Solvothermal Synthesis,Crystal Structures,and Magnetic Properties of Two Organically Templated Iron Sulfates with Chain Structures

Two new one‐dimensional (1D) organically templated iron(III) sulfates [C₂NH₈]₃ [Fe₃(μ₃‐O)₂(SO₄)₄] ( 1 ) and [C₂N₂H₁₀][C₂NH₇]_0.5[FeF(SO₄)₂] ( 2 ) were synthesized under solvothermal conditions and characterized by single‐crystal X‐ray diffraction, powder X‐ray diffraction (XRD), FT‐IR spectroscopy, elemental analyses, ICP analyses, and thermogravimetric analyses. Single‐crystal structure analysis reveals that both compounds show linear‐chain structures, involving FeO₆ (FeF₂O₄) octahedra and SO₄ tetrahedra. The magnetic properties of the two compounds have also been investigated.     

An Open‐Framework Germanate with Polycubane‐Like Topology

Body‐centered Ge ₉ parallelepiped building blocks form the basis of the structure of [Ge₉O₁₈(OH)₄]⋅2 (H₂ppz)⋅0.5 (H₂O) (ASU‐14, ppz=piperazine). In this new structure type for an open‐framework germanate (see picture for a section of the structure) the building blocks are linked together at each of their eight vertices to give the rare polycubane topology with an intersecting channel system of ten‐ and eight‐membered rings (pore sizes 5×6 and 4×4 Ų, respectively) in which the piperazinium cations and water molecules reside.     

Synthesis,Crystal Structure,and Characterization of a Novel Metallo‐Organically‐Templated Pentaborate with Mixed Ligands

A novel metallo‐organically templated pentaborate with layered framework, [Cd(TETA)(C₂H₃O₂)][B₅O₆(OH)₄] ( 1 ) (TETA = triethylenetramine), was synthesized under mild solvothermal conditions. The structure was determined by single‐crystal X‐ray diffraction and further characterized by FT‐IR spectroscopy, elemental analysis, thermogravimetric analysis, and photoluminescence spectroscopy. The structure consists of an isolated polyborate anion [B₅O₆(OH)₄]^– and the cadmium complex cation of [Cd(TETA)(C₂H₃O₂)]⁺, which contains both organic amine and organic acid ligands. The [B₅O₆(OH)₄]^– units are connected together by hydrogen bonds, and a 2D sheet‐like framework with rectangle‐like 12‐membered boron rings are formed. The [Cd(TETA)(C₂H₃O₂)]⁺ complex cations are located in the free space between the layers and connect the adjacent borate layers through hydrogen bonds to form a three‐dimensional supramolecular network. The luminescent properties of the compound were studied for the first time in the series of metallo‐organically‐templated pentaborates, and a blue luminescence occurs with an emission maximum at 468 nm upon excitation at 397 nm.     

Structural Basis for the Identification of an i‐Motif Tetraplex Core with a Parallel‐Duplex Junction as a Structural Motif in CCG Triplet Repeats

CCG triplet repeats can fold into tetraplex structures, which are associated with the expansion of (CCG)_n trinucleotide sequences in certain neurological diseases. These structures are stabilized by intertwining i‐motifs. However, the structural basis for tetraplex i‐motif formation in CCG triplet repeats remains largely unknown. We report the first crystal structure of a CCG‐repeat sequence, which shows that two dT(CCG)₃A strands can associate to form a tetraplex structure with an i‐motif core containing four C:C⁺ pairs flanked by two G:G homopurine base pairs as a structural motif. The tetraplex core is attached to a short parallel‐stranded duplex. Each hairpin itself contains a central CCG loop in which the nucleotides are flipped out and stabilized by stacking interactions. The helical twists between adjacent cytosine residues of this structure in the i‐motif core have an average value of 30°, which is greater than those previously reported for i‐motif structures.     

