trans-[Pt(BCat')Me(PCy3)2]: an experimental case study of reductive elimination processes in Pt-Boryls through associative mechanisms

A stable trans‐(alkyl)(boryl) platinum complex trans‐[Pt(BCat′)Me(PCy₃)₂] (Cat′=Cat‐4‐tBu; Cy=cyclohexyl=C₆H₁₁) was synthesised by salt metathesis reaction of trans‐[Pt(BCat′)Br(PCy₃)₂] with LiMe and was fully characterised. Investigation of the reactivity of the title compound showed complete reductive elimination of Cat′BMe at 80 °C within four weeks. This process may be accelerated by the addition of a variety of alkynes, thereby leading to the formation of the corresponding η²‐alkyne platinum complexes, of which [Pt(η²‐MeCCMe)(PCy₃)₂] was characterised by X‐ray crystallography. Conversion of the trans‐configured title compound to a cis derivative remained unsuccessful due to an instantaneous reductive elimination process during the reaction with chelating phosphines. Treatment of trans‐[Pt(BCat′)Me(PCy₃)₂] with Cat₂B₂ led to the formation of CatBMe and Cat′BMe. In the course of further investigations into this reaction, indications for two indistinguishable reaction mechanisms were found: 1) associative formation of a six‐coordinate platinum centre prior to reductive elimination and 2) σ‐bond metathesis of B? B and C? Pt bonds. Mechanism 1 provides a straightforward explanation for the formation of both methylboranes. Scrambling of diboranes(4) Cat₂B₂ and Cat′₂B₂ in the presence of [Pt(PCy₃)₂], fully reductive elimination of CatBMe or Cat′BMe from trans‐[Pt(BCat′)Me(PCy₃)₂] in the presence of sub‐stoichiometric amounts of Cat₂B₂, and evidence for the reversibility of the oxidative addition of Cat₂B₂ to [Pt(PCy₃)₂] all support mechanism 2, which consists of sequential equilibria reactions. Furthermore, the solid‐state molecular structure of cis‐[Pt(BCat)₂(PCy₃)₂] and cis‐[Pt(BCat′)₂(PCy₃)₂] were investigated. The remarkably short B? B separations in both bis(boryl) complexes suggest that the two boryl ligands in each case are more loosely bound to the Pt^II centre than in related bis(boryl) species.     

trans‐Di­chloro­bis­(tri­phenyl­phosphine‐P)­platinum(II)

Two different crystals (A and B) were used to structurally characterize trans‐[PtCl₂(PPh₃)₂] and to study random and systematic errors in derived parameters. The compound is isomorphous with trans‐[PdCl₂(PPh₃)₂] and with one of the polymorphs of trans‐[PtMeCl(PPh₃)₂] reported previously. Half‐normal probability plot analyses based on A and B show realistic s.u.'s and negligible systematic errors. R.m.s. calculations give very good agreement between A and B, 0.0088 Å. Important geometrical parameters are Pt—P = 2.3163 (11) Å, Pt—Cl = 2.2997 (11) Å, P—Pt—Cl = 87.88 (4) and 92.12 (4)°. Half‐normal probability plots and r.m.s. calculations were also used to compare the title compound with the palladium analogue, showing small systematic differences between the compounds. The torsion angles around the Pt—P bond were found to be very similar to those reported for isomorphous complexes, as well as to the torsion angles around the Pt—As bond in trans‐[PtCl₂(AsPh₃)₂]. The NMR coupling constants for the title compound are similar to Pt—P coupling constants reported for analogous trans complexes.     

Intramolecularly Stabilised Group 10 Metal Stannyl and Stannylene Complexes: Multi‐pathway Synthesis and Observation of Platinum‐to‐Tin Alkyl Transfer

