Poly(siloxane‐urethane) crosslinked structures obtained by sol‐gel technique

Poly(siloxane‐urethane) crosslinked structures were prepared from isophorone diisocyanate, α,ω‐bis(hydroxybutyl)oligodimethylsiloxane and a new hybrid diol containing hydrolysable Si? OC₂H₅ groups besides OH groups. The latest was synthesized by the acid‐catalyzed reaction between 1,3‐bis(3‐glycidoxypropyl)tetramethyldisiloxane and 3‐aminopropyltriethoxysilane. The formations of the urethane groups along the polymer backbone as well as the formation of the silica domains were first confirmed by the presence of the specific bands in Fourier transform infrared spectra. The resulted materials were characterized using differential scanning calorimetry, thermogravimetric analysis and scanning electron microscopy. The results of the dynamic mechanical analysis (DMA) performed at various frequencies revealed shape memory capabilities for some of the obtained structures. The silica formed because of the hydrolysis‐condensation reactions proved to have reinforcing effect upon siloxane‐urethane structure also evidenced by DMA and increasing water vapor sorption capacity as was measured by dynamic vapor sorption. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Coordination polymers of copper(II) with some dicarboxysiloxane ligands

Several new coordination polymers of copper(II) with different carboxylate ligands containing siloxane units were synthesized by equilibrium polycoordination reactions of copper(II) acetate with the proper dicarboxylic acid (i.e. 1,3‐bis(3‐carboxypropyl)tetramethyldisiloxane, α,ω‐bis(3‐carboxypropyl)oligodimethylsiloxane, and 1,3‐bis(sebacomethyl)tetramethyldisiloxane) in solution (methanol), at room temperature. Some variations in the feed molar ratios were made. The resulting polymers having a polycoordination degree between 5 and 71 are soluble in a wide range of common organic solvents. The formation of polymers was proved by IR and UV–VIS absorption spectroscopy. The thermal behaviour of the coordination polymers was analysed by thermogravimetry in air. The silicon and copper contents and inherent viscosities were also determined. Copyright © 2002 John Wiley & Sons, Ltd.     

From Polymer to Monomer: Cleavage and Rearrangement of Si‐O‐Si Bonds after Oxidation Yielded an Ordered Cyclic Crystallized Structure

Polymerization reactions are very common in the chemical industry, however, the reaction in which monomers are obtained from polymers is rarely invesitgated. This work reveals for the first time that oxone can break the Si‐O‐Si bond and induce further rearrangement to yield an ordered cyclic structure. The oxidation of P1 , which is obtained by reaction of 2,2′‐1,2‐ethanediylbis(oxy)bis(ethanethiol) (DBOET) with 1,3‐divinyl‐1,1,3,3‐tetramethyldisiloxane (MM^Vi), with oxone yielded cyclic crystallized sulfone–siloxane dimer ( P1‐ox ) after unexpected cleavage and rearrangement of the Si‐O‐Si bond.     

Ionic organic/inorganic materials. I. Novel cationic siloxane copolymers containing quaternary ammonium salt groups in the backbone

The synthesis and characterization of some novel cationic siloxanes copolymers containing quaternary ammonium salt (QAS) groups in the backbone is reported in this article. One cationic oligomer having QAS in the backbone and reactive groups like 2,3‐epoxypropyl and 2‐hydroxy‐3‐chloropropyl (RCO) as well as 1,3‐bis(3‐aminopropyl)tetramethyldisiloxane or α,ω‐bis(3‐aminopropyl)oligodimethylsiloxane (AP) were used as precursors for this goal. Elemental analysis, IR and ¹H NMR spectroscopy, thermogravimetric analysis, and X‐ray photoelectron spectroscopy were used to characterize the obtained copolymers. The thermal stability of the cationic siloxane copolymer increased when the siloxane oligomer having a high number of siloxane units in the chain (AP) was used as a precursor. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3570–3578, 2002     