Synthesis,Structure, and Photoluminescence Properties of an Organically‐Templated Uranyl Selenite

The organically‐templated uranyl selenite, (H₂en)[(UO₂)(SeO₃)(HSeO₃)](NO₃) · 0.5H₂O ( 1 ) (en = 1,2‐ethylenediamine) was synthesized and characterized by elemental analyses, IR spectroscopy, TG, and single‐crystal X‐ray diffraction. Compound 1 crystallizes in the orthorhombic system, space group Pbca, with a = 13.170(3) Å, b = 11.055(2) Å, c = 18.009(4) Å, V = 2621.8(9) ų, M = 1316.19, Z = 4, D_cal = 3.334 g · cm^–3, μ(Mo‐K_α) = 17.998 mm^–1, GOF = 1.059, R₁ = 0.0263, wR₂ = 0.0532 [I>2σ(I)]. The X‐ray diffraction analysis reveals that compound 1 has a three‐dimensional (3D) supramolecular structure. It contains negatively charged [UO₂(HSeO₃)(SeO₃)]^– inorganic anion layers and is balanced by [H₂en]²⁺ cations and NO₃^– anions located in the interlayers. Furthermore, the photoluminescence properties of 1 were investigated.     

Synthesis,Characterization, and Structural Comparisons of the First Neodymium(III) Sulfite‐Acetate Crystal Structure

The first lanthanide sulfite compound with a secondary ligand, Nd(SO₃)(C₂H₃O₂), was hydrothermally synthesized and solved with single‐crystal X‐ray diffraction. In order to prevent the facile oxidation of the sulfite to sulfate, careful control of both pH and reaction temperature were required for successful synthesis of the title compound; even slight changes in conditions allow for the facile oxidation of sulfite to sulfate and yields the known [Nd(C₂H₃O₂)(SO₄)(H₂O)₂] structure. This two‐dimensional sheet topology further expands the chemistry of lanthanide sulfite extended structures and also allows for easy structural comparisons to other lanthanide sulfite compounds and the above mentioned neodymium sulfate‐acetate compound.     

Synthesis,Crystal Structure and Characterization of the Copper Iron Phosphate Cu8Fe2O5(PO4)4

The system CuO‐Fe₂O₃‐P₂O₅ has been investigated by means of the solid state reaction between CuO, Fe₂O₃ and (NH₄)₂HPO₄ in quartz crucibles at 900 °C. The powder samples were characterized by X‐ray diffraction, IR spectroscopy and TG/DTA. Single crystals of a new quaternary phase Cu₈Fe₂P₄O₂₁ were achieved by cooling from the melt of the compound in a sealed, evacuated quartz ampoule. Cu₈Fe₂O₅(PO₄)₄ crystallizes in the monoclinic space group C2/m (No 12) with a = 15.9733(8) Å, b = 5.9438(3) Å, c = 9.5530(5) Å, β = 113.76(1)°, Z = 2. The three‐dimensional framework consists of [FeO₆] octahedra, three different [CuO₅] polyhedra and [PO₄] tetrahedra. Cu₈Fe₂P₄O₂₁ exhibits an incongruently melting point at 945 °C.     

Crystal Structures and Emitting Properties of Trifluoromethylaminoquinoline Derivatives: Thermal Single‐Crystal‐to‐Single‐Crystal Transformation of Polymorphic Crystals That Emit Different Colors

2,4‐Trifluoromethylquinoline (TFMAQ) derivatives that have amine ( 1 ), methylamine ( 2 ), phenylamine ( 3 ), and dimethylamine ( 4 ) substituents at the 7‐position of the quinoline ring were prepared and crystallized. Six crystals including the crystal polymorphs of 2 (crystal GB and YG) and 3 (crystal B and G) were obtained and characterized by X‐ray crystallography. In solution, TFMAQ derivatives emitted relatively strong fluorescence (${\lambda {{{\rm f}\hfill \atop {\rm max}\hfill}}}$ =418–469 nm and Φ_f(s)=0.23–0.60) depending on the solvent polarity. From Lippert–Mataga plots, Δμ values in the range of 7.8–14 D were obtained. In the crystalline state, TFMAQ derivatives emitted at longer wavelengths (${\lambda {{{\rm f}\hfill \atop {\rm max}\hfill}}}$ =464–530 nm) with lower intensity (Φ_f(c)=0.01–0.28) than those in n‐hexane solution. The polymorphous crystals of 2 and 3 emitted different colors: 2 , ${\lambda {{{\rm f}\hfill \atop {\rm max}\hfill}}}$ =470 and 530 nm with Φ_f(c)=0.04 and approximately 0.01 for crystal GB and YG, respectively; and 3 , ${\lambda {{{\rm f}\hfill \atop {\rm max}\hfill}}}$ =464 and 506 nm with Φ_f(c)=0.28 and approximately 0.28 for crystal B and G, respectively. In both crystal polymorphs of 2 and 3 , crystals GB and G showed emission color changes by heating/melting/cooling cycles that were representative. By following the color changes in heating at the temperature below the melting point with X‐ray diffraction measurements and X‐ray crystallography, the single‐crystal‐to‐single‐crystal transformations from crystal GB to YG for 2 and from crystal B to G for 3 were revealed.     