Reaction of [PdClMe(P^N)₂] with SnCl₂ followed by Cl‐abstraction leads to apparent Pd?C bond activation, resulting in methylstannylene species trans‐[PdCl{(P^N)₂SnClMe}][BF₄] (P^N=diaryl phosphino‐N‐heterocycle). In contrast, reaction of Pt analogues with SnCl₂ leads to Pt?Cl bond activation, resulting in methylplatinum species trans‐[PtMe{(P^N)₂SnCl₂}][BF₄]. Over time, they isomerise to methylstannylene species, indicating that both kinetic and thermodynamic products can be isolated for Pt, whereas for Pd only methylstannylene complexes are isolated. Oxidative addition of RSnCl₃ (R=Me, Bu, Ph) to M⁰ precursors (M=Pd or Pt) in the presence of P^N ligands results in diphosphinostannylene pincer complexes trans‐[MCl{(P^N)₂SnCl(R)}][SnCl₄R], which are structurally similar to the products from SnCl₂ insertion. This showed that addition of RSnCl₃ to M⁰ results in formal Sn?Cl bond oxidative addition. A probable pathway of activation of the tin reagents and formation of different products is proposed and the relevancy of the findings for Pd and Pt catalysed processes that use SnCl₂ as a co‐catalyst is discussed.     

Luminescent Benzoquinolate‐Isocyanide Platinum(II) Complexes: Effect of Pt⋅⋅⋅Pt and π⋅⋅⋅π Interactions on their Photophysical Properties

The neutral compounds [Pt(bzq)(CN)(CNR)] (R=tBu ( 1 ), Xyl ( 2 ), 2‐Np ( 3 ); bzq= benzoquinolate, Xyl=2,6‐dimethylphenyl, 2‐Np=2‐napthyl) were isolated as the pure isomers with a trans‐C_bzq,CNR configuration, as confirmed by ¹³C{¹H} NMR spectroscopy in the isotopically marked [Pt(bzq)(¹³CN)(CNR)] (R=tBu ( 1′ ), Xyl ( 2′ ), 2‐Np ( 3′ )) derivatives (δ¹³C_CN≈110 ppm; ¹J(Pt,¹³C)≈1425 Hz]. By contrast, complex [Pt(bzq)(C≡CPh)(CNXyl)] ( 4 ) with a trans‐N_bzq,CNR configuration, has been selectively isolated from [Pt(bzq)Cl(CNXyl)] (trans‐N_bzq,CNR) using Sonogashira conditions. X‐ray diffraction studies reveal that while 1 adopts a columnar‐stacked chain structure with Pt–Pt distances of 3.371(1) Å and significant π???π interactions (3.262 Å), complex 2 forms dimers supported only by short Pt???Pt (3.370(1) Å) interactions. In complex 4 the packing is directed by weak bzq???Xyl and bzq???C≡E (C, N) interactions. In solid state at room temperature, compounds 1 and 2 both show a bright red emission (?=42.1 % 1 , 57.6 % 2 ). Luminescence properties in the solid state at 77 K and concentration‐dependent emission studies in CH₂Cl₂ at 298 K and at 77 K are also reported for 1 , 1·CHCl3 , 2 , 2' , 2·CHCl3 , 3 , 4 .     

Platinum Oxoboryl Complexes as Substrates for the Formation of 1:1, 1:2, and 2:1 Lewis Acid–Base Adducts and 1,2‐Dipolar Additions

The oxoboryl complex trans‐[(Cy₃P)₂BrPt(B?O)] ( 2 ) reacts with the Group 13 Lewis acids EBr₃ (E=Al, Ga, In) to form the 1:1 Lewis acid–base adducts trans‐[(Cy₃P)₂BrPt(B?OEBr₃)] ( 6 – 8 ). This reactivity can be extended by using two equivalents of the respective Lewis acid EBr₃ (E=Al, Ga) to form the 2:1 Lewis acid–base adducts trans‐[(Cy₃P)₂(Br₃Al‐Br)Pt(B?OAlBr₃)] ( 18 ) and trans‐[(Cy₃P)₂(Br₃Ga‐Br)Pt(B?OGaBr₃)] ( 15 ). Another reactivity pattern was demonstrated by coordinating two oxoboryl complexes 2 to InBr₃, forming the 1:2 Lewis acid–base adduct trans‐[{(Cy₃P)₂BrPt(B?O)}₂InBr₃] ( 20 ). It was also possible to functionalize the B?O triple bond itself. Trimethylsilylisothiocyanate reacts with 2 in a 1,2‐dipolar addition to form the boryl complex trans‐[(Cy₃P)₂BrPt{B(NCS)(OSiMe₃)}] ( 27 ).     

