Fabrication of sub-micrometer-sized jingle bell-shaped hollow spheres from multilayered core-shell particles

Jingle bell-shaped hollow spheres were fabricated starting from multilayered particles composed of a silica core, a polystyrene inner shell, and a titania outer shell. Composite particles of silica core-polystyrene shell, synthesized by coating a 339-nm-sized silica core with a polystyrene shell of thickness 238 nm in emulsion polymerization, were used as core particles for a succeeding titania-coating. A sol-gel method was employed to form the titania outer shell with a thickness of 37 nm. The inner polystyrene shell in the multilayered particles was removed by immersing them in tetrahydrofuran. These successive procedures could produce jingle bell-shaped hollow spheres that contained a silica core in the titania shell.     

Synthesis of zwitterionic shell cross-linked micelles with pH-dependent hydrophilicity

Synthesis of bi-functional silica particles by a simple wet chemical method is described where the mixture of ultra fine nanoparticles (1-3 nm) of titania and silver were attached on the silica particle surface in a controlled way to form a core-shell structure. The silica surface showed efficient bi-functional activity of photo-catalytically self cleaning and antibacterial activity due to nanotitania and nanosilver mutually benefiting each other's function. The optimum silver concentration was found where extremely small silver nanoparticles are formed and the total composite particle remains white in color. This is an important property in view of certain applications such as antibacterial textiles where the original fabric color has to be retained even after applying the nanosilver on it. The particles were characterized at each step of the synthesis by X-ray photoelectron spectroscopy, UV-visible spectroscopy, X-ray diffraction, scanning electron microscopy, transmission electron microscopy and electron energy loss spectroscopy. Bi-functional silica particles showed accelerated photocatalytic degradation of methylene blue as well as enhanced antibacterial property when tested as such particles and textiles coated with these bi-functional silica particles even at lower silver concentration.     

Facile synthesis of silver core - silica shell composite nanoparticles

Combining metal nanoparticles and dielectrics (e.g. silica) to produce composite materials with high dielectric constant is motivated by application in energy storage. Control over dielectric properties and their uniformity throughout the composite material is best accomplished if the composite is comprised of metal core - dielectric shell structured nanoparticles with tunable dimensions. We have synthesized silver nanoparticles in the range of 40-100nm average size using low concentration of saccharide simultaneously as the reducing agent and electrostatic stabilizer. Coating these silver particles with silica from tetraalkoxysilanes has different outcomes depending on the alcoholic solvent and the silver particle concentration. A common issue in solution-based synthesis of core-shell particles is heterogeneous nucleation whereupon two populations are formed: the desired core-shell particles and undesired coreless particles of the shell material. We report the formation of Ag@SiO(2) core-shell particles without coreless silica particles as the byproduct in 2-propanol. In ethanol, it depends on the silver surface area available whether homogeneous nucleation of silica on silver is achieved. In methanol and 1-butanol, core-shell particles did not form. This demonstrates the significance of controlling the tetraalkoxysilane hydrolysis rate when growing silica shells on silver nanoparticles.     

Fabrication of hydroxyl group modified monodispersed hybrid silica particles and the h-SiO(2)/TiO(2) core/shell microspheres as high performance photocatalyst for dye degradation

The monodisperse hybrid silica particles (h-SiO(2)) were firstly prepared by a modified sol-gel process and the surface was modified in situ with double bonds, then abundant carboxyl moieties were introduced onto the surface of the silica core via thiol-ene click reaction. Afterward, the h-SiO(2)/TiO(2) core/shell microspheres were prepared by hydrolysis of titanium tetrabutoxide (TBOT) via sol-gel process in mixed ethanol/acetonitrile solvent, in which the activity of TBOT could be easily controlled. The carboxyl groups on the surface of silica particles promote the formation of a dense and smooth titania layer under well control, and the layer thickness of titania could be tuned from 12 to 100nm. The well-defined h-SiO(2)/TiO(2) core/shell structures have been confirmed by electron microscopy and X-ray photoelectron spectroscopy studies. After calcination at 500°C for 2h, the amorphous TiO(2) layer turned into anatase titania. These anatase titania-coated silica particles showed good photocatalytic performance in degradation of methyl orange aqueous solution under UV light.     