Synthesis,Structure and High Thermal Stability of a Novel Three‐dimensional Zinc(II) Complex with an Unsymmetrical Rigid‐flexible Ligand

A novel metal‐organic framework, [Zn(C₁₀H₈O₅)]_n ( 1 ) (C₁₀H₈O₅ = 2‐(4‐carboxylatophenoxy)propionate), was synthesized and characterized by elemental analysis, IR spectroscopy, X‐ray crystallography and thermogravimetric analysis. The crystal structure study reveals that each zinc atom is coordinated by four oxygen atoms from four different ligands to obtain a distorted tetrahedron. The rigid carboxyl group bridges two adjacent zinc atoms to form a dimer of eight‐membered rings, whereas the flexible carboxyl group bridges two adjacent dimers to form 1D chains along the a axis. Two adjacent 1D chains are interconnected by the ligands to produce 2D layers. These layers are further stabilized by intermolecular hydrogen bonds to construct a 3D framework showing high thermal stability (445 °C).     

Homoleptic Platinum(II) and Palladium(II) Organothiolates and Phenylselenolates: Solvothermal Synthesis,Structural Determination,Optical Properties,and Single‐Source Precursors for PdSe and PdS Nanocrystals

Homoleptic d⁸‐metal organothiolates and phenylselenolates [M(EC₆H₅)₂]_∞ (E=S, M=Pt 1 , M=Pd 2 , M=Ni 5 ; E=Se, M=Pt 3 , M=Pd 4 ) were prepared as crystalline solids under solvothermal conditions. Their structures were solved using powder X‐ray diffraction data. In each case, the EC₆H₅ (E=S, Se) ligand binds to two metal ions (M=Pt, Pd, and Ni) to form chain‐like structures with planar (in 1 ) or zig‐zag (in 2 , 3 , 4 , 5 ) conformations. The [M(SR)₂]_∞ complexes (M=Pt, R=4‐tert‐butylphenyl 6 ; R=2‐naphthyl 8 ; R=4‐nitrophenyl 10 and M=Pd, R=4‐tert‐butylphenyl 7 ; R=2‐naphthyl 9 ; R=4‐nitrophenyl 11 ) were prepared under similar solvothermal conditions. Based on the XPS binding energies and elemental analyses, complexes 6 , 7 , 8 , 9 , 10 , 11 have the same [M(SR)₂]_∞ formulation as 1 and 2 . The cyclic complex [Pd₆(SCH₃)₁₂] 12 was prepared as a crystalline solid by solvothermal annealing treatment of the amorphous precipitate. A chain‐like polymer structure is proposed for both [Pd(SC₁₂H₂₅)₂]_∞ 13 and [Pd(SC₁₆H₃₃)₂]_∞ 14 ; these polymeric chains self‐assemble to give layer‐like structures. Solid‐state diffuse reflectance spectra reveal that the optical band gap E_g (eV) of complexes 1 , 6 , 8 , 10 and of 2 , 7 , 9 , 11 are in the range of 2.10–3.00 eV and 2.10–2.63 eV, respectively, and 5 has the lowest E_g value (1.72 eV). Heating solid samples of 4 and 13 under solvothermal conditions afforded phase‐pure Pd₁₇Se₁₅ and PdS nanocrystals, respectively. Field‐effect transistors fabricated with a drop‐cast thin film made from Pd₁₇Se₁₅ nanocrystals prior treated with an ethanolic solution of 1‐hexadecanethiol displayed ambipolar charge transporting properties with hole and electron mobility being 7×10^?2 cm² V^?1 s^?1 and 6×10^?2 cm² V^?1 s^?1, respectively.     