On the Reactivity of Platina‐β‐diketones – Synthesis and Characterization of Acylplatinum(II) Complexes

The platina‐β‐diketones [Pt₂{(COR)₂H}₂(μ‐Cl)₂] ( 1 , R = Me a , Et b ) react with phosphines L in a molar ratio of 1 : 4 through cleavage of acetaldehyde to give acylplatinum(II) complexes trans‐[Pt(COR)Cl(L)₂] ( 2 ) (R/L = Me/P(p‐FC₆H₄)₃ a , Me/P(p‐CH₂=CHC₆H₄)Ph₂ b , Me/P(n‐Bu)₃ c , Et/P(p‐MeOC₆H₄)₃ d ). 1 a reacts with Ph₂As(CH₂)₂PPh₂ (dadpe) in a molar ratio of 1 : 2 through cleavage of acetaldehyde yielding [Pt(COMe)Cl(dadpe)] ( 3 a ) (configuration index: SP‐4‐4) and [Pt(COMe)Cl(dadpe)] (configuration index: SP‐4‐2) ( 3 b ) in a ratio of about 9 : 1. All acyl complexes were characterized by ¹H, ¹³C and ³¹P NMR spectroscopy. The molecular structures of 2 a and 3 a were determined by single‐crystal X‐ray diffraction. The geometries at the platinum centers are close to square planar. In both complexes the plane of the acyl ligand is nearly perpendicular to the plane of the complex (88(2)° 2 a , 81.2(5)° 3 a ).     

N‐Heterocyclic Carbene Stabilized Boryl Radicals

The reaction of the 2‐(trimethylsilyl)imidazolium triflate 9 with diarylboron halides (4‐R‐C₆H₄)₂BX (R=H, X=Br; R=CH₃, X=Cl; R=CF₃, X=Cl) afforded the NHC‐stabilized borenium cations 10 a – c . Cyclic voltammetry revealed a linear correlation between the Hammett parameter σ _p of the para substituent and the half‐wave potential. Chemical reduction with decamethylcobaltocene, [(C₅Me₅)₂Co], furnished the corresponding radicals 11 a – c ; their characterization by EPR spectroscopy confirmed the paramagnetic character of 11 a – c , with large hyperfine coupling constants to the boron isotopes ¹¹B and ¹⁰B, while delocalization of the unpaired electron into the NHC is negligible. DFT calculations of the percentage of spin density distribution between the carbene (NHC) and the boryl fragments (BR₂) revealed for 11 a – c a spin density ratio (BR₂/NHC) of ca. 9:1, which underlines their distinct boryl radical character. The molecular structure of the most stable species 11 c was established by X‐ray diffraction analysis.     

On the reactivity of platina‐β‐diketones: a straightforward synthesis of trans‐acetylchlorobis(phosphine)platinum(II) complexes and their reactivity

The platina‐β‐diketone [Pt₂{(COMe)₂H}₂(µ‐Cl)₂] ( 1 ) was found to react with monodentate phosphines to yield acetyl(chloro)platinum(II) complexes trans‐[Pt(COMe)Cl(PR₃)₂] (PR₃ = PPh₃, 2a ; P(4‐FC₆H₄)₃, 2b ; PMePh₂, 2c ; PMe₂Ph, 2d ; P(n‐Bu)₃, 2e ; P(o‐tol)₃, 2f ; P(m‐tol)₃, 2g ; P(p‐tol)₃, 2h ). In the reaction with P(o‐tol)₃ the methyl(carbonyl)platinum(II) complex [Pt(Me)Cl(CO){P(o‐tol)₃}] ( 3a ) was found to be an intermediate. On the other hand, treating 1 with P(C₆F₅)₃ led to the formation of [Pt(Me)Cl(CO){P(C₆F₅)₃}] ( 3b ), even in excess of the phosphine. Phosphine ligands with a lower donor capability in complexes 2 and the arsine ligand in trans‐[Pt(COMe)Cl(AsPh₃)₂] ( 2i ) proved to be subject to substitution by stronger donating phosphine ligands, thus forming complexes trans‐[Pt(COMe)Cl(L)L′] (L/L′ = AsPh₃/PPh₃, 4a ; PPh₃/P(n‐Bu)₃, 4b ) and cis‐[Pt(COMe)Cl(dppe)] ( 4c ). Furthermore, in boiling benzene, complexes 2a – 2c and 2i underwent decarbonylation yielding quantitatively methyl(chloro)platinum(II) complexes trans‐[Pt(Me)Cl(L)₂] (L = PPh₃, 5a ; P(4‐FC₆H₄)₃, 5b ; PMePh₂, 5c ; AsPh₃, 5d ). The identities of all complexes were confirmed by ¹H, ¹³C and ³¹P NMR spectroscopy. Single‐crystal X‐ray diffraction analyses of 2a ·2CHCl₃, 2f and 5b showed that the platinum atom is square‐planar coordinated by two phosphine ligands (PPh₃, 2a ; P(o‐tol)₃, 2f ; P(4F‐C₆H₄)₃, 5b ) in mutual trans position as well as by an acetyl ligand ( 2a, 2f ) and a methyl ligand ( 5b ), respectively, trans to a chloro ligand. Single‐crystal X‐ray diffraction analysis of 3b exhibited a square‐planar platinum complex with the two π‐acceptor ligands CO and P(C₆F₅)₃ in mutual cis position (configuration index: SP‐4‐3). Copyright © 2005 John Wiley & Sons, Ltd.     