Silica–silver core–shell particles for antibacterial textile application

The silica–silver core–shell particles were synthesized by simple one pot chemical method and were employed on the cotton fabric as an antibacterial agent. Extremely small (1–2 nm) silver nanoparticles were attached on silica core particles of average 270 nm size. The optimum density of the nano silver particles was found which was sufficient to show good antibacterial activity as well as the suppression in their surface plasmon resonance responsible for the colour of the core–shell particle for antibacterial textile application. The change in the density and size of the particles in the shell were monitored and confirmed by direct evidence of their transmission electron micrographs and by studying surface plasmon resonance characteristics. The colony counting method of antibacterial activity testing showed excellent results and even the least silver containing core–shell particles showed 100% activity against bacterial concentration of 10⁴ colony counting units (cfu). The bonding between core–shell particles and cotton fabric was examined by X-ray photoelectron spectroscopy. The antibacterial activity test confirmed the firm attachment of core–shell particles to the cotton fabric as a result 10 times washed sample was as good antibacterial as that of unwashed sample. The bacterial growth was inhibited on and beneath the coated fabric, at the same time no zone of inhibition which occurs due to the migration of silver ions into the medium was observed indicating immobilization of silver nanoparticles on silica and core–shell particles on fabric by strong bonding.     

Fabrication of hollow titania microspheres with tailored shell thickness

Submicron hollow spheres are an interesting class of materials that receive significant attention nowadays. Closed and mechanically robust homogeneous hollow titania microspheres with as much shell thickness as 130 nm were fabricated by coating polystyrene beads with titania nanoparticles using sol–gel chemistry and subsequently removing the core either via heating or a chemical dissolution process. The thickness of the titania shell deposited on polystyrene core was finely tuned between 100 and 130 nm by varying the concentration of titania precursor, i.e., Ti(OEt)₄ salt from 0.5 to 2 mM during the coating process. The obtained hybrid core–shell particles and hollow microspheres were characterized by scanning electron microscopy, transmission electron microscopy, infrared spectroscopy, X-ray diffraction, and thermo-gravimetric analysis. The approach employed is well suited to the preparation of titania-coated polystyrene hybrid particles and hollow titania spheres, which can find their applications as novel building blocks with unique optical properties for fabrication of advanced materials, catalyst, and drug delivery system.     

Preparation of highly dispersed core/shell-type titania nanocapsules containing a single Ag nanoparticle

Core/shell-type titania nanocapsules containing a single Ag nanoparticle were prepared. Ag nanoparticles were prepared using the reduction of silver nitrate with hydrazine in the presence of cetyltrimethylammonium bromide (CTAB) as protective agent. The sol-gel reaction of titanium tetraisopropoxide (TTIP) was used to prepare core/shell-type titania nanocapsules with CTAB-coated Ag nanoparticles as the core. TEM observations revealed that the size of the core (Ag particle) and the thickness of the shell (titania) of the core/shell particles obtained are about 10 nm and 5-10 nm, respectively. In addition, the nanocapsules were found to be dispersed in the medium as individual particles without aggregation. Moreover, titania coating caused the surface plasmon absorption of Ag nanoparticles to shift toward the longer wavelength side.     