具有方石英拓扑结构的微孔硫代锗锌酸盐的溶剂热合成与表征

微孔化合物是一类重要的材料,广泛地应用于催化、吸附及分离等领域。目前已知的微孔材料绝大多数为无机氧化物或氟氧化物,20世纪80年代末,Bedard等首先报道了微孔硫属化物的合成．这类化合物除具有微孔材料的性质外,还具有半导体性质,在电催化、光催化、太阳能电池及新型光电子材料如量子点(dots)及反量子点(antidots)材料方面有着广泛的应用前景,     

Synthesis and Characterization of 5‐(1,2,4‐Triazol‐3‐yl)tetrazoles with Various Energetic Functionalities

In this contribution the synthesis and full structural as well as spectroscopic characterization of three 5‐(1,2,4‐triazol‐3‐yl)tetrazoles along with selected energetic moieties like nitro, nitrimino, and azido groups are presented. The main goal is a comparative study on the influence of those variable energetic moieties on structural and energetic properties. A complete characterization including IR and Raman as well as multinuclear NMR spectroscopy of all compounds is presented. Additionally, X‐ray crystallographic measurements were performed and reveal insights into structural characteristics as well as inter‐ and intramolecular interactions. The standard enthalpies of formation were calculated for all compounds at the CBS‐4M level of theory and reveal high positive heats of formation for all compounds. The calculated detonation parameters (using the EXPLO5.05 program) are in the range of 8000 m s^?1 (8097 m s^?1 ( 5 ), 8020 m s^?1 ( 6 ), 7874 m s^?1 ( 7 )). As expected, the measured impact and friction sensitivities as well as decomposition temperatures strongly depend on the energetic moiety at the triazole ring. The C? C connection of a triazole ring with its opportunity to introduce a large variety of energetic moieties and a tetrazole ring, implying a large energy content, leads to the selective synthesis of primary and secondary explosives.     

Synthesis and Structures of N‐Alkyl‐1,13‐dimethoxychromeno‐ [2,3,4‐kl]acridinium Salts: The Missing Azaoxa[4]helicenium

Helical structures are interesting due to their inherent chirality. Helicenium ions are triarylmethylium structures twisted into configurationally stable helicenes through the introduction of two heteroatom bridges between the three aryl substituents. Of the configurationally stable [4]helicenium ions, derivatives with sulfur, oxygen and nitrogen bridges have already been synthesised. However, one [4]helicenium ion has proven elusive, until now. We present herein the first synthesis of the 1,13‐dimethoxychromeno[2,3,4‐kl]acridinium (DMCA⁺) [4]helicenium ion. A series of six differently N‐substituted DMCA⁺ ions as their hexafluorophosphate salts are reported. Their cation stability was evaluated and it was found that DMCA⁺ is ideally suited as a phase‐transfer catalyst with a pK_R+ of 13.0. The selectivity of nucleophilic addition to the central carbon atom of DMCA⁺ has been demonstrated with diastereotopic ratios of up to 1:10. The single‐crystal structures of several of the DMCA⁺ salts were determined, and structural differences between N‐aryl‐ and N‐alkyl‐substituted cations were observed. The results of a comparative study of the photophysics of the [4]helicenium ions are presented. DMCA⁺ is found to be a potent red‐emitting dye with a fluorescence quantum yield of 20 % in apolar solvents and a fluorescence lifetime of 12 ns. [4]Helicenium ions, including DMCA⁺, all suffer from solvent‐induced quenching, which reduces the fluorescence quantum yields significantly (?_fl<5 %) in polar solvents. A difference in photophysical properties is observed between N‐aryl‐ and N‐alkyl‐substituted DMCA⁺, which has tentatively been attributed to a difference in molecular conformation.     