1,1‐Ethylboration of alkyn‐1‐yl‐chloro(methyl)silanes: alkenes with chloro(methyl)silyl and diethylboryl groups in cis positions

The 1,1‐ethylboration of alkyn‐1‐yl‐chloro(methyl)silanes, Me₂Si(Cl)? C?C? R ( 1 ) and Me(H)Si(Cl)? C?C? R ( 2 ) [R = Bu ( 2a ), CH₂NMe₂ ( 2b )] requires harsh reaction conditions (up to 20 days in boiling triethylborane), and leads to alkenes in which the boryl and silyl groups occupy cis ((E)‐isomers: 3a , 3b , 5a , 5b ) or trans positions ((Z)‐isomers in smaller quantities: 4b and 6b ). The alkenes are destabilized in the presence of SiH(Cl) and CH₂NMe₂ units ( 5b , 6b ). NMR data indicate hyper‐coordinated silicon by intramolecular N? Si coordination in 3b and 5b , by which, at the same time, weak Si? Cl? B bridges are favoured. Copyright © 2005 John Wiley & Sons, Ltd.     

Darstellung,Kristallstrukturen und Schwingungsspektren von trans‐[Pt(N3)4X2]2–, X = Cl,Br, I

Synthesis, Crystal Structures, and Vibrational Spectra of trans ‐[Pt(N₃)₄X₂]^2–, X = Cl, Br, I By oxidative addition to (n‐Bu₄N)₂[Pt(N₃)₄] with the elemental halogens in dichloromethane trans‐(n‐Bu₄N)₂[Pt(N₃)₄X₂], X = Cl, Br, I are formed. X‐ray structure determinations on single crystals of trans‐(Ph₄P)₂[Pt(N₃)₄Cl₂] (triclinic, space group P1, a = 10.352(1), b = 10.438(2), c = 11.890(2) Å, α = 91.808(12), β = 100.676(12), γ = 113.980(10)°, Z = 1), trans‐(Ph₄P)₂[Pt(N₃)₄Br₂] (triclinic, space group P1, a = 10.336(1), b = 10.536(1), c = 12.119(2) Å, α = 91.762(12), β = 101.135(12), γ = 112.867(10)°, Z = 1) and trans‐(Ph₄P)₂[Pt(N₃)₄I₂] (triclinic, space group P1, a = 10.186(2), b = 10.506(2), c = 12.219(2) Å, α = 91.847(16), β = 101.385(14), γ = 111.965(18)°, Z = 1) reveal, that the compounds crystallize isotypically with octahedral centrosymmetric complex anions. The bond lengths are Pt–Cl = 2.324, Pt–Br = 2.472, Pt–I = 2.619 and Pt–N = 2.052–2.122 Å. The approximate linear Azidoligands with N^α–N^β–N^γ‐angles = 172.1–176.8° are bonded with Pt–N^α–N^β‐angles = 116.2–121.9°. In the vibrational spectra the platinum halogen stretching vibrations of trans‐(n‐Bu₄N)₂[Pt(N₃)₄X₂] are observed in the range of 327–337 (X = Cl), at 202 (Br) and in the range of 145–165 cm^–1 (I), respectively. The platinum azide stretching modes of the three complex salts are in the range of 401–421 cm^–1. Based on the molecular parameters of the X‐ray determinations the IR and Raman spectra are assigned by normal coordinate analysis. The valence force constants are f_d(PtCl) = 1.90, f_d(PtBr) = 1.64, f_d(PtI) = 1.22, f_d(PtN^α) = 2.20–2.27 and f_d(N^αN^β, N^βN^γ) = 12.44 mdyn/Å.     