Shape memory polybenzoxazines based on a siloxane‐containing diphenol

A siloxane‐containing diphenol is synthesized from 1,1,3,3‐tetramethyldisiloxane and o‐allylphenol, followed by the Mannich condensation with aniline, methylamine, and formaldehyde yielding two siloxane‐containing benzoxazines. The onset polymerization temperature of aniline‐based benzoxazine is higher than that of the methylamine counterpart. The dynamic mechanical properties of the polybenzoxazines depend on the structure of the starting primary amines. Both polybenzoxazines exhibit one‐way dual‐shape memory behavior in response to changes in temperature, and they show excellent shape fixity ratios in bending, tension, and tensile stress–strain tests, high shape recovery ratios in bending and tension tests, but relatively low shape recovery ratios in tensile stress–strain test. The network chain segments including the alkylsiloxane units serve as a thermal control switch based on the glass transition temperatures (39 and 53 °C) for the polybenzoxazines. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1255–1266     

Association phenomena of the ferrocenylsiloxane polyamide in solution

A ferrocenyl‐siloxane polyamide, poly{1,1′‐ferrocene‐diamide‐[1,3‐bis(propylene)tetramethyldisiloxane]}, FAS, prepared by polycondensation in solution (methylene chloride) of 1,1′‐di(chlorocarbonyl)ferrocene with 1,3‐bis(aminopropyl)tetramethyldisiloxane has been dissolved in various concentrations in the range 0–1.5 g/dL in dimethylformamide. The solutions were investigated by tensiometry, viscometry, and UV–vis spectrophotometry at different temperatures. The results suggested the association occurrence, depending on the two parameters (concentration and temperature). The aggregates formation and their sizes were emphasized by dynamic light scattering and scanning electron microscopy. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5845–5852, 2009     

Chelate Polymers. V. Novel Alternating Copolymers Based on Transition Metal–Azomethine Complexes and Siloxanes

Abstract

The Schiff base of 2,4‐dihydroxybenzaldehyde with ethylenediamine has been prepared and complexed with two different divalent metals: Cu(II) and Ni(II). The resulting bisphenolic chelates were inserted in new alternating polymeric structures by their polycondensation with 1,3‐bis‐(chloromethyl)‐1,1,3,3‐tetramethyldisiloxane or α, ω‐bis(chloromethyl)oligodimethylsiloxanes having different numbers of siloxane units in the chains. In order for their activation, the chelates were converted in salt forms by previously treating them with a NaOH 0.1 N solution or in situ in the presence of anhydrous K₂CO₃. DMF was used as a solvent. The structures of the ligand, complexes, and polymers obtained on their basis were confirmed by IR, UV, and ¹H NMR. Characterization was undertaken by thermogravimetric analysis (TGA), solubility tests, and viscosity measurements.     

Synthesis and thermal crosslinking of benzophenone‐modified poly(dimethylsiloxane)s

Dihydridocarbonyltris(triphenylphosphine)ruthenium catalyzes the regiospecific anti‐Markovnikov addition of an ortho C? H bond of benzophenone across the C? C double bonds of α,ω‐bis(trimethylsilyloxy)copoly(dimethylsiloxane/vinylmethylsiloxane) (99:1), α,ω‐bis(vinyldimethylsilyloxy)poly(dimethylsiloxane), and 1,3‐divinyltetramethyldisiloxane to yield α,ω‐bis(trimethylsilyloxy)copoly[dimethylsiloxane/2‐(2′‐benzophenonyl)ethylmethylsiloxane]), α,ω‐bis[2‐(2′‐benzophenonyl)ethyldimethylsilyloxy]poly(dimethylsiloxane), and 1,3‐bis[2‐(2′‐benzophenonyl)ethyl]tetramethyldisiloxane, respectively. These materials have been characterized with ¹H, ¹³C, and ²⁹Si NMR and IR spectroscopy. Their molecular weight distributions have been determined by gel permeation chromatography. The thermal stability of the polymers has been measured by thermogravimetric analysis, and their glass‐transition temperatures (T_g's) have been determined by differential scanning calorimetry. The molecular weight distribution, thermal stability, and T_g's of the modified polysiloxanes are similar to those of the precursor polymers. The molecular weights of these materials can be significantly increased via heating to 300 °C for 1 h. This may be due to crosslinking, by pyrocondensation, of pendant anthracene groups, which are produced by the pyrolysis of the attached ortho‐alkyl benzophenones. UV spectroscopy of the pyrolysate of 1,3‐bis[2‐(2′‐benzophenonyl)ethyl]tetramethyldisiloxane has confirmed the presence of pendant anthracene groups. Thermal crosslinking by the pyrocondensation of pendant anthracene groups has been verified by the pyrolysis of α,ω‐bis(trimethylsilyloxy)copoly[dimethylsiloxane/2‐(9′‐anthracenyl)ethylmethylsiloxane] (97:3). © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5514–5522, 2004     

