Low-molecular weight protein profiling of genetically modified maize using fast liquid chromatography electrospray ionization and time-of-flight mass spectrometry

In this work, the use of liquid chromatography coupled to electrospray time-of-flight mass spectrometry (LC-TOFMS) has been evaluated for the profiling of relatively low-molecular weight protein species in both genetically modified (GM) and non-GM maize. The proposed approach consisted of a straightforward sample fractionation with different water and ethanol-based buffer solutions followed by separation and detection of the protein species using liquid chromatography with a small particle size (1.8 μm) C(18) column and electrospray-time-of-flight mass spectrometry detection in the positive ionization mode. The fractionation of maize reference material containing different content of transgenic material (from 0 to 5% GM) led to five different fractions (albumins, globulins, zeins, zein-like glutelins, and glutelins), all of them containing different protein species (from 2 to 52 different species in each fraction). Some relevant differences in the quantity and types of protein species were observed in the different fractions of the reference material (with different GM contents) tested, thus revealing the potential use of the proposed approach for fast protein profiling and to detect tentative GMO markers in maize.     

Detection of the 35S promoter in transgenic maize via various isothermal amplification techniques: a practical approach

In 2003 the European Commission introduced a 0.9 % threshold for food and feed products containing genetically modified organism (GMO)-derived components. For commodities containing GMO contents higher than this threshold, labelling is mandatory. To provide a DNA-based rapid and simple detection method suitable for high-throughput screening of GMOs, several isothermal amplification approaches for the 35S promoter were tested: strand displacement amplification, nicking-enzyme amplification reaction, rolling circle amplification, loop-mediated isothermal amplification (LAMP) and helicase-dependent amplification (HDA). The assays developed were tested for specificity in order to distinguish between samples containing genetically modified (GM) maize and non-GM maize. For those assays capable of this discrimination, tests were performed to determine the lower limit of detection. A false-negative rate was determined to rule out whether GMO-positive samples were incorrectly classified as GMO-negative. A robustness test was performed to show reliable detection independent from the instrument used for amplification. The analysis of three GM maize lines showed that only LAMP and HDA were able to differentiate between the GMOs MON810, NK603, and Bt11 and non-GM maize. Furthermore, with the HDA assay it was possible to realize a detection limit as low as 0.5 %. A false-negative rate of only 5 % for 1 % GM maize for all three maize lines shows that HDA has the potential to be used as an alternative strategy for the detection of transgenic maize. All results obtained with the LAMP and HDA assays were compared with the results obtained with a previously reported real-time PCR assay for the 35S promoter in transgenic maize. This study presents two new screening assays for detection of the 35S promoter in transgenic maize by applying the isothermal amplification approaches HDA and LAMP.     

Interlaboratory study of DNA extraction from multiple ground samples, multiplex real-time PCR, and multiplex qualitative PCR for individual kernel detection system of genetically modified maize

In many countries, the labeling of grains, feed, and foodstuff is mandatory if the genetically modified (GM) organism content exceeds a certain level of approved GM varieties. We previously developed an individual kernel detection system consisting of grinding individual kernels, DNA extraction from the individually ground kernels, GM detection using multiplex real-time PCR, and GM event detection using multiplex qualitative PCR to analyze the precise commingling level and varieties of GM maize in real sample grains. We performed the interlaboratory study of the DNA extraction with multiple ground samples, multiplex real-time PCR detection, and multiplex qualitative PCR detection to evaluate its applicability, practicality, and ruggedness for the individual kernel detection system of GM maize. DNA extraction with multiple ground samples, multiplex real-time PCR, and multiplex qualitative PCR were evaluated by five laboratories in Japan, and all results from these laboratories were consistent with the expected results in terms of the commingling level and event analysis. Thus, the DNA extraction with multiple ground samples, multiplex real-time PCR, and multiplex qualitative PCR for the individual kernel detection system is applicable and practicable in a laboratory to regulate the commingling level of GM maize grain for GM samples, including stacked GM maize.     