The synthesis, structure, and reactions of some simple unsaturated σ-hydrocarbylplatinum(II) complexes

Trimethyltin compounds Me₃Sn---R(R = CH=CH₂, CF=CF₂, or CCPh) are selective reagents for the synthesis of unsaturated hydrocarbyl derivatives such as trans-PtCl(R)(PPhEt₂)2, by R/Cl exchange or oxidative addition (e.g., to Pt(PPh₃)₃); single crystal X-ray analyses of two such compounds (R = CH=CH₂ or CCPh) show that the trans-influence of R has only a low sensitivity to hybridisation at carbon, with sp³ > sp sp².     

Disilene R*RSi=SiRR* (R* = SitBu3) mit siliciumgebundenen Me‐ und Ph‐Gruppen R: Bildung,Nachweis, Thermolyse,Struktur: Verbindungen des Siliciums. 154 [1]. Ungesättigte Siliciumverbindungen. 61 [1]

Compounds of Silicon. 154 [1]. Unsaturated Silicon Compounds. 61 [1] Disilenes R*RSi=SiRR* (R* = SitBu₃) with Silicon‐Bound Me and Ph Groups R: Formation, Identification, Thermolysis, Structure Dehalogenations of the 1, 2‐disupersilylsilanes R*MeBrSi—SiBrMeR* (gauche : trans 1.15 : 1.00) and R*PhClSi—SiBrPhR* (gauche : trans = 2.7 : 1.0) in THF with equimolar amounts of NaR* (R* = SitBu₃ = Supersilyl) lead at —78 °C under exchange of bromine for sodium to the disilanides R*MeBrSi—SiNaMeR* and R*PhClSi—SiNaPhR* which are identified by protonation and bromination (formation of R*RXSi—SiX′RR* with R = Me, X/X′ = Br/H, Br/Br: gauche : trans = 1.15 : 1.00, and R = Ph, X/X′ = Cl/H, Cl/Br: gauche : trans = 2.7 : 10, respectively). These eliminate at about —55 °C NaHal with formation of non‐isolable trans‐R*MeSi=SiMeR* and isolable trans‐R*PhSi=SiPhR*. The intermediate existence of the disilene R*MeSi=SiMeR* could be proved by trapping it with PhC≡CPh (formation of a [2+2] cycloadduct; X‐ray structure analysis). In the absence of trapping agents, R*MeSi=SiMeR* decomposes into a mixture of substances, the main product of which is R*MeHSi—SiMeR*—SiHMeR*. The light yellow disilene R*PhSi=SiPhR* has been characterized by spectroscopy (Raman: ν(Si=Si) = 592 cm^—1; UV/VIS: λ_max = 398 nm with ∈ = 1560; ²⁹Si‐NMR: δ(>Si=) = 128 ppm) and by X‐ray structure analysis (planar central framework >Si=Si<; Si=Si distance 2.182Å). R*PhSi=SiPhR* is reduced by lithium in THF with formation of a red radical anion which decomposes at room temperature into hitherto non‐identified products. At about 70 °C, R*PhSi=SiPhR* decomposes with intramolecular insertion of the Si=Si group into a C—H bond of a Ph group and with change of configuration of the R* groups, which at first are trans then cis‐positioned (X‐ray structure analysis of the thermolysis product).     

Photoinduced Isomerization of Potassium Polyfluoroalk‐1‐enyltrifluoroborates

The UV irradition of K [RCF=CFBF₃] [R = C₄F₉ (trans), C₂F₅ (cis), C₆F₁₃ (cis), Cl (cis/trans 1 : 1)] in acetone led to cis/trans‐isomerization with a final cis/trans composition 7 : 3. In the case of R = C₄H₉ (trans) or C₃F₇O (cis/trans 25 : 75) the photoisomerization was accompanied by a partial decomposition.     

