SPR temperature sensor based on liquid and solid encapsulations

In order to control the working wavelength range of the fiber surface plasmon resonance(SPR) temperature sensor and realize the wavelength division multiplexing type multi-channel fiber SPR temperature sensor, by comprehensively investigating the influence of liquids with different thermal-optical coefficients and solid packaging materials on the performance of fiber SPR temperature sensor, a dual-channel fiber SPR temperature sensor based on liquid–solid cascade encapsulation was designed and fabricated. The liquid temperature sensing stage encapsulated in capillary worked in 616.03 nm–639.05 nm band, the solid sensing stage coated with pouring sealant worked in 719.37 nm–825.27 nm band, and the two stages were cascaded to form a fiber dual-channel temperature sensor. The testing results indicated that when the temperature range was 35℃–95℃, the sensitivity of two-stage temperature detection was -0.384 nm/℃and -1.765 nm/℃ respectively. The proposed fiber sensor has simple fabrication and excellent performance which can be widely used in various fields of dual-channel temperature measurement and temperature compensation.     

Tapered fiber optic surface plasmon resonance sensor for analyses of vapor and liquid phases

We report a new approach to analyze both vapor and liquid phases by utilizing a tapered fiber optic surface plasmon resonance (SPR) probe. This technique employs a fiber optic SPR probe with a modified geometry to tune the SPR coupling wavelength-angle pair. The observed composite spectrum included two distinct SPR dips associated with surface plasmons excited in the gas and liquid active regions. This sensor is able to detect refractive index changes in both vapor and liquid phases individually by simultaneous monitoring SPR coupling wavelengths from the two sensing surfaces.     

侧边抛磨的U型金溅射塑料光纤等离子体共振传感器

为了测量溶液折射率变化，对塑料光纤纤芯表面的纤芯-金层-液体的3层膜结构进行研究，制作了一种使用U型结构并结合侧边抛磨方法的表面等离子体共振传感器。将截取的一段塑料光纤弯曲成为U型，并在烘箱中通过较高温度使这段光纤的曲率固定，对弯曲部分的外表面进行抛光，暴露该位置塑料光纤芯层并在其上溅射金纳米薄膜层，将制备好的传感器浸入不同折射率的液体中，使用光谱分析仪观察光谱的移动。实验结果表明:当塑料光纤SPR传感器测量折射率变化范围在1.333~1.406的液体时，可以通过光谱观察到随着液体折射率的增大，等离子体共振吸收峰位置也不断地向波长增大的方向移动，并且二者之间存在线性关系，其灵敏度为7.5×10-4 RIU/nm。该传感器探头具有灵敏度高、小型化、易制备、低成本的特点。     

内置调制层型光纤表面等离子体波共振传感器研究

研究了一种基于内置调制层结构的光纤表面等离子体波共振(SPR)传感器。通过在金膜与纤芯的内侧增覆具有不同厚度和属性的光学透明薄膜作为内调制层,构成了性能独特的光电复合薄膜,起到调节倏逝波矢量和金膜表面等离子体振荡波矢量的双重作用,进而控制共振效应,为调节灵敏度提供依据。采用时域有限差分方法对内置调制层结构光纤SPR共振激励模型属性进行数值仿真。在此基础上,研制了用于液体折射率测量的内置调制层型光纤SPR传感探针。实验结果表明,该传感器在1.335～1.392折射率范围内,随着待测液体折射率的增大,SPR共振光谱向长波方向偏移,且灵敏度达到2263.1nm/RIU,与基于纤芯-金膜-环境介质三层结构的常规光纤SPR传感器相比提高一倍,能够更好地满足环境折射率检测的需求。     