Novel reference molecules for quantitation of genetically modified maize and soybean

New quantitation methods based on a real-time polymerase chain reaction (PCR) technique were developed for 5 lines of genetically modified (GM) maize, including MON810, Event176, Bt11, T25, and GA21, and a GM soy, Roundup Ready. Oligonucleotide DNA, including specific primers and fluorescent dye-labeled probes, were designed for PCRs. Two plasmids were constructed as reference molecules (RMs) for the detection of GM maize and GM soy. The molecules contain the DNA sequences of a specific region found in each GM line, universal sequences used in various GM lines, such as cauliflower mosaic virus 35S promoter and nopaline synthase terminator, and the endogenous DNA sequences of maize or soy. By using these plasmids, no GM maize and GM soy were required as reference materials for the qualitative and quantitative PCR technique. Test samples containing 0, 0.10, 0.50, 1.0, 5.0, and 10% GM maize or GM soy were quantitated. At the 5.0% level, the bias (mean-true value) ranged from 2.8 to 19.4% and the relative standard deviation was <5.2%. These results show that our method involving the use of these plasmids as RMs is reliable and practical for quantitation of GM maize and GM soy.     

Interlaboratory trial validation of an event-specific qualitative polymerase chain reaction-based detection method for genetically modified RT73 rapeseed

The qualitative event-specific polymerase chain reaction detection method of genetically modified (GM) RT73 rapeseed was developed based on the cloned 3' end flanking sequence of RT73 rapeseed integration. The specificity of the method for GM RT73 rapeseed was validated using several different GM rapeseed lines, GM maize lines, GM soybean line, non-GM rapeseed, and other non-GM crops. In this study, the developed method was validated through an interlaboratory study by 12 laboratories from 6 countries. The sensitivity of this method was evaluated using several mixed rapeseed meals with different GM RT73 rapeseed contents from 5.0 to 0.01% prepared by our laboratory. The evaluated results showed that all of the rapeseed endogenous reference high mobility group protein gene (HMG I/Y), figwort mosaic virus 35S (FMV 35S) promoter, and RT73 event-specific fragment could be detected from rapeseed samples at 0.1% (w/w) with a confidence level of more than 95%. All results from the 12 laboratories indicated that the developed method could be considered fit for the detection and identification of GM RT73 rapeseed.     

Validation of real-time PCR analyses for line-specific quantitation of genetically modified maize and soybean using new reference molecules

Novel analytical methods based on real-time quantitative polymerase chain reactions by use of new reference molecules were validated in interlaboratory studies for the quantitation of genetically modified (GM) maize and soy. More than 13 laboratories from Japan, Korea, and the United States participated in the studies. The interlaboratory studies included 2 separate stages: (1) measurement tests of coefficient values, the ratio of recombinant DNA (r-DNA) sequence, and endogenous DNA sequence in the seeds of GM maize and GM soy; and (2) blind tests with 6 pairs of maize and soy samples, including different levels of GM maize or GM soy. Test results showed that the methods are applicable to the specific quantitation of the 5 lines of GM maize and one line of GM soy. After statistical treatment to remove outliers, the repeatability and reproducibility of these methods at a level of 5.0% were <13.7 and 15.9%, respectively. The quantitation limits of the methods were 0.50% for Bt11, T25, and MON810, and 0.10% for GA21, Event176, and Roundup Ready soy. The results of blind tests showed that the numerical information obtained from these methods will contribute to practical analyses for labeling systems of GM crops.     

A new PCR-CGE (size and color) method for simultaneous detection of genetically modified maize events

We present a novel multiplex PCR assay for simultaneous detection of multiple transgenic events in maize. Initially, five PCR primers pairs specific to events Bt11, GA21, MON810, and NK603, and Zea mays L. (alcohol dehydrogenase) were included. The event specificity was based on amplification of transgene/plant genome flanking regions, i.e., the same targets as for validated real-time PCR assays. These short and similarly sized amplicons were selected to achieve high and similar amplification efficiency for all targets; however, its unambiguous identification was a technical challenge. We achieved a clear distinction by a novel CGE approach that combined the identification by size and color (CGE-SC). In one single step, all five targets were amplified and specifically labeled with three different fluorescent dyes. The assay was specific and displayed an LOD of 0.1% of each genetically modified organism (GMO). Therefore, it was adequate to fulfill legal thresholds established, e.g., in the European Union. Our CGE-SC based strategy in combination with an adequate labeling design has the potential to simultaneously detect higher numbers of targets. As an example, we present the detection of up to eight targets in a single run. Multiplex PCR-CGE-SC only requires a conventional sequencer device and enables automation and high throughput. In addition, it proved to be transferable to a different laboratory. The number of authorized GMO events is rapidly growing; and the acreage of genetically modified (GM) varieties cultivated and commercialized worldwide is rapidly increasing. In this context, our multiplex PCR-CGE-SC can be suitable for screening GM contents in food.     