Some platinum(II) complexes derived from aromatic alkynes

Several trans‐platinum(II) complexes, of the type R′? {Pt(PBu₃)₂}? R″? {Pt(PR₃)₂}? R′, where R′ and R″ are groups derived from a series of aromatic alkynes and diynes, have been prepared and characterized. Extensive spectroscopic data for these and other known related complexes are presented. A more precise structural study of trans‐Pt(C≡CC₆H₄C≡CPh)₂(PBu₃)₂ (cf. Z. Kristallogr. 1998; 213: 483) is reported. Copyright © 2002 John Wiley & Sons, Ltd.     

trans‐Dichloro(dimethyl sulfide‐κS)(pyridine‐κN)platinum(II)

The structure of the title compound, [PtCl₂(C₅H₅N)(C₂H₆S)], consists of discrete mol­ecules in which the Pt‐atom coordination is slightly distorted square planar. The Cl atoms are trans to each other, with a Cl—Pt—Cl angle of 176.60 (7)°. The pyridine ligand is rotated 64.5 (2)° from the Pt square plane and one of the Pt—Cl bonds essentially bisects the C—S—C angle of the di­methyl sulfide ligand. In the crystal structure, there are extensive weak C—H⋯Cl interactions, the shortest of which connects mol­ecules into centrosymmetric dimers. A comparison of the structural trans influence on Pt—S and Pt—­N distances for PtS(CH₃)₂ and Pt(pyridine) fragments, respectively, in square‐planar Pt^II complexes is presented.     

Platinum(II) Mixed Ligand Complexes with Thiourea Derivatives,Dimethyl Sulphoxide and Chloride: Syntheses,Molecular Structures,and ESCA Data

The platinum(II) mixed ligand complexes [PtCl(L^1‐6)(dmso)] with six differently substituted thiourea derivatives HL, R₂NC(S)NHC(O)R′ (R = Et, R′ = p‐O₂N‐Ph: HL¹; R = Ph, R′ = p‐O₂N‐Ph: HL²; R = R′ = Ph: HL³; R = Et, R′ = o‐Cl‐Ph: HL⁴; R₂N = EtOC(O)N(CH₂CH₂)₂N, R′ = Ph: HL⁵) and Et₂NC(S)N=CNH‐1‐Naph (HL⁶), as well as the bis(benzoylthioureato‐κO, κS)‐platinum(II) complexes [Pt(L^{1, 2})₂] have been synthesized and characterized by elemental analysis, IR, FAB(+)‐MS, ¹H‐NMR, ¹³C‐NMR, as well as X‐ray structure analysis ([PtCl(L¹)(dmso)] and [PtCl(L^{3, 4})(dmso)]) and ESCA ([PtCl(L^{1, 2})(dmso)] and [Pt(L^{1, 2})₂]). The mixed ligand complexes [PtCl(L)(dmso)] have a nearly square‐planar coordination at the platinum atoms. After deprotonation, the thiourea derivatives coordinate bidentately via O and S, DMSO bonds monodentately to the Pt^II atom via S atom in a cis arrangement with respect to the thiocarbonyl sulphur atom. The Pt—S‐bonds to the DMSO are significant shorter than those to the thiocarbonyl‐S atom. In comparison with the unsubstituted case, electron withdrawing substituents at the phenyl group of the benzoyl moiety of the thioureate (p‐NO₂, o‐Cl) cause a significant elongation of the Pt—S(dmso)‐bond trans arranged to the benzoyl‐O—Pt‐bond. The ESCA data confirm the found coordination and bonding conditions. The Pt 4f_7/2 electron binding energies of the complexes [PtCl(L^{1, 2})(dmso)] are higher than those of the bis(benzoylthioureato)‐complexes [Pt(L^{1, 2})₂]. This may indicate a withdrawal of electron density from platinum(II) caused by the DMSO ligands.     