Silicon‐containing benzoxazines and their polymers: Copolymerization and copolymer properties

A silicon‐containing benzoxazine BATMS‐Bz (1,3‐bis(3‐aminopropyl)tetramethyldisiloxane‐benzoxazine) was used for polybenzoxazine modification by means of formation of benzoxazine copolymers with 3,4‐dihydro‐3‐phenyl‐2H‐1,3‐benzoxazine (Ph‐Bz) and 3‐furfuryl‐3,4‐dihydro‐2H‐1,3‐benzoxazine (F‐Bz), respectively. Ph‐Bz/BATMS‐Bz copolymers showed a positive deviation due the presence of intermolecular hydrogen bonding. However, this effect was not observed with F‐Bz/BATMS‐Bz copolymers. Meanwhile, BATMS‐Bz incorporation exhibited significant effect on toughening polybenzoxazines. It is therefore demonstrated that BATMS‐Bz is a high performance modifier to simultaneously enhance the T_g and toughness of polybenzoxazines. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1007–1015, 2007     

Semi‐interpenetrating polymer networks composed of poly(N‐isopropyl acrylamide) and polyacrylamide hydrogels

Three series of semi‐interpenetrating polymer networks, based on crosslinked poly(N‐isopropyl acrylamide) (PNIPA) and 1 wt % nonionic or ionic (cationic and anionic) linear polyacrylamide (PAAm), were synthesized to improve the mechanical properties of PNIPA gels. The effect of the incorporation of linear polymers into responsive networks on the temperature‐induced transition, swelling behavior, and mechanical properties was studied. Polymer networks with four different crosslinking densities were prepared with various molar ratios (25:1 to 100:1) of the monomer (N‐isopropyl acrylamide) to the crosslinker (methylenebisacrylamide). The hydrogels were characterized by the determination of the equilibrium degree of swelling at 25 °C, the compression modulus, and the effective crosslinking density, as well as the ultimate hydrogel properties, such as the tensile strength and elongation at break. The introduction of cationic and anionic linear hydrophilic PAAm into PNIPA networks increased the rate of swelling, whereas the presence of nonionic PAAm diminished it. Transition temperatures were significantly affected by both the crosslinking density and the presence of linear PAAm in the hydrogel networks. Although anionic PAAm had the greatest influence on increasing the transition temperature, the presence of nonionic PAAm caused the highest dimensional change. Semi‐interpenetrating polymer networks reinforced with cationic and nonionic PAAm exhibited higher tensile strengths and elongations at break than PNIPA hydrogels, whereas the presence of anionic PAAm caused a reduction in the mechanical properties. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3987–3999, 2004     

Various silicon‐containing polymers with Si(H)?CC units

Nine new kinds of thermosetting polymers with the Si(H)? C?C unit were synthesized by dehydrogenative polycondensation reactions between hydrosilanes and diethynyl compounds in the presence of a magnesia catalyst. Phenylsilane, silane, vinylsilane, and n‐octylsilane were used as the hydrosilanes, and 1,3‐diethynylbenzene, 1,4‐diethynylbenzene, 4,4′‐diethynyldiphenyl ether, and 1,3‐diethynyl‐1,1,3,3‐tetramethyldisiloxane were used as the diethynyl compounds. All the polymers were thermosetting, highly heat‐resistant, easily soluble in a solvent, and moldable. In particular, ? Si(R)H? C?C? C₆H₄? C?C? (R = H or CH?CH₂) showed high thermal stability; the temperature of 5% weight loss was greater than 800 °C, and the residue at 1000 °C was over 90%. The thermal stabilities of the polymers were attributed to the crosslinking reaction of the Si? H and C?C bonds. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2658–2669, 2001     

Chelate polymers: II. Some novel transition metals complexes with azomethine‐containing siloxanes and their polyesters