Synthesis and Electrorheological Properties of LTNO-PS Composites

Core-shell structural Li and Ti co-doped NiO/polystyrene samples (LTNO/PS) were synthesized by a sol-gel method and studied by TEM, X-ray diffraction, IR spectroscopy and LCR meter. It was found that the core-shell LTNO/PS particles are nearly smooth spheres with an average size of around 4.0 mm, while the LTNO particles alone have a size of around 3.5 mm. The electrorheological activity of LTNO particles with PS coating is larger than that of the bare ones with the same components. This research reveals that the high dielectric constant and corresponding dielectric loss of the LTNO is related to the Li and Ti contents. The increase of electrorheological activity of LTNO particles with PS coating is caused by the increase of dielectric permittivity, the surface structural change, and the reduction of leakage current of PS-coated samples due to the high resistivity and soft contacting of PS shell. By the preparation of core/shell structural materials and taking the advantage of the shell to reduce the leakage current between the particles, the electrorheological effect can be effectively increased.     

Probing the surfaces of core‐shell and hollow nanoparticles by solvent relaxation NMR

Measurement of the spin–spin NMR relaxation time (or its inverse, the rate) of water molecules in aqueous nanoparticle dispersions has become a popular approach to probe of the nature and structure of the particle surface and any adsorbed species. Here, we report on the characterisation of aqueous dispersions of hollow amorphous nanoparticles that have two liquid accessible surfaces (inner cavity surface and outer shell surface) plus the solid (silica) and core‐shell (titania–silica) nanoparticle precursors from which the hollow particles have been prepared. In all cases, the observed water relaxation rates scale linearly with particle surface area, with the effect being more pronounced with increasing levels of titania present at the particle surface. Two distinct behaviours were observed for the hollow nanoparticles at very low volume fractions, which appear to merge with increasing surface area (particle concentration). Herewith, we further show the versatility of solvent NMR spectroscopy as a probe of surface character.     

Synthesis of titania-silica core-shell microspheres via a controlled interface reaction in a microfluidic device

In this work, we describe a novel, simple microfluidic method for fabricating titania-silica core-shell microspheres. Uniform droplets of silica sol were dispersed into an oil phase containing tetrabutyl titanate via a coaxial microfluidic device. The titanium alkoxide hydrolyzed at the water-oil interface after the formation of the aqueous droplets. A gel shell containing the titanium hydroxide formed around the droplets, and the titania-silica core-shell microspheres were obtained after calcinations. The X-ray diffraction results show that titania coatings crystallized into a pure anatase structure. The scanning electron microscopy and energy-dispersive spectrometry characterization shows that the microspheres are monodispersed with uniform titania coating on the surface. The dispersity and size of the microspheres could easily be controlled by changing the microfluidic flow parameters. The titania content on the surface could be adjusted in the large range of 1.0-98.0 mol % by varying the continuous phase composition and the reaction time, and the structures of the core-shell microshperes could also be controlled.     

Molecular selective photocatalysis by TiO2/nanoporous silica core/shell particulates

The coating of TiO(2) particles (P25) by a nanoporous silica layer was conducted to impart molecular recognitive photocatalytic ability. TiO(2)/nanoporous silica core/shell particles with varied pore diameters of the shell were synthesized by the reaction of P25 with an aqueous mixture of tetraethoxysilane and alkyltrimethylammonium chloride with varied alkyl chain lengths, followed by calcination. The TEM and nitrogen adsorption/desorption isotherms of the products showed that a nanoporous silica shell with a thickness of ca. 2nm and controlled pore diameter (1.2, 1.6, and 2.7 nm) was deposited on the titania particle when surfactants with different alkyl chain lengths (C12, C16 and C22) were used. The water vapor adsorption/desorption isotherms of the core/shell particles revealed that a larger amount of water adsorbed on the core/shell particles when the pore diameter is larger. The (29)Si MAS NMR spectra of the core/shell particles showed that the amount of surface silanol groups was independent of the water vapor adsorption capacity of the products. The possible molecular recognitive photocatalysis on the products was investigated under UV irradiation using two kinds of aqueous mixtures containing different organic compounds with varied sizes and functional groups: a 4-butylphenol, 4-hexylphenol, and 4-nonylphenol mixture and a 2-nitrophenol, 2-nitro-4-phenylphenol, and 4-nitro-2,6-diphenylphenol mixture. It was found that the core/shell particles exhibited selective adsorption-driven molecular recognitive photocatalytic decomposition of 4-nonylphenol and 2-nitrophenol in the two mixtures.     