Insights into the Intramolecular Donor Stabilisation of Organostannylene Palladium and Platinum Complexes: Syntheses,Structures and DFT Calculations

The syntheses of the transition metal complexes cis‐[(4‐tBu‐2,6‐{P(O)(OiPr)₂}₂C₆H₂SnCl)₂MX₂] ( 1 , M=Pd, X=Cl; 2 , M=Pd, X=Br; 3 , M=Pd, X=I; 4 , M=Pt, X=Cl), cis‐[{2,6‐(Me₂NCH₂)₂C₆H₃SnCl}₂MX₂] ( 5 , M=Pd, X=I; 6 , M=Pt, X=Cl), trans‐[{2,6‐(Me₂NCH₂)₂C₆H₃SnI}₂PtI₂] ( 7 ) and trans‐[(4‐tBu‐2,6‐{P(O)(OiPr)₂}₂ C₆H₂SnCl)PdI₂]₂ ( 8 ) are reported. Also reported is the serendipitous formation of the unprecedented complexes trans‐[(4‐tBu‐2,6‐{P(O)(OiPr)₂}₂C₆H₂SnCl)₂ Pt(SnCl₃)₂] ( 10 ) and [(4‐tBu‐2,6‐{P(O) (OiPr)₂}₂C₆H₂SnCl)₃Pt(SnCl₃)₂] ( 11 ). The compounds were characterised by elemental analyses, ¹H, ¹³C, ³¹P, ¹¹⁹Sn and ¹⁹⁵Pt NMR spectroscopy, single‐crystal X‐ray diffraction analysis, UV/Vis spectroscopy and, in the cases of compounds 1 , 3 and 4 , also by Mössbauer spectroscopy. All the compounds show the tin atoms in a distorted trigonal‐bipyramidal environment. The Mössbauer spectra suggest the tin atoms to be present in the oxidation state III. The kinetic lability of the complexes was studied by redistribution reactions between compounds 1 and 3 as well as between 1 and cis‐[{2,6‐(Me₂NCH₂)₂C₆H₃SnCl}₂PdCl₂]. DFT calculations provided insights into both the bonding situation of the compounds and the energy difference between the cis and trans isomers. The latter is influenced by the donor strength of the pincer‐type ligands.     

Cis‐ and trans‐influences in [PtCl2(SPh2)2]

Both cis‐ and trans‐di­chloro­bis­(di­phenyl ­sulfide)­platinum(II), [PtCl₂(C₁₂H₁₀S)₂], crystallize as mononuclear pseudo‐square‐planar complexes. In the cis compound, the Pt—Cl distances are 2.295 (2) and 2.319 (2) Å, and the Pt—S distances are 2.280 (2) and 2.283 (2) Å. In the trans compound, Pt is located on a centre of inversion and the Pt—Cl and Pt—S distances are 2.2786 (15) and 2.3002 (12) Å, respectively.     

Cyanoalkyl Complexes of Platinum (II). I. Preparation and Spectroscopic Properties

The oxidative addition of XRCN to PtL₄ yields cis-and/or trans-PtX(RCN)L₂ (X = Cl, Br; R = (CH₂)_n, n = 1, 2, 3; L = PPh₃, PPh₂CH₃, AsPh₃). L is readily displaced by more basic phosphines or by a diphosphine. In each case the trans complex is the thermodynamically more stable isomer and cis-trans isomerization catalyzed by free L occurs in dichloromethane. Insertion of CO in the σ Pt? C bond takes place quantitatively in the case of cyanoethyl and cyanopropyl. Abstraction of X by AgBF₄ gives cis or trans cationic complexes with N-bonded CN group.     

The Reaction of 2‐X‐1, 2‐Difluoroalk‐1‐enyldifluoroboranes with Xenon Difluoride. A Methodical Approach to 1, 2‐Difluoroalk‐1‐enylxenon(II) Salts

2‐X‐1, 2‐Difluoroalk‐1‐enylxenon(II) salts were prepared by the reaction of XeF₂ with XCF=CFBF₂ (X = F, trans‐H, cis‐Cl, trans‐Cl, cis‐CF₃, cis‐C₂F₅) but no organoxenon(II) compounds were obtained when the trans‐isomers of boranes, trans‐XCF=CFBF₂ (X = CF₃, C₄F₉, C₄H₉, Et₃Si), were used under similar conditions.