反射式光纤表面等离子体波共振传感器特性研究

研究了一种基于表面等离子体波共振(SPR)光谱分析的折射率检测新方法。研究发现,表面等离子体波共振效应光谱特征的折射率灵敏度会随着液体性质变化而发生改变。根据折射率测量范围不同,分别选择共振波长和共振强度作为检测参量,实现理论折射率分辨力达到10~(-5)数量级以上。在理论分析和实验基础上,设计出一种基于共振光强检测的终端反射式光纤表面等离子体波共振效应传感系统,采用将传感信号和基准光信号的比值作为液体折射率变化的度量值。在1．3325～1．3991的折射率测量范围内,度量值与折射率之间呈现单调递减关系,线性相关系数为0．9983。通过定义耦合系数,还可实现对表面等离子体波共振效应效应强弱和变化趋势的评估。     

Cross-point analysis for a multimode fiber sensor based on surface plasmon resonance

A novel analysis based on surface plasmon resonance (SPR) with a side-polished multimode fiber and a white-light (halogen light) source is presented. The sensing system is a multimode optical fiber in which half of the core has been polished away and a 40 nm gold layer is deposited on to the polished surface by dc sputter. The SPR dip in the optical spectrum is investigated with an optical spectrum analyzer (OSA). In our SPR fiber sensor, the use of liquids with different refractive indices leads to a shift in the spectral dip in the SPR curve. The cross point (CP) of the two SPR spectra obtained from the refractive-index liquid and the deionized water measurements was observed with the OSA. The CP is shifted sensitively in wavelength from 630 to 1300 nm relative to a change in the refractive index of the liquid from 1.34 to 1.46. High sensitivities of 1.9 x 10(-6) refractive-index units (RIUs) in the range of the refractive index of the liquid from 1.40 to 1.44 of 5.7 x 10(-7) RIUs above the value of 1.44 are proposed and demonstrated in our novel SPR analysis.     

螺旋形塑料光纤表面等离子体共振折射率传感器

研究了基于波长调制的螺旋形塑料光纤(plastic optical fiber, POF)表面等离子体共振(surface plasmon resonance, SPR)折射率传感器。采用机械热压和扭曲法将塑料光纤制备成螺旋形,在螺旋形POF上通过磁控溅射蒸镀一定厚度(约50 nm)的金属薄膜来激励SPR效应,从而形成螺旋形POF-SPR传感器。通过对螺旋形POF-SPR传感器的结构进行修饰,研究不同结构参数对折射率传感特性的影响。实验结果表明:由厚度为500μm扁平形POF扭制、螺纹数为4的螺旋形POF-SPR传感器具有较好的线性度和折射率传感特性,在折射率为1.335～1.400范围内测得的灵敏度为1 262 nm/RIU。该传感器具有成本较低、制备简单、结构稳定等优点。     

基于表面等离子体共振和定向耦合的D形光子晶体光纤折射率和温度传感器

利用光子晶体光纤结构的灵活性和性能的优越性, 设计了一种基于D形光子晶体光纤的折射率和温度传感器. 在D形光子晶体光纤表面抛磨并镀上金纳米薄膜, 作为表面等离子体共振传感通道用来测量液体折射率; 在包层的一个空气孔中填充温敏液体甲苯, 作为定向耦合通道实现对温度的测量. 进一步的数值计算发现, 基于定向耦合效应的温度传感和基于表面等离子体共振的折射率传感相互独立, D形光子晶体光纤同时进行折射率和温度传感检测. 在各向异性的完美匹配层边界条件下利用全矢量有限元法对该传感器特性进行了数值研究, 发现D形光子晶体光纤的空气孔直径决定了定向耦合吸收峰的中心波长和温度传感的灵敏度, 金薄膜的厚度和D形结构的抛磨深度仅影响表面等离子体共振峰的相对强度. 结果表明: 该传感器在-10–80 ℃的温度范围内具有11.6 nm/℃的温度灵敏度, 在1.34–1.44折射率范围内折射率灵敏度最高可达26000 nm/RIU.     

