EPR and infrared spectroscopic evidence that a kinetically competent paramagnetic intermediate is formed when acetyl-coenzyme A synthase reacts with CO

Carbon monoxide dehydrogenase/acetyl-CoA synthase (CODH/ACS) is a bifunctional enzyme which enables archaea and bacteria to grow autotrophically on CO and hydrogen/carbon dioxide using the Wood-Ljundahl pathway. CO produced from reduction of carbon dioxide by CODH is transferred to the active site of ACS through an intramolecular tunnel, where it combines with Coenzyme A and a methyl cation to produce acetyl-CoA. The active site of ACS contains a single [4Fe-4S] cluster bridged by a cysteine sulfur atom to a binuclear center. The binuclear center is composed of two Ni atoms bridged by two separate cysteine sulfurs. The Ni site attached to the [4Fe-4S] is referred to as proximal Ni, while the other Ni atom, which assumes a square-planar geometry, is referred to as the distal site. We report the characterization of the carbonylated form of highly active (0.67 spins/mol) heterologously expressed monomeric ACS from C. hydrogenoformans in E. coli by rapid-freeze quench EPR (RFQ-EPR) and stopped-flow infrared (SF-IR) spectroscopies. The reaction of ACS with CO produces a single metal-carbonyl species whose formation rate, measured by SF-IR, correlates with the rate of formation, measured by RFQ-EPR, of the paramagnetic state of the enzyme (NiFeC species). These results indicate that the NiFeC species is the predominant form observed in solution when ACS reacts with CO. The NiFeC species contains the proximal Ni in the +1 redox state and the [4Fe-4S] cluster in the 2+ state, thus there is no evidence for either a Ni(0) or a Ni(II) state in the active carbonylated form of the enzyme.     

CODH‐IV: A High‐Efficiency CO‐Scavenging CO Dehydrogenase with Resistance to O2

CO dehydrogenases (CODHs) catalyse the reversible conversion between CO and CO₂. Genomic analysis indicated that the metabolic functions of CODHs vary. The genome of Carboxydothermus hydrogenoformans encodes five CODHs (CODH‐I–V), of which CODH‐IV is found in a gene cluster near a peroxide‐reducing enzyme. Our kinetic and crystallographic experiments reveal that CODH‐IV differs from other CODHs in several characteristic properties: it has a very high affinity for CO, oxidizes CO at diffusion‐limited rate over a wide range of temperatures, and is more tolerant to oxygen than CODH‐II. Thus, our observations support the idea that CODH‐IV is a CO scavenger in defence against oxidative stress and highlight that CODHs are more diverse in terms of reactivity than expected.     

Effect of sodium sulfide on Ni-containing carbon monoxide dehydrogenases

The structure of the active-site C-cluster in CO dehydrogenase from Carboxydothermus hydrogenoformans includes a mu(2)-sulfide ion bridged to the Ni and unique Fe, whereas the same cluster in enzymes from Rhodospirillum rubrum (CODH(Rr)) and Moorella thermoacetica (CODH(Mt)) lack this ion. This difference was investigated by exploring the effects of sodium sulfide on activity and spectral properties. Sulfide partially inhibited the CO oxidation activity of CODH(Rr) and generated a lag prior to steady-state. CODH(Mt) was inhibited similarly but without a lag. Adding sulfide to CODH(Mt) in the C(red1) state caused the g(av) = 1.82 EPR signal to decline and new features to appear, including one with g = 1.95, 1.85 and (1.70 or 1.62). Removing sulfide caused the g(av) = 1.82 signal to reappear and activity to recover. Sulfide did not affect the g(av) = 1.86 signal from the C(red2) state. A model was developed in which sulfide binds reversibly to C(red1), inhibiting catalysis. Reducing this adduct causes sulfide to dissociate, C(red2) to develop, and activity to recover. Using this model, apparent K(I) values are 40 +/- 10 nM for CODH(Rr) and 60 +/- 30 microM for CODH(Mt). Effects of sulfide are analogous to those of other anions, including the substrate hydroxyl group, suggesting that these ions also bridge the Ni and unique Fe. This proposed arrangement raises the possibility that CO binding labilizes the bridging hydroxyl and increases its nucleophilic tendency toward attacking Ni-bound carbonyl.     