Reverse microemulsion-mediated synthesis of silica-coated gold and silver nanoparticles

A reverse microemulsion method is reported for preparing monodispersed silica-coated gold (or silver) nanoparticles without the use of a silane coupling agent or polymer as the surface primer. This method enables a fine control of the silica shell thickness with nanometer precision. As compared to the St?ber method reported for direct silica coating, which can only coat large gold particles ( approximately 50 nm in diameter) at low concentrations (<1.5 x 10(10) particles/mL), this new approach is capable of coating gold particles of a wide range of sizes (from 10 to 50 nm) at a much higher concentration ( approximately 1.5 x 10(13) particles/mL). Moreover, it enables straightforward surface functionalization via co-condensation between tetraethyl orthosilicate and another silane with the desired functional groups. The functional groups introduced by this method are readily accessible and thus useful for various applications.     

Synthesis of Submicron-Sized Titania-Coated Silica Particles with a Sol-Gel Method and Their Application to Colloidal Photonic Crystals

A previously proposed method for preparing monodispersed titania particles was extended to preparation of titania-coated silica spherical particles. The core silica particles with an average size of 264 nm were prepared with Stöber method. The titania-coating was performed in ethanol/acetonitrile solvent in the presence of silica particles by a sol-gel method with the use of titanium tetraisopropoxide (TTIP) and methylamine (MA) catalyst. Average size of the silica-titania particles decreased from 457 to 292 nm with an increase in concentration of silica particles. Coefficient of variation for the particle size was less than 5%. Colloidal crystals could be fabricated with a dip-coating technique and a sedimentation process, respectively. Measurements of reflectance revealed peaks based on the Bragg diffraction. Those peaks red-shifted with an increase in titania shell thickness because of a high refractive index of titania. Annealing at high temperature transformed crystal structure of titania shell from amorphous to anatase (500°C) and rutile (1000°C), which led to red-shift of reflection peak because of an increase in refractive index of titania due to the crystallization.     

Fabrication of magnetically separable mesostructured silica with an open pore system

Magnetically separable mesostructured silica with an unobstructed pore system was fabricated through the deposition of cobalt nanoparticles on the outer surface of the submicron-sized silica particles. These cobalt nanoparticles were further protected by a nanometer-thick carbon shell against acid erosion. Due to the fact that the magnetic particles are grafted on the outer surface of the porous silica, the pores are still accessible for further modification, which could widen the application range of porous silica.     

Cellulose nanocrystal submonolayers by spin coating

Dilute concentrations of cellulose nanocrystal solutions were spin coated onto different substrates to investigate the effect of the substrate on the nanocrystal submonolayers. Three substrates were probed: silica, titania, and amorphous cellulose. According to atomic force microscopy (AFM) images, anionic cellulose nanocrystals formed small aggregates on the anionic silica substrate, whereas a uniform two-dimensional distribution of nanocrystals was achieved on the cationic titania substrate. The uniform distribution of cellulose nanocrystal submonolayers on titania is an important factor when dimensional analysis of the nanocrystals is desired. Furthermore, the amount of nanocrystals deposited on titania was multifold in comparison to the amounts on silica, as revealed by AFM image analysis and X-ray photoelectron spectroscopy. Amorphous cellulose, the third substrate, resulted in a somewhat homogeneous distribution of the nanocrystal submonolayers, but the amounts were as low as those on the silica substrate. These differences in the cellulose nanocrystal deposition were attributed to electrostatic effects: anionic cellulose nanocrystals are adsorbed on cationic titania in addition to the normal spin coating deposition. The anionic silica surface, on the other hand, causes aggregation of the weakly anionic cellulose nanocrystals which are forced on the repulsive substrate by spin coating. The electrostatically driven adsorption also influences the film thickness of continuous ultrathin films of cellulose nanocrystals. The thicker films of charged nanocrystals on a substrate of opposite charge means that the film thickness is not independent of the substrate when spin coating cellulose nanocrystals in the ultrathin regime (<100 nm).     