Ultrahigh sensitivity polarimetric strain sensor based upon D-shaped optical fiber and surface plasmon resonance technology

An ultrahigh sensitivity polarimetric strain sensor is proposed based upon a four-layer D-shaped optical fiber and surface plasmon resonance (SPR) technology. In contrast to existing SPR-based sensors, which are based on changes in the refractive index of the overlayer, the sensor proposed in this study is based on the change in the refractive index of the fiber core in response to the application of an axial load. Specifically, the phase difference between the P and S waves after passing through the sensor under SPR conditions is measured using a common-path heterodyne interferometer and is used to determine the corresponding change in the refractive index of the core, from which the strain is then inversely derived. The experimental results show that the sensitivity of the proposed sensor is around 2.19×10? deg/ε, i.e., degree/strain. By contrast, that of a conventional (non-SPR) polarimetric fiber sensor is just 5.2×102 deg/ε. To the best of the authors' knowledge, the sensor proposed in this study represents the first reported attempt to exploit the refractive index change of the core of an SPR-based fiber sensor for strain measurement purposes.     

一种基于相位测量的角漂移自适应结构表面等离子体共振气体折射率测量系统

提出了一种可抑制角漂移的表面等离子体传感器结构,并结合相位测量设计了相应的气体折射率测量系统。分析表明激光入射角、金膜厚度以及反射光p、s分量的相位差与气体折射率之间的固有非线性是影响相位响应度与折射率测量精度的主要因素。计算表明所提出的自适应结构将角漂移引起的误差降低了一个数量级并很大程度提高了测量灵敏度。同时分析设计了金膜厚度参数,并评估了反射光p、s分量的相位差与气体折射率之间固有非线性带来的误差。应用于空气折射率的测量比对实验显示其测量精度达到了10-6量级。     

波长调制型表面等离子体共振的传感特性研究

表面等离子体共振(SPR)光学传感器能实现生物医学的快速、 无标记、 高精度检测,是生物化学分析的重要方法。 研制了基于波长调制型的Kretschmann结构表面等离子体共振(SPR)生物传感系统,研究了在体溶液传感方式下的传感性能。 利用不同浓度的乙醇和乙二醇溶液进行体溶液传感测试。 实验结果表明,在折射率低时共振波长对折射率变化响应的灵敏度低,但响应的线性度高;随着折射率增大,共振波长对折射率的响应变化的灵敏度提高。 在1.407 0～1.430 RIU折射率范围内,灵敏度高达11 487 nm·RIU-1。 传感器的共振波长的稳定性为0.213 8 nm,可分辨最小折射率趋近10-6 RIU。 所研制的波长调制型表面等离子共振传感器操作简单、 灵敏度高、 检测范围大,可实现浓度极低生物标记物的有效检测,在化学、 生物传感领域有重要的应用。     

基于非完整表面缺陷模式的一维光子晶体高分辨率折射率传感器

介绍了一种新型一维光子晶体非完整表面缺陷模式折射率传感器的原理及方法,并构建了高分辨率、高Q值传感器探测实验系统,利用二甲基砜溶液验证了这种传感器.实验结果表明,该折射率传感器的灵敏度为3 025 nm·RIU-1(Refractive index LJnit),当光谱仪的分辨率为0.01 mn时,传感器的分辨率为3.3×10-6RIU.该传感器的Q值为260,并且在1.4～1.42范围内具有良好的线性度(线性度为0.991 27).文章分析了传感器Q值与光子晶体周期数及被探测液体厚度之间的关系.理论和实验证明这种全反射型光子晶体表面波传感器具有与SPR相似的无标、实时生物检测的特点且可获得更高的探测灵敏度、Q值和分辨率.     

基于光纤M-Z干涉的高灵敏度液体折射率传感器的实验研究

提出并制备了一种基于Mach-Zehnder干涉效应的高灵敏度光纤液体折射率传感器.分别利用NaCl溶液和甘油溶液,研究了传感器的透射光谱和外界介质折射率的关系.实验结果表明,随着周围介质折射率的增大,传感器干涉谱的极小值点对应的波长向长波方向漂移,在1.333~1.356的折射率变化范围内,极小值点对应的波长的漂移量和折射率的变化具有较好的线性关系,对应的灵敏度约为4 086 nm/refractive-index.该传感器制作简单、结构紧凑,在生物和化学测量中具有较好的应用前景.     