Sulfur ligand substitution at the nickel(II) sites of cubane-type and cubanoid NiFe3S4 clusters relevant to the C-clusters of carbon monoxide dehydrogenase

Substitution reactions at the nickel site of the cubane-type cluster [(Ph3P)NiFe3S4(LS3)]2- (2) have been investigated in the course of a synthetic approach to the C-clusters of CODH. Reaction of 2 with RS- or toluene-3,4-dithiolate affords [(RS)NiFe3S4(LS3)]3- (R = Et (5), H (6)) or [(tdt)NiFe3S4(LS3)]3- (7), demonstrating that anionic sulfur ligands can be bound at the NiII site. Clusters 5 and 6 contain tetrahedral Ni(micro3-S)3(SR) sites. Cluster 7 is of particular interest because it includes a cubanoid NiFe3(micro2-S)(micro3-S)3 core and an approximately planar Ni(tdt)(micro3-S)2 unit. The cubanoid structure is found in all C-clusters, and an NiS4-type unit has been reported in C. hydrogenoformans CODH. Clusters 5/6 are formulated to contain the core [NiFe3S4]1+ identical with Ni2+ (S = 1) + [Fe3S4]1- (S = 5/2) and 7 the core [NiFe3S4]2+ identical with Ni2+ (S = 0) + [Fe3S4]0 (S = 2) on the basis of structure, 57Fe isomer shifts, and 1H NMR isotropic shifts. Also reported are [(EtS)CuFe3S4(LS3)]3- (9) and [Fe4S4(LS3)(tdt)]3- (11). The structures of 5-7, 9, and 11 are presented. Cluster 11, with a five-coordinate Fe(tdt)(micro3-S)3 site, provides a clear structural contrast with 7, which is currently the closest approach to a C-cluster but lacks the exo iron atom found in the NiFe4S4,5 cores of the native clusters. (CODH = carbon monoxide dehydrogenase, LS3 = 1,3,5-tris((4,6-dimethyl-3-mercaptophenyl)thio)-2,4,6-tris(p-tolylthio)benzene(3-), tdt = toluene-3,4-dithiolate).     

Stepwise O2-Induced Rearrangement and Disassembly of the [NiFe4(OH)(μ3-S)4] Active Site Cluster of CO Dehydrogenase

Ni,Fe-containing carbon monoxide dehydrogenases (CODHs) catalyze the reversible reduction of carbon dioxide to carbon monoxide. CODHs are found in anaerobic microorganisms and can rapidly lose their activity when exposed to air. What causes the loss of activity is unclear. In this study, we analyzed the time-dependent structural changes induced by the presence of air on the metal centers of CODH-II. We show that inactivation is a multistep process. In a reversible step, the open coordination site on the Ni ion is blocked by a Ni,Fe-bridging μ-sulfido or chlorido ligand. Blocking this open coordination site with a cyanide ligand stabilizes the cluster against O₂-induced decomposition, indicating that O₂ attacks at the Ni ion. In the subsequent irreversible phase, nickel is lost, the Fe ions rearrange and the sulfido ligands disappear. Our data are consistent with a reversible reductive reactivation mechanism to protect CODHs from transient over-oxidation.     

M?ssbauer characterization of the iron-sulfur clusters in Desulfovibrio vulgaris hydrogenase.