New Schiff bases of 2,4‐dihydroxybenzaldehyde with siloxane‐α,ω‐diamines having different numbers of siloxane units in the chain have been synthesized and characterized by spectroscopy, elemental and thermal analyses. These azomethines were found to form complexes readily with copper(II), nickel(II), cobalt(II), cadmium(II) and zinc(II). From IR and UV–Vis studies, the phenolic oxygen and imine nitrogen of the ligand were found to be the coordination sites. Thermogravimetric analysis (TGA) data indicate the chelates to be more stable than the corresponding ligands. The melting points increase with shortening of the siloxane segment from azomethine, as well as the result of complexation. The chelates obtained were covalently inserted in polymeric linear structures by polycondensation through the OH‐difunctionalized ligand with 1,3‐bis(carboxypropyl)tetramethyldisiloxane. Direct polycondensation, assisted either by acetic anhydride or N,N′‐dicyclohexylcarbodiimide as dehydrating agent and the complex 4‐(dimethylamino)pyridinium 4‐toluenesulfonate as catalyst, was used for the synthesis of these compound types. The structures of the polymers obtained were confirmed by IR, UV and ¹H NMR. Characterization was undertaken by TGA, solubility tests and viscosity measurements. Copyright © 2003 John Wiley & Sons, Ltd.     

Isomerization polymerization and copolymerization of glycidyl alkanoates catalyzed by methylaluminum bis(2,6‐di‐t‐butyl‐4‐methylphenoxide)

The isomerization polymerizations of glycidyl propionate (1b), octanoate (1c), and stearate (1d) with methylaluminum bis(2,6‐di‐tert‐butyl‐4‐methylphenoxide) (3) were investigated. The polymerizations selectively gave poly(2‐alkyl‐1,3‐dioxolane‐4,2‐diyloxymethylene)s (2), although the polymer yield as well as the polymer molecular weight significantly decreased as the acyl chain of 1 was lengthened. These polymers readily hydrolyzed to glycerin and the corresponding fatty acids under mild conditions. The copolymerizations of glycidyl acetate (1a) with these monomers were also examined. In any combination, the composition of the obtained copolymer was essentially identical with the feed ratio, while both copolymer yield and molecular weight decreased as the feed of 1a was decreased. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 435–444, 1999 (See graphics.)     

Synthesis of thermosensitive guar‐based hydrogels with tunable physico‐chemical properties by click chemistry

Thermosensitive guar‐based hydrogels are obtained in water solutions by copper‐catalyzed 1,3‐dipolar cycloaddition between alkyne‐functionalized guars and α,ω‐diazido‐poly[(ethylene glycol)‐co‐(propylene glycol)]. Characterization by TGA, HR‐MAS ¹H NMR, and rheology have shown that hydrogels with tunable physico‐chemical properties, such as crosslinking density, viscoelasticity, swelling ratio, and so forth, could be obtained by varying the guar molar mass, the degree of alkyne functionality, the guar/crosslinker weight ratio, and the reaction temperature. Based on swelling measurements, it has been shown that the thermal sensitiveness of guar‐based hydrogels is fast, reversible, and intimately related to the weight fraction of the thermosensitive crosslinker in the network. Finally, the monitoring of doxorubicin hydrochloride release has demonstrated the potential of these hydrogels as temperature‐dependent drug release devices. The robust, efficient, and orthogonal approach described herein represents a general approach towards the development of well‐controlled guar‐based hydrogels using α,ω‐diazido crosslinkers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2733–2742, 2010     

Synthesis and thermal characterization of novel poly(tetramethyl‐1,3‐silphenylenesiloxane) derivative with phenol moiety in the main chain

Novel poly(tetramethyl‐1,3‐silphenylenesiloxane) derivative with phenol moiety in the main chain, that is, poly(tetramethyl‐5‐hydroxy‐1,3‐silphenylenesiloxane) ( P1 ), was synthesized and the thermal properties were investigated by differential scanning calorimetry (DSC) and thermogravimetry (TG). P1 was obtained via deprotective hydrogenation of poly(tetramethyl‐5‐benzyloxy‐1,3‐silphenylenesiloxane) ( Pre‐P1 ) catalyzed by 10% palladium on charcoal as well as via direct polycondensation of 3,5‐bis(dimethylhydroxysilyl)phenol ( M2 ). Pre‐P1 was obtained by polycondensation of 1,3‐bis(dimethylhydroxysilyl)‐5‐benzyloxybenzene ( M1 ), catalyzed by 1,1,3,3‐tetramethylguanidinium 2‐ethylhexoate. M1 was prepared by the Grignard reaction using chlorodimethylsilane and 1,3‐dibromo‐5‐benzyloxybenzene followed by the hydrolysis catalyzed by 5% palladium on charcoal. M2 was prepared by deprotective hydrogenation of M1 catalyzed by 10% palladium on charcoal. The obtained P1 was soluble in common organic solvents such as tetrahydrofuran, chloroform, dichloromethane, toluene, and so forth as well as in highly polar solvents as ethanol and methanol in which poly(tetramethyl‐1,3‐silphenylenesiloxane) is insoluble. The glass transition temperature (T_g) of P1 was determined to be 40 °C from DSC, which was much higher than that of poly(tetramethyl‐1,3‐silphenylenesiloxane) (?52 °C), indicating that the intermolecular and/or intramolecular hydrogen bondings based on hydroxyl groups restricted the mobility of the main chain. The temperature at 5% weight loss (T_d5) of P1 (393 °C) determined by TG was lower than that of poly(tetramethyl‐1,3‐silphenylenesiloxane) (ca. 500 °C), indicating that the phenol moieties decline the thermal stability; however, the obtained P1 would promise to be a new reactive‐polymer with phenolic–hydroxyl moieties to develop new functional materials. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 692–701, 2008     