Prevalence of Genetically Modified Rice, Maize, and Soy in Saudi Food Products

Qualitative and quantitative DNA-based methods were applied to detect genetically modified foods in samples from markets in the Kingdom of Saudi Arabia. Two hundred samples were collected from Al-Qassim, Riyadh, and Mahdina in 2009 and 2010. GMOScreen 35S and NOS test kits for the detection of genetically modified organism varieties in samples were used. The positive results obtained from GMOScreen 35S and NOS were identified using specific primer pairs. The results indicated that all rice samples gave negative results for the presence of 35S and NOS terminator. About 26 % of samples containing soybean were positive for 35S and NOS terminator and 44 % of samples containing maize were positive for the presence of 35S and/or NOS terminator. The results showed that 20.4 % of samples was positive for maize line Bt176, 8.8 % was positive for maize line Bt11, 8.8 % was positive for maize line T25, 5.9 % was positive for maize line MON 810, and 5.9 % was positive for StarLink maize. Twelve samples were shown to contain <3 % of genetically modified (GM) soy and 6 samples >10 % of GM soy. Four samples containing GM maize were shown to contain >5 % of GM maize MON 810. Four samples containing GM maize were shown to contain >1 % of StarLink maize. Establishing strong regulations and certified laboratories to monitor GM foods or crops in Saudi market is recommended.     

Mass spectrometric detection of CP4 EPSPS in genetically modified soya and maize

The potential of protein fractionation hyphenated to mass spectrometry (MS) to detect and characterize the transgenic protein present in Roundup Ready soya and maize has been investigated. Genetically modified (GM) soya and maize contain the 5-enolpyruvylshikimate-3-phosphate synthase (EPSPS) gene from Agrobacterium tumefaciens CP4, which confers resistance to the herbicide glyphosate. The GM soya and maize proteomes were fractionated by gel filtration, anion-exchange chromatography and sodium dodecyl sulfate/polyacrylamide gel electrophoresis (SDS-PAGE) prior to MS. This facilitated detection of a tryptic peptide map of CP4 EPSPS by matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) MS and nanoelectrospray ionization quadrupole time-of-flight (nanoESI-QTOF) MS. Subsequently, sequence information from the CP4 EPSPS tryptic peptides was obtained by nanoESI-QTOF MS/MS. The identification was accomplished in 0.9% GM soya seeds, which is the current EU threshold for food-labeling requirements.     

Detection and identification of multiple genetically modified events using DNA insert fingerprinting

Current screening and event-specific polymerase chain reaction (PCR) assays for the detection and identification of genetically modified organisms (GMOs) in samples of unknown composition or for the detection of non-regulated GMOs have limitations, and alternative approaches are required. A transgenic DNA fingerprinting methodology using restriction enzyme digestion, adaptor ligation, and nested PCR was developed where individual GMOs are distinguished by the characteristic fingerprint pattern of the fragments generated. The inter-laboratory reproducibility of the amplified fragment sizes using different capillary electrophoresis platforms was compared, and reproducible patterns were obtained with an average difference in fragment size of 2.4 bp. DNA insert fingerprints for 12 different maize events, including two maize hybrids and one soy event, were generated that reflected the composition of the transgenic DNA constructs. Once produced, the fingerprint profiles were added to a database which can be readily exchanged and shared between laboratories. This approach should facilitate the process of GMO identification and characterization.     

Characterization and event specific-detection by quantitative real-time PCR of T25 maize insert

T25 is one of the 4 maize transformation events from which commercial lines have so far been authorized in Europe. It was created by polyethylene glycol-mediated transformation using a construct bearing one copy of the synthetic pat gene associated with both promoter and terminator of the 35S ribosomal gene from cauliflower mosaic virus. In this article, we report the sequencing of the whole T25 insert and the characterization of its integration site by using a genome walking strategy. Our results confirmed that one intact copy of the initial construct had been integrated in the plant genome. They also revealed, at the 5' junction of the insert, the presence of a second truncated 35S promoter, probably resulting from rearrangements which may have occurred before or during integration of the plasmid DNA. The analysis of the junction fragments showed that the integration site of the insert presented high homologies with the Huck retrotransposon family. By using one primer annealing in the maize genome and the other in the 5' end of the integrated DNA, we developed a reliable event-specific detection system for T25 maize. To provide means to comply with the European regulation, a real-time PCR test was designed for specific quantitation of T25 event by using Taqman chemistry.     