The periplasmic hydrogenase of Desulfovibrio vulgaris (Hildenbourough) is an all Fe-containing hydrogenase. It contains two ferredoxin type [4Fe-4S] clusters, termed the F clusters, and a catalytic H cluster. Recent X-ray crystallographic studies on two Fe hydrogenases revealed that the H cluster is composed of two sub-clusters, a [4Fe-4S] cluster ([4Fe-4S](H)) and a binuclear Fe cluster ([2Fe](H)), bridged by a cysteine sulfur. The aerobically purified D. vulgaris hydrogenase is stable in air. It is inactive and requires reductive activation. Upon reduction, the enzyme becomes sensitive to O(2), indicating that the reductive activation process is irreversible. Previous EPR investigations showed that upon reoxidation (under argon) the H cluster exhibits a rhombic EPR signal that is not seen in the as-purified enzyme, suggesting a conformational change in association with the reductive activation. For the purpose of gaining more information on the electronic properties of this unique H cluster and to understand further the reductive activation process, variable-temperature and variable-field M?ssbauer spectroscopy has been used to characterize the Fe-S clusters in D. vulgaris hydrogenase poised at different redox states generated during a reductive titration, and in the CO-reacted enzyme. The data were successfully decomposed into spectral components corresponding to the F and H clusters, and characteristic parameters describing the electronic and magnetic properties of the F and H clusters were obtained. Consistent with the X-ray crystallographic results, the spectra of the H cluster can be understood as originating from an exchange coupled [4Fe-4S]-[2Fe] system. In particular, detailed analysis of the data reveals that the reductive activation begins with reduction of the [4Fe-4S](H) cluster from the 2+ to the 1+ state, followed by transfer of the reducing equivalent from the [4Fe-4S](H) subcluster to the binuclear [2Fe](H) subcluster. The results also reveal that binding of exogenous CO to the H cluster affects significantly the exchange coupling between the [4Fe-4S](H) and the [2Fe](H) subclusters. Implication of such a CO binding effect is discussed.     

Carbon monoxide dehydrogenase reaction mechanism: a likely case of abnormal CO2 insertion to a Ni-H(-) bond

Ni-containing carbon monoxide dehydrogenases (CODH), present in many anaerobic microorganisms, catalyze the reversible oxidation of CO to CO(2) at the so-called C-cluster. This atypical active site is composed of a [NiFe(3)S(4)] cluster and a single unusual iron ion called ferrous component II or Fe(u) that is bridged to the cluster via one sulfide ion. After additional refinement of recently published high-resolution structures of COOH(x)-, OH(x)-, and CN-bound CODH from Carboxydothermus hydrogenoformans (Jeoung and Dobbek Science 2007, 318, 1461-1464; J. Am. Chem. Soc. 2009, 131, 9922-9923), we have used computational methods on the predominant resulting structures to investigate the spectroscopically well-characterized catalytic intermediates, C(red1) and the two-electron more-reduced C(red2). Several models were geometry-optimized for both states using hybrid quantum mechanical/molecular mechanical potentials. The comparison of calculated Mo?ssbauer parameters of these active site models with experimental data allows us to propose that the C(red1) state has a Fe(u)-Ni(2+) bridging hydroxide ligand and the C(red2) state has a hydride terminally bound to Ni(2+). Using our combined structural and theoretical data, we put forward a revised version of an earlier proposal for the catalytic cycle of Ni-containing CODH (Volbeda and Fontecilla-Camps Dalton Trans. 2005, 21, 3443-3450) that agrees with available spectroscopic and structural data. This mechanism involves an abnormal CO(2) insertion into the Ni(2+)-H(-) bond.     

Electrocatalytic and Biosensing Properties of Aerobic Carbon Monoxide Dehydrogenase from Hydrogenophaga Pseudoflava Immobilized on Au Electrode towards Carbon Monoxide Oxidation

Herein, an enzyme‐electrode based on the oxygen‐insensitive carbon monoxide dehydrogenase (CODH) containing molybdenum (Mo) and copper (Cu), flavin adenine dinucleotide (FAD) and two different [2Fe‐2 S] clusters as cofactors from the aerobic bacterium Hydrogenophaga pseudoflava, is proposed as a platform for dissolved CO concentration monitoring. The immobilized CODHs on Au electrode retain their catalytic activity and demonstrates changes to cyclic voltammetry and amperometry signals upon interactions with various dissolved CO concentrations. Cyclic voltammetry shows that CODHs are capable of direct electron transfer without any mediator use as oxidative current which starts around ?0.268 V (vs Ag/AgCl) is observed in the presence of CO. When CO‐saturated standard solution was spiked sequentially into the gas‐tight reactor, amperometry analysis shows current increased accordingly with response time within 5 s. Our study demonstrates that this enzyme‐electrode is promising to serve as platform for developing an on‐line dissolved CO concentration monitoring tool which is essential to fill in the gap for conventional technologies which are limited to off‐line measurement.     