Nanocopying of individual DNA strands and formation of the corresponding surface pattern of titania nanotube

Titania nanotube was prepared by nanocopying of the individual DNA double strand as template. DNA was first spread on a solid substrate, and its molecular surface was coated with an ultrathin titania layer by 3 cycles of the surface sol-gel process. Fluorescence microscopic images before and after titania coating of the DNA/YOYO-1 complex were essentially identical, showing that the titania coating did not change the chemical properties of the complex. Titania coating effectively prohibited chemical degradation of titania-coated DNA with DNase I and physically separated the DNA strand from the surrounding environment with an ultrathin titania barrier. The morphology of the DNA strand was preserved, as confirmed by microscopic and spectroscopic observations. The presence of the hollow (tubular) structure was confirmed by a silver staining experiment coupled with scanning transmission electron microscopy-energy-dispersive X-ray spectroscopy (STEM-EDX) analysis. The present finding shows the effectiveness of nanocopying of the individual DNA strand.     

应用于热控的壳厚可控核壳结构SiO2@TiO2颗粒制备

利用St觟ber方法合成了平均粒径在800 nm,球形度、单分散性良好的SiO2微球,再将其作为制备核壳结构SiO2@TiO2颗粒的内核。利用钛酸四丁酯水解反应,在SiO2内核上包覆制备了壳厚在30～100 nm的TiO2壳层,TiO2壳层厚度可根据水解反应中钛酸四丁酯的量调控。将制得的SiO2@TiO2核壳结构颗粒在550℃煅烧1 h,氧化钛壳层的晶型转变为锐钛矿相,晶型转变为锐钛矿相的TiO2更适合作为填料应用于近红外反射涂层。本文合成厚度可控SiO2@TiO2微球的方法是一种改进的溶胶凝胶方法,即在溶胶凝胶方法的基础上增加水热合成工艺。另外,本合成方法工艺简单,无表面活性剂或者耦合剂的引入。     

Characterization of silica-coated tobacco mosaic virus

The deposition of silica on the surface of tobacco mosaic virus (TMV) is achieved at a higher pH (>7) as a means to enhance its usefulness as a template for the synthesis of nanostructures. Electron energy loss spectroscopy definitively shows the presence of a silica shell on the surface of the TMV while small angle X-ray scattering differentiates successfully between silica-coated TMV and silica particles in the presence of uncoated TMV. Importantly, coating reactions done in a 50% w/v methanol/water solution produce smaller silica nanostructures during the condensation of the hydrolysis intermediates, possibly aiding in obtaining uniform coating. Furthermore, TMV-templated silica coatings are found to enhance the stability of the virus particle in methanol at conditions that would ordinarily disrupt the assembled particle. Combined these findings demonstrate that TMV can function as an efficient template for the controlled deposition of silica at neutral pH.     

Catalytic activity during copolymerization of ethylene and 1-hexene via mixed TiO2/SiO2-supported MAO with rac-Et[Ind]2ZrCl2 metallocene catalyst

Activities during ethylene/1-hexene copolymerization were found to increase using the mixed titania/silica-supported MAO with rac-Et[Ind]2ZrCl2 metallocene catalyst. Energy Dispersive X-ray spectorcopy (EDX) indicated that the titania was apparently located on the outer surface of silica and acted as a spacer to anchor MAO to the silica surface. IR spectra revealed the Si-O-Ti stretching at 980 cm(-1) with low content of titania. The presence of anchored titania resulted in less steric hindrance and less interaction due to supporting effect.