Injectable supramolecular hybrid hydrogels formed by MWNT‐grafted‐poly(ethylene glycol) and α‐cyclodextrin

Poly(ethylene glycol)‐grafted‐multiwalled carbon nanotube (MWNT‐g‐PEG) was synthesized by a coupling reaction and formed inclusion complexes (ICs) after selective threading of the PEG segment of the MWNT‐g‐PEG through the cavities of α‐cyclodextrins (α‐CDs) units. The polypseudorotaxane structures of the as‐obtained hydrogels were confirmed by ¹H NMR, X‐ray diffraction and DSC analyses. The complexation of the PEG segments with α‐CDs and the hydrophobic interaction between the MWNT resulted in the formation of supramolecular hybrid hydrogels with a strong network. Thermal analysis showed that the thermal stability of the hydrogel was substantially improved by up to 100 °C higher than that of native hydrogel. The resultant hybrid hydrogels were found to be thixotropic and reversible, and could be applied as a promising injectable drug delivery system. The mechanical strength of the hybrid hydrogels was greatly improved in comparison with that of the corresponding native hydrogels. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3145–3151, 2010     

pH‐responsive ionic poly(N,N‐diethylaminoethyl methacrylate‐co‐N‐vinyl‐2‐pyrrolidone) hydrogels: Synthesis and swelling properties

A series of an ionic hydrogels composed of N,N‐diethylaminoethyl methacrylamide (DEAEMA), N‐vinyl‐2‐pyrrolidone (VP), and itaconic acid were synthesized by free‐radical cross‐linking copolymerization in water–ethanol mixture by using N,N‐methylenebis(acrylamide) as the cross‐linker, ammonium persulfate as the initiator, and N,N,N′,N′‐tetramethylenediamine as the activator. The swelling behaviors of these hydrogels were analyzed in buffer solutions at various pH. It was observed that the swelling behavior of cross‐linked ionic poly(N,N‐diethylaminoethyl methacrylamide‐co‐N‐vinyl‐2‐pyrrolidone) [P(DEAEMA/VP)] hydrogels at different pH agreed with the modified Flory–Rehner equation based on the affine network model and the ideal Donnan theory. The swelling process in buffer solutions at various pH was found to be Fickian‐type diffusion. The pH‐reversibility and on–off switching properties of the P(DEAEMA/VP) hydrogels may be considered as good candidate to design novel drug‐delivery system. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2819–2828, 2005     

Organic–inorganic hybrid hydrogels involving poly(N‐isopropylacrylamide) and polyhedral oligomeric silsesquioxane: Preparation and rapid thermoresponsive properties

3‐Acryloxypropylhepta(3,3,3‐trifluoropropyl) polyhedral oligomeric silsesquioxane (POSS) was synthesized and used as a modifier to improve the thermal response rates of poly(N‐isopropylacrylamide) (PNIPAM) hydrogel. The radical copolymerization among N‐isopropylacrylamide (NIPAM), the POSS macromer and N,N′‐methylenebisacrylamide was performed to prepare the POSS‐containing PNIPAM cross‐linked networks. Differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA) showed that the POSS‐containing PNIPAM networks displayed the enhanced glass transition temperatures (T_g's) and improved thermal stability when compared with plain PNIPAM network. The POSS‐containing PNIPAM hydrogels exhibited temperature‐responsive behavior as the plain PNIPAM hydrogels. It is noted that with the moderate contents of POSS, the POSS‐containing PNIPAM hydrogels displayed much faster response rates in terms of swelling, deswelling, and re‐swelling experiments than plain PNIPAM hydrogel. The improved thermoresponsive properties of hydrogels have been interpreted on the basis of the formation of the specific microphase‐separated morphology in the hydrogels, that is, the POSS structural units in the hybrid hydrogels were self‐assembled into the highly hydrophobic nanodomains, which behave as the microporogens and promote the contact of PNIPAM chains and water. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 504–516, 2009     