How the [NiFe4S4] Cluster of CO Dehydrogenase Activates CO2 and NCO−

Ni,Fe‐containing CO dehydrogenases (CODHs) use a [NiFe₄S₄] cluster, termed cluster C, to reversibly reduce CO₂ to CO with high turnover number. Binding to Ni and Fe activates CO₂, but current crystal structures have insufficient resolution to analyze the geometry of bound CO₂ and reveal the extent and nature of its activation. The crystal structures of CODH in complex with CO₂ and the isoelectronic inhibitor NCO^? are reported at true atomic resolution (d_min≤1.1 Å). Like CO₂, NCO^? is a μ₂,η² ligand of the cluster and acts as a mechanism‐based inhibitor. While bound CO₂ has the geometry of a carboxylate group, NCO^? is transformed into a carbamoyl group, thus indicating that both molecules undergo a formal two‐electron reduction after binding and are stabilized by substantial π backbonding. The structures reveal the combination of stable μ₂,η² coordination by Ni and Fe2 with reductive activation as the basis for both the turnover of CO₂ and inhibition by NCO^?.     

Structural characterization of metallopeptides designed as scaffolds for the stabilization of nickel(II)-Fe(4)S(4) bridged assemblies by X-ray absorption spectroscopy

In earlier work, de novo designed peptides with a helix-loop-helix motif and 63 residues have been synthesized as potential scaffolds for stabilization of the [Ni(II)-X-Fe(4)S(4)] bridged assembly that is the spectroscopically deduced structure of the A-Cluster in clostridial carbon monoxide dehydrogenase. The 63mers contain a consensus tricysteinyl ferredoxin domain in the loop for binding an Fe(4)S(4) cluster and Cys and His residues proximate to the loop for binding Ni(II), with one Cys residue designed as the bridge X. The metallopeptides HC(4)H(2)-[Fe(4)S(4)]-Ni and HC(5)H-[Fe(4)S(4)]-M, containing three His and one Cys residue for Ni(II) coordination and two His and two Cys residues for binding M = Ni(II) and Co(II), have been examined by Fe-, Ni-, and Co-K edge spectroscopy and EXAFS. All peptides bind an [Fe(4)S(4)](2+) cubane-type cluster. Interpretation of the Ni and Co data is complicated by the presence of a minority population of six-coordinate species with low Z ligands, designated for simplicity as [M(OH(2))(6)](2+). Best fits of the data were obtained with ca. 20% [M(OH(2))(6)](2+) and ca. 80% M(II) with mixed N/S coordination. The collective XAS results for HC(4)H(2)-[Fe(4)S(4)]-Ni and HC(5)H-[Fe(4)S(4)]-M demonstrate the presence of an Fe(4)S(4) cluster and support the existence of the distorted square-planar coordination units [Ni(II)(S.Cys)(N.His)(3)] and [Ni(II)(S.Cys)(2)(N.His)(2)] in the HC(4)H(2) and HC(5)H metallopeptides, respectively. In the HC(5)H metallopeptide, tetrahedral [Co(II)(S.Cys)(2)(N.His)(2)] is present. We conclude that the designed scaffolded binding sites, including Ni-(mu(2)-S.Cys)-Fe bridges, have been achieved. This is the first XAS study of a de novo designed metallopeptide intended to stabilize a bridged biological assembly, and one of a few XAS analyses of metal derivatives of designed peptides. The scaffolding concept should be extendable to other bridged metal assemblies.     