Synthesis and Characterization of Two Formyl 2‐Tetrazenes

The synthesis of two formyl 2‐tetrazenes, namely, (E)‐1‐formyl‐1,4,4‐trimethyl‐2‐tetrazene ( 2 ) and (E)‐1,4‐diformyl‐1,4‐dimethyl‐2‐tetrazene ( 3 ), by oxidation of (E)‐1,1,4,4‐tetramethyl‐2‐tetrazene ( 1 ) using potassium permanganate in acetone solution is presented. Compound 3 was also synthesized in an improved yield from the oxidation of 1‐formyl‐1‐methylhydrazine ( 4a ) using potassium permanganate in acetone. Both compounds 2 and 3 were characterized by analytical (elemental analysis, GC‐MS) and spectroscopic methods (¹H, ¹³C, and ¹⁵N NMR spectroscopy, and IR and Raman spectroscopy). In addition, the solid‐state structures of the compounds were confirmed by low‐temperature X‐ray analysis. (Compound 2 : triclinic; space group P‐1; a=5.997(1) Å, b=8.714(1) Å, c=13.830(2) Å; α=107.35(1)°, β=90.53(1)°, γ=103.33(1)°; V_UC=668.9(2) ų; Z=4; ρ_calc=1.292 cm^?3. Compound 3 : monoclinic; space group P2₁/c; a=5.840(2) Å, b=7.414(3) Å, c=8.061(2) Å; β=100.75(3)°; V_UC=342(2) ų; Z=2; ρ_calc=1.396 g cm^?3.) The vibrational frequencies of compounds 2 and 3 were calculated using the B3LYP method with a 6‐311+G(d,p) basis set. We also computed the natural bond orbital (NBO) charges using the rMP2/aug‐cc‐pVDZ method and the heats of formation were determined on the basis of their electronic energies. Furthermore, the thermal stabilities of these compounds, as well as their sensitivity towards classical stimuli, were also assessed by differential scanning calorimetry and standard BAM tests, respectively. Lastly, the attempted synthesis of (E)‐1,2,3,4‐tetraformyl‐2‐tetrazene ( 6 ) is also discussed.     

Synthesis,Structures, and Light‐Induced Transformation of Keto‐Functionalized Selenidogermanate Complexes

A double‐decker (DD) type selenidogermanate complex with C=O functionalized organic decoration, [(R¹Ge₄)Se₆] ( 1 , R¹ = CMe₂CH₂COMe), was synthesized by reaction of R¹GeCl₃ with Na₂Se, and subsequently underwent a light‐induced transformation reaction to yield [Na(thf)₂][(RGe^IV)₂(RGe^III)(Ge^IIISe)Se₅] ( 2 ). Similar to the observations reported previously for the Sn/S homologue of 1 , the product comprises a mixed‐valence complex with a newly formed Ge–Ge bond. However, different from the transformation of the tin sulfide complex, the selenidogermanate precursor did not produce a paddle‐wheel‐like dimer of the DD type structure, but led to the formation of a noradamantane (NA) type architecture, which has so far been restricted to the Si/Se and Ge/Te elemental combination.     

Syntheses and Characterization of Cyanide‐Bridged Bimetallic Compounds Zn(terpy)(H2O)M(CN)4 (terpy = 2,2′:6′,2′′‐ter­pyridine; M = Ni,Pd, Pt) with Linear Chains

The self‐assembly reaction of zinc ions with tetracyanometalates in the presence of the tridentate chelated ligand 2,2′:6′,2′′‐terpyridine (terpy) yielded three cyanide‐bridged bimetallic compounds of general formula Zn(terpy)(H₂O)M(CN)₄ [M = Ni ( 1 ), Pd ( 2 ), Pt ( 3 )]. Compounds 1 – 3 were characterized by X‐ray diffraction (XRD), infrared spectroscopy (IR), and thermogravimetric (TG) analysis. Single‐crystal XRD analysis revealed that compounds 1 – 3 are isostructural and the structure consists of [Zn(terpy)(H₂O)]²⁺ moieties and [M(CN)₄]^2– units linked alternatively to generate a one‐dimensional (1D) linear chain. The chains are further connected together through hydrogen bonding and π–π stacking interactions, forming a 3D supramolecular network. IR spectroscopic analysis indicated the presence of cyanide groups and terpy ligands in the structure. TG and powder XRD results showed that compounds 1 – 3 have higher thermal stabilities and exhibited irreversible for desorption/resorption of one coordinated water molecule.     

A Fluorescent Blue Phosphazene Dye: Synthesis,Structure and Optical Properties of 1,6‐Bis(Dimethylamino)‐2,5,7,10‐Tetraazo‐1,6λ5‐Diphosphapyrene

Herein we report on the synthesis, structure, and optical properties of the fluorescent blue phosphazene dye 1,6‐bis(dimethylamino)‐2,5,7,10‐tetraazo‐1,6λ⁵‐diphosphapyrene, which was isolated as the unexpected product of the reaction between 1,4,5,8‐(tetraamino)naphthalene and [P(NMe₂)₃Br]Br. This dye, which turned out to be soluble in water and a range of organic solvents (including hexane, tetrahydrofuran / petroleum ether, acetonitrile, and ethanol), was structurally characterized by XRD. Its absorption as well as emission spectra and their sensitivity to pH variations were analyzed. The experimental work is complemented by quantum chemical calculations on the possible intermediate on the way to the isolated product and on its pK_a value.