A practical approach to screen for authorised and unauthorised genetically modified plants

In routine analysis, screening methods based on real-time PCR are most commonly used for the detection of genetically modified (GM) plant material in food and feed. In this paper, it is shown that the combination of five DNA target sequences can be used as a universal screening approach for at least 81 GM plant events authorised or unauthorised for placing on the market and described in publicly available databases. Except for maize event LY038, soybean events DP-305423 and BPS-CV127-9 and cotton event 281-24-236 × 3006-210-23, at least one of the five genetic elements has been inserted in these GM plants and is targeted by this screening approach. For the detection of these sequences, fully validated real-time PCR methods have been selected. A screening table is presented that describes the presence or absence of the target sequences for most of the listed GM plants. These data have been verified either theoretically according to available databases or experimentally using available reference materials. The screening table will be updated regularly by a network of German enforcement laboratories.     

Hexaplex PCR assay and liquid bead array for detection of stacked genetically modified cotton event 281-24-236×3006-210-23

A hexaplex system based on multiplex polymerase chain reaction (PCR) coupled with liquid bead array was developed to assist detection of stacked genetically modified (GM) cotton event 281-24-236 × 3006-210-23 (Widestrike) expressing two kinds of endotoxin from Bacillus thuringiensis (Bt). The efficiency of this multiplex detection system was assessed. Specific primer sets for simultaneous detection of six targets in the stacked GM cotton event were constructed and used for the PCR assay. Each of the six targets was amplified, and the amplicons could be separated as discrete bands by agarose gel electrophoresis. A liquid bead array assay for the stacked GM cotton was performed using the hexaplex PCR products followed by hybridization between the biotinylated targets and anti-tagged microsphere beads. The hybridization products produced fluorescent signals that were detected by the Luminex system. Signal strengths were analyzed by their median fluorescent intensity values. Comparison of the assays showed that results from the liquid bead array using specific probes agreed with those from the PCR, and detection of the different target elements was found to be very specific with no cross-reaction. Therefore, the combination of hexaplex PCR and liquid bead array for detection of stacked GM events can be a useful and efficient system for screening and analyzing multiple transgenes for simultaneous qualitative analysis.     

Development and validation of real-time PCR screening methods for detection of cry1A.105 and cry2Ab2 genes in genetically modified organisms

Primers and probes were developed for the element-specific detection of cry1A.105 and cry2Ab2 genes, based on their DNA sequence as present in GM maize MON89034. Cry genes are present in many genetically modified (GM) plants and they are important targets for developing GMO element-specific detection methods. Element-specific methods can be of use to screen for the presence of GMOs in food and feed supply chains. Moreover, a combination of GMO elements may indicate the potential presence of unapproved GMOs (UGMs). Primer-probe combinations were evaluated in terms of specificity, efficiency and limit of detection. Except for specificity, the complete experiment was performed in 9 PCR runs, on 9 different days and by testing 8 DNA concentrations. The results showed a high specificity and efficiency for cry1A.105 and cry2Ab2 detection. The limit of detection was between 0.05 and 0.01 ng DNA per PCR reaction for both assays. These data confirm the applicability of these new primer-probe combinations for element detection that can contribute to the screening for GM and UGM crops in food and feed samples.     

Ultra-fast simultaneous analysis of genetically modified organisms in maize by microchip electrophoresis with LIF detector

This study examined the potential of microchip electrophoresis (ME) with a LIF detector using a programmed field strength gradient (PFSG) in a conventional glass double-T microchip for the ultra-fast detection and simultaneous analysis of genetically modified (GM) maize. The separation efficiency and sensitivity at various sieving gels (poly(ethylene oxide) (PEO, M(r) 8,000,000) and 2-hydroxyethylcellulose (HEC) (M(r) 250,000)) and fluorescent dye concentrations were investigated. The PCR products of both the GM and non-GM maize were analyzed within 30 s under the PFSG (470.6 V/cm for 20 s, 117.6 V/cm for 12 s, and 470.6 V/cm for 30 s) with a 2.5% HEC sieving matrix in the running buffer, 1 x Tris-borate EDTA (TBE) (pH 8.30) and 0.5 ppm ethidium bromide. The five transgenic maize varieties (Event176, MON810, Bt11, GA21, and T25) examined in this study were also clearly differentiated by ME-PFSG within 30 s in a single run without any loss of resolution. The ME-PFSG technique is a powerful tool for the ultra-fast detection and simultaneous analysis of GMOs in a variety of foods including maize.     