Heterobimetallics of nickel-iron dinitrosyl: electronic control by chelate and diatomic ligands

Reaction of [PPN][Fe(NO)2(SePh)2] (1) with dimeric [Ni(mu-SCH2CH2SCH2CH2S)]2 in the presence of additional NO2- produced the neutral heterobimetallic [(ON)Ni[(mu-SCH2CH2)2S]Fe(NO)2] complex (2). The X-ray crystal structures of 1 and 2 show distorted tetrahedral iron dinitrosyl groups, assigned according to the Feltham-Enemark notation as [Fe(NO)2]9 The Fe-NO bonds are off linearity by an average of approximately equals 10 degrees for compounds 1 and 2, while a more linear Ni-NO coordination with a Ni-NO distance of 1.644(2) A was found in 2. The v(NO) value of complex 2 is consistent with an assignment for [Ni(NO)]9 of Ni0(NO)+ as is known for analogous phosphine derivatives, P3Ni0(NO)+. EPR signals of g values = 2.02-2.03 confirmed the existence of the odd electron in the chalcogenated [Fe(NO)2]9 compounds. Two [Fe(NO)2]10 complexes coordinated by the nickel(II) dithiolate, (bismercaptoethanediazacyclooctane)nickel(II), (Ni-1), (Ni-1)Fe(CO)(NO)2 and (Ni-1)Fe(NO)2, were prepared for comparison to the Ni0(NO)+ derivative and other monomeric and homodimetallic derivatives of the Fe(NO)2 fragment. While the oxidation level of Fe(NO)2 is the primary determinant of v(NO) values, they are also highly sensitive to ancillary ligands and, thereby, the distal metal influence through the bridging thiolate donor.     

A [4Fe-4S] cluster dimer bridged by bis(2,2':6',2'-terpyridine-4'-thiolato)iron(II)

The use of 2,2':6',2'-terpyridine-4'-thiol (tpySH) was explored as a bridging ligand for the formation of stable assemblies containing both [4Fe-4S] clusters and single metal ions. Reaction of tpySH (2 equiv) with (NH4)2Fe(SO4)(2).6H2O generated the homoleptic complex [Fe(tpySH)2](2+), which was isolated as its PF6(-) salt. The compound could be fully deprotonated to yield neutral [Fe(tpyS)2], and the absorption spectrum is highly dependent on the protonation state. Reaction of [Fe(tpySH)2](PF6)2 with the new 3:1 site-differentiated cluster (n-Bu4N)2[Fe4S4(TriS)(SEt)] yielded the first metal-bridged [4Fe-4S] cluster dimer, (n-Bu4N)2[{Fe4S4(TriS)(mu-Stpy)}2Fe]. Electrochemical studies indicate that the [4Fe-4S] clusters in the dimer act as independent redox units, while UV-vis spectroscopy provides strong evidence for a thioquinonoid electron distribution in the bridging tpyS(-) ligand. TpySH thus acts as a directional bridging ligand between [4Fe-4S] clusters and single metal ions, thereby opening the way to the synthesis of larger, more complex assemblies.     

Evidence from Mössbauer spectroscopy for distinct [2Fe-2S](2+) and [4Fe-4S](2+) cluster binding sites in biotin synthase from Escherichia coli

Biotin synthase is an AdoMet-dependent radical enzyme that catalyzes the insertion of an FeS cluster-derived sulfur atom into dethiobiotin. The dimeric enzyme is purified containing one [2Fe-2S]2+ cluster per monomer, but it is most active when reconstituted with an additional [4Fe-4S]2+ cluster per monomer. Using M?ssbauer spectroscopy coupled with differential reconstitution of each cluster with 57Fe, we show that the reconstituted enzyme has approximately 1:1 [2Fe-2S]2+ and [4Fe-4S]2+ clusters and that the [4Fe-4S]2+ cluster is assembled at an alternate site not previously occupied by the [2Fe-2S]2+ cluster. These data suggest that biotin synthase is evolved to simultaneously accommodate two different clusters with unique roles in catalysis.     