Novel route to poly(p‐phenylene vinylene) polymers

Poly(p‐phenylene vinylene) (PPV), poly(2,5‐dioctyl‐p‐phenylene vinylene) (PDOPPV), and poly[2‐methoxy‐5‐(2′‐ethylhexyloxy)‐p‐phenylene vinylene] (MEHPPV) were synthesized by a liquid–solid two‐phase reaction. The liquid phase was tetrahydrofuran containing 1,4‐bis(bromomethyl)benzene, 1,4‐bis(chloromethyl)‐2,5‐dioctylbenzene, or 1,4‐bis(chloromethyl)‐2‐methoxyl‐5‐(2′‐ethylhexyloxy)benzene as the monomer and a certain amount of tetrabutylammonium bromide as a phase‐transfer catalyst. The solid phase consisted of potassium hydroxide particles with diameters smaller than 2 mm. The experimental results demonstrated that the reaction conversions of PPV and PDOPPV were fairly high (～65%), but the conversion of MEHPPV was only 45%. Moreover, gelation was found in the polymerization processes. As a result, PPV was insoluble and PDOPPV and MEHPPV were partially soluble in the usual organic solvents, such as tetrahydrofuran and chloroform. Soluble PDOPPV and MEHPPV were obtained with chloromethylbenzene or bromomethylbenzene as a retardant regent. The molar mass of soluble PDOPPV was measured to be 2 × 10⁴ g mol^?1, and that of MEHPPV was 6 × 10⁴ g mol^?1. A thin, compact film of MEHPPV was formed via spin coating, and it emitted a yellow light. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 449–455, 2003     

Preparation and properties of polybenzoxazine/poly(imide‐siloxane) alloys: In situ ring‐opening polymerization of benzoxazine in the presence of soluble poly(imide‐siloxane)s

Benzoxazine monomer (Ba) was blended with soluble poly(imide‐siloxane)s in various weight ratios. The soluble poly(imide‐siloxane)s with and without pendent phenolic groups were prepared from the reaction of 2,2′‐bis(3,4‐dicarboxylphenyl)hexafluoropropane dianhydride with α,ω‐bis(aminopropyl)dimethylsiloxane oligomer (PDMS; molecular weight = 5000) and 3,3′‐dihydroxybenzidine (with OH group) or 4,4′‐diaminodiphenyl ether (without OH group). The onset and maximum of the exotherm due to the ring‐opening polymerization for the pristine Ba appeared on differential scanning calorimetry curves around 200 and 240 °C, respectively. In the presence of poly(imide‐siloxane)s, the exothermic temperatures were lowered: the onset to 130–140 °C and the maximum to 210–220 °C. The exotherm due to the benzoxazine polymerization disappeared after curing at 240 °C for 1 h. Viscoelastic measurements of the cured blends containing poly(imide‐siloxane) with OH functionality showed two glass‐transition temperatures (T_g's), at a low temperature around ?55 °C and at a high temperature around 250–300 °C, displaying phase separation between PDMS and the combined phase consisting of polyimide and polybenzoxazine (PBa) components due to the formation of AB‐crosslinked polymer. For the blends containing poly(imide‐siloxane) without OH functionalities, however, in addition to the T_g due to PDMS, two T_g's were observed in high‐temperature ranges, 230–260 and 300–350 °C, indicating further phase separation between the polyimide and PBa components due to the formation of semi‐interpenetrating networks. In both cases, T_g increased with increasing poly(imide‐siloxane) content. Tensile measurements showed that the toughness of PBa was enhanced by the addition of poly(imide‐siloxane). Thermogravimetric analysis showed that the thermal stability of PBa also was enhanced by the addition of poly(imide‐siloxane). © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2633–2641, 2001