Absolute quantification of genetically modified MON810 maize (Zea mays L.) by digital polymerase chain reaction

Quantitative analysis of genetically modified (GM) foods requires estimation of the amount of the transgenic event relative to an endogenous gene. Regulatory authorities in the European Union (EU) have defined the labelling threshold for GM food on the copy number ratio between the transgenic event and an endogenous gene. Real-time polymerase chain reaction (PCR) is currently being used for quantification of GM organisms (GMOs). Limitations in real-time PCR applications to detect very low number of DNA targets has led to new developments such as the digital PCR (dPCR) which allows accurate measurement of DNA copies without the need for a reference calibrator. In this paper, the amount of maize MON810 and hmg copies present in a DNA extract from seed powders certified for their mass content and for their copy number ratio was measured by dPCR. The ratio of these absolute copy numbers determined by dPCR was found to be identical to the ratios measured by real-time quantitative PCR (qPCR) using a plasmid DNA calibrator. These results indicate that both methods could be applied to determine the copy number ratio in MON810. The reported values were in agreement with estimations from a model elaborated to convert mass fractions into copy number fractions in MON810 varieties. This model was challenged on two MON810 varieties used for the production of MON810 certified reference materials (CRMs) which differ in the parental origin of the introduced GM trait. We conclude that dPCR has a high metrological quality and can be used for certifying GM CRMs in terms of DNA copy number ratio.     

Electrochemical detection of modified maize gene sequences by multiplexed labeling with osmium tetroxide bipyridine

In this report we demonstrate an approach for the electrochemical detection of four sequences from maize and genetically modified (GM) maize by means of square-wave voltammetry (SWV). After multiplexed labeling with osmium tetroxide bipyridine ([OsO₄(bipy)]), the target oligonucleotides are hybridized with a complementary DNA capture probe immobilized on gold electrodes. The multiplexed labeling was performed by mixing the four target strands with the respective oligonucleotides 80% homologous to the central target recognition sequences in order to protect the latter from binding of [OsO₄(bipy)] to its thymine or cytosine residues. All components were added to the same solution. No significant decreases in SWV hybridization signals were observed after such multiplexed labeling of up to four target strands in the same reaction batch. Obtained voltammetric signals were significantly higher at 50 °C compared to 25 °C hybridization temperature and very low response was observed for non-complementary strands. Multiplexed labeling with osmium tetroxide bipyridine holds great promise for the development of simple and effective voltammetric detection protocols for GM organisms.     

An optimal design method for preventing air bubbles in high-temperature microfluidic devices

DNA analysis with the polymerase chain reaction (PCR) has become a routine part of medical diagnostics, environmental inspections, food evaluations, and biological studies. Furthermore, the development of a microscale PCR chip is an essential component of studies aimed at integrating PCR into a micro total analysis system (μ-TAS). However, the occurrence of air bubbles in microchannels complicates this process. In this study, we investigated a new technique based on the fluid dynamics of laminar flow that utilizes a small amount of mineral oil at the beginning of sample injection to prevent air bubbles from occurring in microchannels. We also further optimized the pressure, the length of the pressurizing channel and the volume of oil, thus making our microfluidic device more useful for high-temperature PCR. Additionally, quantitative continuous-flow PCR was performed using the optimized PCR chip in order to detect genetically modified (GM) maize. DNA was extracted from GM maize, MON 810, and non-GM maize at several concentrations from 0% (w/v) to 100% (w/v). The DNA amplification signals were then analyzed on the PCR chip using a laser-based system. The signal from our microfluidic PCR chip was found to increase in direct proportion to the initial GM maize concentration.     

Increased efficacy for in-house validation of real-time PCR GMO detection methods

To improve the efficacy of the in-house validation of GMO detection methods (DNA isolation and real-time PCR, polymerase chain reaction), a study was performed to gain insight in the contribution of the different steps of the GMO detection method to the repeatability and in-house reproducibility. In the present study, 19 methods for (GM) soy, maize canola and potato were validated in-house of which 14 on the basis of an 8-day validation scheme using eight different samples and five on the basis of a more concise validation protocol. In this way, data was obtained with respect to the detection limit, accuracy and precision. Also, decision limits were calculated for declaring non-conformance (>0.9%) with 95% reliability. In order to estimate the contribution of the different steps in the GMO analysis to the total variation variance components were estimated using REML (residual maximum likelihood method). From these components, relative standard deviations for repeatability and reproducibility (RSD_r and RSD_R) were calculated. The results showed that not only the PCR reaction but also the factors ‘DNA isolation’ and ‘PCR day’ are important factors for the total variance and should therefore be included in the in-house validation. It is proposed to use a statistical model to estimate these factors from a large dataset of initial validations so that for similar GMO methods in the future, only the PCR step needs to be validated. The resulting data are discussed in the light of agreed European criteria for qualified GMO detection methods.