Control of S-based aggregation: designed synthesis of NiM2 and Ni2M trinuclear complexes

Modification of the nickel dithiolate metalloligand, Ni(bme-daco) [where bme-daco = bis(mercaptoethyl)diazacyclooctane] or Ni-1, by oxygenation of one thiolate into a sulfinate, Ni(mese-daco) [where mese-daco = (mercaptoethyl)(sulfinatoethyl)diazacyclooctane] or Ni-2, restricts the ligating ability to monodentate and is expected to reduce the donor ability of the remaining thiolate S. Nevertheless, the Ni-2 complex forms a stable thiolate S-bound adduct of W0(CO)5, (Ni-2)W(CO)5, a complex whose upsilon(CO) IR spectrum reports insignificant differences in the donor abilities of Ni-1 and Ni-2 in (eta1-NiN2S2)W(CO)5 complexes. In the presence of the strong sulfophile CuI, a CuNi2 trimetallic, (Ni-2)2CuBr, was isolated. Another trimetallic, (mu-eta2-Ni-1)[W(CO)5]2, demonstrated the Ni(bme-daco), Ni-1, unit to bridge low-valent metals in a transoid configuration, yielding W-W distances of over 5 A.     

Chemical activity of iron in [2Fe-2S]-protein centers and FeS2(100) surfaces

Iron atoms bonded to sulfur play an important role in proteins, heterogeneous catalysts, and gas sensors. First-principles density functional calculations were used to investigate the structure and chemical activity of a unique [2Fe-2S] center in the split-Soret cytochrome c (Ssc) from Desulfovibrio desulfuricans. In agreement with a previously proposed structural model [Abreu et al., J. Biol. Inorg. Chem. 2003, 8, 360], it is found that the [2Fe-2S] cluster is located in a surface pocket of the Ssc and bonded to only three cysteines. The [2Fe-2S] center in the Ssc is nonplanar and somewhat distorted with respect to canonical [2Fe-2S] centers seen in proteins where the iron-sulfur unit is bonded to four cysteines. In the Ssc, the lack of one Fe-cysteine bond is partially compensated by the separation between the cysteines that minimizes electrostatic repulsion among these ligands. The unique structure of the [2Fe-2S] center in the Ssc makes the center more chemically active than canonical [2Fe-2S] centers in proteins, (RS)(4)[2Fe-2S] inorganic complexes, and an FeS2(100) surface. A [2Fe-2S] center in the Ssc interacts efficiently with electron acceptors (O2, NO, CO) and poorly with a Lewis base such as H2O. The interaction with molecular oxygen is so strong that eventually oxidatively destroys the [2Fe-2S] unit. The bonding energy of the ligands to the [2Fe-2S] centers and FeS2(100) surface increases following the sequence: H2O < CO < NO < O2. The higher the electron affinity of the ligand, the larger its bonding energy. A relatively large positive charge on the Fe cations in FeS2(100) makes this sulfide surface less reactive toward O2, CO, and NO than the [2Fe-2S] centers in proteins and inorganic complexes.     

Structural models of the bimetallic subunit at the A-cluster of acetyl coenzyme a synthase/CO dehydrogenase: binuclear sulfur-bridged Ni-Cu and Ni-Ni complexes and their reactions with CO

The Ni(II)-dicarboxamido-dithiolato complexes (Et4N)2[Ni(NpPepS)] (1) and (Et4N)2[Ni(PhPepS)] (2) were used as Nid metallosynthons in the construction of higher nuclearity dinuclear Ni-Cu and Ni-Ni species to model the bimetallic Mp-Nid site of the A-cluster of acetyl coenzyme A synthase/CO dehydrogenase (ACS/CODH). Reaction of 1 with [Cu(neo)Cl] and [Ni(terpy)Cl2] in MeCN affords the dinuclear complexes (Et4N)[Cu(neo)Ni(NpPepS)] (3) and [Ni(terpy)Ni(NpPepS)] (4), respectively. Reaction of 2 with [Ni(dppe)Cl2] in MeCN yields [Ni(dppe)Ni(PhPepS)] (6). The Ni-Cu complex 3 exhibits no redox chemistry at the Nid site and no reaction with CO. In contrast, the Nip sites in 4 and 6 are readily reduced (characterized by their Ni(I) EPR spectra) and bind CO, exhibiting nuco bands at 2044 and 1997 cm-1, respectively, indicating terminal CO binding. The present Ni-Ni systems replicate the structural and chemical properties of the A-cluster site in ACS/CODH and support the presence of Ni at Mp in the catalytically active enzyme.     