基于全相位滤波技术的光纤表面等离子体共振传感解调算法

基于生物样品检测对折射率传感的迫切需求,构建一种全光纤表面等离子体共振(surface plasmon resonance,SPR)系统,并针对其设计了基于全相位滤波技术的SPR特征波长传感解调算法.基于系统仿真,理论计算了光纤SPR传感器的折射率传感灵敏度.采用全相位滤波技术提取光纤SPR传感器透射光谱的特征波长,理论推导了全相位滤波器的解析表达式.实验结果表明,使用本算法的光纤SPR传感器折射率传感灵敏度为1640.4 nm/RIU,折射率检测的分辨率是7.36×10~(-4)RIU,与传统方法相比,有效提高了系统的检测精度和抗光源扰动性能,降低了实验成本.     

Refractive index sensor based on high-order surface plasmon resonance in gold nanofilm coated photonic crystal fiber

We propose a novel kind of wide-range refractive index optical sensor based on photonic crystal fiber(PCF) covered with nano-ring gold film.The refractive index sensing performance of the PCF sensor is analyzed and simulated by the finite element method(FEM).The refractive index liquid is infiltrated into the cladding air hole of the PCF.By comparing the sensing performance of two kinds of photonic crystal fiber structures, a wide range and high sensitivity structure is optimized.The surface plasmon resonance(SPR) excitation material is chose as gold, and large gold nanorings are embedded around the first cladding air hole of the PCF.The higher order surface plasmon modes are generated in this designed optical fiber structure.The resonance coupling between the fundamental mode and the 5 th order surface plasmon polariton(SPP)modes is excited when the phase matching condition is matched.Therefore, the 3 rd loss peaks appear obvious red-shift with the increase of the analyte refractive index, which shows a remarkable polynomial fitting law.The fitnesses of two structures are 0.99 and 0.98, respectively.When the range of refractive indices is from 1.40 to 1.43, the two kinds of sensors have high linear sensitivities of 1604 nm/RIU and 3978 nm/RIU, respectively.     

基于空气孔微结构光纤的表面等离子体共振折射率传感器北大核心CSCD

提出了一种基于表面等离子体共振(SPR)效应增强的光子晶体光纤折射率传感器。该传感器结构通过光纤熔接机拼接光子晶体光纤(PCF),在光子晶体光纤中间引入一个空气孔形成PCF-空气孔-PCF的光纤传感结构,随后使用磁控溅射镀膜工艺在其表面沉积一层薄金膜制备而成。实验探究了折射率及温度对传感器的响应。结果表明,在1.333~1.389的折射率范围内,所提出的传感器的平均折射率灵敏度为2 142.52 nm,且测量线性度为0.981,品质因子约13.10。实验结果表明该传感器对温度不敏感。相比于无空气孔的PCF传感结构,引入的空气孔增强了SPR效应,使得传感器拥有良好的共振峰深度。得益于上述优势,该类型传感器有望在生物医学、环境监测等领域得到应用。     

基于表面等离子体共振原理的空芯光纤传感器

设计了一种基于表面等离子体共振原理,使用空芯光纤作为光波导、外表面镀金属膜的光学材料圆柱体作为探头的新型折射率传感器。通过建立光学模型进行分析,在理论上推导出了这种传感器的传输光谱损耗公式,并针对该传感器在不同的光纤长度、探头材料、检测物质折射率等参数设置下的检测性能进行了分析,获得了各种参数对其性能的影响。由于该传感器可针对不同折射率的检测物质灵活地更换合适探头材料,相对于传统的表面等离子体共振光纤传感器,在易用性和性价比等方面具有更好的应用价值。     

SPR棱镜传感器测量液体折射率的原理

推导了消失波函数的表达式,介绍了衰减全反射现象及SPR传感器测量液体折射率的原理,并利用SPR传感器测量了牛奶样品的反射系数及折射率与脂肪等主要成分含量的关系曲线.