Spectroscopic evidence for site specific chemistry at a unique iron site of the [4Fe-4S] cluster in ferredoxin:thioredoxin reductase

Ferredoxin:thioredoxin reductase (FTR) catalyzes the reduction of the disulfide in thioredoxin in two one-electron steps using an active site comprising a [4Fe-4S] in close proximity to a redox active disulfide. M?ssbauer spectroscopy has been used to investigate the ligation and electronic properties of the [4Fe-4S] cluster in as-prepared FTR which has the active-site disulfide intact and in the N-ethylmaleimide (NEM)-modified form which provides a stable analogue of the one-electron-reduced heterodisulfide intermediate and has one of the cysteines of the active-site disulfide alkylated with NEM. The results reveal novel site-specific cluster chemistry involving weak interaction of the active-site disulfide with a unique Fe site of the [4Fe-4S]2+ cluster in the resting enzyme and cleavage of the active-site disulfide with concomitant coordination of one of the cysteines to yield a [4Fe-4S]3+ cluster with a five-coordinate Fe site ligated by two cysteine residues in the NEM-modified enzyme. The results provide molecular-level insight into the catalytic mechanism of FTR and other Fe-S-cluster-containing disulfide reductases, and suggest a possible mechanism for the reductive cleavage of S-adenosylmethionine by the radical SAM family of Fe-S enzymes.     

Coordination of adenosylmethionine to a unique iron site of the [4Fe-4S] of pyruvate formate-lyase activating enzyme: a Mössbauer spectroscopic study

Pyruvate formate-lyase activating enzyme (PFL-AE) generates the catalytically essential glycyl radical of PFL. It is a member of the so-called "radical-SAM superfamily" of enzymes that use a [4Fe-4S] cluster and S-adenosylmethionine (AdoMet or SAM) to catalyze diverse radical-mediated reactions. Evidence suggests that this class of enzymes operate by common initial steps involving the generation of an AdoMet-derived adenosyl radical intermediate, of which the mechanism remains unresolved. The three-cysteine CX3CX2C cluster-binding motif common to all members of this superfamily suggests a unique Fe site in the [4Fe-4S] cluster, which presumably interacts with AdoMet to effect the reductive cleavage and radical generation. Here we employ a dual-iron-isotope (56Fe/57Fe) approach to demonstrate the existence of a unique Fe site in the [4Fe-4S] cluster of PFL-AE by M?ssbauer spectroscopy. Coordination of AdoMet to this unique Fe site was made evident by the observation of a substantial increase in the isomer shift (delta) of the M?ssbauer spectrum associated with the unique Fe site: delta = 0.42 mm/s in the absence of AdoMet increases to delta = 0.72 mm/s in the presence of AdoMet. Further, the M?ssbauer data show that the binding of AdoMet to the unique Fe site occurs in the [4Fe-4S]2+ state, prior to the injection of the reducing equivalent required for catalysis. This observation indicates that AdoMet coordination is a necessary prerequisite to adenosyl radical generation.     

过渡金属硫簇的几种簇骼转化反应

报道了过渡金属硫簇化合物的几种簇骼转化反应，即三核链状簇的转化；双核配合物的组合；Ｍｏ２Ｆｅ７Ｓ８和Ｍｏ２Ｆｅ６Ｓ８两种双立方烷的关联；Ｆｅ４Ｓ４立方烷簇向篮状簇的转化；簇降解以及簇骼原子置换反应等。探讨了配体及氧化还原条件对簇骼转化反应的影响。